Commit graph

737480 commits

Author SHA1 Message Date
Majd Dibbiny
727b7e9a65 IB/core: Make sure that PSN does not overflow
The rq/sq->psn is 24 bits as defined in the IB spec, therefore we mask
out the 8 most significant bits to avoid overflow in modify_qp.

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27 15:40:35 -07:00
Nitzan Carmi
45e6ae7ef2 IB/mlx5: Fix mlx5_ib_alloc_mr error flow
ibmr.device is being set only after ib_alloc_mr() is
(successfully) complete. Therefore, in case mlx5_core_create_mkey()
return with error, the error flow calls mlx5_free_priv_descs()
which uses ibmr.device (which doesn't exist yet), causing
a NULL dereference oops.

To fix this, the IB device should be set in the mr struct earlier
stage (e.g. prior to calling mlx5_core_create_mkey()).

Fixes: 8a187ee52b ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27 15:24:41 -07:00
Moni Shoua
4a50881bba IB/core: Verify that QP is security enabled in create and destroy
The XRC target QP create flow sets up qp_sec only if there is an IB link with
LSM security enabled. However, several other related uAPI entry points blindly
follow the qp_sec NULL pointer, resulting in a possible oops.

Check for NULL before using qp_sec.

Cc: <stable@vger.kernel.org> # v4.12
Fixes: d291f1a652 ("IB/core: Enforce PKey security on QPs")
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27 15:24:41 -07:00
Moni Shoua
05d14e7b0c IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()
If the input command length is larger than the kernel supports an error should
be returned in case the unsupported bytes are not cleared, instead of the
other way aroudn. This matches what all other callers of ib_is_udata_cleared
do and will avoid user ABI problems in the future.

Cc: <stable@vger.kernel.org> # v4.10
Fixes: 189aba99e7 ("IB/uverbs: Extend modify_qp and support packet pacing")
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27 15:24:41 -07:00
Majd Dibbiny
ad9a3668a4 IB/mlx5: Serialize access to the VMA list
User-space applications can do mmap and munmap directly at
any time.

Since the VMA list is not protected with a mutex, concurrent
accesses to the VMA list from the mmap and munmap can cause
data corruption. Add a mutex around the list.

Cc: <stable@vger.kernel.org> # v4.7
Fixes: 7c2344c3bb ("IB/mlx5: Implements disassociate_ucontext API")
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-27 15:24:40 -07:00
Yafang Shao
4f36b935ec net/trace: fix printk format in inet_sock_set_state
There's a space character missed in the printk messages.

Put the message into one line could simplify searching for
the messages in the kernel source.

Fixes: 563e0bb0dc74("net: tracepoint: replace tcp_set_state tracepoint with inet_sock_set_state tracepoint")
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 17:03:44 -05:00
David S. Miller
55b07a65e1 Merge branch 'net-zerocopy-refine'
Willem de Bruijn says:

====================
zerocopy refinements

1/4 is a small optimization follow-up to the earlier fix to skb_segment:
    check skb state once per skb, instead of once per frag.
2/4 makes behavior more consistent between standard and zerocopy send:
    set the PSH bit when hitting MAX_SKB_FRAGS. This helps GRO.
3/4 resolves a surprising inconsistency in notification:
    because small packets were not stored in frags, they would not set
    the copied error code over loopback. This change also optimizes
    the path by removing copying and making tso_fragment cheaper.
4/4 follows-up to 3/4 by no longer allocated now unused memory.
    this was actually already in RFC patches, but dropped as I pared
    down the patch set during revisions.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 16:44:14 -05:00
Willem de Bruijn
8ddab50839 tcp: do not allocate linear memory for zerocopy skbs
Zerocopy payload is now always stored in frags, and space for headers
is reversed, so this memory is unused.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 16:44:14 -05:00
Willem de Bruijn
02583adeff tcp: place all zerocopy payload in frags
This avoids an unnecessary copy of 1-2KB and improves tso_fragment,
which has to fall back to tcp_fragment if skb->len != skb_data_len.

It also avoids a surprising inconsistency in notifications:
Zerocopy packets sent over loopback have their frags copied, so set
SO_EE_CODE_ZEROCOPY_COPIED in the notification. But this currently
does not happen for small packets, because when all data fits in the
linear fragment, data is not copied in skb_orphan_frags_rx.

