We do not need locking in xfrm_trans_queue because it is designed
to use per-CPU buffers. However, the original code incorrectly
used skb_queue_tail which takes the lock. This patch switches
it to __skb_queue_tail instead.
Reported-and-tested-by: Artem Savkov <asavkov@redhat.com>
Fixes: acf568ee85 ("xfrm: Reinject transport-mode packets...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Some GPIO lines appear named "?" in the lsgpio dump due to their
requesting drivers not passing a reasonable label.
Most typically this happens if a device tree node just defines
gpios = <...> and not foo-gpios = <...>, the former gets named
"foo" and the latter gets named "?".
However the struct device passed in is always valid so let's
just label the GPIO with dev_name() on the device if no proper
label was passed.
Cc: Reported-by: Jason Kridner <jkridner@beagleboard.org>
Reported-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
crypto_poly1305_final() no longer requires a cra_alignmask, and nothing
else in the x86 poly1305-simd implementation does either. So remove the
cra_alignmask so that the crypto API does not have to unnecessarily
align the buffers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that nothing in poly1305-generic assumes any special alignment,
remove the cra_alignmask so that the crypto API does not have to
unnecessarily align the buffers.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the only part of poly1305-generic which is assuming special
alignment is the part where the final digest is written. Switch this
over to the unaligned access macros so that we'll be able to remove the
cra_alignmask.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a message posted to the crypto notifier chain when an algorithm
is unregistered, and when a template is registered or unregistered. But
nothing is listening for those messages; currently there are only
listeners for the algorithm request and registration messages.
Get rid of these unused notifications for now.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reference counters should use refcount_t rather than atomic_t, since the
refcount_t implementation can prevent overflows, reducing the
exploitability of reference leak bugs. crypto_alg.cra_refcount is a
reference counter with the usual semantics, so switch it over to
refcount_t.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the hash support in the SafeXcel driver when the update
size is a multiple of a block size, and when a final call is made just
after with a size of 0. In such cases the driver should cache the last
block from the update to avoid handling 0 length data on the final call
(that's a hardware limitation).
Cc: stable@vger.kernel.org
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a parameter in the SafeXcel ahash request structure to
keep track of the number of SG entries mapped. This allows not to call
dma_unmap_sg() when dma_map_sg() wasn't called in the first place. This
also removes a warning when the debugging of the DMA-API is enabled in
the kernel configuration: "DMA-API: device driver tries to free DMA
memory it has not allocated".
Cc: stable@vger.kernel.org
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ccm-aes-ppc4xx now fails one of testmgr's expected
failure test cases as such:
|decryption failed on test 10 for ccm-aes-ppc4xx:
|ret was 0, |expected -EBADMSG
It doesn't look like the hardware sets the authentication failure
flag. The original vendor source from which this was ported does
not have any special code or notes about why this would happen or
if there are any WAs.
Hence, this patch converts the aead_done callback handler to
perform the icv check in the driver. And this fixes the false
negative and the ccm-aes-ppc4xx passes the selftests once again.
|name : ccm(aes)
|driver : ccm-aes-ppc4xx
|module : crypto4xx
|priority : 300
|refcnt : 1
|selftest : passed
|internal : no
|type : aead
|async : yes
|blocksize : 1
|ivsize : 16
|maxauthsize : 16
|geniv : <none>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
KBUILD_MODNAME provides the same value.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto4xx_device's name variable is not set to anything.
The common devname for request_irq seems to be the module
name. This will fix the seemingly anonymous interrupt
entry in /proc/interrupts for crypto4xx.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the crypto4xx RevB cores
found in the 460EX, 460SX and later cores (like the APM821xx).
Without this patch, the crypto4xx driver will not be
able to process any offloaded requests and simply hang
indefinitely.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It is possible to avoid the ce_base null pointer check in the
drivers' interrupt handler routine "crypto4xx_ce_interrupt_handler()"
by simply doing the iomap in front of the IRQ registration.
This way, the ce_base will always be valid in the handler and
a branch in an critical path can be avoided.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for True Random Number Generator found in Samsung Exynos
5250+ SoCs.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add SPDX license identifier according to the type of license text found
in the file.
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
syzkaller triggered a NULL pointer dereference in crypto_remove_spawns()
via a program that repeatedly and concurrently requests AEADs
"authenc(cmac(des3_ede-asm),pcbc-aes-aesni)" and hashes "cmac(des3_ede)"
through AF_ALG, where the hashes are requested as "untested"
(CRYPTO_ALG_TESTED is set in ->salg_mask but clear in ->salg_feat; this
causes the template to be instantiated for every request).
Although AF_ALG users really shouldn't be able to request an "untested"
algorithm, the NULL pointer dereference is actually caused by a
longstanding race condition where crypto_remove_spawns() can encounter
an instance which has had spawn(s) "grabbed" but hasn't yet been
registered, resulting in ->cra_users still being NULL.
We probably should properly initialize ->cra_users earlier, but that
would require updating many templates individually. For now just fix
the bug in a simple way that can easily be backported: make
crypto_remove_spawns() treat a NULL ->cra_users list as empty.
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The EB MP board probably has a character LCD but the board manual does
not really state which IRQ it has assigned to this device. The invalid
assignment was a mistake by me during submission of the DTSI where I was
looking for the reference, didn't find it and didn't fill it in.
