Add the EMAC's OCP reset property on Arria10. The OCP reset bits are
also needed to correctly bring the EMACs out of reset correctly.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add the two ltc2497 devices that are on the SoCFPGA Arria10
Socdk board at addresses 0x14 and 0x16.
Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
In set_pte_at(), we read the old pte value so that it can be passed into
checks for racy hw updates. These checks are only performed for
CONFIG_DEBUG_VM, and the value is not used otherwise.
Since we read the pte value with READ_ONCE(), the compiler cannot elide
the redundant read for !CONFIG_DEBUG_VM kernels.
Let's ameliorate matters by moving the read and the checks into a
helper, __check_racy_pte_update(), which only performs the read when the
value will be used. This also allows us to reformat the conditions for
clarity.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fix sparse warnings:
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:532:25: warning: symbol 'am33xx_gpio_hwmod_class' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:542:19: warning: symbol 'am33xx_gpio1_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:562:19: warning: symbol 'am33xx_gpio2_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c:582:19: warning: symbol 'am33xx_gpio3_hwmod' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Default values fit better than these historical settings.
Hardware layout had been adapted accordingly already in
alpha stage. They did not cause problems for a long time.
Removed values now.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Rename user led nodes to match the phytec user leds name scheme.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As nand flash is not always the primary storage device any more
disable it in the phycore-som include file. Enable it the device tree
files where it is populated.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The phyCORE-AM335x EMMC modules have an EMMC populated and are based
on the phyCORE-AM335x R2 SOM. Therefore, the EMMC node will be added to
the phycore-som devce tree but is by default disabled.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Move regulators directly to the root node like most am335x boards do.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There are two LCD device released by Logic PD for the Torpedo,
type 15 and Type 28. The stock dts file supports the older LCD,
so this patch enables support for the newer one.
For details between these different LCD's see
https://support.logicpd.com/DesktopModules/Bring2mind/DMX/Download.aspx?portalid=0&EntryId=2777
Signed-off-by: Adam Ford <aford173@gmail.com>
[tony@atomide.com: removed extra blank line for checkpatch]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Active level of the mmc1 cd gpio needs to be low instead of high.
Fix PCM-953 and phyBOARD-WEGA.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
usb4_tm is unsed on dra72 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
made default to 'n',
2. It is not recommended (help message: "This should not be used today
[...] creates a high system load") and was kept only for ancient
userland,
3. Certain userland specifically requests it to be disabled (systemd
README: "Legacy hotplug slows down the system and confuses udev").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Wire up the clone3() call on all arches that don't require hand-rolled
assembly.
Some of the arches look like they need special assembly massaging and it is
probably smarter if the appropriate arch maintainers would do the actual
wiring. Arches that are wired-up are:
- x86{_32,64}
- arm{64}
- xtensa
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <adrian@lisas.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: x86@kernel.org
This adds the clone3 system call.
As mentioned several times already (cf. [7], [8]) here's the promised
patchset for clone3().
We recently merged the CLONE_PIDFD patchset (cf. [1]). It took the last
free flag from clone().
Independent of the CLONE_PIDFD patchset a time namespace has been discussed
at Linux Plumber Conference last year and has been sent out and reviewed
(cf. [5]). It is expected that it will go upstream in the not too distant
future. However, it relies on the addition of the CLONE_NEWTIME flag to
clone(). The only other good candidate - CLONE_DETACHED - is currently not
recyclable as we have identified at least two large or widely used
codebases that currently pass this flag (cf. [2], [3], and [4]). Given that
CLONE_PIDFD grabbed the last clone() flag the time namespace is effectively
blocked. clone3() has the advantage that it will unblock this patchset
again. In general, clone3() is extensible and allows for the implementation
of new features.
The idea is to keep clone3() very simple and close to the original clone(),
specifically, to keep on supporting old clone()-based workloads.
We know there have been various creative proposals how a new process
creation syscall or even api is supposed to look like. Some people even
going so far as to argue that the traditional fork()+exec() split should be
abandoned in favor of an in-kernel version of spawn(). Independent of
whether or not we personally think spawn() is a good idea this patchset has
and does not want to have anything to do with this.
One stance we take is that there's no real good alternative to
clone()+exec() and we need and want to support this model going forward;
independent of spawn().
