The hdmitx_dig_cts clock signal is not a child of clk26m,
and the actual output of the PLL block is derived from
the tvdpll via a configurable PLL post-divider.
It is used as the PLL reference input to the HDMI PHY module.
Fixes: e986211827 ("clk: mediatek: Add MT2701 clock support")
Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Remove mr iova attribute because we don't want to pass up kernel pointers.
Fixes: fccec5b89a ("RDMA/nldev: provide detailed MR information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In clk_bulk_get(), if we fail to get the clock due to probe deferal, we
shouldn't print an error message. Just be silent in this case.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There are two USB3 host controllers on Hi3798CV200 SoC.
This commit adds missing clocks for them.
Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This commit fixes incorrect setting of reset bits for PCI/VGA and
PECI modules.
1. Reset bit for PCI/VGA is 8.
2. PECI reset bit is missing so added bit 10 as its reset bit.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Fixes: 15ed8ce5f8 ("clk: aspeed: Register gated clocks")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ast2500 has an additional reset register that contains resets not
present in the ast2400. This enables support for this register, and adds
the one reset line that is controlled by it.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Stratix10 clock driver is essential to system operation, so their
removal should never happen.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use platform driver APIs to map memory so that it will automatically free
the memory in case of errors.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
[sboyd@kernel.org: Return -ENOMEM error pointers, check for error
pointer at call site]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock for MPEG2 transport stream I/O and demux system (HSC) on
UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The ONFI spec clearly says that FAIL bit is only valid for PROGRAM,
ERASE and READ-with-on-die-ECC operations, and should be ignored
otherwise.
It seems that checking it after sending a SET_FEATURES is a bad idea
because a previous READ, PROGRAM or ERASE op may have failed, and
depending on the implementation, the FAIL bit is not cleared until a
new READ, PROGRAM or ERASE is started.
This leads to ->set_features() returning -EIO while it actually worked,
which can sometimes stop a batch of READ/PROGRAM ops.
Note that we only fix the ->exec_op() path here, because some drivers
are abusing the NAND_STATUS_FAIL flag in their ->waitfunc()
implementation to propagate other kind of errors, like
wait-ready-timeout or controller-related errors. Let's not try to fix
those drivers since they worked fine so far.
Fixes: 8878b126df ("mtd: nand: add ->exec_op() implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5d3UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgV6yB/9Xckx6aeyzem9wP6qFBX5v3hGit9inN+F9
mCf/0HlWpMs1TvB5HIraXf63Z8xRlqD+X+SQjKOjzyXPbFtPW7Ib++rpZAjod/GZ
THyEPnniW0KnxOqPRG0AkZZLpxUxpC2895VI1E+o8DMA6Pxt5cVqaxEktXdMFoqW
3zsJSGMKa8Cyih+K/ZZGyQTmnxEd8o4nkZS7tjx3YSINVKKoFPKg2kLABTqHr5Ru
kZZ/hhfSkrn+j4l3aZ+gVDeHDpjy5sJZ4w5O+xxuTcnDPhGgRcTwI3Qr6x24Bzqi
HPFjZuf7Utxl4LYXqKebdpQLYC9v4k7GMZKfFm00ur8pE6Iwt7ja
=+n7b
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/defconfig
Enablement of Rockchip-specific efuse, io-domain and typec drivers
as well as general cros-ec, hid, touchscreen bluetooth and wifi-drivers
on 64bit arm platforms.
* tag 'v4.18-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: enable rockchip efuse
arm64: defconfig: Enable bluetooth USB support
arm64: defconfig: Enable Marvell WiFi-Ex PCIe driver
arm64: defconfig: Enable Atmel Maxtouch driver
arm64: defconfig: Enable HID over I2C drivers
arm64: defconfig: Enable ChromeOS EC drivers for supported Chromebooks.
arm64: defconfig: Enable Rockchip io-domain driver
arm64: defconfig: Enable typec-phy and extcon-usbc-cros-ec for rk3399
Signed-off-by: Olof Johansson <olof@lixom.net>
usb3-phy otg-port and better ajustment for the cpll child clocks.