Delete this for now: it can probably be fixed but that requires access
to the actual board for some trial-and-error experiments.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
- use PTR_ERR_OR_ZERO were relevant in at91_cf
-----BEGIN PGP SIGNATURE-----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=axsG
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.16-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
drivers for 4.16
- use PTR_ERR_OR_ZERO were relevant in at91_cf
* tag 'at91-ab-4.16-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
pcmcia: at91_cf: Use PTR_ERR_OR_ZERO()
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
-----BEGIN PGP SIGNATURE-----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=BW4/
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.16
- New boards:
- Axentia Nattis with Natte power
- sama5d2 PTC ek
- Document and use extended TCB bindings
* tag 'at91-ab-4.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
ARM: dts: at91: sama5d2_ptc_ek: use TCB0 as timers
ARM: dts: at91: sama5d27_som1_ek: use TCB0 as timers
ARM: dts: at91: sama5d2 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d2: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: vinco: use TCB2 as timers
ARM: dts: at91: ma5d4: use TCB2 as timers
ARM: dts: at91: sama5d4 Xplained: use TCB2 as timers
ARM: dts: at91: sama5d4ek: use TCB2 as timers
ARM: dts: at91: sama5d4: Add TCB2
ARM: dts: at91: sama5d4: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: linea/tse850-3: use TCB0 as timers
ARM: dts: at91: sama5d3xek_cmp: use TCB0 as timers
ARM: dts: at91: kizbox2: use TCB0 as timers
ARM: dts: at91: sama5d3 Xplained: use TCB0 as timers
ARM: dts: at91: sama5d3xek: use TCB0 as timers
ARM: dts: at91: sama5d3: TC blocks are also simple-mfd and syscon devices
ARM: dts: at91: kizboxmini: use TCB0 as timers
ARM: dts: at91: cosino: use TCB0 as timers
ARM: dts: at91: acme/g25: use TCB0 as timers
ARM: dts: at91: at91sam9x5cm: use TCB0 as timers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- clean up gpios properties by macro
- add GPIO hog for PXs3 reference node
- add has-transaction-translator property to generic-ehci nodes
- enable more serial ports for PXs3 reference node
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kgZ1
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt64-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt
UniPhier ARM64 SoC DT updates for v4.16
- clean up gpios properties by macro
- add GPIO hog for PXs3 reference node
- add has-transaction-translator property to generic-ehci nodes
- enable more serial ports for PXs3 reference node
* tag 'uniphier-dt64-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: enable more serial ports for PXs3 ref board
arm64: dts: uniphier: add has-transaction-translator property to usb node for LD11
arm64: dts: uniphier: add GPIO hog definition for PXs3
arm64: dts: uniphier: use macros in dt-bindings header
Signed-off-by: Olof Johansson <olof@lixom.net>
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
-----BEGIN PGP SIGNATURE-----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=ykqf
-----END PGP SIGNATURE-----
Merge tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Allwinner arm64 defconfig changes for 4.16
Enables MUSB driver and the Allwinner glue layer driver by default.
All Allwinner SoCs (excluding the A80) have the Mentor Graphics Inventra
Multi-Point Hi-Speed OTG Controller (MHDRC). Enabling this extends test
coverage to this peripheral.
* tag 'sunxi-config64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: defconfig: enable MUSB HDRC along with Allwinner glue
Signed-off-by: Olof Johansson <olof@lixom.net>
There are two important changes in this round.
The first removes the redundant pinctrl setting for the MMC card detect
GPIO. We are moving to strict pinctrl/GPIO exclusion, i.e. GPIO usage
will block other pin muxing usage, and vice versa. The usage of pinmux
for guarding GPIO pins in the device tree prevents us from doing so.
This is part of an ongoing effort to clean up the existing device trees.
The other important change enables the PMIC on the Orangepi Win. The
PMIC provides power to most of the external onboard peripherals.
Enabling it will allow us to enable Ethernet or WiFi support later on.
The remaining changes in this round enable some peripheral, such as
Ethernet, an external WiFi chip, or LEDs.
-----BEGIN PGP SIGNATURE-----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=A9DZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT64 changes for 4.16
There are two important changes in this round.
The first removes the redundant pinctrl setting for the MMC card detect
GPIO. We are moving to strict pinctrl/GPIO exclusion, i.e. GPIO usage
will block other pin muxing usage, and vice versa. The usage of pinmux
for guarding GPIO pins in the device tree prevents us from doing so.
This is part of an ongoing effort to clean up the existing device trees.
The other important change enables the PMIC on the Orangepi Win. The
PMIC provides power to most of the external onboard peripherals.
Enabling it will allow us to enable Ethernet or WiFi support later on.
The remaining changes in this round enable some peripheral, such as
Ethernet, an external WiFi chip, or LEDs.
* tag 'sunxi-dt64-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: bananapi-m64: Add LED device node
arm64: dts: a64-olinuxino: Enable RTL8723BS WiFi
arm64: dts: allwinner: h5: NanoPi NEO Plus2 : add EMAC support
arm64: dts: allwinner: H5: remove redundant MMC0 card detect pin
arm64: allwinner: a64: Enable AXP803 for Orangepi Win
arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT combo
Signed-off-by: Olof Johansson <olof@lixom.net>
A random assortment of improvements.
GPIO device nodes are added for the AXP813/AXP818 PMICs, meaning we can
finally use the GPIO pins on the PMICs. The LDOs on the GPIO pins can
also be properly muxed and guarded.
