writepages() needs to write dirty pages to OSD in strict order of
snapshot context. It must first write dirty pages associated with
the oldest snapshot context. In the write range case, dirty pages
in the specified range can be associated with newer snapc. They
are not writeable until we write all dirty pages associated with
the oldest snapc.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In range cyclic mode, writepages() should first write dirty pages
in range [writeback_index, (pgoff_t)-1], then write pages in range
[0, writeback_index -1]. Besides, if writepages() encounters a page
that beyond EOF, it should restart from the beginning.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Remove two variables and define variables of same type together.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_writepages_start() supports writing non-continuous pages.
If it encounters a non-dirty or non-writeable page in pagevec,
it can continue to check the rest pages in pagevec.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Otherwise, the page left in state that page is associated with a
snapc, but (PageDirty(page) || PageWriteback(page)) is false.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
capsnap's size is set by __ceph_finish_cap_snap(). If capsnap is under
writing, its size is zero. In this case, get_oldest_context() should
read i_size. Besides, ceph_writepages_start() should re-check capsnap's
size after dirty pages get locked.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Both set_page_dirty and truncate_complete_page should be called
for locked page, they can't race with each other.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If we create capsnap when snap realm's context does not change, the
new capsnap's snapc is equal to ci->i_head_snapc. Page writeback code
can't differentiates dirty pages associated with the new capsnap from
dirty pages associated with i_head_snapc.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It's possible that we create a cap snap while there is pending
vmtruncate (truncate hasn't been processed by worker thread).
We should truncate dirty pages beyond capsnap->size in that case.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If caps for importer mds exists, but cap id mismatch, client should
have received corresponding import message. Because cap ID does not
change as long as client holds the caps.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The script “checkpatch.pl” pointed information out like the following.
Comparison to NULL could be written ...
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The script "checkpatch.pl" pointed information out like the following.
WARNING: void function return statements are not generally useful
Thus remove such a statement in the affected function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When a user requests SEEK_HOLE or SEEK_DATA with a negative offset
ceph_llseek should return -ENXIO. Currently -EINVAL is being returned for
SEEK_DATA and 0 for SEEK_HOLE.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Improve accuracy of statfs reporting for Ceph filesystems comprising
exactly one data pool. In this case, the Ceph monitor can now report
the space usage for the single data pool instead of the global data
for the entire Ceph cluster. Include support for this message in
mon_client and leverage it in ceph/super.
Signed-off-by: Douglas Fuller <dfuller@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Inode can be moved between snap realms. It's possible inode is moved
into a snap realm whose seq number is smaller than old snap realm's.
So there is no guarantee that seq number inode's snap context always
increases.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Before sending new flushsnap message, check if there are old
flushsnap messages that need to be re-sent. If there are, re-send
old messages first. This guarantees ordering of flushsnap messages.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Need to drop cap reference before retry. Besides, it's better to
redo file write checks for each retry because we re-lock inode.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Snapdir inode has no capability. __choose_mds() should choose mds
base on capabilities of snapdir's parent inode.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In LSSNAP case, req->r_dentry is already set to snapdir dentry.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ensure that when writeback errors are marked that we report those to all
file descriptions that were open at the time of the error.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
These flags tell mds if there is pending capsnap explicitly.
Without this explicit notification, mds can only conclude if
client has pending capsnap. The method mds use is inefficient
and error-prone.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
startsync is a no-op, has been for years. Remove it.
Link: http://tracker.ceph.com/issues/20604
Signed-off-by: Yanhu Cao <gmayyyha@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
drivers/block/rbd.c: In function 'rbd_acquire_lock':
drivers/block/rbd.c:3602:44: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Silence the warning, found it when built old kernel(3.10) with
OBS(opensuse build service).
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
OSD has a configurable limitation of max write size. OSD return
error if write request size is larger than the limitation. For now,
set max write size to CEPH_MSG_MAX_DATA_LEN. It should be small
enough.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ville Syrjälä spotted that PGETBL_CTL was losing its enable bit upon a
reset. That was causing the display to show garbage on his 945gm. On my
i915gm the effect was far more severe; re-enabling the display following
the reset without PGETBL_CTL being enabled lead to an immediate hard
hang.
We do have a routine to re-enable PGETBL_CTL which is applicable to
gen2-4, although on gen4 it is documented that a graphics reset doesn't
alter the register (no such wording is given for gen3) and should be safe
to call to punch back in the enable bit. However, that leaves the question
of whether we need to completely re-initialise the register and the
rest of the GSM. For g33/pnv/gen4+, where we do have a configurable
page table, its contents do seem to be kept, and so we should be able to
recover without having to reinitialise the GTT from scratch (as prior to
g33, that register is configured by the BIOS and we leave alone except
for the enable bit).
