A dm-raid array with devices larger than 4GB won't assemble on
a 32 bit host since _check_data_dev_sectors() was added in 4.16.
This is because to_sector() treats its argument as an "unsigned long"
which is 32bits (4GB) on a 32bit host. Using "unsigned long long"
is more correct.
Kernels as early as 4.2 can have other problems due to to_sector()
being used on the size of a device.
Fixes: 0cf4503174 ("dm raid: add support for the MD RAID0 personality")
cc: stable@vger.kernel.org (v4.2+)
Reported-and-tested-by: Guillaume Perréal <gperreal@free.fr>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
(GINVT) instructions, allowing for more efficient TLB maintenance when
running on a CPU such as the I6500 that supports these.
- Enable huge page support for MIPS64r6.
- Optimize post-DMA cache sync by removing that code entirely for kernel
configurations in which we know it won't be needed.
- The number of pages allocated for interrupt stacks is now calculated
correctly, where before we would wastefully allocate too much memory
in some configurations.
- The ath79 platform migrates to devicetree.
- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
- The ingenic/jz4740 platform gains support for appended devicetrees.
- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
cleanups as do various pieces of core architecture code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXH3BQxUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN1+4wD+Oh4JTfZN/NEOQMlrSkXxjEHqjX3u
1Y6CiiPCs+q2UnYBANb+ic+ZH5MnvJxxmcvlYI2q3rIh4b8TDriip4KMUTUP
=Sw9X
-----END PGP SIGNATURE-----
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
(GINVT) instructions, allowing for more efficient TLB maintenance
when running on a CPU such as the I6500 that supports these.
- Enable huge page support for MIPS64r6.
- Optimize post-DMA cache sync by removing that code entirely for
kernel configurations in which we know it won't be needed.
- The number of pages allocated for interrupt stacks is now calculated
correctly, where before we would wastefully allocate too much memory
in some configurations.
- The ath79 platform migrates to devicetree.
- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
- The ingenic/jz4740 platform gains support for appended devicetrees.
- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
cleanups as do various pieces of core architecture code.
* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
MIPS: lantiq: Remove separate GPHY Firmware loader
MIPS: ingenic: Add support for appended devicetree
MIPS: SGI-IP27: rework HUB interrupts
MIPS: SGI-IP27: do boot CPU init later
MIPS: SGI-IP27: do xtalk scanning later
MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
MIPS: SGI-IP27: clean up bridge access and header files
MIPS: SGI-IP27: get rid of volatile and hubreg_t
MIPS: irq: Allocate accurate order pages for irq stack
MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
MIPS: eBPF: Remove REG_32BIT_ZERO_EX
MIPS: eBPF: Always return sign extended 32b values
MIPS: CM: Fix indentation
MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
MIPS: OCTEON: program rx/tx-delay always from DT
MIPS: OCTEON: delete board-specific link status
MIPS: OCTEON: don't lie about interface type of CN3005 board
MIPS: OCTEON: warn if deprecated link status is being used
MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
MIPS: Delete unused flush_cache_sigtramp()
...
- A copy of Arnds compat wrapper generation series
- Pass information about the KVM guest to the host in form the control
program code and the control program version code
- Map IOV resources to support PCI physical functions on s390
- Add vector load and store alignment hints to improve performance
- Use the "jdd" constraint with gcc 9 to make jump labels working again
- Remove amode workaround for old z/VM releases from the DCSS code
- Add support for in-kernel performance measurements using the
CPU measurement counter facility
- Introduce a new PMU device cpum_cf_diag to capture counters and
store thenn as event raw data.
- Bug fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcfh4QAAoJEDjwexyKj9rgXVAH/RzVbi3vznldujSNfCFTZKPu
EmFFAZIfbhifW3szfylyOJL52pFhxjcWzY0hkFEkbs2t90sn8l1BNkDscYZtfNHC
XvN3N9LsHyxOeyxvQuWLSio58qm+Lr1L0UrIhbMvqyAVkOLmIHvybFwi83OkMptm
djoL8NbuNsAA2s26y2bZLNtU7FmOW5smJIlnt7H4dmK4SFylqZKS/EnUZxGDgn+7
UrrTTOQUir0QZ8vraANsP1M0/LqPcd2YusLmj4jOdZ5Muc2Ch2AA991FofqdKShO
/8cGlsIzwHWGgdnP/YDea5gbetvonayYduixKy3EnYpWQ9iogiBjH4G7QNxcncs=
=v26J
-----END PGP SIGNATURE-----
Merge tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- A copy of Arnds compat wrapper generation series
- Pass information about the KVM guest to the host in form the control
program code and the control program version code
- Map IOV resources to support PCI physical functions on s390
- Add vector load and store alignment hints to improve performance
- Use the "jdd" constraint with gcc 9 to make jump labels working again
- Remove amode workaround for old z/VM releases from the DCSS code
- Add support for in-kernel performance measurements using the CPU
measurement counter facility
- Introduce a new PMU device cpum_cf_diag to capture counters and store
thenn as event raw data.
- Bug fixes and cleanups
* tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390/cpum_cf: Add kernel message exaplanations"
s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y
s390/suspend: fix prefix register reset in swsusp_arch_resume
s390: warn about clearing als implied facilities
s390: allow overriding facilities via command line
s390: clean up redundant facilities list setup
s390/als: remove duplicated in-place implementation of stfle
s390/cio: Use cpa range elsewhere within vfio-ccw
s390/cio: Fix vfio-ccw handling of recursive TICs
s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem
s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation
s390/cpum_cf: Add kernel message exaplanations
s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace
s390/cpum_cf: add ctr_stcctm() function
s390/cpum_cf: move common functions into a separate file
s390/cpum_cf: introduce kernel_cpumcf_avail() function
s390/cpu_mf: replace stcctm5() with the stcctm() function
s390/cpu_mf: add store cpu counter multiple instruction support
s390/cpum_cf: Add minimal in-kernel interface for counter measurements
s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts
...
The DP 1.4 spec defines the SDP header and SDP contents for
a Picture Parameter Set (PPS) that must be sent in advance
of DSC transmission to define the encoding characteristics.
This was done in one struct, drm_dsc_pps_infoframe, which
conatined the SDP header and PPS. Because the PPS is
a property of DSC over any connector, not just DP, and because
drm drivers may have their own SDP structs they wish to use,
make the functions that initialise SDP and PPS headers take
the components they operate on, not drm_dsc_pps_infoframe,
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
Native 420 and 422 transfer modes are new in DSC1.2
In these modes, each two pixels of a slice are treated as one
pixel, so the slice width is half as large (round down) for
the purposes of calucating the groups per line and chunk size
in bytes
In native 422 mode, each pixel has four components, so the
mux component of a group is larger by one additional mux word
and one additional component
Now that there is native 422 support, the configuration option
previously called enable422 is renamed to simple_422 to avoid
confusion
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-3-David.Francis@amd.com
The function intel_compute_rc_parameters is part of the dsc spec
and is not driver-specific. Other drm drivers might like to use
it. The function is not changed; just moved and renamed.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-2-David.Francis@amd.com
If number of caps exceed the limit, ceph_trim_dentires() also trim
dentries with valid leases. Trimming dentry releases references to
associated inode, which may evict inode and release caps.
By default, there is no limit for caps count.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull crypto update from Herbert Xu:
"API:
- Add helper for simple skcipher modes.
- Add helper to register multiple templates.
- Set CRYPTO_TFM_NEED_KEY when setkey fails.
- Require neither or both of export/import in shash.
- AEAD decryption test vectors are now generated from encryption
ones.