EMAC Ethernet support is enabled for more H3 boards, and also for the
A83T, following the return of the bindings in 4.15, after a last minute
revert in 4.13. This will make the H3/A83T boards much more useful in
headless applications.
Two new boards are introduced. The Orange Pi R1 is a small board with
two Ethernet interfaces (one EMAC-based and one USB-based) and a WiFi
chip. This board is fully supported, with the exception of TV-out on
the expansion header, which will not be enabled by default. The WiFi
chip (RTL8189FTV) requires an out-of-tree driver. The Libre Computer
Board ALL-H3-CC H3 version is a newcomer to the Allwinner SBC space,
which was mostly represented by a bunch of fruit-Pis. It is mostly
supported, with the exception of HDMI and camera sensor interface,
which have not been implemented yet.
Two minor patches enable the audio codec on the A13 Olinuxino, and
HDMI output on the pcDuino3 Nano.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAlpEXzcOHHdlbnNAY3Np
ZS5vcmcACgkQOJpUIZwPJDDkZxAAtJMfqVNpw/z6GeCYk0h68FlHfD+3eR9D3w1k
Sy0lug03AttWu2u15LE0RL2u/zAzT6WmfgdBXx/WcnLZhl9Gef+NSqy7MNOOef0z
uDOKRNlKBQHnp2rhltOUzRa/7mWctYfUJg7WVh8GLMOMDXTVsWTVhNuK2iOL0IyD
+zrIsRhW3D/TCyheYrKPzPW3qCY3GfWXg5NP/bLdCorLKuV45b6UVzg1k/zYKten
vIcoVsUlcaas5QHkn2nVbpGj9JqzIfOUxP0uCXgQL/OlvDs4Aa9nj3EHgIsmbJUP
6zm0QuT4P81JT6cKzfRIc0eoxxCCBwVFrgbiOAR6/oQxj36beFAiNvm3ysljHkla
31iJF1bqC8BlvYSfnaQbByCkuEIiiCbGj5aHVH0VHy306ebt8R42vICSb6B0wXKp
kApzfwY+t6XfG8WtDPMUyyTSXoZmM2fay/AZ+qHe4/YyzcN51uuC1ZSgZO+6UZn6
KLVn9k8BcvsvtWDTeWuHRo6r81kCek5OSjlc+nKd3rE3X+wu5yKMxxhsEfKy592l
HgTiwvDDZIAscAG7mOiVeA6uzl3iBEl1GqCTBQbLSv3UGA7wxmazV5ecmHXlCbMZ
aH7A3WVSuObbwQD3Zqg0aYvRuOx5RmUq3DN0PcflsI0WiylaI0XTuwpq1UyXfKBH
SVRgzKc=
=UDxH
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.16
A random assortment of improvements.
GPIO device nodes are added for the AXP813/AXP818 PMICs, meaning we can
finally use the GPIO pins on the PMICs. The LDOs on the GPIO pins can
also be properly muxed and guarded.
EMAC Ethernet support is enabled for more H3 boards, and also for the
A83T, following the return of the bindings in 4.15, after a last minute
revert in 4.13. This will make the H3/A83T boards much more useful in
headless applications.
Two new boards are introduced. The Orange Pi R1 is a small board with
two Ethernet interfaces (one EMAC-based and one USB-based) and a WiFi
chip. This board is fully supported, with the exception of TV-out on
the expansion header, which will not be enabled by default. The WiFi
chip (RTL8189FTV) requires an out-of-tree driver. The Libre Computer
Board ALL-H3-CC H3 version is a newcomer to the Allwinner SBC space,
which was mostly represented by a bunch of fruit-Pis. It is mostly
supported, with the exception of HDMI and camera sensor interface,
which have not been implemented yet.
Two minor patches enable the audio codec on the A13 Olinuxino, and
HDMI output on the pcDuino3 Nano.
* tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: h3: nanopi-m1-plus: fix missing ethernet 0 in aliases
ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1
ARM: dts: sun7i: Enable HDMI on pcDuino3 Nano
ARM: dts: sun8i: a83t: Add I2C device nodes and pinmux settings
ARM: dts: sun8i: a83t: Add I2S controller device nodes
ARM: dts: sun8i-h3: Remove allwinner,leds-active-low for non internal PHY
ARM: dts: sun8i: a83t: Enable Ethernet on two boards
ARM: dts: sun8i: a83t: add dwmac-sun8i device node
ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board
ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver.
ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs
ARM: dtsi: axp81x: add GPIO DT node
ARM: dts: sun8i: add support for Orange Pi R1
ARM: dts: sunxi: Add codec for A13 Olinuxino
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable GPIO bank2 for K2L
- Enable QSPI for K2G & K2G-EVM
- Enable UART1/2 for K2G & K2G-EVM
- Enable peripherals for K2G-ICE
- Fix C1 and C2 DTS warnings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rpPb
-----END PGP SIGNATURE-----
Merge tag 'keystone_dts_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt
ARM: Keystone DTS update for 4.16
- Enable GPIO bank2 for K2L
- Enable QSPI for K2G & K2G-EVM
- Enable UART1/2 for K2G & K2G-EVM
- Enable peripherals for K2G-ICE
- Fix C1 and C2 DTS warnings
* tag 'keystone_dts_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2l-clocks: Add missing unit name to clock nodes that have regs
ARM: dts: keystone-k2e-clocks: Add missing unit name to clock nodes that have regs
ARM: dts: keystone-hk-clocks: Add missing unit name to clock nodes that have regs
ARM: dts: keystone-clocks: Add missing unit name to clock nodes that have regs
ARM: dts: keystone: Add missing unit name to interrupt controller
ARM: dts: keystone: Get rid of usage of skeleton.dtsi
ARM: dts: keystone*: Use a single soc0 instance
ARM: dts: keystone*: Standardize license with SPDX tag
ARM: dts: k2g-evm: Enable UART 2
ARM: dts: k2g: Add UART 1 and 2 instances
ARM: dts: keystone: Add generic compatible string for I2C EEPROM
ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals
ARM: dts: keystone-k2g-evm: Add QSPI DT node.
