Now that the powerpc code parses dynamic reconfiguration memory
LMB information from the LMB array and not the device tree
directly we can move the of_drconf_cell struct to drmem.h where
it fits better.
In addition, the struct is renamed to of_drconf_cell_v1 in
anticipation of upcoming support for version 2 of the dynamic
reconfiguration property and the members are typed as __be*
values to reflect how they exist in the device tree.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the pseries memory hotplug code to use the newly added
dynamic reconfiguration LMB array. Doing this is required for the
upcoming support of version 2 of the dynamic reconfiguration
device tree property.
In addition, making this change cleans up the code that parses the
LMB information as we no longer need to worry about device tree
format. This allows us to discard one of the first steps on memory
hotplug where we make a working copy of the device tree property and
convert the entire property to cpu format. Instead we just use the
LMB array directly while holding the memory hotplug lock.
This patch also moves the updating of the device tree property to
powerpc/mm/drmem.c. This allows to the hotplug code to work without
needing to know the device tree format and provides a single
routine for updating the device tree property. This new routine
will handle determination of the proper device tree format and
generate a properly formatted device tree property.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update code in powerpc/numa.c to use the walk_drmem_lmbs()
routine instead of parsing the device tree directly. This is
in anticipation of introducing a new ibm,dynamic-memory-v2
property with a different format. This will allow the numa code
to use a single initialization routine per-LMB irregardless of
the device tree format.
Additionally, to support additional routines in numa.c that need
to look up LMB information, an late_init routine is added to drmem.c
to allocate the array of LMB information. This LMB array will provide
per-LMB information to separate the LMB data from the device tree
format.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently have code to parse the dynamic reconfiguration LMB
information from the ibm,dynamic-meory device tree property in
multiple locations; numa.c, prom.c, and pseries/hotplug-memory.c.
In anticipation of adding support for a version 2 of the
ibm,dynamic-memory property this patch aims to separate the device
tree information from the device tree format.
Doing this requires a two step process to avoid a possibly very large
bootmem allocation early in boot. During initial boot, new routines
are provided to walk the device tree property and make a call-back
for each LMB.
The second step (introduced in later patches) will allocate an
array of LMB information that can be used directly without needing
to know the DT format.
This approach provides the benefit of consolidating the device tree
property parsing to a single location and (eventually) providing
a common data structure for retrieving LMB information.
This patch introduces a routine to walk the ibm,dynamic-memory
property in the flattened device tree and updates the prom.c code
to use this to initialize memory.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The PUD macros (PUD_TABLE_BIT, PUD_TYPE_MASK, PUD_TYPE_SECT) use the
pgdval_t even when pudval_t is available. Even though the underlying
type for both (u64) is the same it is confusing and may lead to issues
in the future.
Fix this by using pudval_t to define the PUD_* macros.
Fixes: 084bd29810 ("ARM64: mm: HugeTLB support.")
Fixes: 206a2a73a6 ("arm64: mm: Create gigabyte kernel logical mappings where possible")
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It isn't entirely obvious if we're using software PAN because we
don't say anything about it in the boot log. But if we're using
hardware PAN we'll print a nice CPU feature message indicating
it. Add a print for software PAN too so we know if it's being
used or not.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tvrtko noticed that the comments describing the interaction of RCU and
the deferred worker for freeing drm_i915_gem_object were a little
confusing, so attempt to bring some sense to them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115205759.13884-1-chris@chris-wilson.co.uk
Check that we can successfully wait upon a dma_fence using the
i915_sw_fence, including the optional timeout mechanism.
v2: Account for the rounding up of the timeout to the next second.
Unfortunately, the minimum delay is then 1 second.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115204348.8480-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Quoting Hans:
If we return 1 from our post_reset handler, then our disconnect handler
will be called immediately afterwards. Since pre_reset blocks all scsi
requests our disconnect handler will then hang in the scsi_remove_host
call.
This is esp. bad because our disconnect handler hanging for ever also
stops the USB subsys from enumerating any new USB devices, causes commands
like lsusb to hang, etc.