- New option CONFIG_CRYPTO_MANAGER_EXTRA_TESTS that includes random
fuzzing.
Algorithms:
- Conversions to skcipher and helper for many templates.
- Add more test vectors for nhpoly1305 and adiantum.
Drivers:
- Add crypto4xx prng support.
- Add xcbc/cmac/ecb support in caam.
- Add AES support for Exynos5433 in s5p.
- Remove sha384/sha512 from artpec7 as hardware cannot do partial
hash"
[ There is a merge of the Freescale SoC tree in order to pull in changes
required by patches to the caam/qi2 driver. ]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (174 commits)
crypto: s5p - add AES support for Exynos5433
dt-bindings: crypto: document Exynos5433 SlimSSS
crypto: crypto4xx - add missing of_node_put after of_device_is_available
crypto: cavium/zip - fix collision with generic cra_driver_name
crypto: af_alg - use struct_size() in sock_kfree_s()
crypto: caam - remove redundant likely/unlikely annotation
crypto: s5p - update iv after AES-CBC op end
crypto: x86/poly1305 - Clear key material from stack in SSE2 variant
crypto: caam - generate hash keys in-place
crypto: caam - fix DMA mapping xcbc key twice
crypto: caam - fix hash context DMA unmap size
hwrng: bcm2835 - fix probe as platform device
crypto: s5p-sss - Use AES_BLOCK_SIZE define instead of number
crypto: stm32 - drop pointless static qualifier in stm32_hash_remove()
crypto: chelsio - Fixed Traffic Stall
crypto: marvell - Remove set but not used variable 'ivsize'
crypto: ccp - Update driver messages to remove some confusion
crypto: adiantum - add 1536 and 4096-byte test vectors
crypto: nhpoly1305 - add a test vector with len % 16 != 0
crypto: arm/aes-ce - update IV after partial final CTR block
...
As we allow per-context engine allows the legacy concept of
I915_EXEC_RING no longer applies universally. We are still exposing the
unrelated exec-id in GEM_BUSY, so transition this ioctl (once more
slightly changing its ABI, but no one cares) over to only reporting the
uabi-class (not instance as we can not foreseeably fit those into the
small bitmask).
The only user of the extended ring information from GEM_BUSY is ddx/sna,
which tries to use the non-rcs business information to guide which
engine to use for subsequent operations on foreign bo. All that matters
for it is the decision between rcs and !rcs, so it is unaffected by the
change in higher bits.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190305162643.20243-1-chris@chris-wilson.co.uk
Pull networking updates from David Miller:
"Here we go, another merge window full of networking and #ebpf changes:
1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
range without dealing with floods of ARP traffic, from Linus
Lüssing.
2) Throttle buffered multicast packet transmission in mt76, from
Felix Fietkau.
3) Support adaptive interrupt moderation in ice, from Brett Creeley.
4) A lot of struct_size conversions, from Gustavo A. R. Silva.
5) Add peek/push/pop commands to bpftool, as well as bash completion,
from Stanislav Fomichev.
6) Optimize sk_msg_clone(), from Vakul Garg.
7) Add SO_BINDTOIFINDEX, from David Herrmann.
8) Be more conservative with local resends due to local congestion,
from Yuchung Cheng.
9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.
10) Add health buffer support to devlink, from Eran Ben Elisha.
11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.
12) Add statistics to basic packet scheduler filter, from Cong Wang.
13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.
14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.
15) Add 3ad stats to bonding, from Nikolay Aleksandrov.
16) Lots of probing improvements for bpftool, from Quentin Monnet.
17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.
18) Allow #ebpf programs to access gso_segs from skb shared info, from
Eric Dumazet.
19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.
20) Support 22260 iwlwifi devices, from Luca Coelho.
21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.
22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.
23) Add spinlock support to #ebpf, from Alexei Starovoitov.
24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.
25) Add device infomation API to devlink, from Jakub Kicinski.
26) Add new timestamping socket options which are y2038 safe, from
Deepa Dinamani.
27) Add RX checksum offloading for various sh_eth chips, from Sergei
Shtylyov.
28) Flow offload infrastructure, from Pablo Neira Ayuso.
29) Numerous cleanups, improvements, and bug fixes to the PHY layer
and many drivers from Heiner Kallweit.
30) Lots of changes to try and make packet scheduler classifiers run
lockless as much as possible, from Vlad Buslov.
31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.
32) Add concurrency tests to tc-tests infrastructure, from Vlad
Buslov.
33) Add hwmon support to aquantia, from Heiner Kallweit.
34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.
And I would be remiss if I didn't thank the various major networking
subsystem maintainers for integrating much of this work before I even
saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
Johannes Berg, Kalle Valo, and many others. Thank you!"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
net/sched: avoid unused-label warning
net: ignore sysctl_devconf_inherit_init_net without SYSCTL
phy: mdio-mux: fix Kconfig dependencies
net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
selftest/net: Remove duplicate header
sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
net/mlx5e: Update tx reporter status in case channels were successfully opened
devlink: Add support for direct reporter health state update
devlink: Update reporter state to error even if recover aborted
sctp: call iov_iter_revert() after sending ABORT
team: Free BPF filter when unregistering netdev
ip6mr: Do not call __IP6_INC_STATS() from preemptible context
isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
cxgb4/chtls: Prefix adapter flags with CXGB4
net-sysfs: Switch to bitmap_zalloc()
mellanox: Switch to bitmap_zalloc()
bpf: add test cases for non-pointer sanitiation logic
mlxsw: i2c: Extend initialization by querying resources data
...
The kill() syscall operates on process identifiers (pid). After a process
has exited its pid can be reused by another process. If a caller sends a
signal to a reused pid it will end up signaling the wrong process. This
issue has often surfaced and there has been a push to address this problem [1].
This patch uses file descriptors (fd) from proc/<pid> as stable handles on
struct pid. Even if a pid is recycled the handle will not change. The fd
can be used to send signals to the process it refers to.
Thus, the new syscall pidfd_send_signal() is introduced to solve this
problem. Instead of pids it operates on process fds (pidfd).
/* prototype and argument /*
long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags);
/* syscall number 424 */
The syscall number was chosen to be 424 to align with Arnd's rework in his
y2038 to minimize merge conflicts (cf. [25]).
In addition to the pidfd and signal argument it takes an additional
siginfo_t and flags argument. If the siginfo_t argument is NULL then
pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it
is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo().
The flags argument is added to allow for future extensions of this syscall.
It currently needs to be passed as 0. Failing to do so will cause EINVAL.
/* pidfd_send_signal() replaces multiple pid-based syscalls */
The pidfd_send_signal() syscall currently takes on the job of
rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a
positive pid is passed to kill(2). It will however be possible to also
replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended.
/* sending signals to threads (tid) and process groups (pgid) */
Specifically, the pidfd_send_signal() syscall does currently not operate on
process groups or threads. This is left for future extensions.
In order to extend the syscall to allow sending signal to threads and
process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and
PIDFD_TYPE_TID) should be added. This implies that the flags argument will
determine what is signaled and not the file descriptor itself. Put in other
words, grouping in this api is a property of the flags argument not a
property of the file descriptor (cf. [13]). Clarification for this has been
requested by Eric (cf. [19]).
When appropriate extensions through the flags argument are added then
pidfd_send_signal() can additionally replace the part of kill(2) which
operates on process groups as well as the tgkill(2) and
rt_tgsigqueueinfo(2) syscalls.
How such an extension could be implemented has been very roughly sketched
in [14], [15], and [16]. However, this should not be taken as a commitment
to a particular implementation. There might be better ways to do it.