ARM: dts: keystone-k2g: Move ti,non-removable property to board dts
ARM: dts: keystone-k2g-evm: Fix botched up merge
ARM: dts: keystone-k2g: Add QSPI DT entry
ARM: dts: keystone-k2l: Add the second gpio bank node
Signed-off-by: Olof Johansson <olof@lixom.net>
It is :
- the conversion to the new parser sharpslpart parser
for the Sharp variants
- an I2C platform data cleanup for PXA
- a gpioreg switch of one register for lubbock
-----BEGIN PGP SIGNATURE-----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=xz4R
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux into next/soc
This is the pxa changes for v4.16 cycle.
It is :
- the conversion to the new parser sharpslpart parser
for the Sharp variants
- an I2C platform data cleanup for PXA
- a gpioreg switch of one register for lubbock
* tag 'pxa-for-4.16' of https://github.com/rjarzmik/linux:
ARM: pxa/lubbock: add GPIO driver for LUB_MISC_WR register
ARM: pxa/poodle: Remove hardcoded partitioning, use sharpslpart parser
ARM: pxa/spitz: Remove hardcoded partitioning, use sharpslpart parser
ARM: pxa/tosa: Remove hardcoded partitioning, use sharpslpart parser
ARM: pxa/corgi: Remove hardcoded partitioning, use sharpslpart parser
ARM: pxa: move header file out of I2C realm
ARM: pxa: move declarations to proper place
Signed-off-by: Olof Johansson <olof@lixom.net>
These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.
-----BEGIN PGP SIGNATURE-----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=jl6W
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Two defconfig updates for omaps
These are to configure dra7 PCIe for omap2plus_defconfig and
multi_v7_defconfig.
* tag 'omap-for-v4.16/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Signed-off-by: Olof Johansson <olof@lixom.net>
This branch mostly configures more hardware support:
- Clean-up dts files to remove leading 0x and 0s from binding notation
to remove more dtc compiler warnings
- A series of am437x updates for backlight, to fix inverted pad
pull macro, and to configure power management related OPPs
- Configure n950 and droid 4 command mode LCD panels
- Updates to pandora and gta04 LCD panels
- Add support for am574x-idk
- A series of changes to configure more dra7 related PCIe features
- A series of fixes for am335x-boneblue for WLAN, UARTs and CAN
configuration
- A series of changes to configure dra7 OPPs and VDD supplies
-----BEGIN PGP SIGNATURE-----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=G2ZQ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Second set of device tree changes for omaps for v4.16 merge window
This branch mostly configures more hardware support:
- Clean-up dts files to remove leading 0x and 0s from binding notation
to remove more dtc compiler warnings
- A series of am437x updates for backlight, to fix inverted pad
pull macro, and to configure power management related OPPs
- Configure n950 and droid 4 command mode LCD panels
- Updates to pandora and gta04 LCD panels
- Add support for am574x-idk
- A series of changes to configure more dra7 related PCIe features
- A series of fixes for am335x-boneblue for WLAN, UARTs and CAN
configuration
- A series of changes to configure dra7 OPPs and VDD supplies
* tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"
ARM: dts: am572x-idk: Add cpu0 vdd supply
ARM: dts: am571x-idk: Add cpu0 vdd supply
ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply
ARM: dts: dra7-evm: Add cpu0 vdd supply
ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply
ARM: dts: dra7: Enable 1.5 GHz operation for the CPU
ARM: dts: dra7: Add MPU OPP supply node
ARM: dts: dra7: Add vbb-supply to cpu and additional voltages
ARM: dts: am335x-boneblue: enable can
ARM: dts: am335x-boneblue: enable usarts
ARM: dts: am335x-boneblue: fix wl1835 IRQ pin
ARM: dts: dra7: Remove deprecated PCI compatible string
ARM: dts: dra76-evm: Enable x2 PCIe lanes
ARM: dts: DRA72x: Use PCIe compatible specific to dra72
ARM: dts: DRA74x: Use PCIe compatible specific to dra74
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
ARM: dts: am57xx: Add support for am574x-idk
ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supply
ARM: dts: am437x-idk-evm: Disable OPP50 for MPU
...
Signed-off-by: Olof Johansson <olof@lixom.net>
We now have gotten ti-sysc driver to the point where it can parse
interconnect target configuration from device tree instead of the
legacy platform data. This series updates the device tree binding
and adds parsing to the driver for quirks and capabilities.