Reported-by: Tom Deseyn <tom.deseyn@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 16:44:13 -05:00
Willem de Bruijn
111856c758 tcp: push full zerocopy packets
Skbs that reach MAX_SKB_FRAGS cannot be extended further. Do the
same for zerocopy frags as non-zerocopy frags and set the PSH bit.
This improves GRO assembly.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 16:44:13 -05:00
Willem de Bruijn
bf5c25d608 skbuff: in skb_segment, call zerocopy functions once per nskb
This is a net-next follow-up to commit 268b790679 ("skbuff: orphan
frags before zerocopy clone"), which fixed a bug in net, but added a
call to skb_zerocopy_clone at each frag to do so.

When segmenting skbs with user frags, either the user frags must be
replaced with private copies and uarg released, or the uarg must have
its refcount increased for each new skb.

skb_orphan_frags does the first, except for cases that can handle
reference counting. skb_zerocopy_clone then does the second.

Call these once per nskb, instead of once per frag.

That is, in the common case. With a frag list, also refresh when the
origin skb (frag_skb) changes.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 16:44:13 -05:00
Linus Torvalds
5f520fc318 While doing tests on tracing over the network, I found that the packets
were getting corrupted. In the process I found three bugs. One was the
 culprit, but the other two scared me. After deeper investigation, they
 were not as major as I thought they were, due to a signed compared to
 an unsigned that prevented a negative number from doing actual harm.
 
 The two bigger bugs:
 
  - Mask the ring buffer data page length. There are data flags at the
    high bits of the length field. These were not cleared via the
    length function, and the length could return a negative number.
    (Although the number returned was unsigned, but was assigned to a
    signed number) Luckily, this value was compared to PAGE_SIZE which is
    unsigned and kept it from entering the path that could have caused damage.
 
  - Check the page usage before reusing the ring buffer reader page.
    TCP increments the page ref when passing the page off to the network.
    The page is passed back to the ring buffer for use on free. But
    the page could still be in use by the TCP stack.
 
 Minor bugs:
 
  - Related to the first bug. No need to clear out the unused ring buffer
    data before sending to user space. It is now done by the ring buffer
    code itself.
 
  - Reset pointers after free on error path. There were some cases in
    the error path that pointers were freed but not set to NULL, and could
    have them freed again, having a pointer freed twice.
 -----BEGIN PGP SIGNATURE-----
 
 iQHIBAABCgAyFiEEPm6V/WuN2kyArTUe1a05Y9njSUkFAlpD9O8UHHJvc3RlZHRA
 Z29vZG1pcy5vcmcACgkQ1a05Y9njSUnC0Av9EqzJjJXlZuleCSiuh1umx33esgZv
 gOYTOXH9QLdKFHLpwVzeCsrhrLXNhbUfrGMQ0ERcpvVacHCKVwRyzx0nfI5W3rbt
 9sCsNsVR2SCVpzSWOvP9iJM0J/myFdZtYmGLC2BBJerXZFwl9Ciw+1bF7MFprb4v
 6r+49YrYMAR/H/obT3Aoh/XCOz0W0czk9ECGPhuwqAjWoNPwSgpbTdqpR92bJf85
 hGYppIX9d+4Gv4pZ2lfXDKrgiAPvHpp5I/znLDY8cG7GhcBjyXaetBb+XlfHI6D4
 jTS59f13CqcEhyFE5x2qwQBr9TTh043EKviixDud+nI1L7aNhDIBtb6tYrAmGWWh
 Rj1268gFjspi3pYTjI8cHXXCJSdQiAqFesiFLviU1c17PgjbBAnmkcsFSgOPxHqc
 j225jravcXtUqQq5J0qKR6Sn3LObfYJQk6tqpN6gWN76P75QgUms5W4+/NiEI0a3
 0LVjapxHZkDEYNRGmI+d0CvIJ3BWyb781Siw
 =xhPf
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "While doing tests on tracing over the network, I found that the
  packets were getting corrupted.

  In the process I found three bugs.

  One was the culprit, but the other two scared me. After deeper
  investigation, they were not as major as I thought they were, due to a
  signed compared to an unsigned that prevented a negative number from
  doing actual harm.

  The two bigger bugs:

   - Mask the ring buffer data page length. There are data flags at the
     high bits of the length field. These were not cleared via the
     length function, and the length could return a negative number.
     (Although the number returned was unsigned, but was assigned to a
     signed number) Luckily, this value was compared to PAGE_SIZE which
     is unsigned and kept it from entering the path that could have
     caused damage.

   - Check the page usage before reusing the ring buffer reader page.
     TCP increments the page ref when passing the page off to the
     network. The page is passed back to the ring buffer for use on
     free. But the page could still be in use by the TCP stack.

  Minor bugs:

   - Related to the first bug. No need to clear out the unused ring
     buffer data before sending to user space. It is now done by the
     ring buffer code itself.

