To prevent verifying the kernel module appended signature
twice (finit_module), once by the module_sig_check() and again by IMA,
powerpc secure boot rules define an IMA architecture specific policy
rule only if CONFIG_MODULE_SIG_FORCE is not enabled. This,
unfortunately, does not take into account the ability of enabling
"sig_enforce" on the boot command line (module.sig_enforce=1).
Including the IMA module appraise rule results in failing the
finit_module syscall, unless the module signing public key is loaded
onto the IMA keyring.
This patch fixes secure boot policy rules to be based on
CONFIG_MODULE_SIG instead.
Fixes: 4238fad366 ("powerpc/ima: Add support to initialize ima policy rules")
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/1588342612-14532-1-git-send-email-nayna@linux.ibm.com
Declare PSCI v1.0 support instead of v0.1 as the former is supported
by the PSCI firmware stacks stm32mp15x relies on.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Update intel-dspcfg with FLAG_SST_ONLY_IF_DMIC option and use it for
Skylake and Kabylake platforms when DMIC is present.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200506203951.6369-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccinelle warning:
sound/drivers/portman2x4.c:460:34-35: WARNING: sum of probable bitmasks, consider |
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588834135-14842-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccinelle warnings:
sound/ppc/pmac.c:729:57-58: WARNING: sum of probable bitmasks, consider |
sound/ppc/pmac.c:229:37-38: WARNING: sum of probable bitmasks, consider |
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1588823647-12480-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use _inX() and _outX(), which include memory barriers which may be
overridden per arch.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Macro argument "bw" is used for building byte, word, and long-based
functions. Use "bwl" instead, to include long.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Since commit a7851aa54c ("io: change outX() to have their own IO barrier
overrides") and commit 87fe2d543f ("io: change inX() to have their own
IO barrier overrides"), the outX and inX functions have memory barriers
which can be overridden.
However, the generic logic_pio lib has continued to use readl/writel et al
for IO port accesses, which has weaker barriers on arm64.
Provide generic _inX() and _outX(), which can be used by logic pio.
For consistency, we check for !defined({in,out}X) && !defined(_{in,out}X),
for defining _{in,out}X, while a check for just !defined({in,out}X) should
suffice.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Currently we check to make sure there is no error state on the extcon
handle for VBUS when writing to the HS_PHY_GENCONFIG_2 register. When using
the USB role-switch API we still need to write to this register absent an
extcon handle.
This patch makes the appropriate update to ensure the write happens if
role-switching is true.
Fixes: 05559f10ed ("usb: chipidea: add role switch class support")
Cc: stable <stable@vger.kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200507004918.25975-2-peter.chen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds in CTI device tree information for the Hikey620 board.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Aux table invalidation can fail on update. So
next access may cause memory access to be into stale entry.
Proposed workaround is to invalidate entries between
all batchbuffers.
v2: correct register address (Yang)
v3: respect the order (Chris)
References bspec#43904, hsdes#1809175790
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chuansheng Liu <chuansheng.liu@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Yang A Shi <yang.a.shi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506165310.1239-1-mika.kuoppala@linux.intel.com
HDC pipeline flush is bit on the first dword of
the PIPE_CONTROL, not the second. Make it so.
v2: function naming (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200506144734.29297-2-mika.kuoppala@linux.intel.com
The driver has to be manually loaded if it is built as a module. It
is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover,
no platform-device is created (and thus no uevent is sent) for the
clockgen nodes it depends on.
Convert the module to a platform driver with its own alias. Moreover,
drop whitelisted SOCs. Platform device will be created only for the
compatible platforms.
Reviewed-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cadence SALVO PHY is a 28nm product, and is only used for USB3 & USB2.
According to the Cadence, this PHY is a legacy Module, and Sierra and
Torrent are later evolutions from it, and their sequence overlap is
minimal, meaning we cannot reuse either (Sierra & Torrent) of the PHY
drivers.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add Cadence SALVO PHY binding doc, this PHY is a legacy module,
and is only used for USB3 and USB2.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Pull networking fixes from David Miller:
1) Fix reference count leaks in various parts of batman-adv, from Xiyu
Yang.
2) Update NAT checksum even when it is zero, from Guillaume Nault.
3) sk_psock reference count leak in tls code, also from Xiyu Yang.