Right now this is intentionally left out to keep this patchset as simple as
possible (cf. [4]).
/* naming */
The syscall had various names throughout iterations of this patchset:
- procfd_signal()
- procfd_send_signal()
- taskfd_send_signal()
In the last round of reviews it was pointed out that given that if the
flags argument decides the scope of the signal instead of different types
of fds it might make sense to either settle for "procfd_" or "pidfd_" as
prefix. The community was willing to accept either (cf. [17] and [18]).
Given that one developer expressed strong preference for the "pidfd_"
prefix (cf. [13]) and with other developers less opinionated about the name
we should settle for "pidfd_" to avoid further bikeshedding.
The "_send_signal" suffix was chosen to reflect the fact that the syscall
takes on the job of multiple syscalls. It is therefore intentional that the
name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the
fomer because it might imply that pidfd_send_signal() is a replacement for
kill(2), and not the latter because it is a hassle to remember the correct
spelling - especially for non-native speakers - and because it is not
descriptive enough of what the syscall actually does. The name
"pidfd_send_signal" makes it very clear that its job is to send signals.
/* zombies */
Zombies can be signaled just as any other process. No special error will be
reported since a zombie state is an unreliable state (cf. [3]). However,
this can be added as an extension through the @flags argument if the need
ever arises.
/* cross-namespace signals */
The patch currently enforces that the signaler and signalee either are in
the same pid namespace or that the signaler's pid namespace is an ancestor
of the signalee's pid namespace. This is done for the sake of simplicity
and because it is unclear to what values certain members of struct
siginfo_t would need to be set to (cf. [5], [6]).
/* compat syscalls */
It became clear that we would like to avoid adding compat syscalls
(cf. [7]). The compat syscall handling is now done in kernel/signal.c
itself by adding __copy_siginfo_from_user_generic() which lets us avoid
compat syscalls (cf. [8]). It should be noted that the addition of
__copy_siginfo_from_user_any() is caused by a bug in the original
implementation of rt_sigqueueinfo(2) (cf. 12).
With upcoming rework for syscall handling things might improve
significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain
any additional callers.
/* testing */
This patch was tested on x64 and x86.
/* userspace usage */
An asciinema recording for the basic functionality can be found under [9].
With this patch a process can be killed via:
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info,
unsigned int flags)
{
#ifdef __NR_pidfd_send_signal
return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags);
#else
return -ENOSYS;
#endif
}
int main(int argc, char *argv[])
{
int fd, ret, saved_errno, sig;
if (argc < 3)
exit(EXIT_FAILURE);
fd = open(argv[1], O_DIRECTORY | O_CLOEXEC);
if (fd < 0) {
printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]);
exit(EXIT_FAILURE);
}
sig = atoi(argv[2]);
printf("Sending signal %d to process %s\n", sig, argv[1]);
ret = do_pidfd_send_signal(fd, sig, NULL, 0);
saved_errno = errno;
close(fd);
errno = saved_errno;
if (ret < 0) {
printf("%s - Failed to send signal %d to process %s\n",
strerror(errno), sig, argv[1]);
exit(EXIT_FAILURE);
}
exit(EXIT_SUCCESS);
}
/* Q&A
* Given that it seems the same questions get asked again by people who are
* late to the party it makes sense to add a Q&A section to the commit
* message so it's hopefully easier to avoid duplicate threads.
*
* For the sake of progress please consider these arguments settled unless
* there is a new point that desperately needs to be addressed. Please make
* sure to check the links to the threads in this commit message whether
* this has not already been covered.
*/
Q-01: (Florian Weimer [20], Andrew Morton [21])
What happens when the target process has exited?
A-01: Sending the signal will fail with ESRCH (cf. [22]).
Q-02: (Andrew Morton [21])
Is the task_struct pinned by the fd?
A-02: No. A reference to struct pid is kept. struct pid - as far as I
understand - was created exactly for the reason to not require to
pin struct task_struct (cf. [22]).
Q-03: (Andrew Morton [21])
Does the entire procfs directory remain visible? Just one entry
within it?
A-03: The same thing that happens right now when you hold a file descriptor
to /proc/<pid> open (cf. [22]).
Q-04: (Andrew Morton [21])
Does the pid remain reserved?
A-04: No. This patchset guarantees a stable handle not that pids are not
recycled (cf. [22]).
Q-05: (Andrew Morton [21])
Do attempts to signal that fd return errors?
A-05: See {Q,A}-01.
Q-06: (Andrew Morton [22])
Is there a cleaner way of obtaining the fd? Another syscall perhaps.
A-06: Userspace can already trivially retrieve file descriptors from procfs
so this is something that we will need to support anyway. Hence,
there's no immediate need to add another syscalls just to make
pidfd_send_signal() not dependent on the presence of procfs. However,
adding a syscalls to get such file descriptors is planned for a
future patchset (cf. [22]).
Q-07: (Andrew Morton [21] and others)
This fd-for-a-process sounds like a handy thing and people may well
think up other uses for it in the future, probably unrelated to
signals. Are the code and the interface designed to permit such
future applications?
A-07: Yes (cf. [22]).
Q-08: (Andrew Morton [21] and others)
Now I think about it, why a new syscall? This thing is looking
rather like an ioctl?
A-08: This has been extensively discussed. It was agreed that a syscall is
preferred for a variety or reasons. Here are just a few taken from
prior threads. Syscalls are safer than ioctl()s especially when
signaling to fds. Processes are a core kernel concept so a syscall
seems more appropriate. The layout of the syscall with its four
arguments would require the addition of a custom struct for the
ioctl() thereby causing at least the same amount or even more
complexity for userspace than a simple syscall. The new syscall will
replace multiple other pid-based syscalls (see description above).
The file-descriptors-for-processes concept introduced with this
syscall will be extended with other syscalls in the future. See also
[22], [23] and various other threads already linked in here.
Q-09: (Florian Weimer [24])
What happens if you use the new interface with an O_PATH descriptor?
A-09:
pidfds opened as O_PATH fds cannot be used to send signals to a
process (cf. [2]). Signaling processes through pidfds is the
equivalent of writing to a file. Thus, this is not an operation that
operates "purely at the file descriptor level" as required by the
open(2) manpage. See also [4].
/* References */
[1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/
[2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/
[3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/
[4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/
[5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/
[6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/
[7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/
[8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/
[9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy
[11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/
[12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/
[13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/
[14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/
[15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/
[16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/
[17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/
[18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/
[19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/
[20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/
[22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/
[23]: https://lwn.net/Articles/773459/
[24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/
[25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirsky <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
The following pixel formats are packed format that follows 4:2:2
chroma sampling. For memory represenation each component is
allocated 16 bits each. Thus each pixel occupies 32bit.
Y210: For each component, valid data occupies MSB 10 bits.
LSB 6 bits are filled with zeroes.
Y212: For each component, valid data occupies MSB 12 bits.
LSB 4 bits are filled with zeroes.
Y216: For each component valid data occupies 16 bits,
doesn't require any padding bits.
First 16 bits stores the Y value and the next 16 bits stores one
of the chroma samples alternatively. The first luma sample will
be accompanied by first U sample and second luma sample is
accompanied by the first V sample.
The following pixel formats are packed format that follows 4:4:4
chroma sampling. Channels are arranged in the order UYVA in
increasing memory order.
Y410: Each color component occupies 10 bits and X component
takes 2 bits, thus each pixel occupies 32 bits.
Y412: Each color component is 16 bits where valid data
occupies MSB 12 bits. LSB 4 bits are filled with zeroes.