   - Reset pointers after free on error path. There were some cases in
     the error path that pointers were freed but not set to NULL, and
     could have them freed again, having a pointer freed twice"

* tag 'trace-v4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix possible double free on failure of allocating trace buffer
  tracing: Fix crash when it fails to alloc ring buffer
  ring-buffer: Do no reuse reader page if still in use
  tracing: Remove extra zeroing out of the ring buffer page
  ring-buffer: Mask out the info bits when returning buffer page length
2017-12-27 13:06:57 -08:00
Linus Torvalds
9b9577948f sound fixes for 4.15-rc6
It seems that Santa overslept with a bunch of gifts; the majority of
 changes here are various device-specific ASoC fixes, most notably the
 revert of rcar IOMMU support and fsl_ssi AC97 fixes, but also lots of
 small fixes for codecs.  Besides that, the usual HD-audio quirks and
 fixes are included, too.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlpDXYgOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE+72Q/8DlfeMksYIprOMn4kNLvn99fKCDwsYCdhlHX/
 +EYVRwR8a320zKhSND5jkqBj4A0Dy98nMybB9ePOM9bE2PltdTVM3BDHUqvSP/18
 GWjT3qaAK2GPCEpgwYdVEN4eDC778JFpIv5LouyO5Tib27Ar6MZhZU4Rzs5vtC3U
 lwQKOQkuND0zF++5lqKqO2fktXQmg0BtqK0xHvniB3rJTry4pjJJdVWmEUvatwaY
 4HLMmC+EE1kwdVMCrKr2RzdEt+d79Ab89EhBxcNe4wRIap2XkTq8xHq9W3nPRRlQ
 aqeXu1ou9pP0S1ZXIWZZX3GxX94eZmtTiXYvhBG1+qCul0YhfiQug4HS7HaAnmQ+
 +A/Q7UJQHXcNqKSdutaixmYhOYXTLQLIBqlMKmBlE3UU2HkiZHyMEnREElFh7qhh
 ZeYwJrYsTB6q+SaNnbBbVlRreq4+CatKYTvlyBLCjbUTdLc428P1rfacxHpJJNUY
 IQ4TyWu0PHld7+lvNLc1xvWymSkkrhxAHQbAAkGGpxNHzCK/pKLARkByn2DJ9EY8
 Lo3mANkglVLITW5fsk6vZ063fHtO73Mn2I4/i74hVjYhXglbTzkUJpPzjVM/ydk4
 gQ+cvZ9fImrHXgiUoc2tX1jYFugkfQd3j/WaZAg3sdWzJQsegD4unT6yspcZ5Qfx
 FQPBqHg=
 =JNH5
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "It seems that Santa overslept with a bunch of gifts; the majority of
  changes here are various device-specific ASoC fixes, most notably the
  revert of rcar IOMMU support and fsl_ssi AC97 fixes, but also lots of
  small fixes for codecs. Besides that, the usual HD-audio quirks and
  fixes are included, too"

* tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
  ALSA: hda - Fix missing COEF init for ALC225/295/299
  ALSA: hda: Drop useless WARN_ON()
  ALSA: hda - change the location for one mic on a Lenovo machine
  ALSA: hda - fix headset mic detection issue on a Dell machine
  ALSA: hda - Add MIC_NO_PRESENCE fixup for 2 HP machines
  ASoC: rsnd: fixup ADG register mask
  ASoC: rt5514-spi: only enable wakeup when fully initialized
  ASoC: nau8825: fix issue that pop noise when start capture
  ASoC: rt5663: Fix the wrong result of the first jack detection
  ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update
  ASoC: Intel: Change kern log level to avoid unwanted messages
  ASoC: atmel-classd: select correct Kconfig symbol
  ASoC: wm_adsp: Fix validation of firmware and coeff lengths
  ASoC: Intel: Skylake: Do not check dev_type for dmic link type
  ASoC: rockchip: disable clock on error
  ASoC: tlv320aic31xx: Fix GPIO1 register definition
  ASoC: codecs: msm8916-wcd: Fix supported formats
  ASoC: fsl_asrc: Fix typo in a field define
  ASoC: rsnd: ssiu: clear SSI_MODE for non TDM Extended modes
  ASoC: da7218: Correct IRQ level in DT binding example
  ...
2017-12-27 12:59:27 -08:00
Rafael Gago
0074a8f3b3 mtd: spi-nor: Add support for s25fl128l and s25fl256l
They are exactly the same as the s25fl064l but bigger.

Signed-off-by: Rafael Gago Castano <rgc@hms.se>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2017-12-27 21:31:26 +01:00
Linus Torvalds
ac461122c8 x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
Commit e802a51ede ("x86/idt: Consolidate IDT invalidation") cleaned up
and unified the IDT invalidation that existed in a couple of places.  It
changed no actual real code.