The following requirements guided clone3():
- bump the number of available flags
- move arguments that are currently passed as separate arguments
in clone() into a dedicated struct clone_args
- choose a struct layout that is easy to handle on 32 and on 64 bit
- choose a struct layout that is extensible
- give new flags that currently need to abuse another flag's dedicated
return argument in clone() their own dedicated return argument
(e.g. CLONE_PIDFD)
- use a separate kernel internal struct kernel_clone_args that is
properly typed according to current kernel conventions in fork.c and is
different from the uapi struct clone_args
- port _do_fork() to use kernel_clone_args so that all process creation
syscalls such as fork(), vfork(), clone(), and clone3() behave identical
(Arnd suggested, that we can probably also port do_fork() itself in a
separate patchset.)
- ease of transition for userspace from clone() to clone3()
This very much means that we do *not* remove functionality that userspace
currently relies on as the latter is a good way of creating a syscall
that won't be adopted.
- do not try to be clever or complex: keep clone3() as dumb as possible
In accordance with Linus suggestions (cf. [11]), clone3() has the following
signature:
/* uapi */
struct clone_args {
__aligned_u64 flags;
__aligned_u64 pidfd;
__aligned_u64 child_tid;
__aligned_u64 parent_tid;
__aligned_u64 exit_signal;
__aligned_u64 stack;
__aligned_u64 stack_size;
__aligned_u64 tls;
};
/* kernel internal */
struct kernel_clone_args {
u64 flags;
int __user *pidfd;
int __user *child_tid;
int __user *parent_tid;
int exit_signal;
unsigned long stack;
unsigned long stack_size;
unsigned long tls;
};
long sys_clone3(struct clone_args __user *uargs, size_t size)
clone3() cleanly supports all of the supported flags from clone() and thus
all legacy workloads.
The advantage of sticking close to the old clone() is the low cost for
userspace to switch to this new api. Quite a lot of userspace apis (e.g.
pthreads) are based on the clone() syscall. With the new clone3() syscall
supporting all of the old workloads and opening up the ability to add new
features should make switching to it for userspace more appealing. In
essence, glibc can just write a simple wrapper to switch from clone() to
clone3().
There has been some interest in this patchset already. We have received a
patch from the CRIU corner for clone3() that would set the PID/TID of a
restored process without /proc/sys/kernel/ns_last_pid to eliminate a race.
/* User visible differences to legacy clone() */
- CLONE_DETACHED will cause EINVAL with clone3()
- CSIGNAL is deprecated
It is superseeded by a dedicated "exit_signal" argument in struct
clone_args freeing up space for additional flags.
This is based on a suggestion from Andrei and Linus (cf. [9] and [10])
/* References */
[1]: b3e5838252
[2]: https://dxr.mozilla.org/mozilla-central/source/security/sandbox/linux/SandboxFilter.cpp#343
[3]: https://git.musl-libc.org/cgit/musl/tree/src/thread/pthread_create.c#n233
[4]: https://sources.debian.org/src/blcr/0.8.5-2.3/cr_module/cr_dump_self.c/?hl=740#L740
[5]: https://lore.kernel.org/lkml/20190425161416.26600-1-dima@arista.com/
[6]: https://lore.kernel.org/lkml/20190425161416.26600-2-dima@arista.com/
[7]: https://lore.kernel.org/lkml/CAHrFyr5HxpGXA2YrKza-oB-GGwJCqwPfyhD-Y5wbktWZdt0sGQ@mail.gmail.com/
[8]: https://lore.kernel.org/lkml/20190524102756.qjsjxukuq2f4t6bo@brauner.io/
[9]: https://lore.kernel.org/lkml/20190529222414.GA6492@gmail.com/
[10]: https://lore.kernel.org/lkml/CAHk-=whQP-Ykxi=zSYaV9iXsHsENa+2fdj-zYKwyeyed63Lsfw@mail.gmail.com/
[11]: https://lore.kernel.org/lkml/CAHk-=wieuV4hGwznPsX-8E0G2FKhx3NjZ9X3dTKh5zKd+iqOBw@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <adrian@lisas.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: linux-api@vger.kernel.org
Since the initial support of unicore32, it has always had a single
defconfig. Rename it to 'defconfig', which is now the standard name
when arch has just a single defconfig file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Until recently, if KBUILD_DEFCONFIG was not set by the arch Makefile,
the default path arch/*/defconfig was used.