In practice this happens when unplugging some uas devices because the hub
code may see the device as needing a warm-reset and calls usb_reset_device
before seeing the disconnect. In this case uas_configure_endpoints fails
with -ENODEV. We do not want to print an error for this, so this commit
also silences the shost_printk for -ENODEV.
ENDQUOTE
However, if we do that we better drop any unconditional execution
and report to the SCSI subsystem that we have undergone a reset
but we are not operational now.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disconnected sometimes the cdc-acm driver logs errors like these:
[20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19
[20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19
[20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19
[20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19
[20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19
[20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19
[20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19
Silence these by not logging errors when the result is -ENODEV.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing from ssusb_wakeup_enable/disable to ssusb_wakeup_set was done
in only one of two places in the kernel, the other one now causes a
build failure:
drivers/usb/mtu3/mtu3_plat.c: In function 'mtu3_suspend':
drivers/usb/mtu3/mtu3_plat.c:462:2: error: implicit declaration of function 'ssusb_wakeup_set'; did you mean 'ssusb_wakeup_disable'? [-Werror=implicit-function-declaration]
This adapts the dummy helpers the same way that the extern declarations
were.
Fixes: f0ede2c628 ("usb: mtu3: supports remote wakeup for mt2712 with two SSUSB IPs")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tx_tasklet tasklet is used in invoke the hrtimer (task_timer) in
softirq context. This can be also achieved without the tasklet but
with HRTIMER_MODE_SOFT as hrtimer mode.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: keescook@chromium.org
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/20171221104205.7269-36-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The tasklet is used to defer the execution of snd_pcm_period_elapsed() to
the softirq context. Using the HRTIMER_MODE_SOFT mode invokes the timer
callback in softirq context as well which renders the tasklet useless.
[o-takashi: avoid stall due to a call of hrtimer_cancel() on a callback of hrtimer]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: alsa-devel@alsa-project.org
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-35-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All prerequisites to handle hrtimers for expiry in either hard or soft
interrupt context are in place.
Add the missing bit in hrtimer_init() which associates the timer to the
hard or the softirq clock base.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-30-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hrtimer callbacks are always invoked in hard interrupt context. Several
users in tree require soft interrupt context for their callbacks and
achieve this by combining a hrtimer with a tasklet. The hrtimer schedules
the tasklet in hard interrupt context and the tasklet callback gets invoked
in softirq context later.
That's suboptimal and aside of that the real-time patch moves most of the
hrtimers into softirq context. So adding native support for hrtimers
expiring in softirq context is a valuable extension for both mainline and
the RT patch set.
Each valid hrtimer clock id has two associated hrtimer clock bases: one for
timers expiring in hardirq context and one for timers expiring in softirq
context.
Implement the functionality to associate a hrtimer with the hard or softirq
related clock bases and update the relevant functions to take them into
account when the next expiry time needs to be evaluated.
Add a check into the hard interrupt context handler functions to check
whether the first expiring softirq based timer has expired. If it's expired
the softirq is raised and the accounting of softirq based timers to
evaluate the next expiry time for programming the timer hardware is skipped
until the softirq processing has finished. At the end of the softirq
processing the regular processing is resumed.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-29-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add braces to certain "multiline" conditions where "multiline" means
including comments.
Signed-off-by: Kenny Ballou <kballou@devnulllabs.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a number of checkpatch warnings in xgfib/vb_setmode.c about line
length being over 80 characters.
Signed-off-by: Kenny Ballou <kballou@devnulllabs.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the latest patches from Neil, we are now getting a build warning:
drivers/staging/lustre/lnet/selftest/module.c: In function ‘lnet_selftest_init’:
drivers/staging/lustre/lnet/selftest/module.c:98:10: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return rc;
^~
So fix this up by giving a default error value to rc.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The omap2 onenand driver is now available for compile-testing, which
uncovers a warning in configurations that have a 64-bit resource_size_t:
drivers/mtd/onenand/omap2.c: In function 'omap2_onenand_probe':
drivers/mtd/onenand/omap2.c:536:54: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
dev_err(dev, "Cannot reserve memory region at 0x%08x, size: 0x%x\n",
drivers/mtd/onenand/omap2.c:536:66: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=]
Changing the format string to the special %pR simplifies the code
and lets it do the right thing in that configuration, while avoiding
the warning.