Despite not changing any actual real code, it _did_ change code generation:
by implementing the common idt_invalidate() function in
archx86/kernel/idt.c, it made the use of the function in
arch/x86/kernel/machine_kexec_32.c be a real function call rather than an
(accidental) inlining of the function.

That, in turn, exposed two issues:

 - in load_segments(), we had incorrectly reset all the segment
   registers, which then made the stack canary load (which gcc does
   using offset of %gs) cause a trap.  Instead of %gs pointing to the
   stack canary, it will be the normal zero-based kernel segment, and
   the stack canary load will take a page fault at address 0x14.

 - to make this even harder to debug, we had invalidated the GDT just
   before calling idt_invalidate(), which meant that the fault happened
   with an invalid GDT, which in turn causes a triple fault and
   immediate reboot.

Fix this by

 (a) not reloading the special segments in load_segments(). We currently
     don't do any percpu accesses (which would require %fs on x86-32) in
     this area, but there's no reason to think that we might not want to
     do them, and like %gs, it's pointless to break it.

 (b) doing idt_invalidate() before invalidating the GDT, to keep things
     at least _slightly_ more debuggable for a bit longer. Without a
     IDT, traps will not work. Without a GDT, traps also will not work,
     but neither will any segment loads etc. So in a very real sense,
     the GDT is even more core than the IDT.

Fixes: e802a51ede ("x86/idt: Consolidate IDT invalidation")
Reported-and-tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.LFD.2.21.1712271143180.8572@i7.lan
2017-12-27 20:59:41 +01:00
Matthieu CASTET
2b83ff96f5 led: core: Fix brightness setting when setting delay_off=0
With the current code, the following sequence won't work :
echo timer > trigger

echo 0 >  delay_off
* at this point we call
** led_delay_off_store
** led_blink_set
*** stop timer
** led_blink_setup
** led_set_software_blink
*** if !delay_on, led off
*** if !delay_off, set led_set_brightness_nosleep <--- LED_BLINK_SW is set but timer is stop
*** otherwise start timer/set LED_BLINK_SW flag

echo xxx > brightness
* led_set_brightness
** if LED_BLINK_SW
*** if brightness=0, led off
*** else apply brightness if next timer <--- timer is stop, and will never apply new setting
** otherwise set led_set_brightness_nosleep

To fix that, when we delete the timer, we should clear LED_BLINK_SW.

Cc: linux-leds@vger.kernel.org
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-12-27 20:45:07 +01:00
rodrigosiqueira
7ac139eaa6 x86: Remove unused parameter of prepare_switch_to
Commit e37e43a497 ("x86/mm/64: Enable vmapped stacks
(CONFIG_HAVE_ARCH_VMAP_STACK=y)") added prepare_switch_to with one extra
parameter which is not used by the function, remove it.

Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20171215131533.hp6kqebw45o7uvsb@smtp.gmail.com
2017-12-27 20:37:41 +01:00
Thomas Gleixner
7ad1437d6a perf/x86/intel: Plug memory leak in intel_pmu_init()
A recent commit introduced an extra merge_attr() call in the skylake
branch, which causes a memory leak.

Store the pointer to the extra allocated memory and free it at the end of
the function.

Fixes: a5df70c354 ("perf/x86: Only show format attributes when supported")
Reported-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@linux.intel.com>
2017-12-27 20:23:59 +01:00
Steven Rostedt (VMware)
4397f04575 tracing: Fix possible double free on failure of allocating trace buffer
Jing Xia and Chunyan Zhang reported that on failing to allocate part of the
tracing buffer, memory is freed, but the pointers that point to them are not
initialized back to NULL, and later paths may try to free the freed memory
again. Jing and Chunyan fixed one of the locations that does this, but
missed a spot.

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com

Cc: stable@vger.kernel.org
Fixes: 737223fbca ("tracing: Consolidate buffer allocation code")
Reported-by: Jing Xia <jing.xia@spreadtrum.com>
Reported-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-27 14:21:27 -05:00
Jing Xia
24f2aaf952 tracing: Fix crash when it fails to alloc ring buffer
Double free of the ring buffer happens when it fails to alloc new
ring buffer instance for max_buffer if TRACER_MAX_TRACE is configured.
The root cause is that the pointer is not set to NULL after the buffer
is freed in allocate_trace_buffers(), and the freeing of the ring
buffer is invoked again later if the pointer is not equal to Null,
as:

instance_mkdir()
    |-allocate_trace_buffers()
        |-allocate_trace_buffer(tr, &tr->trace_buffer...)
	|-allocate_trace_buffer(tr, &tr->max_buffer...)

