No need to use the tmp variable, just use the constant
directly.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly the same code was present in all VCN versions.
Consolidate it into a single function.
v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Only enable firmware for the instance that is enabled.
v2: use AMDGPU_UCODE_ID_VCN + i
Fixes: 1b592d00b4 ("drm/amdgpu/vcn: remove manual instance setting")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all migrate.cpages returned from migrate_vma_setup can be migrated,
for example non anonymous page, or out of device memory. So after
migrate_vma_pages returns, add debug message to count pages are
successfully migrated which has MIGRATE_PFN_VALID and
MIGRATE_PFN_MIGRATE flag set.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
cpages is only updated by migrate_vma_setup. So capture its value at
that point to clarify the significance of the number. The next patch
will add counting of actually migrated pages after migrate_vma_pages for
debug purposes.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP firmware will be responsible for applying the GRBM CAM remapping in
the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be
protected by PSP under security policy. So remove it according to the
new security policy.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GPU metrics feature in one VF mode.
These are only possible in one VF mode because the VF is dedicated in that case.
Signed-off-by: Vignesh Chander <Vignesh.Chander@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull ucounts fixes from Eric Biederman:
"There has been one very hard to track down bug in the ucount code that
we have been tracking since roughly v5.14 was released. Alex managed
to find a reliable reproducer a few days ago and then I was able to
instrument the code and figure out what the issue was.
It turns out the sigqueue_alloc single atomic operation optimization
did not play nicely with ucounts multiple level rlimits. It turned out
that either sigqueue_alloc or sigqueue_free could be operating on
multiple levels and trigger the conditions for the optimization on
more than one level at the same time.
To deal with that situation I have introduced inc_rlimit_get_ucounts
and dec_rlimit_put_ucounts that just focuses on the optimization and
the rlimit and ucount changes.
While looking into the big bug I found I couple of other little issues
so I am including those fixes here as well.
When I have time I would very much like to dig into process ownership
of the shared signal queue and see if we could pick a single owner for
the entire queue so that all of the rlimits can count to that owner.
That should entirely remove the need to call get_ucounts and
put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult
because Linux unlike POSIX supports setuid that works on a single
thread"
* 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring
ucounts: Proper error handling in set_cred_ucounts
ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds
ucounts: Fix signal ucount refcounting
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv",
there are valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv
abort sessions on receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg()
fix return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails,
prevent stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Hwqr
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and can.
We'll have one more fix for a socket accounting regression, it's still
getting polished. Otherwise things look fine.
Current release - regressions:
- revert "vrf: reset skb conntrack connection on VRF rcv", there are
valid uses for previous behavior
- can: m_can: fix iomap_read_fifo() and iomap_write_fifo()
Current release - new code bugs:
- mlx5: e-switch, return correct error code on group creation failure
Previous releases - regressions:
- sctp: fix transport encap_port update in sctp_vtag_verify
- stmmac: fix E2E delay mechanism (in PTP timestamping)
Previous releases - always broken:
- netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr
- netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of
init
- netfilter: ipvs: make global sysctl read-only in non-init netns
- tcp: md5: fix selection between vrf and non-vrf keys
- ipv6: count rx stats on the orig netdev when forwarding
- bridge: mcast: use multicast_membership_interval for IGMPv3
- can:
- j1939: fix UAF for rx_kref of j1939_priv abort sessions on
receiving bad messages
- isotp: fix TX buffer concurrent access in isotp_sendmsg() fix
return error on FC timeout on TX path
- ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited
- hns3: schedule the polling again when allocation fails, prevent
stalls
- drivers: add missing of_node_put() when aborting
for_each_available_child_of_node()
- ptp: fix possible memory leak and UAF in ptp_clock_register()
- e1000e: fix packet loss in burst mode on Tiger Lake and later
- mlx5e: ipsec: fix more checksum offload issues"
* tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
usbnet: sanity check for maxpacket
net: enetc: make sure all traffic classes can send large frames
net: enetc: fix ethtool counter name for PM0_TERR
ptp: free 'vclock_index' in ptp_clock_release()
sfc: Don't use netif_info before net_device setup
sfc: Export fibre-specific supported link modes
net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags
net/mlx5e: IPsec: Fix a misuse of the software parser's fields
net/mlx5e: Fix vlan data lost during suspend flow
net/mlx5: E-switch, Return correct error code on group creation failure
net/mlx5: Lag, change multipath and bonding to be mutually exclusive
ice: Add missing E810 device ids
igc: Update I226_K device ID
e1000e: Fix packet loss on Tiger Lake and later
e1000e: Separate TGP board type from SPT
ptp: Fix possible memory leak in ptp_clock_register()
net: stmmac: Fix E2E delay mechanism
nfc: st95hf: Make spi remove() callback return zero
net: hns3: disable sriov before unload hclge layer
net: hns3: fix vf reset workqueue cannot exit
...
