Each iteration of for_each_child_of_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In its_vpe_init, when its_alloc_vpe_table fails, we should free
vpt_page allocated just before, instead of vpe->vpt_page.
Let's fix it.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When fall-through warnings was enabled by default the following warning
was starting to show up:
In file included from ../arch/arm64/include/asm/cputype.h:132,
from ../arch/arm64/include/asm/cache.h:8,
from ../include/linux/cache.h:6,
from ../include/linux/printk.h:9,
from ../include/linux/kernel.h:15,
from ../include/linux/list.h:9,
from ../include/linux/kobject.h:19,
from ../include/linux/of.h:17,
from ../include/linux/irqdomain.h:35,
from ../include/linux/acpi.h:13,
from ../drivers/irqchip/irq-gic-v3.c:9:
../drivers/irqchip/irq-gic-v3.c: In function ‘gic_cpu_sys_reg_init’:
../arch/arm64/include/asm/sysreg.h:853:2: warning: this statement may fall
through [-Wimplicit-fallthrough=]
asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); \
^~~
../arch/arm64/include/asm/arch_gicv3.h:20:29: note: in expansion of macro ‘write_sysreg_s’
#define write_gicreg(v, r) write_sysreg_s(v, SYS_ ## r)
^~~~~~~~~~~~~~
../drivers/irqchip/irq-gic-v3.c:773:4: note: in expansion of macro ‘write_gicreg’
write_gicreg(0, ICC_AP0R2_EL1);
^~~~~~~~~~~~
../drivers/irqchip/irq-gic-v3.c:774:3: note: here
case 6:
^~~~
Rework so that the compiler doesn't warn about fall-through.
Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
In build_adc_controls(), there is an if statement on line 773 to check
whether ak->adc_info is NULL:
if (! ak->adc_info ||
! ak->adc_info[mixer_ch].switch_name)
When ak->adc_info is NULL, it is used on line 792:
knew.name = ak->adc_info[mixer_ch].selector_name;
Thus, a possible null-pointer dereference may occur.
To fix this bug, referring to lines 773 and 774, ak->adc_info
and ak->adc_info[mixer_ch].selector_name are checked before being used.
This bug is found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The last fallback of CORB/RIRB communication error recovery is to turn
on the single command mode, and this last resort usually means that
something is really screwed up. Instead of a normal dev_err(), show
the error more clearly with dev_WARN() with the caller stack trace.
Also, show the bus-reset fallback also as an error, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Implement custom snd_pcm_hw_rule to filter the available formats for the
second stream to make it symmetric and allow only formats which require
the same amount of bits on the bus as the running stream.
A simple constraint is not working correctly because for example:
the first stream is started with S24_LE
If we place 24 as constraint for the SAMPLE_BITS then the second stream
can not use S24_LE as it is physically 32bits.
If we would place 32 as constraint (physical width) then S32_LE would have
been allowed, but S24_3LE is not.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.
Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.
With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.
Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit db51707b9c.
Revert "ASoC: rockchip: i2s: Support mono capture"
Previous discussion in
https://patchwork.kernel.org/patch/10147153/
explains the issue of the patch.
While device is configured as 1-ch, hardware is still
generating a 2-ch stream.
When user space reads the data and assumes it is a 1-ch stream,
the rate will be slower by 2x.
Revert the change so 1-ch is not supported.
User space can selectively take one channel data out of two channel
if 1-ch is preferred.
Currently, both channels record identical data.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix some typo to have the filaname given in a comment match the real name
of the file.
Some 'acpi' have erroneously been written 'apci'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
When running McASP as master capture alone will not record any audio unless
a parallel playback stream is running. As soon as the playback stops the
captured data is going to be silent again.
In McASP master mode we need to set the PDIR for the clock pins and fix
the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above
AMUTE.
This went unnoticed as most of the boards uses McASP as slave and neither
of these issues are visible (audible) in those setups.