This appears to have been broken by commit 5fbd0418ee ("drm/i915:
Re-enable GGTT earlier during resume on pre-gen6 platforms"), which
moved the intel_enable_gtt() from i915_gem_init_hw() (also used by
reset) to add it earlier during hw init and resume, missing the reset
path.
v2: Find the culprit, rearrange ggtt_enable to be before gem_init_hw to
match init/resume
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 5fbd0418ee ("drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101852
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170906111405.27110-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 0db8c96120)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add the missing __user to the urelocs cast to fix the following sparse
warning:
i915_gem_execbuffer.c:1541:47: warning: cast removes address space of expression
i915_gem_execbuffer.c:1541:62: warning: incorrect type in argument 2 (different address spaces)
i915_gem_execbuffer.c:1541:62: expected void const [noderef] <asn:1>*from
i915_gem_execbuffer.c:1541:62: got char *
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165434.24636-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
(cherry picked from commit 908a610557)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit 6c6b6f28b3 ("loop: set physical block size to PAGE_SIZE")
caused mkfs.xfs to barf on ppc64 [1]. Always using PAGE_SIZE as the
physical block size still makes the most sense semantically, but let's
just lie and always set it to the same value as the logical block size
(same goes for io_min). In the future we might want to at least bump up
io_min to PAGE_SIZE but I'm sick of these stupid changes so let's play
it safe.
1: https://marc.info/?l=linux-xfs&m=150459024723753&w=2
Tested-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This field hasn't been used since commit 57b691819e ("NFS: Cache
access checks more aggressively").
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When a byte range lock (or flock) is taken out on an NFS file, the
validity of the cached data is checked and the inode is marked
NFS_INODE_INVALID_DATA. However the cached data isn't flushed from
the page cache.
This is sufficient for future read() requests or mmap() requests as
they call nfs_revalidate_mapping() which performs the flush if
necessary.
However an existing mapping is not affected. Accessing data through
that mapping will continue to return old data even though the inode is
marked NFS_INODE_INVALID_DATA.
This can easily be confirmed using the 'nfs' tool in
git://github.com/okirch/twopence-nfs.git
and running
nfs coherence FILENAME
on one client, and
nfs coherence -r FILENAME
on another client.
It appears that prior to Linux 2.6.0 this worked correctly.
However commit:
http://git.kernel.org/cgit/linux/kernel/git/history/history.git/commit/?id=ca9268fe3ddd075714005adecd4afbd7f9ab87d0
removed the call to inode_invalidate_pages() from nfs_zap_caches(). I
haven't tested this code, but inspection suggests that prior to this
commit, file locking would invalidate all inode pages.
This patch adds a call to nfs_revalidate_mapping() after a
successful SETLK so that invalid data is flushed. With this patch the
above test passes. To minimize impact (and possibly avoid a GETATTR
call) this only happens if the mapping might be mapped into
userspace.
Cc: Olaf Kirch <okir@suse.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
RPC_TASK_NO_RETRANS_TIMEOUT is set when cl_noretranstimeo
is set, which happens when RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT is set,
which happens when NFS_CS_NO_RETRANS_TIMEOUT is set.
This flag means "don't resend on a timeout, only resend if the
connection gets broken for some reason".
cl_discrtry is set when RPC_CLNT_CREATE_DISCRTRY is set, which
happens when NFS_CS_DISCRTRY is set.
This flag means "always disconnect before resending".
NFS_CS_NO_RETRANS_TIMEOUT and NFS_CS_DISCRTRY are both only set
in nfs4_init_client(), and it always sets both.
So we will never have a situation where only one of the flags is set.
So this code, which tests if timeout retransmits are allowed, and
disconnection is required, will never run.
So it makes sense to remove this code as it cannot be tested and
could confuse people reading the code (like me).
(alternately we could leave it there with a comment saying
it is never actually used).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Don't populate the arrays cdb on the stack, instead make them static.
Makes the object code smaller by 230 bytes:
Before:
text data bss dec hex filename
3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o
After:
text data bss dec hex filename
3407 400 0 3807 edf drivers/ata/libata-zpodd.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Intel AHCI controllers that also hide NVMe devices in their bar
can't use MSI interrupts, so disable them.
Reported-by: John Loy <john.robert.loy@gmail.com>
Tested-by: John Loy <john.robert.loy@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: d684a90d38 ("ahci: per-port msix support")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Tejun Heo <tj@kernel.org>