On the board side, all rk3399 got their typec phys enabled - which
is needed for better usb support, the sapphire board got some more
properties moved to the excavator baseboard where they really belong,
kevin got a fix to use a real devicetree compatible and puma-haikou
got its hdmi port enabled.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5cvgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgUvPCAC1lIIvNsPrnstlFrRcq8M+ijJaAvGQog3l
oFRdGpLENJc5rSrwCushK1b8attZxYE5kSd8ly4PK3LzM5w9vlXwSh3qOXzIfaX1
ClsJj7kXOJwVDsesvvWN9Dzc83D+552fCsNBru+ifTNqwo9JQ1neZhVzE2LsVFHh
mbXnNk0VlxtqXRT3TlIc1WZnVX9+4TQZMmXD9QRaFsHOqJ0fRaysn5SVKEYkbLDa
v9wLhrbjsbhnY01QLCguhKinMUs5lYLBn1PWkcAZdtf3Jctzlt0H5aFs13YCYdBA
4n8zGn21wrHlh3rvkn1ayysWESj6mc+Br1TFVMuqMCag7fId8Qsh
=fbhd
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
All iommus got their clocks added and rk3399 got support for its
usb3-phy otg-port and better ajustment for the cpll child clocks.
On the board side, all rk3399 got their typec phys enabled - which
is needed for better usb support, the sapphire board got some more
properties moved to the excavator baseboard where they really belong,
kevin got a fix to use a real devicetree compatible and puma-haikou
got its hdmi port enabled.
* tag 'v4.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable hdmi on rk3399-puma-haikou
arm64: dts: rockchip: use canonical compatible for touchpad/touchscreen on gru-kevin
arm64: dts: rockchip: add clocks in iommu nodes
arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
arm64: dts: rockchip: remove PCIe assigned-clocks in excavator baseboard
arm64: dts: rockchip: move rk3399-sapphire PCIe to excavator baseboard
arm64: dts: rockchip: assign clock rate for cpll child clocks on rk3399
arm64: dts: rockchip: enable typec-phy0 for rk3399-puma-haikou
arm64: dts: rockchip: enable typec-phy1 for rk3399-puma
arm64: dts: rockchip: enable typec-phy for rk3399-firefly
arm64: dts: rockchip: enable typec-phy for rk3399-sapphire
Signed-off-by: Olof Johansson <olof@lixom.net>
over multiple boards like default serial setting for rk3288-tinker,
output selection for the dp83867 on the phycore-som and the newly
added pwm-backlight delay properties for veyron boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5ccMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYd7B/4guy/cJFRSzZfhAl3XYeLlt7F4/RPJOUUk
Wj4PNDMP8hKnAj/2xcyypmf4Of/IvH5PwqywA4mgL7fzE2LkrQkRwpiHzRn1BnJA
2NoNVCRGRDYmMJFqelYs3bPfrGd/kYYaOjeNaD3mQa8cCAv+nZt3YS7ExiSrQeup
Yeg+V5wa0fqtcZneArgsBBD06Fatn2EksYsBtyTwTdf0AYJ+vT+DHEOubVXl4RNm
4eFm7fbplXmjBVnmTDINuRLusmqcDAu3tl/Q+hMqjJefdioyH6zdVPn38GqfhUBO
drg7tLbMQCdYNNCSrrJ5mzoVw4Zp8majfFRlbF69cpabhc6deHYS
=oFJx
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Fixed pin numbers for uart4 on rk3288, iommu clocks and small changes
over multiple boards like default serial setting for rk3288-tinker,
output selection for the dp83867 on the phycore-som and the newly
added pwm-backlight delay properties for veyron boards.
