- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)
-----BEGIN PGP SIGNATURE-----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=D1Jt
-----END PGP SIGNATURE-----
Merge tag 'nvme-5.16-2021-10-21' of git://git.infradead.org/nvme into for-5.16/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.16
- fix a multipath partition scanning deadlock (Hannes Reinecke)
- generate uevent once a multipath namespace is operational again
(Hannes Reinecke)
- support unique discovery controller NQNs (Hannes Reinecke)
- fix use-after-free when a port is removed (Israel Rukshin)
- clear shadow doorbell memory on resets (Keith Busch)
- use struct_size (Len Baker)
- add error handling support for add_disk (Luis Chamberlain)
- limit the maximal queue size for RDMA controllers (Max Gurtovoy)
- use a few more symbolic names (Max Gurtovoy)
- fix error code in nvme_rdma_setup_ctrl (Max Gurtovoy)
- add support for ->map_queues on FC (Saurav Kashyap)"
* tag 'nvme-5.16-2021-10-21' of git://git.infradead.org/nvme: (23 commits)
nvmet: use struct_size over open coded arithmetic
nvme: drop scan_lock and always kick requeue list when removing namespaces
nvme-pci: clear shadow doorbell memory on resets
nvme-rdma: fix error code in nvme_rdma_setup_ctrl
nvme-multipath: add error handling support for add_disk()
nvmet: use macro definitions for setting cmic value
nvmet: use macro definition for setting nmic value
nvme: display correct subsystem NQN
nvme: Add connect option 'discovery'
nvme: expose subsystem type in sysfs attribute 'subsystype'
nvmet: set 'CNTRLTYPE' in the identify controller data
nvmet: add nvmet_is_disc_subsys() helper
nvme: add CNTRLTYPE definitions for 'identify controller'
nvmet: make discovery NQN configurable
nvmet-rdma: implement get_max_queue_size controller op
nvmet: add get_max_queue_size op for controllers
nvme-rdma: limit the maximal queue size for RDMA controllers
nvmet-tcp: fix use-after-free when a port is removed
nvmet-rdma: fix use-after-free when a port is removed
nvmet: fix use-after-free when a port is removed
...
We switched to directly use dev_t to get block device, lookup changed the
meaning of use, now we fix this conflicting comment.
Fixes: 4e7b5671c6 ("block: remove i_bdev")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211021071344.1600362-1-liu.yun@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Variable is not used in functions, and its assignment is redundant too.
So it should be deleted. Also the inner-most set of parentheses is no
longer needed.
The clang_analyzer complains as follows:
drivers/cdrom/cdrom.c:877: warning:
Although the value stored to 'ret' is used in the enclosing expression,
the value is never actually read from 'ret'.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Link: https://lore.kernel.org/all/20211020024229.1036219-1-luo.penghao@zte.com.cn
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20211021074621.901-1-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since it is now possible for a tagset to share a single set of tags, the
iter function should not re-iter the tags for the count of #hw queues in
that case. Rather it should just iter once.
Fixes: e155b0c238 ("blk-mq: Use shared tags for shared sbitmap support")
Reported-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Kashyap Desai <kashyap.desai@broadcom.com>
Link: https://lore.kernel.org/r/1634550083-202815-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently the power consumption is based on the current OPP power
assuming the entire performance domain is fully loaded.
That gives very gross power estimation and we can do much better by
using the load to scale the power consumption.
Use the utilization to normalize and scale the power usage over the
max possible power.
Tested on a rock960 with 2 big CPUS, the power consumption estimation
conforms with the expected one.
Before this change:
~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000
After this change:
~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
1130000
~$ ~/dhrystone -t 2 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-5-daniel.lezcano@linaro.org
The dtpm framework provides an API to allocate a dtpm node. However
when a backend dtpm driver needs to allocate a dtpm node it must
define its own structure and store the pointer of this structure in
the private field of the dtpm structure.