4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in
fq_codel, from Eric Dumazet.
5) Fix panic in choke_reset(), also from Eric Dumazet.
6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan.
7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet.
8) Fix crash in x25_disconnect(), from Yue Haibing.
9) Don't pass pointer to local variable back to the caller in
nf_osf_hdr_ctx_init(), from Arnd Bergmann.
10) Wireguard should use the ECN decap helper functions, from Toke
Høiland-Jørgensen.
11) Fix command entry leak in mlx5 driver, from Moshe Shemesh.
12) Fix uninitialized variable access in mptcp's
subflow_syn_recv_sock(), from Paolo Abeni.
13) Fix unnecessary out-of-order ingress frame ordering in macsec, from
Scott Dial.
14) IPv6 needs to use a global serial number for dst validation just
like ipv4, from David Ahern.
15) Fix up PTP_1588_CLOCK deps, from Clay McClure.
16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from
Yoshiyuki Kurauchi.
17) Fix a regression in that dsa user port errors should not be fatal,
from Florian Fainelli.
18) Fix iomap leak in enetc driver, from Dejin Zheng.
19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang.
20) Initialize protocol value earlier in neigh code paths when
generating events, from Roman Mashak.
21) netdev_update_features() must be called with RTNL mutex in macsec
driver, from Antoine Tenart.
22) Validate untrusted GSO packets even more strictly, from Willem de
Bruijn.
23) Wireguard decrypt worker needs a cond_resched(), from Jason
Donenfeld.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE
MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order
wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing
wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning
wireguard: send/receive: cond_resched() when processing worker ringbuffers
wireguard: socket: remove errant restriction on looping to self
wireguard: selftests: use normal kernel stack size on ppc64
net: ethernet: ti: am65-cpsw-nuss: fix irqs type
ionic: Use debugfs_create_bool() to export bool
net: dsa: Do not leave DSA master with NULL netdev_ops
net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred
net: stricter validation of untrusted gso packets
seg6: fix SRH processing to comply with RFC8754
net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms
net: dsa: ocelot: the MAC table on Felix is twice as large
net: dsa: sja1105: the PTP_CLK extts input reacts on both edges
selftests: net: tcp_mmap: fix SO_RCVLOWAT setting
net: hsr: fix incorrect type usage for protocol variable
net: macsec: fix rtnl locking issue
net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()
...
Only the pinmux was selected, not the pinconf, leading to spi issues.
Increase drive strength so that max speed (25Mhz) can be achieved.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds FLOW_ACTION_HW_STATS_DONT_CARE which tells the driver
that the frontend does not need counters, this hw stats type request
never fails. The FLOW_ACTION_HW_STATS_DISABLED type explicitly requests
the driver to disable the stats, however, if the driver cannot disable
counters, it bails out.
TCA_ACT_HW_STATS_* maintains the 1:1 mapping with FLOW_ACTION_HW_STATS_*
except by disabled which is mapped to FLOW_ACTION_HW_STATS_DISABLED
(this is 0 in tc). Add tc_act_hw_stats() to perform the mapping between
TCA_ACT_HW_STATS_* and FLOW_ACTION_HW_STATS_*.
Fixes: 319a1d1947 ("flow_offload: check for basic action hw stats type")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 9b038086f0 ("docs: networking: convert DIM to RST") added a new
file entry to DYNAMIC INTERRUPT MODERATION to the end, and not following
alphabetical order.
So, ./scripts/checkpatch.pl -f MAINTAINERS complains:
WARNING: Misordered MAINTAINERS entry - list file patterns in alphabetic
order
#5966: FILE: MAINTAINERS:5966:
+F: lib/dim/
+F: Documentation/networking/net_dim.rst
Reorder the file entries to keep MAINTAINERS nicely ordered.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld says:
====================
wireguard fixes for 5.7-rc5
With Ubuntu and Debian having backported this into their kernels, we're
finally seeing testing from places we hadn't seen prior, which is nice.
With that comes more fixes:
1) The CI for PPC64 was running with extremely small stacks for 64-bit,
causing spurious crashes in surprising places.
2) There's was an old leftover routing loop restriction, which no longer
makes sense given the queueing architecture, and was causing problems
for people who really did want nested routing.