* tag 'v4.18-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: default serial for rk3288 Tinker Board
ARM: dts: rockchip: set PWM delay backlight settings for Minnie
ARM: dts: rockchip: set PWM delay backlight settings for Veyron
ARM: dts: rockchip: add clocks in iommu nodes
ARM: dts: rockchip: Add dp83867 CLK_OUT muxing on rk3288-phycore-som
ARM: dts: rockchip: fix uart4 pin-numbers for rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
be turned off but not on again.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlr5cGsQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgQ9HB/98xCkekkiDASNpu239dycR46mYPF04l8r+
g3+pg/DfRcXdzlFTvBHLZnqNA3XFnhYIGs+eIx1sQ6h7eLeTIPY5Mu6MpV6Aud7/
HkxiD8E+NnyqqENlPTrvOJeWbmLuBtLfXejdB8nJjEYgu1hDWtZ5VbfTX4U5JyFB
8JlcGhQNTzkZAohtOdpeEH2MMplB8bfS5Bkewh3MAf8gdbQpnNaSF2mn5snxVGhf
39LnyOUXeekf31xvH1lyBvV5BJkCDBt+LCra1CmBPdNrciX62pFEfvSe3jivj/kd
rKRQVMTQuAd7nnUpRVGMQXu+yBIBVjB4CGe3z3VlgLqW+ZDi7ogY
=/mue
-----END PGP SIGNATURE-----
Merge tag 'v4.18-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers
Fix for an issue introduced in 2016 where some powerdomains could only
be turned off but not on again.
* tag 'v4.18-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
soc: rockchip: power-domain: Fix wrong value when power up pd with writemask
Signed-off-by: Olof Johansson <olof@lixom.net>
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ep7k
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Second set of fixes for TI DaVinci.
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
* tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds PCIe, SATA, and HSC reset control support on various Uniphier
SoCs. PCIe reset control is added for Pro5, LD20, and PXs3 SoCs, SATA
reset control support is added on Pro4 and PXs3 SoCs. The previously
added PXs2 SATA reset control identifier is changed to the same value
for consistency. HSC (MPEG2 transport stream I/O and demux system) reset
controls are added for LD11 and LD20 SoCs.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCWvmu/hcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwKEqAP9K8vtILr1MDJjyK5TXL+gpnv5b
VC8214bEI5inlNDKmQEAplh+qfSI97QGBg06uV7kp2agOvc2yKd9EMUqcnq1WgM=
=rMPh
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.18' of git://git.pengutronix.de/pza/linux into next/drivers
Reset controller changes for v4.18
This adds PCIe, SATA, and HSC reset control support on various Uniphier
SoCs. PCIe reset control is added for Pro5, LD20, and PXs3 SoCs, SATA
reset control support is added on Pro4 and PXs3 SoCs. The previously
added PXs2 SATA reset control identifier is changed to the same value
for consistency. HSC (MPEG2 transport stream I/O and demux system) reset
controls are added for LD11 and LD20 SoCs.
* tag 'reset-for-4.18' of git://git.pengutronix.de/pza/linux:
reset: uniphier: add LD11/LD20 stream demux system reset control
reset: uniphier: add SATA reset control support and change SATA-PHY ID
reset: uniphier: add PCIe reset control support
reset: uniphier: fix USB clock line for LD20
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains all of the trivial review comments that were not
addressed as the series was already queued up for v4.17 and were not
critical to go as fixes.
They generally just improve code readability, fix kernel-docs, remove
unused/unnecessary code, follow standard function naming and simplifies
certain exit paths.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OzDu
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers
SCMI cleanups for v4.18
This contains all of the trivial review comments that were not
addressed as the series was already queued up for v4.17 and were not
critical to go as fixes.
They generally just improve code readability, fix kernel-docs, remove
unused/unnecessary code, follow standard function naming and simplifies
certain exit paths.