It is more elegant to use the container_of macro and add the dtpm
structure inside the dtpm backend specific structure. The code will be
able to deal properly with the dtpm structure as a generic entity,
making all this even more self-encapsulated.
The dtpm_alloc() function does no longer make sense as the dtpm
structure will be allocated when allocating the device specific dtpm
structure. The dtpm_init() is provided instead.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-4-daniel.lezcano@linaro.org
The dtpm table is an array of pointers, that forces the user of the
table to define initdata along with the declaration of the table
entry. It is more efficient to create an array of dtpm structure, so
the declaration of the table entry can be done by initializing the
different fields.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-3-daniel.lezcano@linaro.org
In order to increase the self-encapsulation of the dtpm generic code,
the following changes are adding a power update ops to the dtpm
ops. That allows the generic code to call directly the dtpm backend
function to update the power values.
The power update function does compute the power characteristics when
the function is invoked. In the case of the CPUs, the power
consumption depends on the number of online CPUs. The online CPUs mask
is not up to date at CPUHP_AP_ONLINE_DYN state in the tear down
callback. That is the reason why the online / offline are at separate
state. As there is already an existing state for DTPM, this one is
only moved to the DEAD state, so there is no addition of new state
with these changes. The dtpm node is not removed when the cpu is
unplugged.
That simplifies the code for the next changes and results in a more
self-encapsulated code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-1-daniel.lezcano@linaro.org
DM&P devices were not being properly identified, which resulted in
unneeded Spectre/Meltdown mitigations being applied.
The manufacturer states that these devices execute always in-order and
don't support either speculative execution or branch prediction, so
they are not vulnerable to this class of attack. [1]
This is something I've personally tested by a simple timing analysis
on my Vortex86MX CPU, and can confirm it is true.
Add identification for some devices that lack the CPUID product name
call, so they appear properly on /proc/cpuinfo.
¹https://www.ssv-embedded.de/doks/infos/DMP_Ann_180108_Meltdown.pdf
[ bp: Massage commit message. ]
Signed-off-by: Marcos Del Sol Vives <marcos@orca.pet>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211017094408.1512158-1-marcos@orca.pet
The enetc driver does not implement .ndo_change_mtu, instead it
configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU]
statically to a large value during probe time.
The driver used to configure only the max SDU for traffic class 0, and
that was fine while the driver could only use traffic class 0. But with
the introduction of mqprio, sending a large frame into any other TC than
0 is broken.
This patch fixes that by replicating per traffic class the static
configuration done in enetc_configure_port_mac().
Fixes: cbe9e83594 ("enetc: Enable TC offloading with mqprio")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two counters named "MAC tx frames", one of them is actually
incorrect. The correct name for that counter should be "MAC tx error
frames", which is symmetric to the existing "MAC rx error frames".
Fixes: 16eb4c85c9 ("enetc: Add ethtool statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the SDM660 DT compatible and its resource structure in order
to support the Venus IP in SDM630, SDM636, SDM660 and SDA variants.
This SoC features Venus 4.4 (HFI3XX) with only one subcore, used
for both encoding and decoding, and switched on with one main and
one subcore dedicated GDSC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a schema description for the Venus video decoder/encoder IP
in SDM660.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In existing implementation, driver is freeing and un-mapping all the
decoded picture buffers(DPB) as part of dynamic resolution change(DRC)
handling. As a result, when firmware try to access the DPB buffer, from
previous sequence, SMMU context fault is seen due to the buffer being
already unmapped.
With this change, driver defines ownership of each DPB buffer. If a buffer
is owned by firmware, driver would skip from un-mapping the same.
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
According to stateful decoder docs a fatal failure of decoding
(and encoding) could be recover it by closing the corresponding
file handle and open new one or reinitialize decoding (and encoding)
by stop streaming on both queues. In order to satisfy this
requirement we add a mechanism ins sys_error_handler and
corresponding decoder and encoder drivers to wait for sys_error_done
waitqueue in reqbuf.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Check sys error flag for all hfi_session_xxx functions and
exit with EIO in case of an error.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make the sys_error flag an atomic bitops in order to avoid
locking in sys_error readers.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Tested-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the configuration for pm6350 regulators. The supplies are not known
so leave them out for now.