Thus, each pixel occupies 64 bits.
Y416: Each color component occupies 16 bits for valid data,
doesn't require any padding bits. Thus, each pixel
occupies 64 bits.
v3: fixed missing tab for XYUV8888 (JP)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1551700595-21481-5-git-send-email-swati2.sharma@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXH2D9wAKCRBiEGxRG/Sl
2xRxAQDl+fx3qSZvyKFEdeklwz0EdBZyAGP9Jd9aU5AaVnJz5QD9EIh77Ii/HC1t
Cm6TeM3kfF7JYcqfPlONJqhF4Bgb/A4=
=y0aX
-----END PGP SIGNATURE-----
Merge tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
- finalize previously announced support for initialization of pattern
triggers from Device Tree
- fix for null deref on firmware load failure in leds-lp55xx-common.c
* tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: lp55xx: fix null deref on firmware load failure
leds: trigger: timer: Add initialization from Device Tree
leds: trigger: oneshot: Add initialization from Device Tree
leds: trigger: pattern: Add pattern initialization from Device Tree
leds: Add helper for getting default pattern from Device Tree
dt-bindings: leds: Add pattern initialization from Device Tree
A fairly quiet release for SPI, the biggest thing is the conversion to
use GPIO descriptors which is now 90% done but still needs some
stragglers converting.
- Support for inter-word delays.
- Conversion of the core and most drivers to use GPIO descriptors for
GPIO controlled chip selects.
- New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9WtETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DfrB/92O47HJfHg1xIgOp4BLzT8lA5zQEsy
a8ApcLVLvY6mSfbB/G7RosfoPwTc1eZP5Q2BqzQOBIO+507ao4AcASARmkTwjwkC
eRUJ/THkGyGurs8POtnc5YJlHsT1t743QpqlUNekt+NqognlkPccgc5bNgixfuPD
eVSwVC85SKP3gCpAjVb6FFFmlWr8AKdlgx+41h9QpMNG/85H6xgo4C4Wlajt42/E
wNx+WXzlPyzB5Lc3IGPeF/I/Hu/Ta3hUZLTVpWi5ubM8p4SYGmMZ9l8sURPCz1pK
UMZFpJxx8DWwkj2F/FkoLasfiRqUHIP9K7NfKF0u2xdNbhEk1GA3NAG0
=ctKG
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A fairly quiet release for SPI, the biggest thing is the conversion to
use GPIO descriptors which is now 90% done but still needs some
stragglers converting.
Summary:
- Support for inter-word delays
- Conversion of the core and most drivers to use GPIO descriptors for
GPIO controlled chip selects
- New drivers for NXP FlexSPI and QuadSPI, SiFive and Spreadtrum"
* tag 'spi-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (104 commits)
spi: sh-msiof: Restrict bits per word to 8/16/24/32 on R-Car Gen2/3
spi: sifive: Remove redundant dev_err call in sifive_spi_probe()
spi: sifive: Remove spi_master_put in sifive_spi_remove()
spi: spi-gpio: fix SPI_CS_HIGH capability
spi: pxa2xx: Setup maximum supported DMA transfer length
spi: sifive: Add driver for the SiFive SPI controller
spi: sifive: Add DT documentation for SiFive SPI controller
spi: sprd: Add a prefix for SPI DMA channel macros
spi: sprd: spi: sprd: Add DMA mode support
dt-bindings: spi: Add the DMA properties for the SPI dma mode
spi: sprd: Add the SPI irq function for the SPI DMA mode
dt-bindings: spi: imx: Add an entry for the i.MX8QM compatible
spi: use gpio[d]_set_value_cansleep for setting chipselect GPIO
spi: gpio: Advertise support for SPI_CS_HIGH
spi: sh-msiof: Replace spi_master by spi_controller
spi: sh-hspi: Replace spi_master by spi_controller
spi: rspi: Replace spi_master by spi_controller
spi: atmel-quadspi: add support for sam9x60 qspi controller
dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60
spi: atmel-quadspi: add support for named peripheral clock
...
The bulk of the standout changes in this release are cleanups, with the
core work being a combination of factoring out common code into helpers
and the completion of the conversion of the core to use GPIO
descriptors.
- Addition of helper functions for current limits and conversion of
drivers to use them by Axel Lin.
- Lots and lots of cleanups from Axel Lin.
- Conversion of the core to use GPIO descriptors rather than numbers by
Linus Walleij.
- New drivers for Maxim MAX77650 and ROHM BD70528.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9UosTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DR7B/4x2fjnrnlvDqwzr20jcWH0BTiOCN+s
JpWNn2HxoeNNOn2w52bo0WNBvXElWj5+Lik8xljlj9DWXCgSdys0z5XEOpOmg3Eg
+7AhyHmYBYf2igHWqw3dvL79n2MqdUY6mpbVtbf9kfJ3M5CwkwBUuXYNJLKZhLsm
r06wIaEmCDT9mQNxl7r1tbDUpN8Rjg43W4dNFMYEUnZPpd9zhdwSnTRFxqhpF+K+
GTli4yv3Z2IzZWGvG838/UBETffTfZv/lnuF7f/fagihGnhsp4RSp+3/PYvIV7/v
BIvPUywSXQFiC/NqqtRBkqRKEGclv0itZzZy39hl+zp/k+Im2jzH0gkP
=7lqn
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The bulk of the standout changes in this release are cleanups, with
the core work being a combination of factoring out common code into
helpers and the completion of the conversion of the core to use GPIO
descriptors.
Summary:
- Addition of helper functions for current limits and conversion of
drivers to use them by Axel Lin.
- Lots and lots of cleanups from Axel Lin.
- Conversion of the core to use GPIO descriptors rather than numbers
by Linus Walleij.
- New drivers for Maxim MAX77650 and ROHM BD70528"
* tag 'regulator-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (131 commits)
regulator: mc13xxx: Constify regulator_ops variables
regulator: palmas: Constify palmas_smps_ramp_delay array
regulator: wm831x-dcdc: Convert to use regulator_set/get_current_limit_regmap
regulator: pv88090: Convert to use regulator_set/get_current_limit_regmap
regulator: pv88080: Convert to use regulator_set/get_current_limit_regmap
regulator: pv88060: Convert to use regulator_set/get_current_limit_regmap
regulator: max77650: Convert to use regulator_set/get_current_limit_regmap
regulator: lp873x: Convert to use regulator_set/get_current_limit_regmap
regulator: lp872x: Convert to use regulator_set/get_current_limit_regmap
regulator: da9210: Convert to use regulator_set/get_current_limit_regmap
regulator: da9055: Convert to use regulator_set/get_current_limit_regmap
regulator: core: Add set/get_current_limit helpers for regmap users
regulator: Fix comment for csel_reg and csel_mask
regulator: stm32-vrefbuf: add power management support
regulator: 88pm8607: Remove unused fields from struct pm8607_regulator_info
regulator: 88pm8607: Simplify pm8607_list_voltage implementation
regulator: cpcap: Constify omap4_regulators and xoom_regulators
regulator: cpcap: Remove unused vsel_shift from struct cpcap_regulator
dt-bindings: regulator: tps65218: rectify units of LS3
dt-bindings: regulator: add LS2 load switch documentation
...