The last users of the default are gone by the following commits:
- Commit f3e20ad67b ("s390: move arch/s390/defconfig to
arch/s390/configs/defconfig")
- Commit 986a13769c ("alpha: move arch/alpha/defconfig to
arch/alpha/configs/defconfig")
Let's set arch/*/configs/defconfig as a new default. This saves
KBUILD_DEFCONFIG for some architectures.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds a reset-cells property to the gcc controller on the QCS404.
Without this in place, we get warnings like the following if nodes reference
a gcc reset:
arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3
DTC arch/arm64/boot/dts/qcom/qcs404-evb-4000.dtb
arch/arm64/boot/dts/qcom/qcs404.dtsi:261.38-310.5: Warning (resets_property):
/soc@0/remoteproc@b00000: Missing property '#reset-cells' in node
/soc@0/clock-controller@1800000 or bad phandle (referred from resets[0])
also defined at arch/arm64/boot/dts/qcom/qcs404-evb.dtsi:82.18-84.3
Signed-off-by: Andy Gross <agross@kernel.org>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel,
so can dismiss warning during initialisation.
Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel and
static replicator, so can dismiss warning during initialisation.
Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
CoreSight DT bindings have been updated, thus the old compatible strings
are obsolete and the drivers will report warning if DTS uses these
obsolete strings.
This patch switches to the new bindings for CoreSight dynamic funnel,
so can dismiss warning during initialisation.
Cc: Andy Gross <agross@kernel.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Andy Gross <agross@kernel.org>
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one
context (e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore,
the exception handler may resolve to the wrong address space.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJc+31MAAoJECIOw3kbKW7CTKcP/jda+jHCfNBfta23wGDhjjUK
77swcIQ77QEi507/NEWxE/leDkoedyIA6lLI6w2hcjm2sGBPndCJeoAiQfHA7Y5s
xX+zTDZBYbUyOCI3o+s0M5oCp3N1F3IyUXJqHIczN44IZOOYFsDkgxXam2rie7Xx
INwIoq1DsQGUYk4kkLY1eLjjwaEPo2I77rqS2mF8KyTskCZ6nMtULY+Cui9zIb3v
PLOKFRNY32OUIt+CjcAbb0bujjVETPuOs8cAK6ZOsZtM59o48iVphwxi1ZYGQlXd
0WNsBWCRKfknfLytm0R9TEfKn+CcG/rMtpv5GnOFa1aA4avl60eHgzPaWxz4JIjQ
Q/dkciM52D8MoY0od2QSZr4RXtdb+NYlvmjSSUJ0zjdbppmg5cCIc16FyDfuCn+y
b3+hrA+IcPBHP2JNp/GncV5SWHlrleCDoJyBYO+x1u9zeVFcivZSrzrbr5dhoRB/
cwy9/2hNquIS+/7CC0HajLnR5q8D5jG9lfKTY2ZaQGHEr98czgQCWsfqQm1rFU9S
BCOPkioGdhD3IpJyjOi4y02/0pvNCV6xEpcsMuotrnwm77+Qum0F6jb5wIsZsqAz
mUeBIxqsxhGo4V7CBGkzuweJU1Lv2Pev0E3HATdauyvbjjCQxx7ud9xUUx1sIHjJ
Je7l0Dn8xSWmXxUEWVAh
=8Ewa
-----END PGP SIGNATURE-----
Merge tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- fix stack unwinder: the stack unwinder rework has on off-by-one bug
which prevents following stack backchains over more than one context
(e.g. irq -> process).
- fix address space detection in exception handler: if user space
switches to access register mode, which is not supported anymore, the
exception handler may resolve to the wrong address space.
* tag 's390-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/unwind: correct stack switching during unwind
s390/mm: fix address space detection in exception handling
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXPtXKRUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2wxQD+NM+gBaLkqHO2VKGPeBgkenwG2ehK
rY4eeO+7/tMC7AsA/iFaSD3E8VZesao0tkYCC2lxl3o0avkzExwwkzbHAjsK
=3ysz
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
- Declare ginvt() __always_inline due to its use of an argument as an
inline asm immediate.
- A VDSO build fix following Kbuild changes made this cycle.
- A fix for boot failures on txx9 systems following memory
initialization changes made this cycle.
- Bounds check virt_addr_valid() to prevent it spuriously indicating
that bogus addresses are valid, in turn fixing hardened usercopy
failures that have been present since v4.12.
