error injection to other IP blocks (except UMC) will be enabled
until RAS feature stablize on those IP blocks
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX RAS has not been stablized yet. disable GFX ras until
it is fully funcitonal.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With gfxclk or uclk dpm disabled, it's reasonable to report bootup clock
as the max supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GDS and GWS blocks default to allowing all VMIDs to
access all entries. Graphics VMIDs can handle setting
these limits when the driver launches work. However,
compute workloads under HWS control don't go through the
kernel driver. Instead, HWS firmware should set these
limits when a process is put into a VMID slot.
Disable access to these devices by default by turning off
all mask bits (for OA) and setting BASE=SIZE=0 (for GDS
and GWS) for all compute VMIDs. If a process wants to use
these resources, they can request this from the HWS
firmware (when such capabilities are enabled). HWS will
then handle setting the base and limit for the process when
it is assigned to a VMID.
This will also prevent user kernels from getting 'stuck' in
GWS by accident if they write GWS-using code but HWS
firmware is not set up to handle GWS reset. Until HWS is
enabled to handle GWS properly, all GWS accesses will
MEM_VIOL fault the kernel.
v2: Move initialization outside of SRBM mutex
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A single 32-bit PSR2 training pattern field follows the sixteen element
array of PSR table entries in the VBT spec. But, we incorrectly define
this PSR2 field for each of the PSR table entries. As a result, the PSR1
training pattern duration for any panel_type != 0 will be parsed
incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb
version >= 226 will also be wrong.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.2
Fixes: 88a0d9606a ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: François Guerraz <kubrick@fgv6.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com
[WHY] dc sw clock implementation of navi10 and raven are not exact the
same. dcccg, dchub reference clock initialization is done after dc calls
vbios dispcontroller_init table. for raven family, before
dispcontroller_init is called by dc, the ref clk values are referred
by sw clock implementation and program asic register using wrong
values. this causes dchub pstate error. This need provide valid ref
clk values. for navi10, since dispcontroller_init is not called,
dchubbub_global_timer_enable = 0, hubbub2_get_dchub_ref_freq will
hit aeert. this need remove hubbub2_get_dchub_ref_freq from this
location and move to dcn20_init_hw.
[HOW] for all asic, initialize dccg, dchub ref clk with data from
vbios firmware table by default. for raven asic family, use these data
from vbios, for asic which support sw dccg component, like navi10,
read ref clk by sw dccg functions and update the ref clk.
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dpm sensor function already does this for us. This fixes
the freq*_input files with the new SMU implementation.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Workaround for now to avoid underflow.
The uclk switch time should really be bumped up to 404, but doing so
would expose p-state hang issues for higher bandwidth display
configurations.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As recently disovered by forcing big-core (!llc) machines to use the GTT
paths, we need our full GTT write flush before manipulating the GTT PTE
or else the writes may be directed to the wrong page.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718145407.21352-2-chris@chris-wilson.co.uk
On VLV/CHV there is some kind of linkage between the cdclk frequency
and the DP link frequency. The spec says:
"For DP audio configuration, cdclk frequency shall be set to
meet the following requirements:
DP Link Frequency(MHz) | Cdclk frequency(MHz)
270 | 320 or higher
162 | 200 or higher"
I suspect that would more accurately be expressed as
"cdclk >= DP link clock", and in any case we can express it like
that in the code because of the limited set of cdclk (200, 266,
320, 400 MHz) and link frequencies (162 and 270 MHz) we support.
Without this we can end up in a situation where the cdclk
is too low and enabling DP audio will kill the pipe. Happens
eg. with 2560x1440 modes where the 266MHz cdclk is sufficient
to pump the pixels (241.5 MHz dotclock) but is too low for
the DP audio due to the link frequency being 270 MHz.
v2: Spell out the cdclk and link frequencies we actually support
Cc: stable@vger.kernel.org
Tested-by: Stefan Gottwald <gottwald@igel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Although, DPLL4 enable and disable is associated with MGPLL1_ENABLE
register, we can use ICL_DPLL_CFGCR0/CR1 macros to access this dpll's
CR0 and CR1 registers by passing an id of 4 to these macros.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717021316.18610-1-vivek.kasireddy@intel.com
- Revert properties exposed in komeda that need improvement before they become ABI.