3) Not yielding our kthread on CONFIG_PREEMPT_VOLUNTARY systems caused
RCU stalls and other issues, reported by Wang Jian, with the fix
suggested by Sultan Alsawaf.
4) Clang spewed warnings in a selftest for CONFIG_IPV6=n, reported by
Arnd Bergmann.
5) A complicated if statement was simplified to an assignment while also
making the likely/unlikely hinting more correct and simple, and
increasing readability, suggested by Sultan.
Patches (2) and (3) have Fixes: lines and are probably good candidates
for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's very unlikely that send will become true. It's nearly always false
between 0 and 120 seconds of a session, and in most cases becomes true
only between 120 and 121 seconds before becoming false again. So,
unlikely(send) is clearly the right option here.
What happened before was that we had this complex boolean expression
with multiple likely and unlikely clauses nested. Since this is
evaluated left-to-right anyway, the whole thing got converted to
unlikely. So, we can clean this up to better represent what's going on.
The generated code is the same.
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without setting these to NULL, clang complains in certain
configurations that have CONFIG_IPV6=n:
In file included from drivers/net/wireguard/ratelimiter.c:223:
drivers/net/wireguard/selftest/ratelimiter.c:173:34: error: variable 'skb6' is uninitialized when used here [-Werror,-Wuninitialized]
ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
^~~~
drivers/net/wireguard/selftest/ratelimiter.c:123:29: note: initialize the variable 'skb6' to silence this warning
struct sk_buff *skb4, *skb6;
^
= NULL
drivers/net/wireguard/selftest/ratelimiter.c:173:40: error: variable 'hdr6' is uninitialized when used here [-Werror,-Wuninitialized]
ret = timings_test(skb4, hdr4, skb6, hdr6, &test_count);
^~~~
drivers/net/wireguard/selftest/ratelimiter.c:125:22: note: initialize the variable 'hdr6' to silence this warning
struct ipv6hdr *hdr6;
^
We silence this warning by setting the variables to NULL as the warning
suggests.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Users with pathological hardware reported CPU stalls on CONFIG_
PREEMPT_VOLUNTARY=y, because the ringbuffers would stay full, meaning
these workers would never terminate. That turned out not to be okay on
systems without forced preemption, which Sultan observed. This commit
adds a cond_resched() to the bottom of each loop iteration, so that
these workers don't hog the core. Note that we don't need this on the
napi poll worker, since that terminates after its budget is expended.
Suggested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reported-by: Wang Jian <larkwang@gmail.com>
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's already possible to create two different interfaces and loop
packets between them. This has always been possible with tunnels in the
kernel, and isn't specific to wireguard. Therefore, the networking stack
already needs to deal with that. At the very least, the packet winds up
exceeding the MTU and is discarded at that point. So, since this is
already something that happens, there's no need to forbid the not very
exceptional case of routing a packet back to the same interface; this
loop is no different than others, and we shouldn't special case it, but
rather rely on generic handling of loops in general. This also makes it
easier to do interesting things with wireguard such as onion routing.
At the same time, we add a selftest for this, ensuring that both onion
routing works and infinite routing loops do not crash the kernel. We
also add a test case for wireguard interfaces nesting packets and
sending traffic between each other, as well as the loop in this case
too. We make sure to send some throughput-heavy traffic for this use
case, to stress out any possible recursion issues with the locks around
workqueues.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While at some point it might have made sense to be running these tests
on ppc64 with 4k stacks, the kernel hasn't actually used 4k stacks on
64-bit powerpc in a long time, and more interesting things that we test
don't really work when we deviate from the default (16k). So, we stop
pushing our luck in this commit, and return to the default instead of
the minimum.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
eventfd is using ->read() as it's file_operations read handler, but
this prevents passing in information about whether a given IO operation
is blocking or not. We can only use the file flags for that. To support
async (-EAGAIN/poll based) retries for io_uring, we need ->read_iter()
support. Convert eventfd to using ->read_iter().
With ->read_iter(), we can support IOCB_NOWAIT. Ensure the fd setup
is done such that we set file->f_mode with FMODE_NOWAIT.
[missing include added]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We need to keep the reference to the drm_gem_object
until the last access by vkms_dumb_create.
Therefore, the put the object after it is used.
This fixes a use-after-free issue reported by syzbot.