- Build uImage.gz for pistachio systems by default, since this is the
image we need in order to actually boot on a board.
- Remove an unused variable in our uprobes code.
* tag 'mips_fixes_5.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: uprobes: remove set but not used variable 'epc'
MIPS: pistachio: Build uImage.gz by default
MIPS: Make virt_addr_valid() return bool
MIPS: Bounds check virt_addr_valid
MIPS: TXx9: Fix boot crash in free_initmem()
MIPS: remove a space after -I to cope with header search paths for VDSO
MIPS: mark ginvt() as __always_inline
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Mostly due to x86 and acpi conversion, several documentation
links are still pointing to the old file. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This document is used by multiple architectures:
$ echo $(git grep -l pkey_mprotect arch|cut -d'/' -f 2|sort|uniq)
alpha arm arm64 ia64 m68k microblaze mips parisc powerpc s390 sh sparc x86 xtensa
So, let's move it to the core book and adjust the links to it
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The pfn and array files in (debugfs)/ras/cec are intended for debugging
the CEC code itself. They are not needed on production systems, so the
default setting for this CONFIG option is "n".
[ bp: Have it with less ifdeffery by using IS_ENABLED(). ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
This patch implements dynamic ftrace for PA-RISC. The required mcount
call sequences can get pretty long, so instead of patching the
whole call sequence out of the functions, we are using
-fpatchable-function-entry from gcc. This puts a configurable amount of
NOPS before/at the start of the function. Taking do_sys_open() as example,
which would look like this when the call is patched out:
1036b248: 08 00 02 40 nop
1036b24c: 08 00 02 40 nop
1036b250: 08 00 02 40 nop
1036b254: 08 00 02 40 nop
1036b258 <do_sys_open>:
1036b258: 08 00 02 40 nop
1036b25c: 08 03 02 41 copy r3,r1
1036b260: 6b c2 3f d9 stw rp,-14(sp)
1036b264: 08 1e 02 43 copy sp,r3
1036b268: 6f c1 01 00 stw,ma r1,80(sp)
When ftrace gets enabled for this function the kernel will patch these
NOPs to:
1036b248: 10 19 57 20 <address of ftrace>
1036b24c: 6f c1 00 80 stw,ma r1,40(sp)
1036b250: 48 21 3f d1 ldw -18(r1),r1
1036b254: e8 20 c0 02 bv,n r0(r1)
1036b258 <do_sys_open>:
1036b258: e8 3f 1f df b,l,n .-c,r1
1036b25c: 08 03 02 41 copy r3,r1
1036b260: 6b c2 3f d9 stw rp,-14(sp)
1036b264: 08 1e 02 43 copy sp,r3
1036b268: 6f c1 01 00 stw,ma r1,80(sp)
So the first NOP in do_sys_open() will be patched to jump backwards into
some minimal trampoline code which pushes a stackframe, saves r1 which
holds the return address, loads the address of the real ftrace function,
and branches to that location. For 64 Bit things are getting a bit more
complicated (and longer) because we must make sure that the address of
ftrace location is 8 byte aligned, and the offset passed to ldd for
fetching the address is 8 byte aligned as well.
Note that gcc has a bug which misplaces the function label, and needs a
patch to make dynamic ftrace work. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90751 for details.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Instead of using our own version, switch to the generic
pr_() calls.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Calling clear_fixmap() on an already cleared fixed mapping is
a bad thing to do. Add a WARN_ON() to catch such issues.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
If multiple CPUs are patching code we need the spinlock
to protect against parallel fixmap maps/unmap calls.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
add patch_text_multiple() which allows to patch multiple
text words in memory. This can be used to copy functions.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
In commit
39388e80f9 ("x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()")
I removed the statement
| if (ia32_fxstate)
| copy_fxregs_to_kernel(fpu);
and argued that it was wrongly merged because the content was already
saved in kernel's state.
This was wrong: It is required to write it back because it is only
saved on the user-stack and save_fsave_header() reads it from task's
FPU-state. I missed that part…
Save x87 FPU state unless thread's FPU registers are already up to date.