Fixes: a758f50f10 ("mtd: onenand: omap2: Configure driver from DT")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
xlnx_vcu driver uses devm_ioremap_nocache, which is included
only when HAS_IOMEM is enabled.
drivers/soc/xilinx/xlnx_vcu.o: In function `xvcu_probe':
xlnx_vcu.c:(.text+0x116): undefined reference to `devm_ioremap_nocache'
xlnx_vcu.c:(.text+0x1ae): undefined reference to `devm_ioremap_nocache'
Signed-off-by: Dhaval Shah <dshah@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Look up the associativity arrays in of_drconf_to_nid_single when
deriving the nid for a LMB instead of having it passed in as a
parameter.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the usable memory property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_usable_memory() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Look up the device node for the associativity array property instead
of having it passed in as a parameter. This changes precedes an update
in which the calling routines for of_get_assoc_arrays() will not have
the device node pointer to pass in.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add CQHCI initialization and implement CQHCI operations for Arasan
SDHCI variant host, namely arasan,sdhci-5.1, which is used by Rockchip
RK3399 platform.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We're filling the "remainder" word with little-endian data, then writing
it out to IO registers with endian-correcting writel(). That probably
won't work on big-endian systems.
Let's mark the "remainder" variable as LE32 (since we fill it with
memcpy()) and do the swapping explicitly.
Some of this function could be done more easily without memcpy(), but
the unaligned "remainder" case is a little hard to do without
potentially overrunning 'tx_buf', so I just applied the same solution in
all cases (memcpy() + le32_to_cpu()).
Tested only on a little-endian system.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org
This takes care of 2 TODOs in this driver, by using the common DSI
packet-marshalling code instead of our custom short/long write code.
This both saves us some duplicated code and gets us free support for
command types that weren't already part of our switch block (e.g.,
MIPI_DSI_GENERIC_LONG_WRITE).
The code logic stays mostly intact, except that it becomes unnecessary
to split the short/long write functions, and we have to copy data a bit
more.
Along the way, I noticed that loop bounds were a little odd:
while (DIV_ROUND_UP(len, pld_data_bytes))
This really was just supposed to be 'len != 0', so I made that more
clear.
Tested on RK3399 with some pending refactoring patches by Nickey Yang,
to make the Rockchip DSI driver wrap this common driver.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-1-briannorris@chromium.org
sparse complains:
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol
'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static?
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203319.139520-1-briannorris@chromium.org
Replaces hard-coded node ID shift for the descriptor base MMR to fix
initialization on UV4A while maintaining support for previous architectures.
Signed-off-by: Andrew Banman <abanman@hpe.com>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515440592-44060-1-git-send-email-abanman@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Along with the fixes in UV4A (rev2) MMRs, the code to access those
MMRs also was modified by the fixes. UV3, UV4, and UV4A no longer
have compatible setups for Global Address Memory (GAM).
Correct the new mistakes.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Acked-by: Andrew Banman <abanman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515440405-20880-6-git-send-email-mike.travis@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Intel processor changes necessitated UV4 HUB Global Address Memory
(GAM) fixes to accommodate support for those processors. This patch
deals with the updated address range change from 46 to 52 bits in UV4A.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Acked-by: Andrew Banman <abanman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515440405-20880-5-git-send-email-mike.travis@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Upcoming Intel CascadeLake and IceLake processors have some architecture
changes that required fixes in the UV4 HUB bringing that chip to
revision 2. The nomenclature for that new chip is "UV4A".
This patch fixes the references for the expanded MMR definitions in the
previous (automated) patch.
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Acked-by: Andrew Banman <abanman@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@hpe.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515440405-20880-3-git-send-email-mike.travis@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Before commit:
e33a9bba85 ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler")
delayacct_blkio_end() was called after context-switching into the task which
completed I/O.