-----BEGIN PGP SIGNATURE-----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=Hwvv
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
TI sysc driver updates for v4.16 merge window
We now have gotten ti-sysc driver to the point where it can parse
interconnect target configuration from device tree instead of the
legacy platform data. This series updates the device tree binding
and adds parsing to the driver for quirks and capabilities.
* tag 'omap-for-v4.16/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Add parsing of module capabilities
bus: ti-sysc: Handle module quirks based dts configuration
bus: ti-sysc: Detect i2c interconnect target module based on register layout
bus: ti-sysc: Add register bits for interconnect target modules
bus: ti-sysc: Make omap_hwmod_sysc_fields into sysc_regbits platform data
ARM: OMAP2+: Move all omap_hwmod_sysc_fields to omap_hwmod_common_data.c
ARM: dts: Add generic ti,sysc compatible in addition to the custom ones
dt-bindings: ti-sysc: Update binding for timers and capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.
The other changes add support for detecting new dra762 SoC variant.
-----BEGIN PGP SIGNATURE-----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=wejU
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Second set of SoC changes for omaps for v4.16 merge window
We can now drop some more of legacy platform data for omap3 as
it's been booting in device tree only mode for quite a while now.
This clock related data is coming from device tree configured
clocks now.
The other changes add support for detecting new dra762 SoC variant.
* tag 'omap-for-v4.16/soc-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: dra762: Register package specific hwmod
ARM: OMAP2+: dra762: Add support for device package identification
ARM: OMAP2+: Drop unused legacy data for prcm_reg_id and module_bit
Signed-off-by: Olof Johansson <olof@lixom.net>
Adding the cpu frequency scaling support for Armada 37xx
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzhHyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71WygAJ9poqfM0F76
GCywSaql9D//YLIMBwCggBJU4OCJCgNJx/KN9n0+WmaM65M=
=D4Xs
-----END PGP SIGNATURE-----
Merge tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu arm64 for 4.16 (part 1)
Adding the cpu frequency scaling support for Armada 37xx
* tag 'mvebu-arm64-4.16-1' of git://git.infradead.org/linux-mvebu:
arm64: defconfig: enable ARM_ARMADA_37XX_CPUFREQ
Signed-off-by: Olof Johansson <olof@lixom.net>
Add the NAND support on the Marvell 8040-DB board
Add the thermal support for Martvell A7K/A8K Socs
Add nodes allowing cpufreq support on Aramda 3700 SoCs
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzjGiMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71eRxAKCkcg3nYB1F
MLYZ5pQg0SA8p8IOPwCfczw9Uui9xxSaMnEjBgcDOZnkoSo=
=9aGc
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.16-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt64 for 4.16 (part 1)
Add the NAND support on the Marvell 8040-DB board
Add the thermal support for Martvell A7K/A8K Socs
Add nodes allowing cpufreq support on Aramda 3700 SoCs
* tag 'mvebu-dt64-4.16-1' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: Add thermal support for A7K/A8K
arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq support
arm64: dts: marvell: add NAND support on the 8040-DB board
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix potential dtc warnings on kirkwoods files
Declare a new pin (RB) usbale for NAND controller on Armada 38x
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWjzh4yMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71c6eAKCJWCDib+4j
So2W8yQbI+glOCfjQACfaFGVosbxIilV4+l1bUZJFXHTSSk=
=uIda
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.16-1' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.16 (part 1)
Fix potential dtc warnings on kirkwoods files
Declare a new pin (RB) usbale for NAND controller on Armada 38x
* tag 'mvebu-dt-4.16-1' of git://git.infradead.org/linux-mvebu:
arm: kirkwood: dts: Use lower case for bindings notation
ARM: dts: armada-38x: Add NAND RB pinctrl information
Signed-off-by: Olof Johansson <olof@lixom.net>
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
-----BEGIN PGP SIGNATURE-----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=0tvJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.16
* rcar-sysc: Keep wakeup sources active during system suspend
Geert Uytterhoeven says "If an R-Car SYSC slave device is part of the
CPG/MSTP or CPG/MSSR Clock Domain and to be used as a wakeup source, it
must be kept active during system suspend.
Currently this is handled in device-specific drivers by explicitly
increasing the use count of the module clock when the device is
configured as a wakeup source. However, the proper way to prevent the
device from being stopped is to inform this requirement to the genpd
core, by setting the GENPD_FLAG_ACTIVE_WAKEUP flag.
Note that this will only affect devices configured as wakeup sources."
* tag 'renesas-soc2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
Signed-off-by: Olof Johansson <olof@lixom.net>
* r8a7745 (RZ/G1E) SoC
- Enable SMP
Fabrizio Castro says "Add DT node for the Advanced Power Management
Unit (APMU), add the second CPU core, and use "renesas,apmu" as
"enable-method"."
* r8a7743 (RZ/G1M) SoC
- Add node for thermal sensor module with thermal-zone support
* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
- Add:
+ Renesas Core Match Timer (CMT) support
+ Renesas Timer Pulse Unit PWM Controller (TPU) support
+ Renesas PWM Timer Controller (PWM) support
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
- Add sound support
* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
- Allow DTBs of boards of these SoCs to build without any warnings when
compiled with W=1 using gcc-linaro-5.4.1-2017.05
+ Move nodes which have no reg property out of bus, they don't belong there
+ Also sort sub-nodes of root node to allow for easier maintenance
* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
- Correct critical CPU temperature
Chris Paterson says "The current R-Car Gen2 device trees define the CPU
critical temperature as 115°C.