Fixes: 39388e80f9 ("x86/fpu: Don't save fxregs for ia32 frames in copy_fpstate_to_sigframe()")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190607142915.y52mfmgk5lvhll7n@linutronix.de
Daniel Borkmann says:
====================
pull-request: bpf 2019-06-07
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix several bugs in riscv64 JIT code emission which forgot to clear high
32-bits for alu32 ops, from Björn and Luke with selftests covering all
relevant BPF alu ops from Björn and Jiong.
2) Two fixes for UDP BPF reuseport that avoid calling the program in case of
__udp6_lib_err and UDP GRO which broke reuseport_select_sock() assumption
that skb->data is pointing to transport header, from Martin.
3) Two fixes for BPF sockmap: a use-after-free from sleep in psock's backlog
workqueue, and a missing restore of sk_write_space when psock gets dropped,
from Jakub and John.
4) Fix unconnected UDP sendmsg hook API which is insufficient as-is since it
breaks standard applications like DNS if reverse NAT is not performed upon
receive, from Daniel.
5) Fix an out-of-bounds read in __bpf_skc_lookup which in case of AF_INET6
fails to verify that the length of the tuple is long enough, from Lorenz.
6) Fix libbpf's libbpf__probe_raw_btf to return an fd instead of 0/1 (for
{un,}successful probe) as that is expected to be propagated as an fd to
load_sk_storage_btf() and thus closing the wrong descriptor otherwise,
from Michal.
7) Fix bpftool's JSON output for the case when a lookup fails, from Krzesimir.
8) Minor misc fixes in docs, samples and selftests, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a gpio_chip wants to request a descriptor from itself
using gpiochip_request_own_desc() it needs to be able to specify
fully how to use the descriptor, notably line inversion
semantics. The workaround in the gpiolib.c can be removed
and cases (such as SPI CS) where we need at times to request
a GPIO with line inversion semantics directly on a chip for
workarounds, can be fully supported with this call.
Fix up some users of the API that weren't really using the
last flag to set up the line as input or output properly
but instead just calling direction setting explicitly
after requesting the line.
Cc: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The size of the vmemmap section is hardcoded to 1 TB to support the
maximum amount of system RAM in 4-level paging mode - 64 TB.
However, 1 TB is not enough for vmemmap in 5-level paging mode. Assuming
the size of struct page is 64 Bytes, to support 4 PB system RAM in 5-level,
64 TB of vmemmap area is needed:
4 * 1000^5 PB / 4096 bytes page size * 64 bytes per page struct / 1000^4 TB = 62.5 TB.
This hardcoding may cause vmemmap to corrupt the following
cpu_entry_area section, if KASLR puts vmemmap very close to it and the
actual vmemmap size is bigger than 1 TB.
So calculate the actual size of the vmemmap region needed and then align
it up to 1 TB boundary.
In 4-level paging mode it is always 1 TB. In 5-level it's adjusted on
demand. The current code reserves 0.5 PB for vmemmap on 5-level. With
this change, the space can be saved and thus used to increase entropy
for the randomization.
[ bp: Spell out how the 64 TB needed for vmemmap is computed and massage commit
message. ]
Fixes: eedb92abb9 ("x86/mm: Make virtual memory layout dynamic for CONFIG_X86_5LEVEL=y")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill A. Shutemov <kirill@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: kirill.shutemov@linux.intel.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190523025744.3756-1-bhe@redhat.com
- fix section mismatch between memblock_reserve and mem_reserve. This
fixes tinyconfig xtensa builds.
-----BEGIN PGP SIGNATURE-----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=4yeH
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa
Pull xtensa fix from Max Filippov:
"Fix a section mismatch between memblock_reserve and mem_reserve.
This fixes tinyconfig xtensa builds"
* tag 'xtensa-20190607' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: Fix section mismatch between memblock_reserve and mem_reserve
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the "restore"
kernel), because memory mapping differences between the restore and
image kernels cause SMT siblings to be woken up from idle states
and subsequently they try to fetch instructions from incorrect
memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=r5bv
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash during resume from hibernation introduced during the
4.19 cycle, cause the new Performance and Energy Bias Hint (EPB) code
to be built only if CONFIG_PM is set and add a few missing kerneldoc
comments.
Specifics:
- Fix a crash that occurs when a kernel with 'nosmt' in the command
line is used to resume the system from hibernation (as the
"restore" kernel), because memory mapping differences between the
restore and image kernels cause SMT siblings to be woken up from
idle states and subsequently they try to fetch instructions from
incorrect memory locations (Jiri Kosina).