Additionally leave out configuration of smps3 - smps5 and ldo17 as these
are not configured in the downstream kernel and the type of them is not
known.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211007212444.328034-4-luca@z3ntu.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
Removing all linux/gpio.h and linux/of_gpio.h dependencies and replacing
them with the gpiod interface.
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Link: https://lore.kernel.org/r/YWxmL2baF5AdzyHv@fedora
Signed-off-by: Mark Brown <broonie@kernel.org>
After this driver was converted to gpiod, clang started warning:
vers/regulator/lp872x.c:689:57: error: implicit conversion from
enumeration type 'enum lp872x_dvs_state' to different enumeration type
'enum gpiod_flags' [-Werror,-Wenum-conversion]
dvs->gpio = devm_gpiod_get_optional(lp->dev, "ti,dvs", pinstate);
~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~
1 error generated.
lp872x_dvs_state was updated to have values from gpiod_flags but this is
not enough to avoid an implicit conversion warning from either GCC or
clang (although GCC enables this warning under -Wextra instead of -Wall
like clang so it is not seen under normal builds).
Eliminate lp872x_dvs_state in favor of using gpiod_flags everywhere so
that there is no more warning about an implicit conversion.
Fixes: 72bf80cf09 ("regulator: lp872x: replacing legacy gpio interface for gpiod")
Link: https://github.com/ClangBuiltLinux/linux/issues/1481
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211019004335.193492-1-nathan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
For dynamically enabled features it's required to get the features which
are enabled for that context when restoring from sigframe.
The same applies for all signal frame size calculations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/87ilxz5iew.ffs@tglx
Prepare for dynamically enabled states per task. The function needs to
retrieve the features and sizes which are valid in a fpstate
context. Retrieve them from fpstate.
Move the function declarations to the core header as they are not
required anywhere else.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.233529986@linutronix.de
When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Fixes: 52762fbd1c ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
With dynamically enabled features the copy function must know the features
and the size which is valid for the task. Retrieve them from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.181495492@linutronix.de
With dynamically enabled features the sigframe code must know the features
which are enabled for the task. Get them from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.077781448@linutronix.de
With variable feature sets XSAVE[S] requires to know the feature set for
which the buffer is valid. Retrieve it from fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145323.025695590@linutronix.de
Make use of fpstate::size in various places which require the buffer size
information for sanity checks or memcpy() sizing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.973518954@linutronix.de
Dave is already listed as x86/mm maintainer, has a profund knowledge
of the x86 architecture in general and a good taste in terms of kernel
programming in general.
Add him as a full x86 maintainer with all rights and duties.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/87zgr3flq7.ffs@tglx
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf, snprintf or sprintf makes more
sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Message-Id: <20211021110608.1060260-1-ye.guojin@zte.com.cn>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add state size and feature mask information to the fpstate container. This
will be used for runtime checks with the upcoming support for dynamically
enabled features and dynamically sized buffers. That avoids conditionals
all over the place as the required information is accessible for both
default and extended buffers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.921388806@linutronix.de
'vclock_index' is accessed from sysfs, it shouled be freed
in release function, so move it from ptp_clock_unregister()
to ptp_clock_release().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although if_info_size is assigned, it has not been used. And the variable
should also be deleted.
The clang_analyzer complains as follows:
net/core/rtnetlink.c:3806: warning:
Although the value stored to 'if_info_size' is used in the enclosing
expression, the value is never actually read from 'if_info_size'.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the rework, the statistics code always adds up the byte and packet
value(s). On 32bit architectures a seqcount_t is used in
gnet_stats_basic_sync to ensure that the 64bit values are not modified
during the read since two 32bit loads are required. The usage of a
seqcount_t requires a lock to ensure that only one writer is active at a
time. This lock leads to disabled preemption during the update.
