R-Car V3H (R8A77980) SoC also has the R-Car gen3 compatible I2C controller,
so document the SoC specific bindings.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add a module parameter to override SCL frequency provided by firmware.
This can be useful when testing spec compliance for I2C modes or when
debugging issues across multiple operating frequencies.
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The I2C spec UM10204 Rev. 6 specifies the following timings.
Standard Fast Mode Fast Mode Plus
SCL low 4.7us 1.3us 0.5us
SCL high 4.0us 0.6us 0.26us
This results in a 33%/66% duty cycle as opposed to the 50%/50% duty cycle
used for Standard-mode.
Add High Time Divider settings to correct duty cycle for FM(400kHz) and
FM+(1MHz).
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Previously the QUP driver limited operation mode to I2C Fast Mode. Add
Fast Mode Plus functionality by raising SCL limit from 400kHz to 1MHz.
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add support for Qualcomm Centriq devices that are qup-v2 compatible but
do not support DMA, so nodma needs to be set.
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use new return type vm_fault_t for fault handlers.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit a6a781a58b ("xfs: have buffer verifier functions
report failing address") the bad magic number return was ported
incorrectly.
Fixes: a6a781a58b
Reported-by: syzbot+08ab33be0178b76851c8@syzkaller.appspotmail.com
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.
This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file. This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
It seems the first error assignment in if branch is redundant.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Although it's not that complex, but such comment could still save
several minutes for newer reader/reviewer instead of inferring that from
the code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor wording updates ]
Signed-off-by: David Sterba <dsterba@suse.com>
Since compression.h is using the SZ_* macros, and if some file includes
only compression.h without linux/sizes.h, it will cause compile error.
One example is lzo.c, if it uses BTRFS_MAX_COMPRESSED. Fix it by adding
linux/sizes.h in compression.h
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_clone_files(), we must check the NODATASUM flag while the
inodes are locked. Otherwise, it's possible that btrfs_ioctl_setflags()
will change the flags after we check and we can end up with a party
checksummed file.
The race window is only a few instructions in size, between the if and
the locks which is:
3834 if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
3835 return -EISDIR;
where the setflags must be run and toggle the NODATASUM flag (provided
the file size is 0). The clone will block on the inode lock, segflags
takes the inode lock, changes flags, releases log and clone continues.
Not impossible but still needs a lot of bad luck to hit unintentionally.
Fixes: 0e7b824c4e ("Btrfs: don't make a file partly checksummed through file clone")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_exclude_logged_extents may call __exclude_logged_extent
which may fail.
Propagate the failures of __exclude_logged_extent to upper caller.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of setting "parent" to ref->parent only when dealing with
a shared ref and subsequently performing another check to see
if (parent > 0), check the "node->type" directly and act accordingly.
This makes the code more streamline. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of taking only specific member of this structure, which results
in 2 extra arguments, just take the delayed_extent_op struct and
reference the arguments inside the functions. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function currently takes 7 parameters, most of which are proxies
for values from btrfs_delayed_ref_node struct which is not passed. This
patch simplifies the interface of the function by simply passing said
delayed ref node struct to the function. This enables us to:
1. Move locals variables and init code related to them from
run_delayed_tree_ref which should only be used inside
alloc_reserved_tree_block, such as skinny_metadata and the btrfs_key,
representing the extent being inserted. This removes the need for the
"ins" argument. Instead, it's replaced by a local var with a more
verbose name - extent_key.
2. Now that we have a reference to the node in alloc_reserved_tree_block
the delayed_tree_ref struct can be referenced inside the function and
this enable removing the "ref->level", "parent" and "ref_root"
arguments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function already takes a transaction handle which contains a
reference to the fs_info. So use this and remove the extra argument.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The test failures are not clearly visible in the system log as they're
printed at INFO level. Add a new helper that is level ERROR. As this
touches almost all strings, I took the opportunity to unify them:
- decapitalize the first letter as there's a prefix and the text
continues after ":"
- glue strings split to more lines and un-indent so they fit to 80
columns
- use %llu instead of %Lu
- drop \n from the modified messages (test_msg is left untouched)
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the ARM CCI PMU driver can be built as a loadable module,
we get a link failure when MCPM is enabled:
ERROR: "mcpm_is_available" [drivers/perf/arm-cci.ko] undefined!
The simplest fix is to export that helper function.
Fixes: 8b0c93c20e ("perf/arm-cci: Allow building as a module")
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We should remove O_NONBLOCK flag when calling sock->ops->connect()
in sctp_connect_to_sock() function.
Why?
1. up to now, sctp socket connect() function ignores the flag argument,
that means O_NONBLOCK flag does not take effect, then we should remove
it to avoid the confusion (but is not urgent).