* tag 'scmi-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: simplify exit path by returning on error
firmware: arm_scmi: improve exit paths and code readability
firmware: arm_scmi: remove unnecessary bitmap_zero
firmware: arm_scmi: drop unused `con_priv` structure member
firmware: arm_scmi: rename scmi_xfer_{init,get,put}
firmware: arm_scmi: rename get_transition_latency and add_opps_to_device
firmware: arm_scmi: fix kernel-docs documentation
firmware: arm_scmi: improve code readability using bitfield accessor macros
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add the missing connections to the STM output port as all endpoint
connections must be bidirectional.
2. Replace all the custom OF graph endpoint node names with the standard
'endpoint'
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
4. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=D/b9
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
ARMv8 Juno/Vexpress updates/cleanups for v4.18
1. Add the missing connections to the STM output port as all endpoint
connections must be bidirectional.
2. Replace all the custom OF graph endpoint node names with the standard
'endpoint'
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
4. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
* tag 'juno-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno/rtsm: re-structure motherboard includes
arm64: dts: juno: replace '_' with '-' in node names
arm64: dts: juno: Fix "debounce-interval" property misspelling
arm64: dts: juno: fix OF graph endpoint node names
arm64: dts: juno: fix missing Coresight STM graph connection
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
2. Use of standard GPIO controller bindings for few sysreg components
like LED, MMC Write Protect/Card Detect and Flash Write Protect
to fix some of the new DTC warnings
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=X3Vc
-----END PGP SIGNATURE-----
Merge tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
ARMv7 Vexpress updates/cleanups for v4.18
1. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
2. Use of standard GPIO controller bindings for few sysreg components
like LED, MMC Write Protect/Card Detect and Flash Write Protect
to fix some of the new DTC warnings
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
* tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: replace '_' with '-' in node names
ARM: dts: vexpress: use standard gpio bindings for sys_{led,mci,flash}
ARM: dts: vexpress: Restructure motherboard includes
Signed-off-by: Olof Johansson <olof@lixom.net>
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Alexandre Belloni says:
====================
Microsemi Ocelot Ethernet switch support
This series adds initial support for the Microsemi Ethernet switch
present on Ocelot SoCs.
This only has bridging (and STP) support for now and it uses the
switchdev framework.
Coming features are VLAN filtering, link aggregation, IGMP snooping.
The switch can also be connected to an external CPU using PCIe.
Also, support for integration on other SoCs will be submitted.
The ocelot dts changes are here for reference and should probably go
through the MIPS tree once the bindings are accepted.
Changes in v3:
- Collected Reviewed-by
* Switchdev driver:
- Fixed two issues reported by kbuild
- Modified ethtool statistics to support different layoiut on different chips and take care of counter overflow
Changes in v2:
- Dropped Microsemi Ocelot PHY support
* MIIM driver:
- Documented interrupts bindings
- Moved the driver to drivers/net/phy/
- Removed unused mutex
- Removed MDIO bus scanning
* Switchdev driver:
- Changed compatible to mscc,vsc7514-switch
- Removed unused header inclusion
- Factorized MAC table selection in ocelot_mact_select()
- Disable the port in ocelot_port_stop()
- Fixed the smatch endianness warnings
- int to unsinged int where necessary
- Removed VID handling for the FDB it has been reworked anyway and will be
submitted with VLAN support
- Fixed up unused cases in ocelot_port_attr_set()
- Added a loop to register all the IO register spaces
- the ports are now in an ethernet-ports node
I've tried switching to NAPI but this is not working well, mainly because the
only way to disable interrupts is to actually mask them in the interrupt
controller (it is not possible to tell the switch to stop generating
interrupts).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add myself as a maintainer for the Microsemi Ethernet switches.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for Microsemi Ocelot Ethernet switch support.