- Cause the new Performance and Energy Bias Hint (EPB) code to be
built only if CONFIG_PM is set, because that code is not really
necessary otherwise (Rafael Wysocki).
- Add kerneldoc comments to documents some helper functions related
to system-wide suspend to avoid possible confusion regarding their
purpose (Rafael Wysocki)"
* tag 'pm-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
PM: sleep: Add kerneldoc comments to some functions
x86: intel_epb: Do not build when CONFIG_PM is unset
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
Fixes: 670f928ba0 ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some ISDN files that got removed in net-next had some changes
done in mainline, take the removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a couple of s/poped/popped/ typos.
Signed-off-by: George G. Davis <george_davis@mentor.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- Fix boot crash on platforms with SVE2 due to missing register encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlz6QlIACgkQt6xw3ITB
YzQJRAf/e2PwVOHLwUIbPg//rKKNlJmBMnIUROEiAPjY7atTfjuYd3/65pIq7ZuO
RjMIUT1A2kg+pMOFzmXObLICq3Xl1/7LUUPIQ1iDvEeWIRb7HKQXoJkg9lvUEy89
T4sR1EBkK7uYh0w+/L7k1LESGgl4+VFY/ZY+4NmwsXEK4jfty3by7zE7Vy35MvQ6
XuEbYuMNjfskgBGbZPVqV8qHUlRurfhWWXjdgdAe9E7+fsHPuOrIr4+uXwAyVtRR
1/4tLySNW2GE8o0Ftun82ZasFTTgPc18ozASBYX1FMlQRaXznNREmSHYaIiartJE
VorEdRe25ztdI54fVM2dL0KKmTZi1g==
=ErME
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another round of mostly-benign fixes, the exception being a boot crash
on SVE2-capable CPUs (although I don't know where you'd find such a
thing, so maybe it's benign too).
We're in the process of resolving some big-endian ptrace breakage, so
I'll probably have some more for you next week.
Summary:
- Fix boot crash on platforms with SVE2 due to missing register
encoding
- Fix architected timer accessors when CONFIG_OPTIMIZE_INLINING=y
- Move cpu_logical_map into smp.h for use by upcoming irqchip drivers
- Trivial typo fix in comment
- Disable some useless, noisy warnings from GCC 9"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Silence gcc warnings about arch ABI drift
ARM64: trivial: s/TIF_SECOMP/TIF_SECCOMP/ comment typo fix
arm64: arch_timer: mark functions as __always_inline
arm64: smp: Moved cpu_logical_map[] to smp.h
arm64: cpufeature: Fix missing ZFR0 in __read_sysreg_by_encoding()
__do_page_fault() is over complicated with multiple goto statements. This
cleans up the code flow and while there drops local variable vm_fault_t.
Reviewed-by: Mark Rutland <Mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch adds an is_write_abort() wrapper and documents the detection
of the abort type on cache maintenance operations.
Cc: Will Deacon <will.deacon@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[catalin.marinas@arm.com: only keep the is_write_abort() wrapper]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Adjust conditions in on_stack function. That fixes backchain unwinder
which was unable to read pt_regs at the very bottom of the stack and
hence couldn't follow stacks (e.g. from async stack to a task stack).
Fixes: 78c98f9074 ("s390/unwind: introduce stack unwind API")
Reported-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The config value used in the if was changed in
b433dce056, but the comment on the
corresponding end was not changed.
Signed-off-by: Odin Ugedal <odin@ugedal.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When booting through OF, setup_disp_bat() does nothing because
disp_BAT are not set. By change, it used to work because BOOTX
buffer is mapped 1:1 at address 0x81000000 by the bootloader, and
btext_setup_display() sets virt addr same as phys addr.
But since commit 215b823707 ("powerpc/32s: set up an early static
hash table for KASAN."), a temporary page table overrides the
bootloader mapping.
This 0x81000000 is also problematic with the newly implemented
Kernel Userspace Access Protection (KUAP) because it is within user
address space.
This patch fixes those issues by properly setting disp_BAT through
a call to btext_prepare_BAT(), allowing setup_disp_bat() to
properly setup BAT3 for early bootx screen buffer access.
Reported-by: Mathieu Malaterre <malat@debian.org>
Fixes: 215b823707 ("powerpc/32s: set up an early static hash table for KASAN.")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