This resulted in double counting: the task would account a delay both waiting
for I/O and for time spent in the runqueue.
With e33a9bba85, delayacct_blkio_end() is called by try_to_wake_up().
In ttwu, we have not yet context-switched. This is more correct, in that
the delay accounting ends when the I/O is complete.
But delayacct_blkio_end() relies on 'get_current()', and we have not yet
context-switched into the task whose I/O completed. This results in the
wrong task having its delay accounting statistics updated.
Instead of doing that, pass the task_struct being woken to delayacct_blkio_end(),
so that it can update the statistics of the correct task.
Signed-off-by: Josh Snyder <joshs@netflix.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Brendan Gregg <bgregg@netflix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-block@vger.kernel.org
Fixes: e33a9bba85 ("sched/core: move IO scheduling accounting from io_schedule_timeout() into scheduler")
Link: http://lkml.kernel.org/r/1513613712-571-1-git-send-email-joshs@netflix.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The softirq based hrtimer can utilize most of the existing hrtimers
functions, but need to operate on a different data set.
Add an 'active_mask' parameter to various functions so the hard and soft bases
can be selected. Fixup the existing callers and hand in the ACTIVE_HARD
mask.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-28-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently hrtimer callback functions are always executed in hard interrupt
context. Users of hrtimers, which need their timer function to be executed
in soft interrupt context, make use of tasklets to get the proper context.
Add additional hrtimer clock bases for timers which must expire in softirq
context, so the detour via the tasklet can be avoided. This is also
required for RT, where the majority of hrtimer is moved into softirq
hrtimer context.
The selection of the expiry mode happens via a mode bit. Introduce
HRTIMER_MODE_SOFT and the matching combinations with the ABS/REL/PINNED
bits and update the decoding of hrtimer_mode in tracepoints.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-27-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__run_hrtimer() is called with the hrtimer_cpu_base.lock held and
interrupts disabled. Before invoking the timer callback the base lock is
dropped, but interrupts stay disabled.
The upcoming support for softirq based hrtimers requires that interrupts
are enabled before the timer callback is invoked.
To avoid code duplication, take hrtimer_cpu_base.lock with
raw_spin_lock_irqsave(flags) at the call site and hand in the flags as
a parameter. So raw_spin_unlock_irqrestore() before the callback invocation
will either keep interrupts disabled in interrupt context or restore to
interrupt enabled state when called from softirq context.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-26-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Among the existing architecture specific versions of
copy_siginfo_to_user32 there are several different implementation
problems. Some architectures fail to handle all of the cases in in
the siginfo union. Some architectures perform a blind copy of the
siginfo union when the si_code is negative. A blind copy suggests the
data is expected to be in 32bit siginfo format, which means that
receiving such a signal via signalfd won't work, or that the data is
in 64bit siginfo and the code is copying nonsense to userspace.
Create a single instance of copy_siginfo_to_user32 that all of the
architectures can share, and teach it to handle all of the cases in
the siginfo union correctly, with the assumption that siginfo is
stored internally to the kernel is 64bit siginfo format.
A special case is made for x86 x32 format. This is needed as presence
of both x32 and ia32 on x86_64 results in two different 32bit signal
formats. By allowing this small special case there winds up being
exactly one code base that needs to be maintained between all of the
architectures. Vastly increasing the testing base and the chances of
finding bugs.
As the x86 copy of copy_siginfo_to_user32 the call of the x86
signal_compat_build_tests were moved into sigaction_compat_abi, so
that they will keep running.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Preparatory patch for softirq based hrtimers to avoid code duplication,
factor out the __hrtimer_start_range_ns() function from hrtimer_start_range_ns().
No functional change.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-24-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hrtimer_reprogram() must have access to the hrtimer_clock_base of the new
first expiring timer to access hrtimer_clock_base.offset for adjusting the
expiry time to CLOCK_MONOTONIC. This is required to evaluate whether the
new left most timer in the hrtimer_clock_base is the first expiring timer
of all clock bases in a hrtimer_cpu_base.