There's only two changes here, one fix for conflicting attributes on the
rbtree node structure and the implementation of main status register
support in the interrupt code which supports chips that have a register
to cut down on the number of per-interrupt status registers that need to
be checked when handling interrupts.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlx9T5kTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JRLB/4+Te73Gvb0fFoVzZIxSjuLlxRul97K
6gLgUyxdXrPovBsNIN9r5lG5A0PstfdTs3vrDZfvGmOwQ2eG/Ae7TEb4pt/gF/Rs
KDIYQ6McygEzCEspr4xyR/MV6jIPTr/01YhvA8KsbyhB6kw50WA+QJX/dkrUdyUb
/MwluSWkbUQWHr+iJeLROxhyu2jF2X7Ymu66MVLXR8DHlkm3E5fKu1xPbqIvSA7n
el2j2pJYy4OJ3PQ/5LfASJr4+hEFERPZ1umcQRjXku/og03ZZXp72tyLp4Uz3cGA
Pel2ZF5fB6Lp0CkAXM1DqAALGchiHU6JNEnls3Brnjcovz2pS0nmDUuM
=rFCT
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"There are only two changes here:
- fix for conflicting attributes on the rbtree node structure
- implementation of main status register support in the interrupt
code which supports chips that have a register to cut down on the
number of per-interrupt status registers that need to be checked
when handling interrupts"
* tag 'regmap-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Remove attribute packed from struct 'regcache_rbtree_node'
regmap: regmap-irq: Add main status register support
- mmc: core: Fixup max_discard/trim calculations
- mmc: core: Announce SD specs greater than 4.0
- mmc: core: Add discard support for SD cards
- mmc: core: Don't do retries for CMD6 (SWITCH command)
- mmc: core: Various cleanups and re-structuring
MMC host:
- cqhci: Add maintainers for eMMC CQHCI driver
- sdhci: Consolidate WP GPIO code
- sdhci: Add ADMA3 DMA support for V4 enabled host
- sdhci-pci-o2micro: Fixup card detect support
- sdhci-tegra: Add support for CMDQ
- sdhci-tegra: Support SDMMC pads auto-calibration
- sdhci-esdhc-imx: Add DCMD support and CMDQ support
- sdhci-esdhc-imx: Add support for i.MX6ULL variant
- sdhci-esdhc-imx: Fixup HS400 timing issue
- sdhci-esdhc-imx: Add HS400_ES support for i.MX8QXP
- renesas_sdhi: Avoid CRC errors by adjusting settings to speed mode
- renesas_sdhi: Fixup card initialization for high speed mode
- omap: Fixup timeout settings
- atmel-mci: Enable 8 bits bus-width support
- jz4740: Convert some legacy code to use modern APIs
- mmci: Send a CMD12 to clear DPSM at errors for STM32 sdmmc
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAlx9H6IXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmuXhAAvsaR7GvKGwuUNLN1aR+wHKA4
toS8zG0bEF/mS+xDU/OYX6f96FBQ0rJURCr/LoskVVesw9Z7zU9sn1XQ3EogkM22
EwhDJJ4yHkCMsF1GuCyx/ayeiV6ahMflJIMRJkujSD7S3XZdaAhWoHc0M/VvPM68
2WLjFR185fZAshkvtfN1lLDDGOfsQL8Net/U560nNCVFU0QSPPQcXejfn2ikhtja
P32XsUEVhll+zRAtbuU0IP2rJ0xx0Br5rKSE2fpfbtN51B8KN27BgQcj78IbZzLF
MWqqDADLCXZMLMnN+U6RUKF65Bog6mxLhcuO1x+/GcMcIB5ypIF6DZP44mE+IVyp
4M99Mm/07KxARfsJCwUTCCuVbI1C00T/fTmHiDHn7NhXXVmMq2s823Fvxxo3C59l
5l23EXV/xEPw2doZP6fQp5Wi/uXG0guvWaXAeX7FMWOgatneRRfynOOnigk4zdfX
LqQ17G7CNmNQR3NtP4pNQ0PQPVbQR3D9+Pn/Cecpg1tz5gvWGzJ5DUm3DxMhr66r
CrR32+1PtmsM9SuwiMSADcXDV8H2Bg4OV/VFL6JKP82+2YkfeXYG/9W4FlemnM5L
4zrT+cNuEHhDjQZDg15U7qcMVbNzFN9mUSSc6PLIZc1O5bIMl2NzlXXOHIsPrjb9
TN8TINem5b65j43annE=
=umka
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Fixup max_discard/trim calculations
- Announce SD specs greater than 4.0
- Add discard support for SD cards
- Don't do retries for CMD6 (SWITCH command)
- Various cleanups and re-structuring
MMC host:
- cqhci:
* Add maintainers for eMMC CQHCI driver
- sdhci:
* Consolidate WP GPIO code
* Add ADMA3 DMA support for V4 enabled host
* Fixup card detect support in pci-o2micro driver
* Add support for CMDQ and SDMMC pads auto-calibration in tegra
driver
* Add DCMD support and CMDQ support, support for i.MX6ULL variant,
fixup HS400 timing issue and add HS400_ES support for i.MX8QXP
to esdhc-imx driver
* Avoid CRC errors by adjusting settings to speed mode and fixup
card initialization for high speed mode in renesas_sdhi
* Fixup timeout settings for omap
* Enable 8 bits bus-width support in atmel-mci
* Convert some legacy code in jz4740 driver to use modern APIs
* Send a CMD12 to clear DPSM at errors for STM32 sdmmc mmci
driver"
* tag 'mmc-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (69 commits)
mmc:fix a bug when max_discard is 0
mmc: core: Add a debug print when the card may have been replaced
mmc: core: Add sd discard timeout
mmc: core: Add discard support to sd
mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE
mmc: core: do not retry CMD6 in __mmc_switch()
mmc: core: Convert mmc_align_data_size() into an SDIO specific function
mmc: core: Move mmc_of_parse_voltage() to host.c
mmc: core: Convert mmc_regulator_get_ocrmask() to static
mmc: core: Move regulator helpers to separate file
mmc: of_mmc_spi: Convert to mmc_of_parse_voltage()
mmc: core: Drop retries as in-parameter to mmc_wait_for_app_cmd()
mmc: core: Convert mmc_wait_for_app_cmd() to static
mmc: renesas_sdhi: Change HW adjustment register according to speed mode
mmc: mmci: Send a CMD12 to clear the DPSM at errors
mmc: sdhci-xenon: Fixup already marked switch fall-through
mmc: sdhci-tegra: drop ->get_ro() implementation
mmc: sdhci-omap: drop ->get_ro() implementation
mmc: sdhci: use WP GPIO in sdhci_check_ro()
mmc: wmt-sdmmc: Drop unused include
...
- Use struct_size() where appropriate
- mtd_{read,write}() as wrappers around mtd_{read,write}_oob()
- Fix misuse of PTR_ERR() in docg3
- Coding style improvements in mtdcore.c
SPI NOR changes:
Core changes:
- Add support of octal mode I/O transfer
- Add a bunch of SPI NOR entries to the flash_info table
SPI NOR controller driver changes:
- cadence-quadspi:
* Add support for Octal SPI controller
* write upto 8-bytes data in STIG mode
- mtk-quadspi:
* rename config to a common one
* add SNOR_HWCAPS_READ to spi_nor_hwcaps mask
- Add Tudor as SPI-NOR co-maintainer
NAND changes
NAND core changes:
- Fourth batch of fixes/cleanup to the raw NAND core impacting various
controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2).
- Checking the return code of nand_reset() and nand_readid_op().
- Removing ->legacy.erase and single_erase().
- Simplifying the locking.
- Several implicit fall through annotations.
Raw NAND controllers drivers changes:
- Fixing various possible object reference leaks (MTK, JZ4780, Atmel).
- ST:
* Adding support for STM32 FMC2 NAND flash controller.