2. for the future, there will be a patch to fix this problem, then the flag
argument will take effect, the patch has been queued at https://git.kernel.o
rg/pub/scm/linux/kernel/git/davem/net.git/commit/net/sctp?id=644fbdeacf1d3ed
d366e44b8ba214de9d1dd66a9.
But, the O_NONBLOCK flag will make sock->ops->connect() directly return
without any wait time, then the connection will not be established, DLM kernel
module will call sock->ops->connect() again and again, the bad results are,
CPU usage is almost 100%, even trigger soft_lockup problem if the related
configurations are enabled,
DLM kernel module also prints lots of messages like,
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
The upper application (e.g. ocfs2 mount command) is hanged at new_lockspace(),
the whole backtrace is as below,
tb0307-nd2:~ # cat /proc/2935/stack
[<0>] new_lockspace+0x957/0xac0 [dlm]
[<0>] dlm_new_lockspace+0xae/0x140 [dlm]
[<0>] user_cluster_connect+0xc3/0x3a0 [ocfs2_stack_user]
[<0>] ocfs2_cluster_connect+0x144/0x220 [ocfs2_stackglue]
[<0>] ocfs2_dlm_init+0x215/0x440 [ocfs2]
[<0>] ocfs2_fill_super+0xcb0/0x1290 [ocfs2]
[<0>] mount_bdev+0x173/0x1b0
[<0>] mount_fs+0x35/0x150
[<0>] vfs_kern_mount.part.23+0x54/0x100
[<0>] do_mount+0x59a/0xc40
[<0>] SyS_mount+0x80/0xd0
[<0>] do_syscall_64+0x76/0x140
[<0>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[<0>] 0xffffffffffffffff
So, I think we should remove O_NONBLOCK flag here, since DLM kernel module can
not handle non-block sockect in connect() properly.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When the arm-cci driver is enabled, but both CONFIG_ARM_CCI5xx_PMU and
CONFIG_ARM_CCI400_PMU are not, we get a warning about how parts of
the driver are never used:
drivers/perf/arm-cci.c:1454:29: error: 'cci_pmu_models' defined but not used [-Werror=unused-variable]
drivers/perf/arm-cci.c:693:16: error: 'cci_pmu_event_show' defined but not used [-Werror=unused-function]
drivers/perf/arm-cci.c:685:16: error: 'cci_pmu_format_show' defined but not used [-Werror=unused-function]
Marking all three functions as __maybe_unused avoids the warnings in
randconfig builds. I'm doing this lacking any ideas for a better fix.
Fixes: 3de6be7a3d ("drivers/bus: Split Arm CCI driver")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Geert Uytterhoeven <geert@linux-m68k.org> reported:
> HOSTLD scripts/mod/modpost
> CC arch/sh/kernel/traps_32.o
> arch/sh/kernel/traps_32.c: In function 'do_divide_error':
> arch/sh/kernel/traps_32.c:606:17: error: 'code' may be used uninitialized in this function [-Werror=uninitialized]
> cc1: all warnings being treated as errors
It is clear from inspection that do_divide_error is only called with
TRAP_DIVZERO_ERROR or TRAP_DIVOVF_ERROR, as that is the way
set_exception_table_vec is called. So let gcc know the other cases
should not be considered by returning in all other cases.
This removes the warning and let's the code continue to build.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c65626c0cd ("signal/sh: Use force_sig_fault where appropriate")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The information about a size change in this case just creates confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only used in block_dev.c and the partitions code, and it should remain
that way..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After the recent timeout handling changes, we have two holes in
the struct. Move the timeout near the deadline, killing both,
and moving related members closer together. On my config on
x86-64, this shrinks struct request from 312 to 304 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
libiscsi is the only SCSI code that return BLK_EH_HANDLED, thus trying to
bypass the normal SCSI EH code. We are going to remove this return value
at the block layer, and at least from a quick look it doesn't look too
harmful to try to send an abort for these cases, especially as the first
one should not actually be possible. If this doesn't work out iscsi
will probably need its own eh_strategy_handler instead to just do the
right thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
[While this keeps existing behavior it seems to mismatch the comment,
maintainers please chime in!]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NVMe always completes the request before returning from ->timeout, either
by polling for it, or by disabling the controller. Return BLK_EH_DONE so
that the block layer doesn't even try to complete it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The BLK_EH_NOT_HANDLED implies nothing happen, but very often that
is not what is happening - instead the driver already completed the
command. Fix the symbolic name to reflect that a little better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch simplifies the timeout handling by relying on the request
reference counting to ensure the iterator is operating on an inflight
and truly timed out request. Since the reference counting prevents the
tag from being reallocated, the block layer no longer needs to prevent
drivers from completing their requests while the timeout handler is
operating on it: a driver completing a request is allowed to proceed to
the next state without additional syncronization with the block layer.