- Only add modes from the cmdline if they are valid.
- Add orientation quirk for GPD MicroPC.
- Reduce stack usage in drm selftests.
- Fix bochs framebuffer setup.
-----BEGIN PGP SIGNATURE-----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=oNyN
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2019-07-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Pull request for drm-misc-fixes-next for v5.3:
- Revert properties exposed in komeda that need improvement before they become ABI.
- Only add modes from the cmdline if they are valid.
- Add orientation quirk for GPD MicroPC.
- Reduce stack usage in drm selftests.
- Fix bochs framebuffer setup.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e6b84ce4-2728-fb02-87c1-6a6b87703c0b@linux.intel.com
If we shut down a process without having destroyed its GWS-using
queues, it is possible that GWS BO will still be in the process
BO list during the gpuvm destruction. This list should be empty
at that time, so we should remove the GWS allocation at the
process uninit point if it is still around.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The register debugfs interface was using the wrong bitmask for vmid
selection for GFX_CNTL.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Optimization for the socket power calculation is introduced.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do not halt driver loading on if_version mismatch. As our
driver and FWs are backward compatible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interface was used in a confusing way. In profile mode scenario,
the 2nd parameter of the interface was used in a different way from
other scenarios.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the lock was already held on the entrance to smu_handle_task.
- V2: lock in small granularity
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No access before allocation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix memory allocation failure check.
- V2: fix one more similar error
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Under memory pressure, buffer moves between RAM to VRAM can
fail when there is no GTT space available. In those cases
amdgpu_bo_move falls back to ttm_bo_move_memcpy, which seems to
succeed, although it doesn't really support non-contiguous or
invisible VRAM. This manifests as VM faults with corrupted page
table entries in KFD eviction stress tests.
Print some helpful messages when lack of GTT space is causing buffer
moves to fail. Check that source and destination memory regions are
supported by ttm_bo_move_memcpy before taking that fallback.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used anymore.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Noticed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Push the engine stop into the back reset_prepare (where it already was!)
This allows us to avoid dangerously setting the RING registers to 0 for
logical contexts. If we clear the register on a live context, those
invalid register values are recorded in the logical context state and
replayed (with hilarious results).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-2-chris@chris-wilson.co.uk
This attempts to address outstanding review feedback from
commit b8a2948fa2 ("drm/panel: simple: Add ability to override typical timing")
Specifically:
* It was requested that I document (in the structure definition) that
the device tree override had no effect if 'struct drm_display_mode'
was used in the panel description. I have provided full Doxygen
comments for 'struct panel_desc' to accomplish that.
* panel_simple_get_fixed_modes() was thought to be a confusing name,
so it has been renamed to panel_simple_get_display_modes().
* panel_simple_parse_override_mode() was thought to be better named as
panel_simple_parse_panel_timing_node().
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712163333.231884-1-dianders@chromium.org
Although the DisplayPort spec explicitly calls out the 1.62/2.7/5.4/8.1
link rates, the value of LINK_BW_SET is calculated. The DisplayPort
spec says "Main-Link Bandwidth Setting = Value x 0.27Gbps/lane".
A bridge that we're looking to upstream uses 6.75Gbps rate (value 0x19)
[1], and that precludes it from using these functions.
This 6.75Gbps rate is defined in the spec as (credit to Ville for posting this):
A MyDP Source device, upon reading the MAX_LINK_RATE register of the
downstream DPRX programmed to 19h (which can be the case only for a
MyDP-to-Legacy or MyDP-to-DP lane count converter) can program the
LINK_BW_SET register (DPCD Address 00100h) to 19h to enable 6.75Gbps/lane."