          // allocate fail(-ENOMEM),first free
          // and the buffer pointer is not set to null
        |-ring_buffer_free(tr->trace_buffer.buffer)

       // out_free_tr
    |-free_trace_buffers()
        |-free_trace_buffer(&tr->trace_buffer);

	      //if trace_buffer is not null, free again
	    |-ring_buffer_free(buf->buffer)
                |-rb_free_cpu_buffer(buffer->buffers[cpu])
                    // ring_buffer_per_cpu is null, and
                    // crash in ring_buffer_per_cpu->pages

Link: http://lkml.kernel.org/r/20171226071253.8968-1-chunyan.zhang@spreadtrum.com

Cc: stable@vger.kernel.org
Fixes: 737223fbca ("tracing: Consolidate buffer allocation code")
Signed-off-by: Jing Xia <jing.xia@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-27 14:21:16 -05:00
Steven Rostedt (VMware)
ae415fa4c5 ring-buffer: Do no reuse reader page if still in use
To free the reader page that is allocated with ring_buffer_alloc_read_page(),
ring_buffer_free_read_page() must be called. For faster performance, this
page can be reused by the ring buffer to avoid having to free and allocate
new pages.

The issue arises when the page is used with a splice pipe into the
networking code. The networking code may up the page counter for the page,
and keep it active while sending it is queued to go to the network. The
incrementing of the page ref does not prevent it from being reused in the
ring buffer, and this can cause the page that is being sent out to the
network to be modified before it is sent by reading new data.

Add a check to the page ref counter, and only reuse the page if it is not
being used anywhere else.

Cc: stable@vger.kernel.org
Fixes: 73a757e631 ("ring-buffer: Return reader page back into existing ring buffer")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-27 14:21:09 -05:00
Steven Rostedt (VMware)
6b7e633fe9 tracing: Remove extra zeroing out of the ring buffer page
The ring_buffer_read_page() takes care of zeroing out any extra data in the
page that it returns. There's no need to zero it out again from the
consumer. It was removed from one consumer of this function, but
read_buffers_splice_read() did not remove it, and worse, it contained a
nasty bug because of it.

Cc: stable@vger.kernel.org
Fixes: 2711ca237a ("ring-buffer: Move zeroing out excess in page to ring buffer code")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-27 14:20:59 -05:00
Dave Airlie
350877626f - Allow internal page allocation to fail (Chris)
- More improvements on logs, dumps, and trace (Chris, Michal)
 - Coffee Lake important fix for stolen memory (Lucas)
 - Continue to make GPU reset more robust as well
    improving selftest coverage for it (Chris)
 - Unifying debugfs return codes (Michal)
 - Using existing helper for testing obj pages (Matthew)
 - Organize and improve gem_request tracepoints (Lionel)
 - Protect DDI port to DPLL map from theoretical race (Rodrigo)
 - ... and consequently fixing the indentation on this DDI clk selection function (Chris)
 - ... and consequently properly serializing non-blocking modesets (Ville)
 - Add support for horizontal plane flipping on Cannonlake (Joonas)
 - Two Cannonlake Workarounds for better stability (Rafael)
 - Fix mess around PSR registers (DK)
 - More Coffee Lake PCI IDs (Rodrigo)
 - Remove CSS modifiers on pipe C of Geminilake (Krisman)
 - Disable all planes for load detection (Ville)
 - Reorg on i915 display headers (Michal)
 - Avoid enabling movntdqa optimization on hypervisor guest (Changbin)
 