The only user of hrtimer_reprogram() is hrtimer_start_range_ns(), which has
a pointer to hrtimer_clock_base() already and hands it in as a parameter. But
hrtimer_start_range_ns() will be split for the upcoming support for softirq
based hrtimers to avoid code duplication and will lose the direct access to
the clock base pointer.
Instead of handing in timer and timer->base as a parameter remove the base
parameter from hrtimer_reprogram() instead and retrieve the clock base internally.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-23-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current decision whether a timer can be queued on a remote CPU checks
for timer->expiry <= remote_cpu_base.expires_next.
This is too restrictive because a timer with the same expiry time as an
existing timer will be enqueued on right-hand size of the existing timer
inside the rbtree, i.e. behind the first expiring timer.
So its safe to allow enqueuing timers with the same expiry time as the
first expiring timer on a remote CPU base.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-22-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
hrtimer_reprogram() is conditionally invoked from hrtimer_start_range_ns()
when hrtimer_cpu_base.hres_active is true.
In the !hres_active case there is a special condition for the nohz_active
case:
If the newly enqueued timer expires before the first expiring timer on a
remote CPU then the remote CPU needs to be notified and woken up from a
NOHZ idle sleep to take the new first expiring timer into account.
Previous changes have already established the prerequisites to make the
remote enqueue behaviour the same whether high resolution mode is active or
not:
If the to be enqueued timer expires before the first expiring timer on a
remote CPU, then it cannot be enqueued there.
This was done for the high resolution mode because there is no way to
access the remote CPU timer hardware. The same is true for NOHZ, but was
handled differently by unconditionally enqueuing the timer and waking up
the remote CPU so it can reprogram its timer. Again there is no compelling
reason for this difference.
hrtimer_check_target(), which makes the 'can remote enqueue' decision is
already unconditional, but not yet functional because nothing updates
hrtimer_cpu_base.expires_next in the !hres_active case.
To unify this the following changes are required:
1) Make the store of the new first expiry time unconditonal in
hrtimer_reprogram() and check __hrtimer_hres_active() before proceeding
to the actual hardware access. This check also lets the compiler
eliminate the rest of the function in case of CONFIG_HIGH_RES_TIMERS=n.
2) Invoke hrtimer_reprogram() unconditionally from
hrtimer_start_range_ns()
3) Remove the remote wakeup special case for the !high_res && nohz_active
case.
Confine the timers_nohz_active static key to timer.c which is the only user
now.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-21-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the first hrtimer on the current CPU is removed,
hrtimer_force_reprogram() is invoked but only when
CONFIG_HIGH_RES_TIMERS=y and hrtimer_cpu_base.hres_active is set.
hrtimer_force_reprogram() updates hrtimer_cpu_base.expires_next and
reprograms the clock event device. When CONFIG_HIGH_RES_TIMERS=y and
hrtimer_cpu_base.hres_active is set, a pointless hrtimer interrupt can be
prevented.
hrtimer_check_target() makes the 'can remote enqueue' decision. As soon as
hrtimer_check_target() is unconditionally available and
hrtimer_cpu_base.expires_next is updated by hrtimer_reprogram(),
hrtimer_force_reprogram() needs to be available unconditionally as well to
prevent the following scenario with CONFIG_HIGH_RES_TIMERS=n:
- the first hrtimer on this CPU is removed and hrtimer_force_reprogram() is
not executed
- CPU goes idle (next timer is calculated and hrtimers are taken into
account)
- a hrtimer is enqueued remote on the idle CPU: hrtimer_check_target()
compares expiry value and hrtimer_cpu_base.expires_next. The expiry value
is after expires_next, so the hrtimer is enqueued. This timer will fire
late, if it expires before the effective first hrtimer on this CPU and
the comparison was with an outdated expires_next value.
To prevent this scenario, make hrtimer_force_reprogram() unconditional
except the effective reprogramming part, which gets eliminated by the
compiler in the CONFIG_HIGH_RES_TIMERS=n case.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keescook@chromium.org
Link: http://lkml.kernel.org/r/20171221104205.7269-20-anna-maria@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
