This giant switch has tendrils all other the struct and does not fit
in with the rest of the driver bring up and control in i915_drv.c. Push
it to one side so that it can grow in peace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807142041.32699-1-chris@chris-wilson.co.uk
In platforms/devices which have CONFIG_OF turned on but don't have a
populated DT, the calls to device_links_supplier_sync_state_pause() and
device_links_supplier_sync_state_resume() can get mismatched. This will
cause a warning during boot. Fix the warning by making sure the calls are
matched even in that case.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190807020559.74458-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_link_is_valid() can be static since it's not used anywhere else.
of_link_property() return type should have been int instead of bool.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190806192654.138605-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1a058c3376.
This interface is still in too much flux. Revert until
it's sorted out.
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ptrace trace SVE flags are prefixed with SVE_PT_*. Update the
comment accordingly.
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This change prints the hexadecimal EC value in mem_abort_decode(),
which makes it easier to lookup the corresponding EC in
the ARM Architecture Reference Manual.
The commit 1f9b8936f3 ("arm64: Decode information from ESR upon mem
faults") prints useful information when memory abort occurs. It would
be easier to lookup "0x25" instead of "DABT" in the document. Then we
can check the corresponding ISS.
For example:
Current info Document
EC Exception class
"CP15 MCR/MRC" 0x3 "MCR or MRC access to CP15a..."
"ASIMD" 0x7 "Access to SIMD or floating-point..."
"DABT (current EL)" 0x25 "Data Abort taken without..."
...
Before:
Unable to handle kernel paging request at virtual address 000000000000c000
Mem abort info:
ESR = 0x96000046
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000046
CM = 0, WnR = 1
After:
Unable to handle kernel paging request at virtual address 000000000000c000
Mem abort info:
ESR = 0x96000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000046
CM = 0, WnR = 1
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: James Morse <james.morse@arm.com>
Acked-by: Mark Rutland <Mark.rutland@arm.com>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Will Deacon <will@kernel.org>
The commit d5370f7548 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,
In file included from ./arch/arm64/include/asm/cache.h:8,
from ./include/linux/cache.h:6,
from ./include/linux/printk.h:9,
from ./include/linux/kernel.h:15,
from ./include/linux/cpumask.h:10,
from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max); \
^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
^~~~~~~~~~~~~~~~~~~~~~~
Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Commit 5cf896fb6b ("arm64: Add support for relocating the kernel with
RELR relocations") introduced CONFIG_TOOLS_SUPPORT_RELR, which checks
for RELR support in the toolchain as part of the kernel configuration.
During this procedure, "$(NM)" is invoked to see if it supports the new
relocation format, however PowerPC conditionally overrides this variable
in the architecture Makefile in order to pass '--synthetic' when
targetting PPC64.
This conditional override causes Kconfig to recurse forever, since
CONFIG_TOOLS_SUPPORT_RELR cannot be determined without $(NM) being
defined, but that in turn depends on CONFIG_PPC64:
$ make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
scripts/kconfig/conf --syncconfig Kconfig
[...]
In this particular case, it looks like PowerPC may be able to pass
'--synthetic' unconditionally to nm or even drop it altogether. While
that is being resolved, let's just bodge the RELR check by picking up
$(NM) directly from the environment in whatever state it happens to be
in.
Cc: Peter Collingbourne <pcc@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Will Deacon <will@kernel.org>
Normally the range->len is set to default value (U64_MAX), but when it's
not default value, we should check if the range overflows.
And if it overflows, return -EINVAL before doing anything.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
// <smpl>
@@
expression ret;
struct platform_device *E;
@@
ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);
if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>
While we're here, remove braces on if statements that only have one
statement (manually).
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In the 5.3 merge window, commit 7c7e301406 ("btrfs: sysfs: Replace
default_attrs in ktypes with groups"), we started using the member
"defaults_groups" for the kobject type "btrfs_raid_ktype". That leads
to a series of warnings when running some test cases of fstests, such
as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those
warnings are like the following:
[116648.059212] kernfs: can not remove 'total_bytes', no directory
[116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000
[116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001
[116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.077143] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.077852] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.080585] Call Trace:
[116648.081262] remove_files+0x31/0x70
[116648.081929] sysfs_remove_group+0x38/0x80
[116648.082596] sysfs_remove_groups+0x34/0x70
[116648.083258] kobject_del+0x20/0x60
[116648.083933] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.084608] close_ctree+0x19a/0x380 [btrfs]
[116648.085278] generic_shutdown_super+0x6c/0x110
[116648.085951] kill_anon_super+0xe/0x30
[116648.086621] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.087289] deactivate_locked_super+0x3a/0x70
[116648.087956] cleanup_mnt+0xb4/0x160
[116648.088620] task_work_run+0x7e/0xc0
[116648.089285] exit_to_usermode_loop+0xfa/0x100
[116648.089933] do_syscall_64+0x1cb/0x220
[116648.090567] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.091197] RIP: 0033:0x7f9cdc073b37
(...)
