Declaring the struct packed here is mostly harmless,
but gives a bad example for people to copy.
As the struct is packed and aligned manually,
let's just drop the attribute.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This patch adds IRQ support for the virtio GPIO driver. Note that this
uses the irq_bus_lock/unlock() callbacks, since those operations over
virtio may sleep.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files
and scripts from Mauro. We are almost at the place where we
can properly check that the running kernel's sysfs abi is
documented fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPbjQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ync9gCfXKMUI1GAnCfJWAwTdTcd18q5akoAoMw32/AH
0yh5TjAWFyFd7xz5d7qs
=itsC
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 5.16-rc1.
All of these have been in linux-next for a while now with no reported
problems.
Included in here are:
- big update and cleanup of the sysfs abi documentation files and
scripts from Mauro. We are almost at the place where we can
properly check that the running kernel's sysfs abi is documented
fully.
- firmware loader updates
- dyndbg updates
- kernfs cleanups and fixes from Christoph
- device property updates
- component fix
- other minor driver core cleanups and fixes"
* tag 'driver-core-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (122 commits)
device property: Drop redundant NULL checks
x86/build: Tuck away built-in firmware under FW_LOADER
vmlinux.lds.h: wrap built-in firmware support under FW_LOADER
firmware_loader: move struct builtin_fw to the only place used
x86/microcode: Use the firmware_loader built-in API
firmware_loader: remove old DECLARE_BUILTIN_FIRMWARE()
firmware_loader: formalize built-in firmware API
component: do not leave master devres group open after bind
dyndbg: refine verbosity 1-4 summary-detail
gpiolib: acpi: Replace custom code with device_match_acpi_handle()
i2c: acpi: Replace custom function with device_match_acpi_handle()
driver core: Provide device_match_acpi_handle() helper
dyndbg: fix spurious vNpr_info change
dyndbg: no vpr-info on empty queries
dyndbg: vpr-info on remove-module complete, not starting
device property: Add missed header in fwnode.h
Documentation: dyndbg: Improve cli param examples
dyndbg: Remove support for ddebug_query param
dyndbg: make dyndbg a known cli param
dyndbg: show module in vpr-info in dd-exec-queries
...
Mark of the Unicorn (MOTU) shipped Traveler mk3 as one of models in third
generation of its FireWire series, and discontinued it already. The model
consists of below ICs:
* Texas Instruments TSB41AB2
* Phillips Semiconductors PDI1394L40
* Altera cyclone EP1C3
* Texas Instruments TMS320VC5402
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and whether to enable ADAT channels in rx/tx packets. The model supports
transmission of PCM frames as well as MIDI messages.
The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.
This commit adds support for it.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0410af0a bus_info_length 4, crc_length 16, crc 44810
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 00090911 device_id 0000090911 | EUI-64 0001f20000090911
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 00031733 directory_length 3, crc 5939
42c 120001f2 specifier id
430 1300001b version
434 17102800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 00028484 leaf_length 2, crc 33924
43c 0001f200 company_id 0001f2 |
440 00090911 device_id 0000090911 | EUI-64 0001f20000090911
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211104110627.94469-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage,
reviewed and acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by
the hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in
arm64 for allmodconfig, but that change is on its way through
the drm tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPX2A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymUUgCbB4EKysgLuXYdjUalZDx+vvZO4k0AniS14O4k
F+2dVSZ5WX6wumUzCaA6
=bXQM
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char and misc and other tiny driver subsystem
updates for 5.16-rc1.
Loads of things in here, all of which have been in linux-next for a
while with no reported problems (except for one called out below.)