While here, change vkms_gem_create() symbol to static.
Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
This patch proposes a change in the behavior of the cursor to enable it as
soon as the vkms module is added. Enabling the cursor by default appears
to be an expected and more friendly behavior, especially when running IGT
tests.
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200321203740.pg3r7f4vybruowox@smtp.gmail.com
Interrupts that use fast_interrupt_return actually do lock AMR, but
they have been ones which tend to come from userspace (or kernel bugs)
in radix mode. With kuap on hash, segment interrupts are taken in
kernel often, which quickly breaks due to the missing restore.
Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200429065654.1677541-6-npiggin@gmail.com
The K3 INTA driver, which is source TX/RX IRQs for CPSW NUSS, defines IRQs
triggering type as EDGE by default, but triggering type for CPSW NUSS TX/RX
IRQs has to be LEVEL as the EDGE triggering type may cause unnecessary IRQs
triggering and NAPI scheduling for empty queues. It was discovered with
RT-kernel.
Fix it by explicitly specifying CPSW NUSS TX/RX IRQ type as
IRQF_TRIGGER_HIGH.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The addition of sja1105_port_status_ether structure into the
statistics causes the frame size to go over the warning limit:
drivers/net/dsa/sja1105/sja1105_ethtool.c:421:6: error: stack frame size of 1104 bytes in function 'sja1105_get_ethtool_stats' [-Werror,-Wframe-larger-than=]
Use dynamic allocation to avoid this.
Fixes: 336aa67bd0 ("net: dsa: sja1105: show more ethtool statistics counters for P/Q/R/S")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently bool ionic_cq.done_color is exported using
debugfs_create_u8(), which requires a cast, preventing further compiler
checks.
Fix this by switching to debugfs_create_bool(), and dropping the cast.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleksij Rempel says:
====================
provide support for PHY master/slave configuration
changes v6:
- use NL_SET_ERR_MSG_ATTR in ethnl_update_linkmodes
- add sanity checks in the ioctl interface
- use bool for ethnl_validate_master_slave_cfg()
changes v5:
- set MASTER_SLAVE_CFG_UNSUPPORTED as default value
- send a netlink error message on validation error
- more code fixes
changes v4:
- rename port_mode to master_slave
- move validation code to net/ethtool/linkmodes.c
- add UNSUPPORTED state and avoid sending unsupported fields
- more formatting and naming fixes
- tja11xx: support only force mode
- tja11xx: mark state as unsupported
changes v3:
- provide separate field for config and state.
- make state rejected on set
- add validation
changes v2:
- change names. Use MASTER_PREFERRED instead of MULTIPORT
- configure master/slave only on request. Default configuration can be
provided by PHY or eeprom
- status and configuration to the user space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TJA11xx PHYs have a vendor specific Master/Slave configuration bit,
which is not compatible with IEEE 803.2-2018 spec for 100Base-T1
devices. So, provide a custom config_ange call back to solve this
problem.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This UAPI is needed for BroadR-Reach 100BASE-T1 devices. Due to lack of
auto-negotiation support, we needed to be able to configure the
MASTER-SLAVE role of the port manually or from an application in user
space.
The same UAPI can be used for 1000BASE-T or MultiGBASE-T devices to
force MASTER or SLAVE role. See IEEE 802.3-2018:
22.2.4.3.7 MASTER-SLAVE control register (Register 9)
22.2.4.3.8 MASTER-SLAVE status register (Register 10)
40.5.2 MASTER-SLAVE configuration resolution
45.2.1.185.1 MASTER-SLAVE config value (1.2100.14)
45.2.7.10 MultiGBASE-T AN control 1 register (Register 7.32)
The MASTER-SLAVE role affects the clock configuration:
-------------------------------------------------------------------------------
When the PHY is configured as MASTER, the PMA Transmit function shall
source TX_TCLK from a local clock source. When configured as SLAVE, the
PMA Transmit function shall source TX_TCLK from the clock recovered from
data stream provided by MASTER.
iMX6Q KSZ9031 XXX
------\ /-----------\ /------------\
| | | | |
MAC |<----RGMII----->| PHY Slave |<------>| PHY Master |
|<--- 125 MHz ---+-<------/ | | \ |
------/ \-----------/ \------------/
^
\-TX_TCLK
-------------------------------------------------------------------------------
Since some clock or link related issues are only reproducible in a
specific MASTER-SLAVE-role, MAC and PHY configuration, it is beneficial
to provide generic (not 100BASE-T1 specific) interface to the user space
for configuration flexibility and trouble shooting.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devulapally Shiva Krishna says:
====================
Crypto/chcr: Fix issues regarding algorithm implementation in driver
The following series of patches fixes the issues which came during
self-tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
Patch 1: Fixes gcm(aes) hang issue and rfc4106-gcm encryption issue.