[116648.100046] ---[ end trace 22e24db328ccadf8 ]---
[116648.100618] ------------[ cut here ]------------
[116648.101175] kernfs: can not remove 'used_bytes', no directory
[116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G W 5.3.0-rc3-btrfs-next-54 #1
(...)
[116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
(...)
[116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
[116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000
[116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
[116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001
[116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
[116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
[116648.113268] FS: 00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
[116648.113939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
[116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[116648.116649] Call Trace:
[116648.117326] remove_files+0x31/0x70
[116648.117997] sysfs_remove_group+0x38/0x80
[116648.118671] sysfs_remove_groups+0x34/0x70
[116648.119342] kobject_del+0x20/0x60
[116648.120022] btrfs_free_block_groups+0x405/0x430 [btrfs]
[116648.120707] close_ctree+0x19a/0x380 [btrfs]
[116648.121396] generic_shutdown_super+0x6c/0x110
[116648.122057] kill_anon_super+0xe/0x30
[116648.122702] btrfs_kill_super+0x12/0xa0 [btrfs]
[116648.123335] deactivate_locked_super+0x3a/0x70
[116648.123961] cleanup_mnt+0xb4/0x160
[116648.124586] task_work_run+0x7e/0xc0
[116648.125210] exit_to_usermode_loop+0xfa/0x100
[116648.125830] do_syscall_64+0x1cb/0x220
[116648.126463] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[116648.127080] RIP: 0033:0x7f9cdc073b37
(...)
[116648.135923] ---[ end trace 22e24db328ccadf9 ]---
These happen because, during the unmount path, we call kobject_del() for
raid kobjects that are not fully initialized, meaning that we set their
ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set
their parent kobject, which is done through btrfs_add_raid_kobjects().
We have this split raid kobject setup since commit 75cb379d26
("btrfs: defer adding raid type kobject until after chunk relocation") in
order to avoid triggering reclaim during contextes where we can not
(either we are holding a transaction handle or some lock required by
the transaction commit path), so that we do the calls to kobject_add(),
which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects()
in contextes where it is safe to trigger reclaim. That change expected
that a new raid kobject can only be created either when mounting the
filesystem or after raid profile conversion through the relocation path.
However, we can have new raid kobject created in other two cases at least:
1) During device replace (or scrub) after adding a device a to the
filesystem. The replace procedure (and scrub) do calls to
btrfs_inc_block_group_ro() which can allocate a new block group
with a new raid profile (because we now have more devices). This
can be triggered by test cases btrfs/027 and btrfs/176.
2) During a degraded mount trough any write path. This can be triggered
by test case btrfs/124.
Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only
makes things more complex and fragile, can also introduce deadlocks with
reclaim the following way:
1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or
anywhere in the replace/scrub path will cause a deadlock with reclaim
because if reclaim happens and a transaction commit is triggered,
the transaction commit path will block at btrfs_scrub_pause().
2) During degraded mounts it is essentially impossible to figure out where
to add extra calls to btrfs_add_raid_kobjects(), because allocation of
a block group with a new raid profile can happen anywhere, which means
we can't safely figure out which contextes are safe for reclaim, as
we can either hold a transaction handle or some lock needed by the
transaction commit path.
So it is too complex and error prone to have this split setup of raid
kobjects. So fix the issue by consolidating the setup of the kobjects in a
single place, at link_block_group(), and setup a nofs context there in
order to prevent reclaim being triggered by the memory allocations done
through the call chain of kobject_add().
Besides fixing the sysfs warnings during kobject_del(), this also ensures
the sysfs directories for the new raid profiles end up created and visible
to users (a bug that existed before the 5.3 commit 7c7e301406
("btrfs: sysfs: Replace default_attrs in ktypes with groups")).
Fixes: 75cb379d26 ("btrfs: defer adding raid type kobject until after chunk relocation")
Fixes: 7c7e301406 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace hard coded constants with self-explanatory names, i.e.
use NSEC_PER_USEC for debounce calculus.
While here, add a unit suffix to debounce period constant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We have some data structures duplicated across the drivers.
Let's deduplicate them by using ones that being provided by
pinctrl-intel.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the drivers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since some of the GPIO controllers use different Interrupt Status offset,
it make sense to provide it explicitly in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is more generic and simpler validation just against the nregs.
Using it allows to drop customization from the intel_get_padcfg().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
For forklifted frankenkernels, the reported kernel version has no
bearing on the actual driver version. Include our own driver date that
is updated every time we tag drm-intel-next.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807113827.28127-1-chris@chris-wilson.co.uk
There were several places which check for NULL when they should have
been checking for IS_ERR().
Fixes: d8af05ff38 ("drm/i915: Allow sharing the idle-barrier from other kernel requests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807122832.GA10517@mwanda
During engine setup, we may find that some engines are fused off causing
a misalignment between internal names and the instances seen by users,
e.g. (I915_ENGINE_CLASS_VIDEO_DECODE, 1) may be vcs2 in hardware.