Included are:
- habanana labs driver updates, including dma_buf usage, reviewed and
acked by the dma_buf maintainers
- iio driver update (going through this tree not staging as they
really do not belong going through that tree anymore)
- counter driver updates
- hwmon driver updates that the counter drivers needed, acked by the
hwmon maintainer
- xillybus driver updates
- binder driver updates
- extcon driver updates
- dma_buf module namespaces added (will cause a build error in arm64
for allmodconfig, but that change is on its way through the drm
tree)
- lkdtm driver updates
- pvpanic driver updates
- phy driver updates
- virt acrn and nitr_enclaves driver updates
- smaller char and misc driver updates"
* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (386 commits)
comedi: dt9812: fix DMA buffers on stack
comedi: ni_usb6501: fix NULL-deref in command paths
arm64: errata: Enable TRBE workaround for write to out-of-range address
arm64: errata: Enable workaround for TRBE overwrite in FILL mode
coresight: trbe: Work around write to out of range
coresight: trbe: Make sure we have enough space
coresight: trbe: Add a helper to determine the minimum buffer size
coresight: trbe: Workaround TRBE errata overwrite in FILL mode
coresight: trbe: Add infrastructure for Errata handling
coresight: trbe: Allow driver to choose a different alignment
coresight: trbe: Decouple buffer base from the hardware base
coresight: trbe: Add a helper to pad a given buffer area
coresight: trbe: Add a helper to calculate the trace generated
coresight: trbe: Defer the probe on offline CPUs
coresight: trbe: Fix incorrect access of the sink specific data
coresight: etm4x: Add ETM PID for Kryo-5XX
coresight: trbe: Prohibit trace before disabling TRBE
coresight: trbe: End the AUX handle on truncation
coresight: trbe: Do not truncate buffer on IRQ
coresight: trbe: Fix handling of spurious interrupts
...
In some platforms the numa node numbers are not necessarily consecutive,
meaning that not all nodes from 0 to the value returned by numa_max_node()
are available on the system. Using node numbers which are not available
results on errors from libnuma such as:
---- IPv4 UDP ----
send node 0, receive socket 0
libnuma: Warning: Cannot read node cpumask from sysfs
./reuseport_bpf_numa: failed to pin to node: No such file or directory
Fix it by checking if the node number bit is set on numa_nodes_ptr, which
is defined on libnuma as "Set with all nodes the kernel has exposed to
userspace".
Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211101145317.286118-1-kleber.souza@canonical.com
Here is the big set of staging driver updates and cleanups for 5.16-rc1.
Overall we ended up removing a lot of code this time, a bit over 20,000
lines are now gone thanks to a lot of cleanup work by many developers.
Nothing huge in here functionality wise, just loads of cleanups:
- r8188eu driver major cleanups and removal of unused and dead
code
- wlan-ng minor cleanups
- fbtft driver cleanups
- most driver cleanups
- rtl8* drivers cleanups
- rts5208 driver cleanups
- vt6655 driver cleanups
- vc04_services drivers cleanups
- wfx cleanups on the way to almost getting this merged out of
staging (it's close!)
- tiny mips changes needed for the mt7621 drivers, they have
been acked by the respective subsystem maintainers to go
through this tree.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPZQQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yml9wCeJl83anYno0xh+UP6CsEkbe64VJEAoIEKyry/
tlUowcatxGfz3aYA1wTc
=FyAK
-----END PGP SIGNATURE-----
Merge tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates and cleanups for
5.16-rc1.
Overall we ended up removing a lot of code this time, a bit over
20,000 lines are now gone thanks to a lot of cleanup work by many
developers.
Nothing huge in here functionality wise, just loads of cleanups:
- r8188eu driver major cleanups and removal of unused and dead code
- wlan-ng minor cleanups
- fbtft driver cleanups
- most driver cleanups
- rtl8* drivers cleanups
- rts5208 driver cleanups
- vt6655 driver cleanups
- vc04_services drivers cleanups
- wfx cleanups on the way to almost getting this merged out of
staging (it's close!)
- tiny mips changes needed for the mt7621 drivers, they have been
acked by the respective subsystem maintainers to go through this
tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (622 commits)
staging: r8188eu: hal: remove goto statement and local variable
staging: rtl8723bs: hal remove the assignment to itself
staging: rtl8723bs: fix unmet dependency on CRYPTO for CRYPTO_LIB_ARC4
staging: vchiq_core: get rid of typedef
staging: fieldbus: anybus: reframe comment to avoid warning
staging: r8188eu: fix missing unlock in rtw_resume()
staging: r8188eu: core: remove the goto from rtw_IOL_accquire_xmit_frame
staging: r8188eu: core: remove goto statement
staging: vt6655: Rename `dwAL7230InitTable` array
staging: vt6655: Rename `dwAL2230PowerTable` array
staging: vt6655: Rename `dwAL7230InitTableAMode` array
staging: vt6655: Rename `dwAL7230ChannelTable2` array
staging: vt6655: Rename `dwAL7230ChannelTable1` array
staging: vt6655: Rename `dwAL7230ChannelTable0` array
staging: vt6655: Rename `dwAL2230ChannelTable1` array
staging: vt6655: Rename `dwAL2230ChannelTable0` array
staging: r8712u: fix control-message timeout
staging: rtl8192u: fix control-message timeouts
staging: mt7621-dts: add missing SPDX license to files
staging: vchiq_core: fix quoted strings split across lines
...