- Meson:
* Adding support for Amlogic NAND flash controller.
- Denali:
* Several cleanup patches.
- Sunxi:
* Several cleanup patches.
- FSMC:
* Disabling NAND on remove().
* Resetting NAND timings on resume().
SPI-NAND drivers changes:
- Toshiba:
* Adding support for all Toshiba products.
- Macronix:
* Fixing ECC status read.
- Gigadevice:
* Adding support for GD5F1GQ4UExxG.
-----BEGIN PGP SIGNATURE-----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=wIHY
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"Core MTD changes:
- Use struct_size() where appropriate
- mtd_{read,write}() as wrappers around mtd_{read,write}_oob()
- Fix misuse of PTR_ERR() in docg3
- Coding style improvements in mtdcore.c
SPI NOR changes:
Core changes:
- Add support of octal mode I/O transfer
- Add a bunch of SPI NOR entries to the flash_info table
SPI NOR controller driver changes:
- cadence-quadspi:
* Add support for Octal SPI controller
* write upto 8-bytes data in STIG mode
- mtk-quadspi:
* rename config to a common one
* add SNOR_HWCAPS_READ to spi_nor_hwcaps mask
- Add Tudor as SPI-NOR co-maintainer
NAND changes:
NAND core changes:
- Fourth batch of fixes/cleanup to the raw NAND core impacting
various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2).
- Check the return code of nand_reset() and nand_readid_op().
- Remove ->legacy.erase and single_erase().
- Simplify the locking.
- Several implicit fall through annotations.
Raw NAND controllers drivers changes:
- Fix various possible object reference leaks (MTK, JZ4780, Atmel)
- ST:
* Add support for STM32 FMC2 NAND flash controller
- Meson:
* Add support for Amlogic NAND flash controller
- Denali:
* Several cleanup patches
- Sunxi:
* Several cleanup patches
- FSMC:
* Disable NAND on remove()
* Reset NAND timings on resume()
SPI-NAND drivers changes:
- Toshiba:
* Add support for all Toshiba products.
- Macronix:
* Fix ECC status read.
- Gigadevice:
* Add support for GD5F1GQ4UExxG"
* tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits)
mtd: spi-nor: Fix wrong abbreviation HWCPAS
mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't"
mtd: spi-nor: Add support for en25qh64
mtd: spi-nor: Add support for MX25V8035F
mtd: spi-nor: Add support for EN25Q80A
mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller
dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC
mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1
mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode
mtd: spi-nor: Add support for mx25u3235f
mtd: rawnand: denali_dt: remove single anonymous clock support
mtd: rawnand: mtk: fix possible object reference leak
mtd: rawnand: jz4780: fix possible object reference leak
mtd: rawnand: atmel: fix possible object reference leak
mtd: rawnand: fsmc: Disable NAND on remove()
mtd: rawnand: fsmc: Reset NAND timings on resume()
mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info
mtd: rawnand: denali: remove unused function argument 'raw'
mtd: rawnand: denali: remove unneeded denali_reset_irq() call
...
- Switch mdev to generic UUID API (Andy Shevchenko)
- Fixup platform reset include paths (Masahiro Yamada)
- Fix usage of MINORMASK (Chengguang Xu)
- Remove noise from duplicate spapr table unsets (Alexey Kardashevskiy)
- Restore device state after PM reset (Alex Williamson)
- Ensure memory translation enabled for PCI ROM access (Eric Auger)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=9Ahg
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Switch mdev to generic UUID API (Andy Shevchenko)
- Fixup platform reset include paths (Masahiro Yamada)
- Fix usage of MINORMASK (Chengguang Xu)
- Remove noise from duplicate spapr table unsets (Alexey Kardashevskiy)
- Restore device state after PM reset (Alex Williamson)
- Ensure memory translation enabled for PCI ROM access (Eric Auger)
* tag 'vfio-v5.1-rc1' of git://github.com/awilliam/linux-vfio:
vfio_pci: Enable memory accesses before calling pci_map_rom
vfio/pci: Restore device state on PM transition
vfio/spapr_tce: Skip unsetting already unset table
samples/vfio-mdev/mtty: expand minor range when registering chrdev region
samples/vfio-mdev/mdpy: expand minor range when registering chrdev region
samples/vfio-mdev/mbochs: expand minor range when registering chrdev region
vfio: expand minor range when registering chrdev region
vfio: platform: reset: fix up include directives to remove ccflags-y
vfio-mdev: Switch to use new generic UUID API
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
-
-----BEGIN PGP SIGNATURE-----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=Rf1K
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v5.0:
- Block fb changes for async atomic updates to prevent a use after free.
- Fix ID mismatch error on load in bochs.
- Fix memory leak when drm_setup fails.
- Fixes around handling of DRM_AUTH.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42113611-e2cd-6bdd-7de5-4f8ab5a0cbe6@linux.intel.com
It is possible that a reporter state will be updated due to a recover flow
which is not triggered by a devlink health related operation, but as a side
effect of some other operation in the system.
Expose devlink health API for a direct update of a reporter status.
Move devlink_health_reporter_state enum definition to devlink.h so it could
be used from drivers as a parameter of devlink_health_reporter_state_update.
In addition, add trace_devlink_health_reporter_state_update to provide user
notification for reporter state change.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Every in-kernel use of this function defined it to KERNEL_DS (either as
an actual define, or as an inline function). It's an entirely
historical artifact, and long long long ago used to actually read the
segment selector valueof '%ds' on x86.
Which in the kernel is always KERNEL_DS.
Inspired by a patch from Jann Horn that just did this for a very small
subset of users (the ones in fs/), along with Al who suggested a script.
I then just took it to the logical extreme and removed all the remaining
gunk.
Roughly scripted with
git grep -l '(get_ds())' -- :^tools/ | xargs sed -i 's/(get_ds())/(KERNEL_DS)/'
git grep -lw 'get_ds' -- :^tools/ | xargs sed -i '/^#define get_ds()/d'
plus manual fixups to remove a few unusual usage patterns, the couple of
inline function cases and to fix up a comment that had become stale.
The 'get_ds()' function remains in an x86 kvm selftest, since in user
space it actually does something relevant.
Inspired-by: Jann Horn <jannh@google.com>
Inspired-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro root-caused a race where the IOCB_CMD_POLL handling of
fget/fput() could cause us to access the file pointer after it had
already been freed:
"In more details - normally IOCB_CMD_POLL handling looks so:
1) io_submit(2) allocates aio_kiocb instance and passes it to
aio_poll()
2) aio_poll() resolves the descriptor to struct file by req->file =
fget(iocb->aio_fildes)
3) aio_poll() sets ->woken to false and raises ->ki_refcnt of that
aio_kiocb to 2 (bumps by 1, that is).
4) aio_poll() calls vfs_poll(). After sanity checks (basically,
"poll_wait() had been called and only once") it locks the queue.
That's what the extra reference to iocb had been for - we know we
can safely access it.
5) With queue locked, we check if ->woken has already been set to
true (by aio_poll_wake()) and, if it had been, we unlock the
queue, drop a reference to aio_kiocb and bugger off - at that
point it's a responsibility to aio_poll_wake() and the stuff
called/scheduled by it. That code will drop the reference to file
in req->file, along with the other reference to our aio_kiocb.
6) otherwise, we see whether we need to wait. If we do, we unlock the
queue, drop one reference to aio_kiocb and go away - eventual
wakeup (or cancel) will deal with the reference to file and with
the other reference to aio_kiocb
7) otherwise we remove ourselves from waitqueue (still under the
queue lock), so that wakeup won't get us. No async activity will
be happening, so we can safely drop req->file and iocb ourselves.