Normally this is invisible to the user, but a few debug interfaces (and
our own internal tracing) use the original HW name not the name the user
would expect as formed from their class:instance tuple. Replace our
internal name with the uabi name for consistency with, for example, error
states.
v2: Keep the pretty printing of class name in the selftest
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111311
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807110431.8130-1-chris@chris-wilson.co.uk
SAI module on imx7ulp/imx8m features 2 new registers (VERID and PARAM)
at the beginning of register address space.
On imx7ulp FIFOs can held up to 16 x 32 bit samples.
On imx8mq FIFOs can held up to 128 x 32 bit samples.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-5-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
New IP version introduces Version ID and Parameter registers
and optionally added Timestamp feature.
VERID and PARAM registers are placed at the top of registers
address space and some registers are shifted according to
the following table:
Tx/Rx data registers and Tx/Rx FIFO registers keep their
addresses, all other registers are shifted by 8.
SAI Memory map is described in chapter 13.10.4.1.1 I2S Memory map
of the Reference Manual [1].
In order to make as less changes as possible we attach an offset
to each register offset to each changed register definition. The
offset is read from each board private data.
[1]https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMX8MDQLQRM.pdf?__gda__=1563728701_38bea7f0f726472cc675cb141b91bec7&fileExt=.pdf
Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
[initial coding in the NXP internal tree]
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
[bugfixing and cleanups]
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
[adapted to linux-next]
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-4-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tx channel enable (TCE) / Rx channel enable (RCE) bits
enable corresponding data channel for Tx/Rx operation.
Because SAI supports up the 8 channels TCE/RCE occupy
up the 8 bits inside TCR3/RCR3 registers we need to extend
the mask to reflect this.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-3-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SAI IP supports up to 8 data lines. The configuration of
supported number of data lines is decided at SoC integration
time.
This patch adds definitions for all related data TX/RX registers:
* TDR0..7, Transmit data register
* TFR0..7, Transmit FIFO register
* RDR0..7, Receive data register
* RFR0..7, Receive FIFO register
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190806151214.6783-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
struct ipc_message contains fields: header, tx_data and tx_size which
represent TX i.e. request while RX is represented by rx_data and rx_size
with reply's header equivalent missing.
Reply header may contain some vital information including, but not
limited to, received payload size. Some IPCs have entire payload found
within RX header instead. Content and value of said header is context
dependent and may vary between firmware versions and target platform.
Current model does not allow such IPCs to function at all.
Rather than appending yet another parameter to an already long list of
such for sst_ipc_tx_message_XXXs, declare message container in form of
struct sst_ipc_message and add them to parent's ipc_message declaration.
Align haswell, baytrail and skylake with updated request-reply model and
modify their reply processing functions to save RX header within message
container. Despite the range of changes, status quo is achieved.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190723144341.21339-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dapm_new_controls() registers controls by using
for(... i < num; ...). It means if widget was NULL, num should be zero.
Thus, we don't need to check about widget pointer.
This patch also cares missing return value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ftmdahow.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_rtdcom_add() is using both "rtdcom" and "new_rtdcom" as
variable name, but these are not used at same time.
Let's reuse rtdcom.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h86tahp2.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It doesn't removes list during loop at snd_soc_find_dai_link().
We don't need to use _safe loop.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87imr9ahp9.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_add_dai_link() might return error, we need to check it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1bpahpd.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-core has many for_each_xxx, but it is a little bit
difficult to know which list is relead to which for_each_xxx.
This patch adds missing comment for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfw5ahpj.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more safety code, let's set NULL to component->debugfs_root
when it was cleanuped.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87muglahq0.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Booting a large arm64 server (HiSi D05) leads to the following
shouting at boot time:
[ 20.722132] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.730851] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.739560] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.748267] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.756975] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.765683] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
[ 20.774391] debugfs: File 'irqchip@(____ptrval____)-3' in directory 'domains' already present!
and many more... Evidently, we expect something a bit more informative
than ____ptrval____, and certainly we want all of our domains, not just
the first one.
For that, turn the %p used to generate the fwnode name into something
that won't be repainted (%pa). Given that we've now fixed all users to
pass a pointer to a PA, it will actually do the right thing.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
To allocate its fwnode that is then used to allocate an irqdomain,
the driver uses irq_domain_alloc_fwnode(), passing it a VA as an
identifier. This is a rather bad idea, as this address ends up
published in debugfs (and we want to move away from VAs there
anyway).
Instead, let's allocate a named fwnode by using the device GUID as
an identifier. It is allegedly unique, and can be traced back to
the original device.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Do not expose the base VA (it appears in debugfs). Instead,
record the PA, which at least can be used to precisely identify
the associated irqchip and domain.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Do not expose the base VA (it appears in debugfs). Instead,
record the PA, which at least can be used to precisely identify
the associated irqchip and domain.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Do not expose the frame's VA (it appears in debugfs). Instead,
record the PA, which at least can be used to precisely identify
the associated irqchip and domain.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