Here is the big set of USB and Thunderbolt driver updates for 5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYPaPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylH3wCghhRCsLl5axOKdbkJO2ZUApR71DwAn2Vjwo2Y
Jgo6v3bVWWhL43YwCkf6
=UNgI
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
ext4_abort will eventually call ext4_errno_to_code, which translates the
errno to an EXT4_ERR specific error. This means that ext4_abort expects
an errno. By using EXT4_ERR_ here, it gets misinterpreted (as an errno),
and ends up saving EXT4_ERR_EBUSY on the superblock during an abort,
which makes no sense.
ESHUTDOWN will get properly translated to EXT4_ERR_SHUTDOWN, so use that
instead.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20211026173302.84000-1-krisman@collabora.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since there are no blocks in an inline data inode, there's no point in
fixing iblocks field in fast commit replay path for this inode.
Similarly, there's no point in fixing any block bitmaps / global block
counters with respect to such an inode. Just bail out from these
functions if an inline data inode is encountered.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-2-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the commit phase in fast commits if an inode with inline data
is being committed, also commit the inline data along with
inode. Since recovery code just blindly copies entire content found in
inode TLV, there is no change needed on the recovery path. Thus, this
change is backward compatiable.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20211015182513.395917-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As commit 6920b39132 ("ext4: add new helper interface
ext4_try_to_trim_range()") moves some code into the separate function
ext4_try_to_trim_range(), the use of the variable ret within that
function is more limited and can be adjusted as well.
Scope the use of the variable ret locally and drop dead assignments.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210820120853.23134-1-lukas.bulwahn@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'enable_quota' variable is only used in an CONFIG_QUOTA.
With CONFIG_QUOTA=n, compiler causes a harmless warning:
fs/ext4/super.c: In function ‘ext4_remount’:
fs/ext4/super.c:5840:6: warning: variable ‘enable_quota’ set but not used
[-Wunused-but-set-variable]
int enable_quota = 0;
^~~~~
Move 'enable_quota' into the same #ifdef CONFIG_QUOTA block
to remove an unused variable warning.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824034929.GA13415@raspberrypi
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return statements in functions returning bool should use true/false
instead of 1/0.
./fs/ext4/namei.c:1441:12-13:WARNING:return of 0/1 in function
'ext4_match' with return type bool
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210824055543.58718-1-deng.changcheng@zte.com.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In ext4_get_inode_loc(), we may skip IO and get an zero && uptodate
inode buffer when the inode monopolize an inode block for performance
reason. For most cases, ext4_mark_iloc_dirty() will fill the inode
buffer to make it fine, but we could miss this call if something bad
happened. Finally, __ext4_get_inode_loc_noinmem() may probably get an
empty inode buffer and trigger ext4 error.
For example, if we remove a nonexistent xattr on inode A,
ext4_xattr_set_handle() will return ENODATA before invoking
ext4_mark_iloc_dirty(), it will left an uptodate but zero buffer. We
will get checksum error message in ext4_iget() when getting inode again.
EXT4-fs error (device sda): ext4_lookup:1784: inode #131074: comm cat: iget: checksum invalid
Even worse, if we allocate another inode B at the same inode block, it
will corrupt the inode A on disk when write back inode B.