Fix a bug exposed by a previous fix, where running guests with certain SMT topologies
could crash the host on Power8.
Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled.
Thanks to: Nathan Lynch, Srikar Dronamraju, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----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=572c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bug exposed by a previous fix, where running guests with
certain SMT topologies could crash the host on Power8.
- Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is
enabled.
Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider.
* tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/smp: do not decrement idle task preempt count in CPU offline
powerpc/idle: Don't corrupt back chain when going idle
The driver has runtime_suspend and runtime_resume callbacks, but
pm_runtime is never enabled so these functions won't be called. They
could not be used anyway because the runtime_suspend would cause jack
detect to stop working.
These functions are unused - delete them.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211018164431.5871-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SND_SOC_SC7180 or SND_SOC_STORM is selected,
and GPIOLIB is not selected, Kbuild gives the following
warning:
WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
Selected by [y]:
- SND_SOC_STORM [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y]
- SND_SOC_SC7180 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && I2C [=y]
This is because SND_SOC_MAX98357A is selected
by SND_SOC_STORM and SND_SOC_SC7180, but
these config options do not select or depend on
GPIOLIB, despite SND_SOC_MAX98357A depending on
GPIOLIB.
These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20211010215627.17869-1-julianbraha@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series includes the patches to add basic support for new UniPhier NX1
SoC. NX1 SoC also has the same kinds of controls as the other UniPhier
SoCs.
Kunihiko Hayashi (2):
dt-bindings: regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
.../devicetree/bindings/regulator/socionext,uniphier-regulator.yaml | 1 +
drivers/regulator/uniphier-regulator.c | 4 ++++
2 files changed, 5 insertions(+)
--
2.7.4
The struct qbman_eq_desc 'd' variable declaration is covering one of the
function parameters. This has no functional impact since this function
parameter was not used after the new declaration.
Even so, rename the variable so that we make the code more readable.
Fixes: 3b2abda7d2 ("soc: fsl: dpio: Replace QMAN array mode with ring mode enqueue")
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use an explicit NULL pointer when calling qbman_swp_enqueue_multiple()
instead of a plain integer. Without this fix, we get the following
compile time error.
drivers/soc/fsl/dpio/dpio-service.c:466:60: warning: Using plain integer as NULL pointer
Fixes: 9d98809711 ("soc: fsl: dpio: Adding QMAN multiple enqueue interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Andrii Nakryiko says:
====================
This patch set refactors internals of libbpf to enable support for multiple
custom .rodata.* and .data.* sections. Each such section is backed by its own
BPF_MAP_TYPE_ARRAY, memory-mappable just like .rodata/.data. This is not
extended to .bss because .bss is not a great name, it is generated by compiler
with name that reflects completely irrelevant historical implementation
details. Given that users have to annotate their variables with
SEC(".data.my_sec") explicitly, standardizing on .rodata. and .data. prefixes
makes more sense and keeps things simpler.
Additionally, this patch set makes it simpler to work with those special
internal maps by allowing to look them up by their full ELF section name.
Patch #1 is a preparatory patch that deprecates one libbpf API and moves
custom logic into libbpf.c, where it's used. This code is later refactored
with the rest of libbpf.c logic to support multiple data section maps.
See individual patches for all the details.
For new custom "dot maps", their full ELF section names are used as the names
that are sent into the kernel. Object name isn't prepended like for
.data/.rodata/.bss. The reason is that with longer custom names, there isn't
much space left for object name anyways. Also, if BTF is supported,
btf_value_type_id points to DATASEC BTF type, which contains full original ELF
name of the section, so tools like bpftool could use that to recover full
name. This patch set doesn't add this logic yet, this is left for follow up
patches.
One interesting possibility that is now open by these changes is that it's
possible to do:
bpf_trace_printk("My fmt %s", sizeof("My fmt %s"), "blah");
and it will work as expected. I haven't updated libbpf-provided helpers in
bpf_helpers.h for snprintf, seq_printf, and printk, because using
`static const char ___fmt[] = fmt;` trick is still efficient and doesn't fill
out the buffer at runtime (no copying). But we might consider updating them in
the future, especially with the array check that Kumar proposed (see [0]).
[0] https://lore.kernel.org/bpf/20211012041524.udytbr2xs5wid6x2@apollo.localdomain/
v1->v2:
- don't prepend object name for new dot maps;
- add __read_mostly example in selftests (Daniel).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Utilize libbpf's feature of allowing to lookup internal maps by their
ELF section names. No need to guess or calculate the exact truncated
prefix taken from the object name.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-11-andrii@kernel.org
Map name that's assigned to internal maps (.rodata, .data, .bss, etc)
consist of a small prefix of bpf_object's name and ELF section name as
a suffix. This makes it hard for users to "guess" the name to use for
looking up by name with bpf_object__find_map_by_name() API.