The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95°C is a safer value to use.
This value should also apply to r8a7792 but thermal sensor support has
not been added yet."
* r8a7740 (R-Mobile A1) SoC
- Correct TPU register block size
Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
outside the declared register block. Enlarge the register block size to
fix this.
This was probably based on the old platform code, which also assumed a
register block size of 0x100."
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAlo83NsACgkQ189kaWo3
T75/Ug/+K0JFjXfzVGLLhQ0GYV+nJLD2Rz5J0WOISZSKQ2MMuIDNPYa/r2edOzkV
qp75Fjp0FE0XvYQQwPsKSY8Nt0CRg1j/wYw9wMvJZ1lJUgeL9DuLhzqZ2mlvv0v9
gLaZau011QpKv3k/MoOVEPOUrKBSqhBJaTZ3ufv/tYvpI/if//8jRafdkLPzSPcQ
IktmihGIiB2uJeCwZsEfhn3kWvjc4PegVbL6jkTrHd21oDA7KYnCLP7XBi3eut1C
smVzcN+NofAIDgk7x+R6XdEl6bJejUEox/ixk/HgJ2yjD2bsI8ILL6Mx2BKREg6x
oYJlmXo6/XNep+9H45JaTCgRJfzhfFQu15PAYE8qROeGcoFm7tnGLXYe0zEaXy9G
K22dkZog+uLpwCeHpXYsXFDknhQPds3a/nd4crpVlmsnfuhdLYwAn4IxWnBBl/SV
u9xHegfrexqT8pE44JDA+cWqGQz2gss33pBejJqB+3HEijg/CQ43eZbQVEYpMx01
a/9mQqJvk3IyC6EyzxMWfq9k8e0rcq6APRu+dd2oPyUTVNKgWuQXHHyyzIlzn55w
NvbUf5W6wyxa/kA2l8XeBHToKAn1pBbhEakIF1tGYKB1a8AfHbuHXeuXLFLNmQDN
3ON16LEEzqBlHjn2kxHG/gbFUTHXDl1gwBPo92CATuHe+P8TG+Q=
=2oL+
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.16
* r8a7745 (RZ/G1E) SoC
- Enable SMP
Fabrizio Castro says "Add DT node for the Advanced Power Management
Unit (APMU), add the second CPU core, and use "renesas,apmu" as
"enable-method"."
* r8a7743 (RZ/G1M) SoC
- Add node for thermal sensor module with thermal-zone support
* r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs
- Add:
+ Renesas Core Match Timer (CMT) support
+ Renesas Timer Pulse Unit PWM Controller (TPU) support
+ Renesas PWM Timer Controller (PWM) support
* r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven and
r8a7745 (RZ/G1E) iW-RainboW-G22D development platforms
- Add sound support
* r8a7743 (RZ/G1M), r8a7745 (RZ/G1E) and r8a7792 (R-Car V2H) SoCs
- Allow DTBs of boards of these SoCs to build without any warnings when
compiled with W=1 using gcc-linaro-5.4.1-2017.05
+ Move nodes which have no reg property out of bus, they don't belong there
+ Also sort sub-nodes of root node to allow for easier maintenance
* r8a7790 (R-Car H2), r8a7791 (R-Car M2-W) and r8a7793 (R-Car M2-N) SoCs
- Correct critical CPU temperature
Chris Paterson says "The current R-Car Gen2 device trees define the CPU
critical temperature as 115°C.
The R-Car hardware manuals state that Tc = –40°C to +105°C. The thermal
sensor has an accuracy of ±5°C and there can be a temperature
difference of 1 or 2 degrees between Tjmax and the thermal sensor due
to the location of the latter.
This means that 95°C is a safer value to use.
This value should also apply to r8a7792 but thermal sensor support has
not been added yet."
* r8a7740 (R-Mobile A1) SoC
- Correct TPU register block size
Geert Uytterhoven says "The Timer Pulse Unit has registers that lie
outside the declared register block. Enlarge the register block size to
fix this.
This was probably based on the old platform code, which also assumed a
register block size of 0x100."
* tag 'renesas-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (37 commits)
ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core
ARM: dts: iwg22d-sodimm: Sound DMA support via DVC on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support via SRC on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF on DTS
ARM: dts: iwg22d-sodimm: Sound DMA support on DTS
ARM: dts: iwg22d-sodimm: Sound PIO support
ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec
ARM: dts: r8a7745: Add sound support
ARM: dts: r8a7745: Add audio DMAC support
ARM: dts: r8a7745: Add audio clocks
ARM: dts: r8a7740: Correct TPU register block size
ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus
ARM: dts: r8a7743: sort root sub-nodes alphabetically
ARM: dts: iwg20d-q7-common: Sound DMA support via DVC on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support via SRC on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF on DTS
ARM: dts: iwg20d-q7-common: Sound DMA support on DTS
ARM: dts: iwg20d-q7-common: Sound PIO support
ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec
ARM: dts: r8a7792: move timer node out of bus
...