So this patch initialize the inode buffer by filling the in-mem inode
contents if we skip read I/O, ensure that the buffer is really uptodate.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In preparation for calling ext4_fill_raw_inode() in
__ext4_get_inode_loc(), move three related functions before
__ext4_get_inode_loc(), no logical change.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Factor out ext4_fill_raw_inode() from ext4_do_update_inode(), which is
use to fill the in-mem inode contents into the inode table buffer, in
preparation for initializing the exclusive inode buffer without reading
the block in __ext4_get_inode_loc().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210901020955.1657340-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In the most error path of current extents updating operations are not
roll back partial updates properly when some bad things happens(.e.g in
ext4_ext_insert_extent()). So we may get an inconsistent extents tree
if journal has been aborted due to IO error, which may probability lead
to BUGON later when we accessing these extent entries in errors=continue
mode. This patch drop extent buffer's verify flag before updatng the
contents in ext4_ext_get_access(), and reset it after updating in
__ext4_ext_dirty(). After this patch we could force to check the extent
buffer if extents tree updating was break off, make sure the extents are
consistent.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-4-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now that we can check out overlapping extents in leaf block and
out-of-order index extents in index block. But the .ee_block in the
first extent of one leaf block should equal to the .ei_block in it's
parent index extent entry. This patch add a check to verify such
inconsistent between the index and leaf block.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210908120850.4012324-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After commit 5946d08937 ("ext4: check for overlapping extents in
ext4_valid_extent_entries()"), we can check out the overlapping extent
entry in leaf extent blocks. But the out-of-order extent entry in index
extent blocks could also trigger bad things if the filesystem is
inconsistent. So this patch add a check to figure out the out-of-order
index extents and return error.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210908120850.4012324-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/1626674355-55795-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After we drop i_data sem, we need to reload the ext4_ext_path
structure since the extent tree can change once i_data_sem is
released.
This addresses the BUG:
[52117.465187] ------------[ cut here ]------------
[52117.465686] kernel BUG at fs/ext4/extents.c:1756!
...
[52117.478306] Call Trace:
[52117.478565] ext4_ext_shift_extents+0x3ee/0x710
[52117.479020] ext4_fallocate+0x139c/0x1b40
[52117.479405] ? __do_sys_newfstat+0x6b/0x80
[52117.479805] vfs_fallocate+0x151/0x4b0
[52117.480177] ksys_fallocate+0x4a/0xa0
[52117.480533] __x64_sys_fallocate+0x22/0x30
[52117.480930] do_syscall_64+0x35/0x80
[52117.481277] entry_SYSCALL_64_after_hwframe+0x44/0xae
[52117.481769] RIP: 0033:0x7fa062f855ca
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-4-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Like ext4_ext_rm_leaf, we can ensure that there are enough credits
before every call that will consume credits. As part of this fix we
fold the functionality of ext4_access_path() into
ext4_ext_shift_path_extents(). This change is needed as a preparation
for the next bugfix patch.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20210903062748.4118886-3-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The debuginfo for binsearch want to show the left/middle/right extent
while the process search for the goal block. However we show this info
after we change right or left.
Link: https://lore.kernel.org/r/20210903062748.4118886-2-yangerkun@huawei.com
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Ext4 file system has default lazy inode table initialization setup once
it is mounted. However, it has issue on computing the next schedule time
that makes the timeout same amount in jiffies but different real time in
secs if with various HZ values. Therefore, fix by measuring the current
time in a more granular unit nanoseconds and make the next schedule time
independent of the HZ value.
Fixes: bfff68738f ("ext4: add support for lazy inode table initialization")
Signed-off-by: Shaoying Xu <shaoyi@amazon.com>
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210902164412.9994-2-shaoyi@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 948ca5f30e.
Two crash reports from users running variations on 5.15-rc4 kernels
suggest that it is premature to enforce the state assertion in the
original commit. Both crashes were triggered by BUG calls in that
code, indicating that under some rare circumstance the buffer head
state did not match a delayed allocated block at the time the
block was written out. No reproducer is available. Resolving this
problem will require more time than remains in the current release
cycle, so reverting the original patch for the time being is necessary
to avoid any instability it may cause.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20211012171901.5352-1-enwlinux@gmail.com
Fixes: 948ca5f30e ("ext4: enforce buffer head state assertion in ext4_da_map_blocks")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
We already include <linux/device.h> and <linux/msi.h>, which
include <asm/device.h> and <asm/msi.h>.
Drop the redundant includes of <asm/device.h> and <asm/msi.h>.
[bhelgaas: squash in fix from Wan Jiabing <wanjiabing@vivo.com>:
https://lore.kernel.org/r/20211104063720.29375-1-wanjiabing@vivo.com]
Link: https://lore.kernel.org/r/20211013003145.1107148-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
The second parameter for snd_sof_ipc_set_get_comp_data() is ipc_cmd, not
ipc_ctrl_type and the type is u32.