One proposal was to drop object name prefix from the map name and just
use ".rodata", ".data", etc, names. One downside called out was that
when multiple BPF applications are active on the host, it will be hard
to distinguish between multiple instances of .rodata and know which BPF
object (app) they belong to. Having few first characters, while quite
limiting, still can give a bit of a clue, in general.
Note, though, that btf_value_type_id for such global data maps (ARRAY)
points to DATASEC type, which encodes full ELF name, so tools like
bpftool can take advantage of this fact to "recover" full original name
of the map. This is also the reason why for custom .data.* and .rodata.*
maps libbpf uses only their ELF names and doesn't prepend object name at
all.
Another downside of such approach is that it is not backwards compatible
and, among direct use of bpf_object__find_map_by_name() API, will break
any BPF skeleton generated using bpftool that was compiled with older
libbpf version.
Instead of causing all this pain, libbpf will still generate map name
using a combination of object name and ELF section name, but it will
allow looking such maps up by their natural names, which correspond to
their respective ELF section names. This means non-truncated ELF section
names longer than 15 characters are going to be expected and supported.
With such set up, we get the best of both worlds: leave small bits of
a clue about BPF application that instantiated such maps, as well as
making it easy for user apps to lookup such maps at runtime. In this
sense it closes corresponding libbpf 1.0 issue ([0]).
BPF skeletons will continue using full names for lookups.
[0] Closes: https://github.com/libbpf/libbpf/issues/275
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-10-andrii@kernel.org
Enhance existing selftests to demonstrate the use of custom
.data/.rodata sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-9-andrii@kernel.org
Add support for having multiple .rodata and .data data sections ([0]).
.rodata/.data are supported like the usual, but now also
.rodata.<whatever> and .data.<whatever> are also supported. Each such
section will get its own backing BPF_MAP_TYPE_ARRAY, just like
.rodata and .data.
Multiple .bss maps are not supported, as the whole '.bss' name is
confusing and might be deprecated soon, as well as user would need to
specify custom ELF section with SEC() attribute anyway, so might as well
stick to just .data.* and .rodata.* convention.
User-visible map name for such new maps is going to be just their ELF
section names.
[0] https://github.com/libbpf/libbpf/issues/274
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-8-andrii@kernel.org
It can happen that some data sections (e.g., .rodata.cst16, containing
compiler populated string constants) won't have a corresponding BTF
DATASEC type. Now that libbpf supports .rodata.* and .data.* sections,
situation like that will cause invalid BPF skeleton to be generated that
won't compile successfully, as some parts of skeleton would assume
memory-mapped struct definitions for each special data section.
Fix this by generating empty struct definitions for such data sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-7-andrii@kernel.org
Remove the assumption about only single instance of each of .rodata and
.data internal maps. Nothing changes for '.rodata' and '.data' maps, but new
'.rodata.something' map will get 'rodata_something' section in BPF
skeleton for them (as well as having struct bpf_map * field in maps
section with the same field name).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-6-andrii@kernel.org
Remove internal libbpf assumption that there can be only one .rodata,
.data, and .bss map per BPF object. To achieve that, extend and
generalize the scheme that was used for keeping track of relocation ELF
sections. Now each ELF section has a temporary extra index that keeps
track of logical type of ELF section (relocations, data, read-only data,
BSS). Switch relocation to this scheme, as well as .rodata/.data/.bss
handling.
We don't yet allow multiple .rodata, .data, and .bss sections, but no
libbpf internal code makes an assumption that there can be only one of
each and thus they can be explicitly referenced by a single index. Next
patches will actually allow multiple .rodata and .data sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-5-andrii@kernel.org
Minimize the usage of class-agnostic gelf_xxx() APIs from libelf. These
APIs require copying ELF data structures into local GElf_xxx structs and
have a more cumbersome API. BPF ELF file is defined to be always 64-bit
ELF object, even when intended to be run on 32-bit host architectures,
so there is no need to do class-agnostic conversions everywhere. BPF
static linker implementation within libbpf has been using Elf64-specific
types since initial implementation.
Add two simple helpers, elf_sym_by_idx() and elf_rel_by_idx(), for more
succinct direct access to ELF symbol and relocation records within ELF
data itself and switch all the GElf_xxx usage into Elf64_xxx
equivalents. The only remaining place within libbpf.c that's still using
gelf API is gelf_getclass(), as there doesn't seem to be a direct way to
get underlying ELF bitness.