 GVT:
 - more mmio switch optimization (Weinan)
 - cleanup i915_reg_t vs. offset usage (Zhenyu)
 - move write protect handler out of mmio handler (Zhenyu)
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaPXCRAAoJEPpiX2QO6xPKxi4IAJmAQCVBEZVz2TI/t6xJIYcl
 xGXlghAVlF8i2bRPpi8PioqUbASF1o7sIVjwIWEV+DgrIQT4MQCv1BmqvExlftBw
 5mgkKyS+7Itnp7vaioYRmF/YxMoqP1vHF4J6fBScmtHf+RKtlwXQzw+AnlJtg88h
 d9mudeDzV5UXB2Prntia3w3sb6oJVKbtgeo+njll2SL6EPaz0sKBEuhcJkKWygtH
 4gfneJG0cwIA/rJe4+eIfpnHRiXhhiwofPBYV0eWhBTTo47sKyGxfjpxmEEax1DF
 3JUUe9a+2dYqXxOyhLlZEOeCfkcXhkgDmvJTlupWGVV3POIncNlt60lhmuS4t5g=
 =wJGr
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Allow internal page allocation to fail (Chris)
- More improvements on logs, dumps, and trace (Chris, Michal)
- Coffee Lake important fix for stolen memory (Lucas)
- Continue to make GPU reset more robust as well
   improving selftest coverage for it (Chris)
- Unifying debugfs return codes (Michal)
- Using existing helper for testing obj pages (Matthew)
- Organize and improve gem_request tracepoints (Lionel)
- Protect DDI port to DPLL map from theoretical race (Rodrigo)
- ... and consequently fixing the indentation on this DDI clk selection function (Chris)
- ... and consequently properly serializing non-blocking modesets (Ville)
- Add support for horizontal plane flipping on Cannonlake (Joonas)
- Two Cannonlake Workarounds for better stability (Rafael)
- Fix mess around PSR registers (DK)
- More Coffee Lake PCI IDs (Rodrigo)
- Remove CSS modifiers on pipe C of Geminilake (Krisman)
- Disable all planes for load detection (Ville)
- Reorg on i915 display headers (Michal)
- Avoid enabling movntdqa optimization on hypervisor guest (Changbin)

GVT:
- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)

* tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel: (55 commits)
  drm/i915: Update DRIVER_DATE to 20171222
  drm/i915: Show HWSP in intel_engine_dump()
  drm/i915: Assert that the request is on the execution queue before being removed
  drm/i915/execlists: Show preemption progress in GEM_TRACE
  drm/i915: Put all non-blocking modesets onto an ordered wq
  drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+
  drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a
  drm/i915: No need to power up PG2 for GMBUS on BXT
  drm/i915: Disable DC states around GMBUS on GLK
  drm/i915: Do not enable movntdqa optimization in hypervisor guest
  drm/i915: Dump device info at once
  drm/i915: Add pretty printer for runtime part of intel_device_info
  drm/i915: Update intel_device_info_runtime_init() parameter
  drm/i915: Move intel_device_info definitions to its own header
  drm/i915: Move opregion definitions to dedicated intel_opregion.h
  drm/i915: Move display related definitions to dedicated header
  drm/i915: Move some utility functions to i915_util.h
  drm/i915/gvt: move write protect handler out of mmio emulation function
  drm/i915/gvt: cleanup usage for typed mmio reg vs. offset
  drm/i915/gvt: Fix pipe A enable as default for vgpu
  ...
2017-12-28 05:20:31 +10:00
Dave Airlie
03bfd4e19b Merge tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
GLK pipe C related fix, and a gvt fix.

* tag 'drm-intel-fixes-2017-12-22-1' of git://anongit.freedesktop.org/drm/drm-intel:
  i915: Reject CCS modifiers for pipe C on Geminilake
  drm/i915/gvt: Fix pipe A enable as default for vgpu
2017-12-28 05:20:07 +10:00
Steven Rostedt (VMware)
45d8b80c2a ring-buffer: Mask out the info bits when returning buffer page length
Two info bits were added to the "commit" part of the ring buffer data page
when returned to be consumed. This was to inform the user space readers that
events have been missed, and that the count may be stored at the end of the
page.

What wasn't handled, was the splice code that actually called a function to
return the length of the data in order to zero out the rest of the page
before sending it up to user space. These data bits were returned with the
length making the value negative, and that negative value was not checked.
It was compared to PAGE_SIZE, and only used if the size was less than
PAGE_SIZE. Luckily PAGE_SIZE is unsigned long which made the compare an
unsigned compare, meaning the negative size value did not end up causing a
large portion of memory to be randomly zeroed out.

Cc: stable@vger.kernel.org
Fixes: 66a8cb95ed ("ring-buffer: Add place holder recording of dropped events")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-12-27 14:18:10 -05:00
Tonghao Zhang
8cb38a6024 sctp: Replace use of sockets_allocated with specified macro.
The patch(180d8cd942ce) replaces all uses of struct sock fields'
memory_pressure, memory_allocated, sockets_allocated, and sysctl_mem
to accessor macros. But the sockets_allocated field of sctp sock is
not replaced at all. Then replace it now for unifying the code.

Fixes: 180d8cd942 ("foundations of per-cgroup memory pressure controlling.")
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tonghao Zhang <zhangtonghao@didichuxing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:47:52 -05:00
Mathieu Malaterre
76dc6c097d cpu/hotplug: Move inline keyword at the beginning of declaration
Fix non-fatal warnings such as:

kernel/cpu.c:95:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
 static void inline cpuhp_lock_release(bool bringup) { }
 ^~~~~~

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20171226140855.16583-1-malat@debian.org
2017-12-27 19:41:04 +01:00
David S. Miller
1f119f9038 Merge branch 'rds-bug-fixes'
Sowmini Varadhan says:

====================
rds bug fixes

Ran into pre-existing bugs when working on the fix for
   https://www.spinics.net/lists/netdev/msg472849.html

The bugs fixed in this patchset are unrelated to the syzbot
failure (which I'm still testing and trying to reproduce) but
meanwhile, let's get these fixes out of the way.