Fixes: 756bbe4205 ("ASoC: SOF: Handle control change notification from firmware")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211103082710.17165-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This regression can be reproduced with ntfs-3g and overlayfs:
mkdir lower upper work overlay
dd if=/dev/zero of=ntfs.raw bs=1M count=2
mkntfs -F ntfs.raw
mount ntfs.raw lower
touch lower/file.txt
mount -t overlay -o lowerdir=lower,upperdir=upper,workdir=work - overlay
mv overlay/file.txt overlay/file2.txt
mv fails and (misleadingly) prints
mv: cannot move 'overlay/file.txt' to a subdirectory of itself, 'overlay/file2.txt'
The reason is that ovl_copy_fileattr() is triggered due to S_NOATIME being
set on all inodes (by fuse) regardless of fileattr.
ovl_copy_fileattr() tries to retrieve file attributes from lower file, but
that fails because filesystem does not support this ioctl (this should fail
with ENOTTY, but ntfs-3g return EINVAL instead). This failure is
propagated to origial operation (in this case rename) that triggered the
copy-up.
The fix is to ignore ENOTTY and EINVAL errors from fileattr_get() in copy
up. This also requires turning the internal ENOIOCTLCMD into ENOTTY.
As a further measure to prevent unnecessary failures, only try the
fileattr_get/set on upper if there are any flags to copy up.
Side note: a number of filesystems set S_NOATIME (and sometimes other inode
flags) irrespective of fileattr flags. This causes unnecessary calls
during copy up, which might lead to a performance issue, especially if
latency is high. To fix this, the kernel would need to differentiate
between the two cases. E.g. introduce SB_NOATIME_UPDATE, a per-sb variant
of S_NOATIME. SB_NOATIME doesn't work, because that's interpreted as
"filesystem doesn't store an atime attribute"
Reported-and-tested-by: Kevin Locke <kevin@kevinlocke.name>
Fixes: 72db82115d ("ovl: copy up sync/noatime fileattr flags")
Cc: <stable@vger.kernel.org> # v5.15
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The parameters to two functions and the location of a variable have
changed in more recent LLVM/clang releases.
Remove the unneecessary -fmessage-length and -ferror-limit flags, the
former causes failures like:
58: builtin clang support :
58.1: builtin clang compile C source to IR :
--- start ---
test child forked, pid 279307
error: unknown argument: '-fmessage-length'
1 error generated.
test child finished with -1
Tested with LLVM 6, 8, 9, 10 and 11.
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>,
Cc: llvm@lists.linux.dev
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LLVM 9 (current release is LLVM 13) moved the minimum C++ version to
GNU++14. Bump the version numbers in the feature test and perf build.
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20211012021321.291635-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The postclose handler can run after the device has been removed (or the
driver has been unbound) since userspace clients are free to hold the
file open as long as they want. Because the device removal callback
frees the entire nouveau_drm structure, any reference to it in the
postclose handler will result in a use-after-free.
To reproduce this, one must simply open the device file, unbind the
driver (or physically remove the device), and then close the device
file. This was found and can be reproduced easily with the IGT
core_hotunplug tests.
To avoid this, all clients are cleaned up in the device finalization
rather than deferring it to the postclose handler, and the postclose
handler is protected by a critical section which ensures the
drm_dev_unplug() and the postclose handler won't race.
This is not an ideal fix, since as I understand the proposed plan for
the kernel<->userspace interface for hotplug support, destroying the
client before the file is closed will cause problems. However, I believe
to properly fix this issue, the lifetime of the nouveau_drm structure
needs to be extended to match the drm_device, and this proved to be a
rather invasive change. Thus, I've broken this out so the fix can be
easily backported.
This fixes with the two previous commits CVE-2020-27820 (Karol).
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-4-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Sohaib Mohamed started a serie of tiny and incomplete checkpatch fixes but
seemingly stopped halfway -- take over and do most of it.
This is still missing net/9p/trans* and net/9p/protocol.c for a later
time...
Link: http://lkml.kernel.org/r/20211102134608.1588018-3-dominique.martinet@atmark-techno.com
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
having a readahead of 128k with a msize of 128k (with overhead) lead to
reading 124+4k everytime, making two roundtrips needlessly.
tune readahead according to msize when cache is enabled for better
performance
Link: http://lkml.kernel.org/r/20211104120323.2189376-1-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
We need to cleanup resources on the probe() callback registered
with __register_blkdev(), now that add_disk() error handling is
supported. Address this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-14-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We need to cleanup resources on the probe() callback registered
with __register_blkdev(), now that add_disk() error handling is
supported. Address this.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-13-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__register_blkdev() is used to register a probe callback, and
that callback is typically used to call add_disk(). Now that
we are able to capture errors for add_disk(), we need to fix
those probe calls where add_disk() fails and clean up resources.