Patch 2: Fixes ctr, cbc, xts and rfc3686-ctr extra test failures.
Patch 3: Fixes ccm(aes) extra test failures.
Patch 4: Added support for 48 byte-key_len in aes_xts.
Patch 5: fix for hmac(sha) extra test failure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The hmac(sha) test fails for a zero length source text data.
For hmac(sha) minimum length of the data must be of block-size.
So fix this by including the data_len for the last block.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added support for 48 byte key length for aes-xts.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ccm(aes) test fails when req->assoclen > ~240bytes.
The problem is the value assigned to auth_offset is wrong.
As auth_offset is unsigned char, it can take max value as 255.
So fix it by making it unsigned int.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This solves the following issues observed during self test when
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is enabled.
1. Added fallback for cbc, ctr and rfc3686 if req->nbytes is zero
and for xts added a fallback case if req->nbytes is not multiple of 16.
2. In case of cbc-aes, solved wrong iv update. When
chcr_cipher_fallback() is called, used req->info pointer instead of
reqctx->iv.
3. In cbc-aes decryption there was a wrong result. This occurs when
chcr_cipher_fallback() is called from chcr_handle_cipher_resp().
In the fallback function iv(req->info) used is wrongly updated.
So use the initial iv for this case.
4)In case of ctr-aes encryption observed wrong result. In adjust_ctr_overflow()
there is condition which checks if ((bytes / AES_BLOCK_SIZE) > c),
where c is the number of blocks which can be processed without iv overflow,
but for the above bytes (req->nbytes < 32 , not a multiple of 16) this
condition fails and the 2nd block is corrupted as it requires the rollover iv.
So added a '=' condition in this to take care of this.
5)In rfc3686-ctr there was wrong result observed. This occurs when
chcr_cipher_fallback() is called from chcr_handle_cipher_resp().
Here also copying initial_iv in init_iv pointer for handling the fallback
case correctly.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes two issues observed during self tests with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled.
1. gcm(aes) hang issue , that happens during decryption.
2. rfc4106-gcm-aes-chcr encryption unexpectedly succeeded.
For gcm-aes decryption , authtag is not mapped due to
sg_nents_for_len(upto size: assoclen+ cryptlen - authsize).
So fix it by dma_mapping authtag.
Also replaced sg_nents() to sg_nents_for_len() in case of aead_dma_unmap().
For rfc4106-gcm-aes-chcr, used crypto_ipsec_check_assoclen() for checking
the validity of assoclen.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: kill endpoint stop workaround
It turns out that a workaround that performs a small DMA operation
between retried attempts to stop a GSI channel is not needed for any
supported hardware. The hardware quirk that required the extra DMA
operation was fixed after IPA v3.1. So this series gets rid of that
workaround code, along with some other code that was only present to
support it.
NOTE: This series depends on (and includes/duplicates) another patch
that has already been committed in the net tree:
713b6ebb4c net: ipa: fix a bug in ipa_endpoint_stop()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent commit removed the only use of ipa_cmd_dma_task_32b_addr_add().
This function (and the IPA immediate command it implements) is no
longer needed, so get rid of it, along with all of the definitions
associated with it. Isolate its removal in a commit so it can be
easily added back again if needed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit made ipa_endpoint_stop() be a trivial wrapper
around gsi_channel_stop(). Since it no longer does anything
special, just open-code it in the three places it's used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only reason ipa_endpoint_stop() had a retry loop was that the
just-removed workaround required an IPA DMA command to occur between
attempts. The gsi_channel_stop() call that implements the stop does
its own retry loop, to cover a channel's transition from started to
stop-in-progress to stopped state.
Get rid of the unnecessary retry loop in ipa_endpoint_stop().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