Signed-off-by: Olof Johansson <olof@lixom.net>
shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
carrier board, as a built-in
multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a module
-----BEGIN PGP SIGNATURE-----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=7Fzq
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Defconfig Updates for v4.16
shmobile_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a built-in
* Enable SGTL5000 audio codec, which is present on the he iWave RZ/G1M Q7
carrier board, as a built-in
multi_v7_defconfig:
* Enable PWM timers, which are present on R-Car and RZ/G1 platforms,
as a module
* tag 'renesas-defconfig-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: defconfig: Enable PWM
ARM: multi_v7_defconfig: Select PWM_RCAR as module
ARM: shmobile: defconfig: Enable SGTL5000 audio codec
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add usb3_phy node to r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W) SoCs, and
enable usb3_peri0 on salvator boards
* Allow DTBs of boards of r8a7795 (R-Car H3) and r8a7796 SoCs to build
without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05
- Move nodes which have no reg property out of bus, they don't belong there
- Add reg properties to dummy pciec[01] nodes
- Also sort sub-nodes of root node to allow for easier maintenance
* Add Add EthernetAVB PHY reset to r8a7795 (R-Car H3) and r8a7796 SoCs boards.
Geert Uytterhoeven says "... add properties to describe the EthernetAVB
PHY reset topology to the common Salvator-X/XS and ULCB DTS files, which
solves two issues:
1. On Salvator-XS, the enable pin of the regulator providing PHY power
is connected to PRESETn, and PSCI powers down the SoC during system
suspend. Hence a PHY reset is needed to restore network
functionality after system resume.
2. Linux should not rely on the boot loader having reset the PHY, but
should reset the PHY during driver probe."
-----BEGIN PGP SIGNATURE-----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=L57U
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM64 Based SoC DT Updates for v4.16
* Add usb3_phy node to r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W) SoCs, and
enable usb3_peri0 on salvator boards
* Allow DTBs of boards of r8a7795 (R-Car H3) and r8a7796 SoCs to build
without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05
- Move nodes which have no reg property out of bus, they don't belong there
- Add reg properties to dummy pciec[01] nodes
- Also sort sub-nodes of root node to allow for easier maintenance
* Add Add EthernetAVB PHY reset to r8a7795 (R-Car H3) and r8a7796 SoCs boards.
Geert Uytterhoeven says "... add properties to describe the EthernetAVB
PHY reset topology to the common Salvator-X/XS and ULCB DTS files, which
solves two issues:
1. On Salvator-XS, the enable pin of the regulator providing PHY power
is connected to PRESETn, and PSCI powers down the SoC during system
suspend. Hence a PHY reset is needed to restore network
functionality after system resume.
2. Linux should not rely on the boot loader having reset the PHY, but
should reset the PHY during driver probe."
* tag 'renesas-arm64-dt2-for-v4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: salvator-common: enable usb3_peri0
arm64: dts: renesas: salvator-common: enable usb3_phy0 node
arm64: dts: renesas: r8a7796: add usb3_phy node
arm64: dts: renesas: r8a7795: add usb3_phy node
arm64: dts: renesas: r8a7796: add reg properties to pciec[01] nodes
arm64: dts: renesas: r8a7796: move nodes which have no reg property out of bus
arm64: dts: renesas: r8a7796: sort subnodes of root node alphabetically
arm64: dts: renesas: r8a7795: sort subnodes of root node alphabetically
arm64: dts: renesas: ulcb: Add EthernetAVB PHY reset
arm64: dts: renesas: salvator-common: Add EthernetAVB PHY reset
arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
Signed-off-by: Olof Johansson <olof@lixom.net>
The SPS power domain driver is extended for S700 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=u1IY
-----END PGP SIGNATURE-----
Merge tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers
Actions Semi SoC drivers for v4.16
The SPS power domain driver is extended for S700 SoC.
* tag 'actions-drivers-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
soc: actions: sps: Add S700
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a DT for the Allo.com Sparky SBC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=z7/8
-----END PGP SIGNATURE-----
Merge tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/dt
Actions Semi arm based SoC DT for v4.16
This adds a DT for the Allo.com Sparky SBC.