V2: target net-next (rds:tcp patches have a dependancy on
changes that are in net-next, but not yet in net)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:38:24 -05:00
Sowmini Varadhan
66261da169 rds: tcp: cleanup if kmem_cache_alloc fails in rds_tcp_conn_alloc()
If kmem_cache_alloc() fails in the middle of the for() loop,
cleanup anything that might have been allocated so far.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:37:27 -05:00
Sowmini Varadhan
b319109396 rds: tcp: initialize t_tcp_detached to false
Commit f10b4cff98 ("rds: tcp: atomically purge entries from
rds_tcp_conn_list during netns delete") adds the field t_tcp_detached,
but this needs to be initialized explicitly to false.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:37:27 -05:00
Sowmini Varadhan
7ae0c649c4 rds; Reset rs->rs_bound_addr in rds_add_bound() failure path
If the rds_sock is not added to the bind_hash_table, we must
reset rs_bound_addr so that rds_remove_bound will not trip on
this rds_sock.

rds_add_bound() does a rds_sock_put() in this failure path, so
failing to reset rs_bound_addr will result in a socket refcount
bug, and will trigger a WARN_ON with the stack shown below when
the application subsequently tries to close the PF_RDS socket.

     WARNING: CPU: 20 PID: 19499 at net/rds/af_rds.c:496 \
		rds_sock_destruct+0x15/0x30 [rds]
       :
     __sk_destruct+0x21/0x190
     rds_remove_bound.part.13+0xb6/0x140 [rds]
     rds_release+0x71/0x120 [rds]
     sock_release+0x1a/0x70
     sock_close+0xe/0x20
     __fput+0xd5/0x210
     task_work_run+0x82/0xa0
     do_exit+0x2ce/0xb30
     ? syscall_trace_enter+0x1cc/0x2b0
     do_group_exit+0x39/0xa0
     SyS_exit_group+0x10/0x10
     do_syscall_64+0x61/0x1a0

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:37:27 -05:00
Sudip Mukherjee
3c1490913f net: sch: api: fix tcf_block_get
The build of mips bcm47xx_defconfig is failing with the error:
net/sched/sch_fq_codel.c: In function 'fq_codel_init':
net/sched/sch_fq_codel.c:487:8: error:
	too many arguments to function 'tcf_block_get'

While adding the extack support, the commit missed adding it in the
headers when CONFIG_NET_CLS is not defined.

Fixes: 8d1a77f974 ("net: sch: api: add extack support in tcf_block_get")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 13:34:42 -05:00
Daniel Borkmann
624588d9d6 Merge branch 'bpf-stack-depth-tracking-fixes'
Alexei Starovoitov says:

====================
Jann reported an issue with stack depth tracking. Fix it and add tests.
Also fix off-by-one error in MAX_CALL_FRAMES check. This set is on top
of Jann's "selftest for late caller stack size increase" test.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-27 18:36:24 +01:00
Alexei Starovoitov
aada9ce644 bpf: fix max call depth check
fix off by one error in max call depth check
and add a test

Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-27 18:36:23 +01:00
Alexei Starovoitov
6b86c4217c selftests/bpf: additional stack depth tests
to test inner logic of stack depth tracking

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-27 18:36:23 +01:00
Alexei Starovoitov
70a87ffea8 bpf: fix maximum stack depth tracking logic
Instead of computing max stack depth for current call chain
during the main verifier pass track stack depth of each
function independently and after do_check() is done do
another pass over all instructions analyzing depth
of all possible call stacks.

Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-27 18:36:23 +01:00
Jann Horn
6b80ad2992 bpf: selftest for late caller stack size increase
This checks that it is not possible to bypass the total stack size check in
update_stack_depth() by calling a function that uses a large amount of
stack memory *before* using a large amount of stack memory in the caller.