This also removes any need for generation sequence numbers since the
request lifetime is prevented from being reallocated as a new sequence
while timeout handling is operating on it.
To enables this a refcount is added to struct request so that request
users can be sure they're operating on the same request without it
changing while they're processing it. The request's tag won't be
released for reuse until both the timeout handler and the completion
are done with it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: slight cleanups, added back submission side hctx lock, use cmpxchg
for completions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We would generally expect pagetables to be read by the IOMMU more than
written by the CPU, so in NUMA systems it makes sense to locate them
close to the former and avoid cross-node pagetable walks if at all
possible. As it turns out, we already have a handle on the IOMMU device
for the sake of coherency management, so it's trivial to grab the
appropriate NUMA node when allocating new pagetable pages.
Note that we drop the semantics of alloc_pages_exact(), but that's fine
since they have never been necessary: the only time we're allocating
more than one page is for stage 2 top-level concatenation, but since
that is based on the number of IPA bits, the size is always some exact
power of two anyway.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0)
in be_detect_error() to know whether the error is valid error or not
Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3")
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Netgear Aircard 779S
Signed-off-by: Josh Hill <josh@joshuajhill.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
We augment the GPIO regulator to get the *enable* regulator
GPIO line (not the other lines) using a descriptor rather than
a global number.
We then pass this into the regulator core which has been
prepared to hande enable descriptors in a separate patch.
Switch over the two boardfiles using this facility and clean
up so we only pass descriptors around.
Cc: Philipp Zabel <philipp.zabel@gmail.com> # HX4700/Magician maintainer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As we augmented the regulator core to accept a GPIO descriptor instead
of a GPIO number, we can augment the fixed GPIO regulator to look up
and pass that descriptor directly from device tree or board GPIO
descriptor look up tables.
Some boards just auto-enumerate their fixed regulator platform devices
and I have assumed they get names like "fixed-regulator.0" but it's
pretty hard to guess this. I need some testing from board maintainers to
be sure. Other boards are straight forward, using just plain
"fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the
device ID.
The OMAP didn't have proper label names on its GPIO chips so I have fixed
this with a separate patch to the GPIO tree, see
commit 088413bc0b
"gpio: omap: Give unique labels to each GPIO bank/chip"
It seems the da9055 and da9211 has never got around to actually passing
any enable gpio into its platform data (not the in-tree code anyway) so we
can just decide to simply pass a descriptor instead.
The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named
"*_dummy_supply_device" while it is a very real device backed by a GPIO
line. There is nothing dummy about it at all, so I renamed it with the
infix *_regulator_* as part of this patch set.
For the patch hunk hitting arch/blackfin I would say I do not expect
testing, review or ACKs anymore so if it works, it works.
The hunk hitting the x86 BCM43xx driver is especially tricky as the number
comes out of SFI which is a mystery to me. I definately need someone to
look at this. (Hi Andy.)
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Check the x86 BCM stuff
Cc: Alexander Shiyan <shc_work@mail.ru> # i.MX boards user
Cc: Haojian Zhuang <haojian.zhuang@gmail.com> # MMP2 maintainer
Cc: Aaro Koskinen <aaro.koskinen@iki.fi> # OMAP1 maintainer
Cc: Tony Lindgren <tony@atomide.com> # OMAP1,2,3 maintainer
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> # EM-X270 maintainer
Cc: Robert Jarzmik <robert.jarzmik@free.fr> # EZX maintainer
Cc: Philipp Zabel <philipp.zabel@gmail.com> # Magician maintainer
Cc: Daniel Mack <zonque@gmail.com> # Raumfeld maintainer
Cc: Marc Zyngier <marc.zyngier@arm.com> # Zeus maintainer
Cc: Geert Uytterhoeven <geert+renesas@glider.be> # SuperH pinctrl/GPIO maintainer
Cc: Russell King <rmk+kernel@armlinux.org.uk> # SA1100
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The block layer had been setting the state to in-flight prior to updating
the timer. This is the wrong order since the timeout handler could observe
the in-flight state with the older timeout, believing the request had
expired when in fact it is just getting started.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As far as I can tell this function can't even be called any more, given
that ATA implements its own eh_strategy_handler with ata_scsi_error, which
never calls ->eh_timed_out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds support for the Atmel I2S controller embedded into
sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DT bindings for the new Atmel I2S controller embedded
inside sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