If wakeup happens while we are in vfs_poll(), we are fine - aio_kiocb
won't get freed under us, so we can do all the checks and locking
safely. And we don't touch ->file if we detect that case.
However, vfs_poll() most certainly *does* touch the file it had been
given. So wakeup coming while we are still in ->poll() might end up
doing fput() on that file. That case is not too rare, and usually we
are saved by the still present reference from descriptor table - that
fput() is not the final one.
But if another thread closes that descriptor right after our fget()
and wakeup does happen before ->poll() returns, we are in trouble -
final fput() done while we are in the middle of a method:
Al also wrote a patch to take an extra reference to the file descriptor
to fix this, but I instead suggested we just streamline the whole file
pointer handling by submit_io() so that the generic aio submission code
simply keeps the file pointer around until the aio has completed.
Fixes: bfe4037e72 ("aio: implement IOCB_CMD_POLL")
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: syzbot+503d4cc169fcec1cb18c@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-03-04
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
AF_XDP applications by offering higher-level APIs that hide many
of the details of the AF_XDP uapi. Sample programs are converted
over to this new interface as well, from Magnus.
2) Introduce a new cant_sleep() macro for annotation of functions
that cannot sleep and use it in BPF_PROG_RUN() to assert that
BPF programs run under preemption disabled context, from Peter.
3) Introduce per BPF prog stats in order to monitor the usage
of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
knob where monitoring tools can make use of this to efficiently
determine the average cost of programs, from Alexei.
4) Split up BPF selftest's test_progs similarly as we already
did with test_verifier. This allows to further reduce merge
conflicts in future and to get more structure into our
quickly growing BPF selftest suite, from Stanislav.
5) Fix a bug in BTF's dedup algorithm which can cause an infinite
loop in some circumstances; also various BPF doc fixes and
improvements, from Andrii.
6) Various BPF sample cleanups and migration to libbpf in order
to further isolate the old sample loader code (so we can get
rid of it at some point), from Jakub.
7) Add a new BPF helper for BPF cgroup skb progs that allows
to set ECN CE code point and a Host Bandwidth Manager (HBM)
sample program for limiting the bandwidth used by v2 cgroups,
from Lawrence.
8) Enable write access to skb->queue_mapping from tc BPF egress
programs in order to let BPF pick TX queue, from Jesper.
9) Fix a bug in BPF spinlock handling for map-in-map which did
not propagate spin_lock_off to the meta map, from Yonghong.
10) Fix a bug in the new per-CPU BPF prog counters to properly
initialize stats for each CPU, from Eric.
11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
from Willem.
12) Fix various BPF samples bugs in XDP and tracing progs,
from Toke, Daniel and Yonghong.
13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
enforces it now everywhere, from Anders.
14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
get error handling working, from Dan.
15) Fix bpftool documentation and auto-completion with regards
to stream_{verdict,parser} attach types, from Alban.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
No more users left so it can go alongside its helpers.
Update the tinydrm docs description and remove todo entry.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
This adds a resource managed (devres) version of drm_dev_init().
v2: Remove devm_drm_dev_register() since we can't touch hw in devm
release functions and drivers want to disable hw on driver module
unload (Daniel Vetter, Greg KH)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-3-noralf@tronnes.org
When commit 5becfb1df5 ("kmsg: merge continuation records while
printing") introduced LOG_PREFIX, we used KERN_DEFAULT etc. as a flag
for setting LOG_PREFIX in order to tell whether to call cont_add()
(i.e. whether to append the message to "struct cont").
But since commit 4bcc595ccd ("printk: reinstate KERN_CONT for
printing continuation lines") inverted the behavior (i.e. don't append
the message to "struct cont" unless KERN_CONT is specified) and commit
5aa068ea40 ("printk: remove games with previous record flags")
removed the last LOG_PREFIX check, setting LOG_PREFIX via KERN_DEFAULT
etc. is no longer meaningful.
Therefore, we can remove LOG_PREFIX and make KERN_DEFAULT empty string.
Link: http://lkml.kernel.org/r/1550829580-9189-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
To: Steven Rostedt <rostedt@goodmis.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
* pm-cpufreq: (48 commits)
cpufreq: kryo: Release OPP tables on module removal
cpufreq: ap806: add missing of_node_put after of_device_is_available
cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies
cpufreq: Pass updated policy to driver ->setpolicy() callback
cpufreq: Fix two debug messages in cpufreq_set_policy()
cpufreq: Reorder and simplify cpufreq_update_policy()
cpufreq: Add kerneldoc comments for two core functions
cpufreq: intel_pstate: Rework iowait boosting to be less aggressive
cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate()
cpufreq: intel_pstate: Avoid redundant initialization of local vars
cpufreq / cppc: Work around for Hisilicon CPPC cpufreq
ACPI / CPPC: Add a helper to get desired performance
cpufreq: davinci: move configuration to include/linux/platform_data
cpufreq: speedstep: convert BUG() to BUG_ON()
cpufreq: powernv: fix missing check of return value in init_powernv_pstates()
cpufreq: longhaul: remove unneeded semicolon
cpufreq: pcc-cpufreq: remove unneeded semicolon
cpufreq: Replace double NOT (!!) with single NOT (!)
cpufreq: intel_pstate: Add reasons for failure and debug messages
cpufreq: dt: Implement online/offline() callbacks
...
* pm-cpuidle:
ACPI / processor: Set P_LVL{2,3} idle state descriptions
intel_idle: add support for Jacobsville
cpuidle: dt: bail out if the idle-state DT node is not compatible
cpuidle: use BIT() for idle state flags and remove CPUIDLE_DRIVER_FLAGS_MASK
Documentation: driver-api: PM: Add cpuidle document
cpuidle: New timer events oriented governor for tickless systems
* powercap:
powercap/intel_rapl: add Ice Lake mobile
powercap: intel_rapl: add support for Jacobsville
* pm-core:
PM / core: Add support to skip power management in device/driver model
PM / suspend: Print debug messages for device using direct-complete
PM-runtime: update time accounting only when enabled
PM-runtime: Switch accounting over to ktime_get_mono_fast_ns()
PM-runtime: Optimize pm_runtime_autosuspend_expiration()
PM-runtime: Replace jiffies-based accounting with ktime-based accounting
PM-runtime: update accounting_timestamp on enable
PM: clock_ops: fix missing clk_prepare() return value check
drm/i915: Move on the new pm runtime interface
PM-runtime: Add new interface to get accounted time
* pm-sleep:
PM / wakeup: fix kerneldoc comment for pm_wakeup_dev_event()
* pm-qos:
PM: QoS: no need to check return value of debugfs_create functions
* pm-domains:
PM / Domains: Mark "name" const in dev_pm_domain_attach_by_name()
PM / Domains: Mark "name" const in genpd_dev_pm_attach_by_name()
PM: domains: no need to check return value of debugfs_create functions
* pm-em:
PM / EM: Expose the Energy Model in debugfs
* acpi-apei: (29 commits)
efi: cper: Fix possible out-of-bounds access
ACPI: APEI: Fix possible out-of-bounds access to BERT region
MAINTAINERS: Add James Morse to the list of APEI reviewers
ACPI / APEI: Add support for the SDEI GHES Notification type
firmware: arm_sdei: Add ACPI GHES registration helper
ACPI / APEI: Use separate fixmap pages for arm64 NMI-like notifications
ACPI / APEI: Only use queued estatus entry during in_nmi_queue_one_entry()
ACPI / APEI: Split ghes_read_estatus() to allow a peek at the CPER length
ACPI / APEI: Make GHES estatus header validation more user friendly
ACPI / APEI: Pass ghes and estatus separately to avoid a later copy
ACPI / APEI: Let the notification helper specify the fixmap slot
ACPI / APEI: Move locking to the notification helper
arm64: KVM/mm: Move SEA handling behind a single 'claim' interface
KVM: arm/arm64: Add kvm_ras.h to collect kvm specific RAS plumbing
ACPI / APEI: Switch NOTIFY_SEA to use the estatus queue
ACPI / APEI: Move NOTIFY_SEA between the estatus-queue and NOTIFY_NMI
ACPI / APEI: Don't allow ghes_ack_error() to mask earlier errors
ACPI / APEI: Generalise the estatus queue's notify code
ACPI / APEI: Don't update struct ghes' flags in read/clear estatus
ACPI / APEI: Remove spurious GHES_TO_CLEAR check
...