So to avoid failing on legitimate rates in the future, this patch calculates thevalues according to spec instead of restricting these values to one of the
DP_LINK_BW_* #defines.
No functional change for the well-defined values, but we lose the
warning (and return the correct value) for ill-defined bw values.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[1] https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/1689251/2/drivers/gpu/drm/bridge/analogix/anx7625.c#636
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717160148.256826-1-sean@poorly.run
By stopping the rings, we may trigger an arbitration point resulting in
a premature context-switch (i.e. a completion event before the request
is actually complete). This clears the active context before the reset,
but we must remember to rewind the incomplete context for replay upon
resume.
Fixes: 1863e3020a ("drm/i915/execlists: Always reset the context's RING registers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716124931.5870-3-chris@chris-wilson.co.uk
Commit f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode") changed
the default from 0 to -1 but forgot to update the description.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190717104418.23809-1-tvrtko.ursulin@linux.intel.com
Drop use of the deprecated drmP.h header file.
While touching the include files divide them up in blocks
in the typical order:
\#include <linux/*>
\#include <video/*>
\#include <drm/*>
\#include ""
And sort the includes in the blocks
Add the necessary includes to fix build after removal of drmP.h
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-20-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the list of include files move the
blocks so they follow the common pattern:
\#include <linux/*>
\#include <video/*>
\#include <drm/*>
\#include ""
Within each block sort the include files.
Add the includes needed to fix build after the removal of drmP.h.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-19-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the include files divide them in blocks and sort the
include files within each block.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-18-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-17-sam@ravnborg.org
Dropped drmP.h and all other header files not used by tilcdc_drv.h.
Added the minimal includes and forwards to make the header file
self-contained.
Then dropped the remaining uses of drmP.h and fixed all fall-out.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-15-sam@ravnborg.org
Drop use of the deprecated drmP.h header.
Replace with necessary includes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-14-sam@ravnborg.org
Drop use of the deprecated header drmP.h.
Replace with necessary includes in the individual .c files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Deepak Sharma <deepak.sharma@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-13-sam@ravnborg.org
Drop the single user of drmP.h - replace it with relevant includes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-11-sam@ravnborg.org
Drop use of the deprecated header drmP.h.
Rearranged list of include files to match rest of
DRM too.
The drmP.h file was deleted from the header file, and the necessary
includes was added to the .c files to fix build.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-10-sam@ravnborg.org
The drmP.h header file is deprecated.
Drop it from all files in the udl driver.
Made the header files self contained, which then
made it simpler to update the .c files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Robert Tarasov <tutankhamen@chromium.org>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Emil Lundmark <lndmrk@chromium.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-9-sam@ravnborg.org
Replace use of the deprecated drmP.h header file
with relevant includes.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-8-sam@ravnborg.org
Drop use of the deprecated header drmP.h.
Fix so vc4_drv.h is now self-contained, and fixed fall-out in remaining
files.
Divided include files in blocks.
Sorted include files within their blocks.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-7-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
While touching the list of include file, use the typical order of the
blocks:
\#include <linux/*>
\#include <video/*>
\#include <drm/*>
\#include ""
Within each block, sort the files.
Include necessary files to fix build after the drmP.h removal.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-6-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Fix fallout.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-5-sam@ravnborg.org
Drop use of the deprecated drmP.h header.
Sort includes in blocks while touching the files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-4-sam@ravnborg.org
Drop use of the deprecated drmP.h header file.
Made v3d_drv.h self-contained with only sufficient
include files.
Fixed fallout in remaining files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-3-sam@ravnborg.org
Drop use of the deprecated drmP.h header.
While doing so used the opportunity
to clean up a little so includes are now
sorted and removed unused include files.
In a few cases added some forwards to allow header
files to built in different include order.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Maxime Jourdan <mjourdan@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-2-sam@ravnborg.org
Some files got renamed but probably due to some merge conflicts,
a few references still point to the old locations.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