The lack of disabling preemption is now creating a warning as reported
by Naresh since the query done by gnet_stats_copy_basic() is in
preemptible context.
For ___gnet_stats_copy_basic() there is no need to disable preemption
since the update is performed on stack and can't be modified by another
writer. Instead of disabling preemption, to avoid the warning,
simply create a read function to just read the values and return as u64.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 67c9e6270f ("net: sched: Protect Qdisc::bstats with u64_stats")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use blocks 0 and 1 of TCB0 for clocksource and clockevent functionality.
PIT64B is already enabled on SAMA7G5 targets for this but TCB0 will be
used as a fallback only in case PIT64B will fail to probe.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-4-claudiu.beznea@microchip.com
Add RTC node.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
[claudiu.beznea: add sama7g5 compatible as the IP has 2 extra registers
compared with sam9x60]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211020094656.3343242-2-claudiu.beznea@microchip.com
Vladimir Oltean says:
====================
Remove the "dsa_to_port in a loop" antipattern
v1->v2: more patches
v2->v3: less patches
As opposed to previous series, I would now like to first refactor the
DSA core, since that sees fewer patches than drivers, and make the
helpers available. Since the refactoring is fairly noisy, I don't want
to force it on driver maintainers right away, patches can be submitted
independently.
The original cover letter is below:
The DSA core and drivers currently iterate too much through the port
list of a switch. For example, this snippet:
for (port = 0; port < ds->num_ports; port++) {
if (!dsa_is_cpu_port(ds, port))
continue;
ds->ops->change_tag_protocol(ds, port, tag_ops->proto);
}
iterates through ds->num_ports once, and then calls dsa_is_cpu_port to
filter out the other types of ports. But that function has a hidden call
to dsa_to_port() in it, which contains:
list_for_each_entry(dp, &dst->ports, list)
if (dp->ds == ds && dp->index == p)
return dp;
where the only thing we wanted to know in the first place was whether
dp->type == DSA_PORT_TYPE_CPU or not.
So it seems that the problem is that we are not iterating with the right
variable. We have an "int port" but in fact need a "struct dsa_port *dp".
This has started being an issue since this patch series:
https://patchwork.ozlabs.org/project/netdev/cover/20191020031941.3805884-1-vivien.didelot@gmail.com/
The currently proposed set of changes iterates like this:
dsa_switch_for_each_cpu_port(cpu_dp, ds)
err = ds->ops->change_tag_protocol(ds, cpu_dp->index,
tag_ops->proto);
which iterates directly over ds->dst->ports, which is a list of struct
dsa_port *dp. This makes it much easier and more efficient to check
dp->type.
As a nice side effect, with the proposed driver API, driver writers are
now encouraged to use more efficient patterns, and not only due to less
iterations through the port list. For example, something like this:
for (port = 0; port < ds->num_ports; port++)
do_something();
probably does not need to do_something() for the ports that are disabled
in the device tree. But adding extra code for that would look like this:
for (port = 0; port < ds->num_ports; port++) {
if (!dsa_is_unused_port(ds, port))
continue;
do_something();
}
and therefore, it is understandable that some driver writers may decide
to not bother. This patch series introduces a "dsa_switch_for_each_available_port"
macro which comes at no extra cost in terms of lines of code / number of
braces to the driver writer, but it has the "dsa_is_unused_port" check
embedded within it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a single argument to dsa_8021q_rx_vid and dsa_8021q_tx_vid that
contains the necessary information from the two arguments that are
currently provided: the switch and the port number.
Also rename those functions so that they have a dsa_port_* prefix, since
they operate on a struct dsa_port *.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Find the remaining iterators over dst->ports that only filter for the
ports belonging to a certain switch, and replace those with the
dsa_switch_for_each_port helper that we have now.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