* acpi-tables:
ACPI/PPTT: Add acpi_pptt_warn_missing() to consolidate logs
ACPI / tables: table override from built-in initrd
* acpi-debug:
ACPI: debug: Clean up acpi_aml_init()
ACPI: no need to check return value of debugfs_create functions
* acpi-ec:
Revert "ACPI / EC: Remove old CLEAR_ON_RESUME quirk"
ACPI: EC: Simplify boot EC checks in acpi_ec_add()
ACPI: EC: Eliminate acpi_config_boot_ec()
ACPI: EC: Make acpi_ec_dsdt_probe() more straightforward
ACPI: EC: Make acpi_ec_ecdt_probe() more straightforward
ACPI: EC: Declare boot_ec as static
ACPI: EC: Clean up probing for early EC
* acpi-dptf:
ACPI / DPTF: remove header search path to the parent directory
* acpica:
ACPICA: Update version to 20190215
ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
ACPICA: ACPI 6.3: add GTDT Revision 3 support
ACPICA: ACPI 6.3: HMAT updates
ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
ACPICA: Update/clarify messages for control method failures
ACPICA: Debugger: Fix possible fault with the "test objects" command
ACPICA: Interpreter: Emit warning for creation of a zero-length op region
ACPICA: Remove legacy module-level code support
ACPICA: Get rid of acpi_sleep_dispatch()
ACPICA: Update version to 20190108
ACPICA: All acpica: Update copyrights to 2019
ACPICA: acpiexec: Add option to dump extra info for memory leaks
ACPICA: Convert more ACPI errors to firmware errors
TLS device cannot use the sw context. This patch returns the original
tls device write space handler and moves the sw/device specific portions
to the relevant files.
Also, we remove the write_space call for the tls_sw flow, because it
handles partial records in its delayed tx work handler.
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
genphy_no_soft_reset and gen10g_no_soft_reset are both the same no-ops,
one is enough.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
gen10g_read_status is deprecated, therefore stop exporting it.
We don't want to encourage anybody to use it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
ETHTOOL_LINK_MODE_10000baseT_Full_BIT is set anyway in the supported
and advertising bitmap because it's part of PHY_10GBIT_FEATURES.
And all users of gen10g_config_init use PHY_10GBIT_FEATURES.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_suspend() and phy_resume() are no-ops anyway if no callback is
defined. Therefore we don't need these stubs.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
By default IPv6 socket with IPV6_ROUTER_ALERT socket option set will
receive all IPv6 RA packets from all namespaces.
IPV6_ROUTER_ALERT_ISOLATE socket option restricts packets received by
the socket to be only from the socket's namespace.
Signed-off-by: Maxim Martynov <maxim@arista.com>
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flag 'FWMARK' to enable use of firewall connmarks as tin selector.
The connmark (skbuff->mark) needs to be in the range 1->tin_cnt ie.
for diffserv3 the mark needs to be 1->3.
Background
Typically CAKE uses DSCP as the basis for tin selection. DSCP values
are relatively easily changed as part of the egress path, usually with
iptables & the mangle table, ingress is more challenging. CAKE is often
used on the WAN interface of a residential gateway where passthrough of
DSCP from the ISP is either missing or set to unhelpful values thus use
of ingress DSCP values for tin selection isn't helpful in that
environment.
An approach to solving the ingress tin selection problem is to use
CAKE's understanding of tc filters. Naive tc filters could match on
source/destination port numbers and force tin selection that way, but
multiple filters don't scale particularly well as each filter must be
traversed whether it matches or not. e.g. a simple example to map 3
firewall marks to tins:
MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
tc filter add dev $DEV parent $MAJOR protocol all handle 0x01 fw action skbedit priority ${MAJOR}1
tc filter add dev $DEV parent $MAJOR protocol all handle 0x02 fw action skbedit priority ${MAJOR}2
tc filter add dev $DEV parent $MAJOR protocol all handle 0x03 fw action skbedit priority ${MAJOR}3
Another option is to use eBPF cls_act with tc filters e.g.
MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
tc filter add dev $DEV parent $MAJOR bpf da obj my-bpf-fwmark-to-class.o
This has the disadvantages of a) needing someone to write & maintain
the bpf program, b) a bpf toolchain to compile it and c) needing to
hardcode the major number in the bpf program so it matches the cake
instance (or forcing the cake instance to a particular major number)
since the major number cannot be passed to the bpf program via tc
command line.
As already hinted at by the previous examples, it would be helpful
to associate tins with something that survives the Internet path and
ideally allows tin selection on both egress and ingress. Netfilter's
conntrack permits setting an identifying mark on a connection which
can also be restored to an ingress packet with tc action connmark e.g.
tc filter add dev eth0 parent ffff: protocol all prio 10 u32 \
match u32 0 0 flowid 1:1 action connmark action mirred egress redirect dev ifb1
Since tc's connmark action has restored any connmark into skb->mark,
any of the previous solutions are based upon it and in one form or
another copy that mark to the skb->priority field where again CAKE
picks this up.
This change cuts out at least one of the (less intuitive &
non-scalable) middlemen and permit direct access to skb->mark.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlx8YYIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGs5MIAIiVVIH+C0St60vf
nzfGpVe+BETe199UveM4Ic2FWMk97ZhSk5Oj6HwYY9vnw4iwoRCZIO5B8Dna4nxY
8XjiwxpJRVLq+7Y1d61O6NHo6UjFHF0GMzyeJeNNUq+mCISxZdLsqzsszt9X09mA
GoJjZ0UMw2Tkz/s3Ie4MumKASc+y2CjJc0ZVEZlJsMaqMJLIfUn/CrTzHBivmuqJ
sV6ZkP4as6h87bI9mi79p8pzvVooCRJ10cg4A/DHG4t2bEAIlB4t5dfZRFzVMhVo
cCPRk9tiA9y4I3zBjcuAZMODcBpfdWoQK8TqYw2cDS3LEDMgnEdIH6snMYHr69z0
kZJjA2A=
=Qs0l
-----END PGP SIGNATURE-----
Merge v5.0 into drm-next
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here.
Also some misc fixes are landed by me, but the pr has them as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
By setting curr_table, n_current_limits, csel_reg and csel_mask, the
regmap users can use regulator_set_current_limit_regmap and
regulator_get_current_limit_regmap for set/get_current_limit callbacks.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The csel_reg and csel_mask fields in struct regulator_desc needs to
be generic for drivers. Not just for TPS65218.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
KSZ9893 switch is similar to KSZ9477 switch except the ingress tail tag
has 1 byte instead of 2 bytes. The size of the portmap is smaller and
so the override and lookup bits are also moved.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