This makes two modules:
mscc_ocelot_common handles all the common features that doesn't depend on
how the switch is integrated in the SoC. Currently, it handles offloading
bridging to the hardware. ocelot_io.c handles register accesses. This is
unfortunately needed because the register layout is packed and then depends
on the number of ports available on the switch. The register definition
files are automatically generated.
ocelot_board handles the switch integration on the SoC and on the board.
Frame injection and extraction to/from the CPU port is currently done using
register accesses which is quite slow. DMA is possible but the port is not
able to absorb the whole switch bandwidth.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT bindings for the Ethernet switch found on Microsemi Ocelot platforms.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a driver for the Microsemi MII Management controller (MIIM) found on
Microsemi SoCs.
On Ocelot, there are two controllers, one is connected to the internal
PHYs, the other one can communicate with external PHYs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DT bindings for the Microsemi MII Management Controller found on Microsemi
SoCs
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
- use of_device_get_match_data in pmic wrapper and scpsys
-----BEGIN PGP SIGNATURE-----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=4KAA
-----END PGP SIGNATURE-----
Merge tag 'v4.17-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers
- use timeout helpers for scpsys and infracfg drivers
- use of_device_get_match_data in pmic wrapper and scpsys
* tag 'v4.17-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: remove unneeded semicolon
soc: mediatek: add a fixed wait for SRAM stable
soc: mediatek: introduce a CAPS flag for scp_domain_data
soc: mediatek: reuse regmap_read_poll_timeout helpers
regmap: include <linux/ktime.h> from include/linux/regmap.h
soc: mediatek: reuse read[l,x]_poll_timeout helpers
soc: mediatek: use of_device_get_match_data()
Signed-off-by: Olof Johansson <olof@lixom.net>
We allocate some memory which is neither used, nor referenced by anything.
So axe it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Nobody is using it anymore, and it's been abandoned. Since David
is fine with removing it, kill it.
Suggested-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
During this merge window, we added support for addition RDMA netlink
operations. Unfortunately, we added the items in the middle of our uapi
enum. Fix that before final release.
Fixes: da5c850782 ("RDMA/nldev: add driver-specific resource
tracking")
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow querying of the firmware revision of the device
example:
4.10
Tested on ZII RDU2 platform and on Intel x86_64 PC.
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Change hardcoded string "input_set_capability" in pr_err() function call,
replace it with "%s" __func__ instead.
Signed-off-by: Nick Simonov <nicksimonovv@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Starting from the commit 0d0443288f the new function has been
introduced which takes struct task_struct as a parameter. Though,
compiler doesn't know where to get information about it at this stage.
Add missed declaration of struct task_struct to satisfy compiler.
Fixes: 0d0443288f ("string_helpers: add kstrdup_quotable_cmdline")
Cc: Kees Cook <keescook@chromium.org>
Cc: James Morris <james.l.morris@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
this patch also effect the amdgpu and etnaviv drivers which
use the function drm_sched_entity_init
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is dual licensed under GPL-2.0 or MIT.
Signed-off-by: Dirk Hohndel (VMware) <dirk@hohndel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Quite useful to know.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is meaningless anyway.
v2: remove unused variable (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change prepares for a workaround in amdkfd for a GFX9 HW bug. It
requires the control stack memory of compute queues, which is allocated
from the second page of MQD gart BOs, to have mtype NC, rather than
the default UC.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Functionality to message smc to enable pwe after gpu suspense.
It is used in case when display resumes from S3 and wants to start
audio driver by enabling pwe.
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is in continuation to the
"843e3c7 drm/amd/display: defer modeset check in dm_update_planes_state"
where we started to eliminate the dependency on
DRM_MODE_ATOMIC_ALLOW_MODESET to be set by the user space,
which as such is not mandatory.
After deferring, this patch eliminates the dependency on the flag
for overlay planes.
This has to be done in stages as its a pretty complex and requires thorough
testing before we free primary planes as well from dependency on modeset
flag.
V2: Simplified the plane type check.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix crash in trace.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These got moved to the new df module so no longer
used in this file.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