Fixes: ca3d943334 ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Redefine pr_fmt so that the module name is prefixed to every
log message produced by the ccp-crypto module
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The directory tools/crypto and the only file under it never gets
built anywhere. This program should instead be incorporated into
one of the existing user-space projects, crconf or libkcapi.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support to load Asymmetric crypto firmware on
AE cores of CNN55XX device. Firmware is stored on UCD block 2
and all available AE cores are tagged to group 0.
Signed-off-by: Phani Kiran Hemadri <phemadri@marvell.com>
Reviewed-by: Srikanth Jampala <jsrikanth@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CCP driver is able to act as a DMA engine. Add a module parameter that
allows this feature to be enabled/disabled.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide the ability to constrain the total number of enabled devices in
the system. Once max_devs devices have been configured, subsequently
probed devices are ignored.
The max_devs parameter may be zero, in which case all CCPs are disabled.
PSPs are always enabled and active.
Disabling the CCPs also disables DMA and RNG registration.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a module parameter to limit the number of queues per CCP. The default
value (nqueues=0) is to set up every available queue on each device.
The count of queues starts from the first one found on the device (which
varies based on the device ID).
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a config option to exclude DebugFS support in the CCP driver.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, NETLINK_CRYPTO works only in the init network namespace. It
doesn't make much sense to cut it out of the other network namespaces,
so do the minor plumbing work necessary to make it work in any network
namespace. Code inspired by net/core/sock_diag.c.
Tested using kcapi-dgst from libkcapi [1]:
Before:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: NETLINK_CRYPTO: cannot obtain cipher information for hmac(sha512) (is required crypto_user.c patch missing? see documentation)
0
After:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
32
[1] https://github.com/smuellerDD/libkcapi
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch recognises the fact that the hardware cannot ever process more
than 2,199,023,386,111 bytes of hash or HMAC payload, so there is no point
in maintaining 128 bit wide byte counters, 64 bits is more than sufficient
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for the following AEAD ciphersuites:
- authenc(hmac(sha1),rfc3686(ctr(aes)))
- authenc(hmac(sha224),rfc3686(ctr(aes)))
- authenc(hmac(sha256),rfc3686(ctr(aes)))
- authenc(hmac(sha384),rfc3686(ctr(aes)))
- authenc(hmac(sha512),rfc3686(ctr(aes)))
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We need to drop everything we remove from the tree, whether
mnt_has_parent() is true or not. Usually the bug manifests as a slow
memory leak (leaked struct mount for initramfs); it becomes much more
visible in mount_subtree() users, such as btrfs. There we leak
a struct mount for btrfs superblock being mounted, which prevents
fs shutdown on subsequent umount.
Fixes: 56cbb429d9 ("switch the remnants of releasing the mountpoint away from fs_pin")
Reported-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on
crypto controlled devices") has introduced a change which allows
4addr operation on crypto controlled devices (ex: ath10k). This
change has inadvertently impacted the interface combinations logic
on such devices.
General rule is that software interfaces like AP/VLAN should not be
listed under supported interface combinations and should not be
considered during validation of these combinations; because of the
aforementioned change, AP/VLAN interfaces(if present) will be checked
against interfaces supported by the device and blocks valid interface
combinations.
Consider a case where an AP and AP/VLAN are up and running; when a
second AP device is brought up on the same physical device, this AP
will be checked against the AP/VLAN interface (which will not be
part of supported interface combinations of the device) and blocks
second AP to come up.
Add a new API cfg80211_iftype_allowed() to fix the problem, this
API works for all devices with/without SW crypto control.
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Fixes: 33d915d9e8 ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices")
Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This seems to cause guest and host memory corruption.
Disable for now until we get a better handle on that.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port
Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com
This switches the kernel to parse the Redboot partitions
in the SL93512r and the NAS4220B properly using the
right compatible string instead of using hard-coded
partitions.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SL93512r board has its pin muxing set up for the wrong
ASIC: SL3516 instead of SL3512 that it is using. Fix it
up and reference the right GPIO for the WPS button.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Right now struct ieee80211_tx_rate cannot hold HE rates. Lets use
struct ieee80211_tx_status instead. This will also make the code
future-proof for when we have EHT.