We don't extend the probe call to return the error given:
1) we'd have to always special-case the case where the disk
was already present, as otherwise concurrent requests to
open an existing block device would fail, and this would be
a userspace visible change
2) the error from ilookup() on blkdev_get_no_open() is sufficient
3) The only thing the probe call is used for is to support
pre-devtmpfs, pre-udev semantics that want to create disks when
their pre-created device node is accessed, and so we don't care
for failures on probe there.
Expand documentation for the probe callback to ensure users cleanup
resources if add_disk() is used and to clarify this interface may be
removed in the future.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-12-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit bf9c0538e4 ("ataflop: use a separate gendisk for each media
format") introduced ataflop_probe_lock mutex, but forgot to unlock the
mutex when atari_floppy_init() (i.e. module loading) succeeded. This will
result in double lock deadlock if ataflop_probe() is called. Also,
unregister_blkdev() must not be called from atari_floppy_init() with
ataflop_probe_lock held when atari_floppy_init() failed, for
ataflop_probe() waits for ataflop_probe_lock with major_names_lock held
(i.e. AB-BA deadlock).
__register_blkdev() needs to be called last in order to avoid calling
ataflop_probe() when atari_floppy_init() is about to fail, for memory for
completing already-started ataflop_probe() safely will be released as soon
as atari_floppy_init() released ataflop_probe_lock mutex.
As with commit 8b52d8be86 ("loop: reorder loop_exit"),
unregister_blkdev() needs to be called first in order to avoid calling
ataflop_alloc_disk() from ataflop_probe() after del_gendisk() from
atari_floppy_exit().
By relocating __register_blkdev() / unregister_blkdev() as explained above,
we can remove ataflop_probe_lock mutex, for probe function and __exit
function are serialized by major_names_lock mutex.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: bf9c0538e4 ("ataflop: use a separate gendisk for each media format")
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20211103230437.1639990-11-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-10-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
We re-use the same free tag call, so we also add a label for
that as well.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-9-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling. Only the disk is cleaned up inside
z2ram_register_disk() as the caller deals with the rest.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-8-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that device_add_disk() supports returning an error, use
that. We must unwind alloc_dax() on error.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-7-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior to devm being able to use pmem_release_disk() there are other
failure which can occur for which we must account for and release the
disk for. Address those few cases.
Fixes: 3dd60fb9d9 ("nvdimm/pmem: stop using q_usage_count as external pgmap refcount")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-6-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since nvdimm/blk uses devm we just need to move the devm
registration towards the end. And in hindsight, that seems
to also provide a fix given del_gendisk() should not be
called unless the disk was already added via add_disk().
The probably of that issue happening is low though, like
OOM while calling devm_add_action(), so the fix is minor.
We manually unwind in case of add_disk() failure prior
to the devm registration.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-5-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If nd_integrity_init() fails we'd get del_gendisk() called,
but that's not correct as we should only call that if we're
done with device_add_disk(). Fix this by providing unwinding
prior to the devm call being registered and moving the devm
registration to the very end.
This should fix calling del_gendisk() if nd_integrity_init()
fails. I only spotted this issue through code inspection. It
does not fix any real world bug.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-4-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-3-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This will make it easier to share common error paths.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20211103230437.1639990-2-mcgrof@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The assignment and operation there will be overwritten later, so
it should be deleted.
The clang_analyzer complains as follows:
drivers/block/loop.c:2330:2 warning:
Value stored to 'err' is never read
change in v2:
Repair the sending email box
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211104064546.3074-1-luo.penghao@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In drbd_create_device(), the 'out_no_io_page' lable has called
blk_cleanup_disk() when return failed.
So remove the 'out_cleanup_disk' lable to avoid double free the
disk pointer.
Fixes: e92ab4eda5 ("drbd: add error handling support for add_disk()")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1636013229-26309-1-git-send-email-wubo40@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than protecting the nouveau_drm clients list with the lock within
the "client" nouveau_cli, add a dedicated lock to serialize access to
the list. This is both clearer and necessary to avoid lockdep being
upset with us when we need to iterate through all the clients in the
list and potentially lock their mutex, which is the same class as the
lock protecting the entire list.
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201125202648.5220-3-jcline@redhat.com
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