* tag 'actions-arm-dt-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
arm: dts: owl-s500: Add Sparky
dt-bindings: arm: actions: Add Sparky
dt-bindings: Add vendor prefix for Allo.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add SD card support for the hi3798cv200-poplar board
- Replace the PMU node with exact match for the hi3660 SoC
- Add cpu capacity-dmips-mhz information for the hi3660 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=F5Y/
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.16-v2' of git://github.com/hisilicon/linux-hisi into next/dt
ARM64: DT: Hisilicon SoC DT updates for 4.16
- Add SD card support for the hi3798cv200-poplar board
- Replace the PMU node with exact match for the hi3660 SoC
- Add cpu capacity-dmips-mhz information for the hi3660 SoC
* tag 'hisi-arm64-dt-for-4.16-v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: Add hi3660 cpu capacity-dmips-mhz information
arm64: dts: hi3660: improve pmu description
arm64: dts: hi3798cv200: add SD card support
Signed-off-by: Olof Johansson <olof@lixom.net>
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
-----BEGIN PGP SIGNATURE-----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=RHHM
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux into next/drivers
This pull request contains Broadcom ARM/ARM64 based SoCs drivers changes for
4.16, please pull the following:
- Arnd provides an update to the Raspberry Pi firmware interface and uses time64_t to
print the time to make it more future proof
- Florian provides a set of updates to make the Broadcom STB Bus Interface Unit code
work on newer ARM64-based chips, as well as perform the correct interface tuning
for these chips to reach the expected performance
* tag 'arm-soc/for-4.16/drivers' of http://github.com/Broadcom/stblinux:
soc: brcmstb: biuctrl: Move to early_initcall
soc: brcmstb: Split initialization
soc: brcmstb: biuctrl: Fine tune B53 MCP interface settings
soc: brcmstb: biuctrl: Wire-up new registers
soc: brcmstb: biuctrl: Prepare for saving/restoring other registers
soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs
soc: brcmstb: Make CPU credit offset more parameterized
dt-bindings: arm: brcmstb: Correct BIUCTRL node documentation
dt-bindings: arm: Add entry for Broadcom Brahma-B53
firmware: raspberrypi: print time using time64_t
Signed-off-by: Olof Johansson <olof@lixom.net>
4.16, please pull the following:
- Stefan updates the BCM283x DTS to make consistent use of the existing GPIO
defines for the polarity specifier
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJaPE2NAAoJEIfQlpxEBwcE+cQP/RSXsFQA5GlIC4UUnS+bPud1
3y8vtNyTKuL1aS/oOnWbXhZLOprionSrh1j2sRSgOhDLez+m4LQk9ZfQfpUO+Hlj
AL4m+kQQu6G5oy/tgqk/6y8T07IrSMkHQ9P2IiMI7bD87DB2IA921yrMC+6aLkyh
jMYlyWPByCU8Jc90An7ffrO9MFvzhWq53lagwCliazcKeeyhKCC3DF1nR2155iKS
E6KXRlwHmqLP0W0KcHFahjtnX75oLqRo9zAiSAueo8X5HTqgX/bJM2x0dAjGduSA
qi5J7L5VV7761dD0KX81TgJIkdZLj/kYKp2MbH6zKX+anEDA6I3dTIqQ2rHSU7Gd
rXGmBr5gkk8RDAO6C6DlRfP6C8tci0RqHdKSX3WLbn9Sd3BxfhSXu2I2GJwM5HyN
6TB8c+8wd1iGCnby2znW3xBn4v3JdH7N7i2NluvlqzUPALoIuTv7Oa/vLMYqLfzd
0WiM558Kzgb1aSW/Kls6R3GeM9K9cCMfcvMEdumxDFkPfk75j9hHahOxu+KD8j6k
6Cind6hByY2+VvyeFckGkxVsQafgSHldaETTsLOeJO+WW4SLdGKBnBZO1pacKr0V
9kaEDhG8VxDRopFyijEUbHWmnwqSvWbOkPtiO8NYd1WSTDyz0C/wZCOD4OJr5avB
MPeJfcrdZYdpPpGH8VDA
=Xax+
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.16/devicetree' of http://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.16, please pull the following:
- Stefan updates the BCM283x DTS to make consistent use of the existing GPIO
defines for the polarity specifier
* tag 'arm-soc/for-4.16/devicetree' of http://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Use GPIO polarity defines consistently
Signed-off-by: Olof Johansson <olof@lixom.net>
-----BEGIN PGP SIGNATURE-----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=oJeP
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.15-rc7' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Just collecting some fixes to finish my hoildays :-).
A few fixes for i915 (one documentation build fix), one ttm fix, one
AMD display fix, one omapdrm fix, and a set of armada fixes from
Russell.
All seem pretty small, you can now return to your latest security news
site"
* tag 'drm-fixes-for-v4.15-rc7' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
drm/ttm: check the return value of kzalloc
drm/amd/display: call set csc_default if enable adjustment is false
docs: fix, intel_guc_loader.c has been moved to intel_guc_fw.c
omapdrm/dss/hdmi4_cec: fix interrupt handling
documentation/gpu/i915: fix docs build error after file rename
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable DC states around GMBUS on GLK
drm/i915/psr: Fix register name mess up.
drm/armada: fix YUV planar format framebuffer offsets
drm/armada: improve efficiency of armada_drm_plane_calc_addrs()
drm/armada: fix UV swap code
drm/armada: fix SRAM powerdown
drm/armada: fix leak of crtc structure
- Add tiled prefetch support to PRE
- Add format modifier support to PRG and imx-drm-core
- Use runtime PM to control PRG clock
- Allow building ipu-v3 under COMPILE_TEST
-----BEGIN PGP SIGNATURE-----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=dt6o
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux into drm-next
drm/imx: format modifier support
- Add tiled prefetch support to PRE
- Add format modifier support to PRG and imx-drm-core
- Use runtime PM to control PRG clock
- Allow building ipu-v3 under COMPILE_TEST
* tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-v3: allow to build with COMPILE_TEST
drm/imx: advertise supported plane format modifiers
drm/imx: add FB modifier support
gpu: ipu-v3: prg: add modifier support
gpu: ipu-v3: pre: add tiled prefetch support
gpu: ipu-v3: prg: switch to runtime PM
Change the previous employers email addresses to the current email
address.
Link: http://lkml.kernel.org/r/20171229121726.31589-1-jeffy.chen@rock-chips.com
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The previous fix in commit 384632e67e ("userfaultfd: non-cooperative:
fix fork use after free") corrected the refcounting in case of
UFFD_EVENT_FORK failure for the fork userfault paths.
That still didn't clear the vma->vm_userfaultfd_ctx of the vmas that
were set to point to the aborted new uffd ctx earlier in
dup_userfaultfd.
Link: http://lkml.kernel.org/r/20171223002505.593-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