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190714154419.11854-2-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
I will not be able to continue with my maintainership responsibilities
going forward, so remove myself as the maintainer.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Since commit eec4844fae ("proc/sysctl: add shared variables for range
check") special shared variables are available for sysctl range check.
Reuse them for /proc/sys/vm/allocate_pgste proc handler.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb158 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 96b14536d9 ("virtio-ccw: virtio-ccw adapter interrupt support.")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
On s390 ZONE_DMA is up to 2G, i.e. ARCH_ZONE_DMA_BITS should be 31 bits.
The current value is 24 and makes __dma_direct_alloc_pages() take a
wrong turn first (but __dma_direct_alloc_pages() recovers then).
Let's correct ARCH_ZONE_DMA_BITS value and avoid wrong turns.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Petr Tesarik <ptesarik@suse.cz>
Fixes: c61e963734 ("dma-direct: add support for allocation from ZONE_DMA and ZONE_DMA32")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
If we just read jiffies over and over again, a non-transmitting
entry may have a newer timestamp than the transmitting one,
leading to possible confusion on expiry. Give them all the same
timestamp when creating them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190703133823.10530-3-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't parse the multi-BSSID structures if we couldn't even create
their transmitting BSS, this would confuse all of our tracking.
This also means that non_tx_data->tx_bss will never be NULL, so
we can clean up a little bit.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190703133823.10530-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211_inform_single_bss_frame_data() doesn't need the
non_tx_data data argument since it's always NULL.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190703133823.10530-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190703070142.GA29993@kroah.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extended Key ID allows A-MPDU sessions while rekeying as long as each
A-MPDU aggregates only MPDUs with one keyid together.
Drivers able to segregate MPDUs accordingly can tell mac80211 to not
stop A-MPDU sessions when rekeying by setting the new flag
IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20190629195015.19680-3-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1) Drop IEEE80211_HW_EXT_KEY_ID_NATIVE and let drivers directly set
the NL80211_EXT_FEATURE_EXT_KEY_ID flag.
2) Drop IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT and simply assume all
drivers are unable to handle A-MPDU key borders.
The new Extended Key ID API now requires all mac80211 drivers to set
NL80211_EXT_FEATURE_EXT_KEY_ID when they implement set_key() and can
handle Extended Key ID. For drivers not providing set_key() mac80211
itself enables Extended Key ID support, using the internal SW crypto
services.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20190629195015.19680-2-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prepare hwsim Extended Key ID support for a mac80211 API change.
The mac80211 flag IEEE80211_HW_EXT_KEY_ID_NATIVE is being replaced by
NL80211_EXT_FEATURE_EXT_KEY_ID which only must be set by drivers when
they support HW crypto.
This reverts commit cfe7007a9b ("mac80211_hwsim: Extended Key ID support").
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20190629195015.19680-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now Spreadtrum ADI controller supplies multiple master accessing channel
to support multiple subsystems accessing, instead of using a hardware
spinlock to synchronize between the multiple subsystems.
To keep backward compatibility, we should change the hardware spinlock
to be optional. Moreover change to use of_hwspin_lock_get_id() function
which return -ENOENT error number to indicate no hwlock support.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/2abe7dcf210e4197f8c5ece7fc6d6cc1eda8c655.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the system was rebooted by watchdog, now we did not save the watchdog
reset mode which will make system enter a incorrect mode after rebooting.
Thus we should set the watchdog reset mode as default when opening the
watchdog configuration, that means if the system was rebooted by other
reason through the restart_handler(), then we will clear the default
watchdog reset mode to save the correct reset mode.
Signed-off-by: Sherry Zong <sherry.zong@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/1563f3de43c6c2262d597a25d6138b5de61ea23d.1564125131.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