Currently, the first added testcase causes a rejection as expected, but
the second testcase is (AFAICS incorrectly) accepted:

[...]
#483/p calls: stack overflow using two frames (post-call access) FAIL
Unexpected success to load!
0: (85) call pc+2
caller:
 R10=fp0,call_-1
callee:
 frame1: R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0
3: (72) *(u8 *)(r10 -300) = 0
4: (b7) r0 = 0
5: (95) exit
returning from callee:
 frame1: R0_w=inv0 R1=ctx(id=0,off=0,imm=0) R10=fp0,call_0
to caller at 1:
 R0_w=inv0 R10=fp0,call_-1

from 5 to 1: R0=inv0 R10=fp0,call_-1
1: (72) *(u8 *)(r10 -300) = 0
2: (95) exit
processed 6 insns, stack depth 300+300
[...]
Summary: 704 PASSED, 1 FAILED

AFAICS the JIT-generated code for the second testcase shows that this
really causes the stack pointer to be decremented by 300+300:

first function:
00000000  55                push rbp
00000001  4889E5            mov rbp,rsp
00000004  4881EC58010000    sub rsp,0x158
0000000B  4883ED28          sub rbp,byte +0x28
[...]
00000025  E89AB3AFE5        call 0xffffffffe5afb3c4
0000002A  C685D4FEFFFF00    mov byte [rbp-0x12c],0x0
[...]
00000041  4883C528          add rbp,byte +0x28
00000045  C9                leave
00000046  C3                ret

second function:
00000000  55                push rbp
00000001  4889E5            mov rbp,rsp
00000004  4881EC58010000    sub rsp,0x158
0000000B  4883ED28          sub rbp,byte +0x28
[...]
00000025  C685D4FEFFFF00    mov byte [rbp-0x12c],0x0
[...]
0000003E  4883C528          add rbp,byte +0x28
00000042  C9                leave
00000043  C3                ret

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-27 18:35:07 +01:00
Guilherme G. Piccoli
f7084059a9 bnx2x: Improve reliability in case of nested PCI errors
While in recovery process of PCI error (called EEH on PowerPC arch),
another PCI transaction could be corrupted causing a situation of
nested PCI errors. Also, this scenario could be reproduced with
error injection mechanisms (for debug purposes).

We observe that in case of nested PCI errors, bnx2x might attempt to
initialize its shmem and cause a kernel crash due to bad addresses
read from MCP. Multiple different stack traces were observed depending
on the point the second PCI error happens.

This patch avoids the crashes by:

 * failing PCI recovery in case of nested errors (since multiple
 PCI errors in a row are not expected to lead to a functional
 adapter anyway), and by,

 * preventing access to adapter FW when MCP is failed (we mark it as
 failed when shmem cannot get initialized properly).

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 12:13:32 -05:00
David S. Miller
81487bf1f6 Merge branch 'l2tp-next'
Lorenzo Bianconi says:

====================
l2tp: fix offset/peer_offset conf parameters

This patchset add peer_offset configuration parameter in order to
specify two different values for payload offset on tx/rx side.
Moreover fix missing print session offset info
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 12:11:52 -05:00
Lorenzo Bianconi
f15bc54eee l2tp: add peer_offset parameter
Introduce peer_offset parameter in order to add the capability
to specify two different values for payload offset on tx/rx side.
If just offset is provided by userspace use it for rx side as well
in order to maintain compatibility with older l2tp versions

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 12:11:51 -05:00
Hangbin Liu
820da53575 l2tp: fix missing print session offset info
Report offset parameter in L2TP_CMD_SESSION_GET command if
it has been configured by userspace

Fixes: 309795f4be ("l2tp: Add netlink control API for L2TP")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27 12:11:51 -05:00
Roger He
9de2fb99eb drm/ttm: use an operation ctx for ttm_mem_global_alloc_page
forward the operation context to ttm_mem_global_alloc_page as well,
and the ultimate goal is swapout enablement for reserved BOs.

Here reserved BOs refer to all the BOs which share same reservation object

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:38:55 -05:00
Roger He
279c01f6ef drm/ttm: use an operation ctx for ttm_mem_global_alloc
forward the operation context to ttm_mem_global_alloc as well, and the
ultimate goal is swapout enablement for reserved BOs

Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:38:54 -05:00
Roger He
a6c26af8a4 drm/ttm: call ttm_bo_swapout directly when ttm shrink
remove the extra indirection because we have only one implementation anyway

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:38:11 -05:00
Tan Xiaojun
44835a8627 drm/vmwgfx: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:35 -05:00
Tan Xiaojun
56a91d20b6 drm/virtio: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:29 -05:00
Tan Xiaojun
f8506d3272 drm/radeon: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:23 -05:00
Tan Xiaojun
30567ba5f5 drm/qxl: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:17 -05:00
Tan Xiaojun
7d046fc7d6 drm/nouveau: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:10 -05:00
Tan Xiaojun
c85de77433 drm/mgag200: remove the default io_mem_pfn set
The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-27 11:35:03 -05:00