No functional changes intended.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-4-andrii@kernel.org
Name currently anonymous internal struct that keeps ELF-related state
for bpf_object. Just a bit of clean up, no functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-3-andrii@kernel.org
There isn't a good use case where anyone but libbpf itself needs to call
btf__finalize_data(). It was implemented for internal use and it's not
clear why it was made into public API in the first place. To function, it
requires active ELF data, which is stored inside bpf_object for the
duration of opening phase only. But the only BTF that needs bpf_object's
ELF is that bpf_object's BTF itself, which libbpf fixes up automatically
during bpf_object__open() operation anyways. There is no need for any
additional fix up and no reasonable scenario where it's useful and
appropriate.
Thus, btf__finalize_data() is just an API atavism and is better removed.
So this patch marks it as deprecated immediately (v0.6+) and moves the
code from btf.c into libbpf.c where it's used in the context of
bpf_object opening phase. Such code co-location allows to make code
structure more straightforward and remove bpf_object__section_size() and
bpf_object__variable_offset() internal helpers from libbpf_internal.h,
making them static. Their naming is also adjusted to not create
a wrong illusion that they are some sort of method of bpf_object. They
are internal helpers and are called appropriately.
This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/276
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-2-andrii@kernel.org
Łukasz Stelmach says:
====================
AX88796C SPI Ethernet Adapter
This is a driver for AX88796C Ethernet Adapter connected in SPI mode as
found on ARTIK5 evaluation board. The driver has been ported from a
v3.10.9 vendor kernel for ARTIK5 board.
====================
Link: https://lore.kernel.org/r/20211020182422.362647-1-l.stelmach@samsung.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASIX AX88796[1] is a versatile ethernet adapter chip, that can be
connected to a CPU with a 8/16-bit bus or with an SPI. This driver
supports SPI connection.
The driver has been ported from the vendor kernel for ARTIK5[2]
boards. Several changes were made to adapt it to the current kernel
which include:
+ updated DT configuration,
+ clock configuration moved to DT,
+ new timer, ethtool and gpio APIs,
+ dev_* instead of pr_* and custom printk() wrappers,
+ removed awkward vendor power managemtn.
+ introduced ethtool tunable to control SPI compression
[1] https://www.asix.com.tw/products.php?op=pItemdetail&PItemID=104;65;86&PLine=65
[2] https://git.tizen.org/cgit/profile/common/platform/kernel/linux-3.10-artik/
The other ax88796 driver is for NE2000 compatible AX88796L chip. These
chips are not compatible. Hence, two separate drivers are required.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the prefix for ASIX Electronics Corporation.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some SBE operations have extremely large responses and can require
several minutes to process the response. During this time, the device
lock must be held. If another process attempts an operation, it will
wait for the mutex for longer than the kernel hung task watchdog
allows. Therefore, use the interruptible function to lock the mutex.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210803213016.44739-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The SBEFIFO timeout error requires special handling in userspace
to do recovery operations. Add a sysfs file to indicate a timeout
error, and notify pollers when a timeout occurs.
This will be used by the openpower-occ-control application.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211019211749.38059-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Save any FFDC provided by the OCC driver, and provide it to userspace
through a binary sysfs entry. Notify userspace pollers when there is an
error too.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211019205307.36946-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
If the SBEFIFO response indicates an error, store the response in the
user buffer and return an error. Previously, the user had no way of
obtaining the SBEFIFO FFDC.
The user's buffer now contains data in the event of a failure. No change
in the event of a successful transfer.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019205307.36946-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Allocate a large buffer for each OCC to handle response data. This
removes memory allocation during an operation, and also allows for
the maximum amount of SBE FFDC.
Previously for the putsram and attn commands, only 32 words would have
been available, and for getsram, only up to the size of the transfer.
SBE FFDC might be up to 8Kb.
The SBE interface expects data to be specified in units of words (4
bytes), defined as OCC_MAX_RESP_WORDS.
This change allows the full FFDC capture to be implemented, where before
it was not available.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211019205307.36946-2-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Free the kbuf buffer before returning from the dpaa2_console_read()
function. The variable no longer goes out of scope, leaking the storage
it points to.
Fixes: c93349d8c1 ("soc: fsl: add DPAA2 console support")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
`__compiletime_assert` declares a fake `extern` function
which appears (to the compiler) to be called when the test fails.
Therefore, compilers may emit possibly-uninitialized warnings
in some cases, even if it will be an error anyway (for compilers
supporting the `error` attribute, e.g. GCC and Clang >= 14)
or a link failure (for those that do not, e.g. Clang < 14).
Annotating the fake function as `__noreturn` gives them
the information they need to avoid the warning,
e.g. see https://godbolt.org/z/x1v69jjYY.
Link: https://lore.kernel.org/llvm/202110100514.3h9CI4s0-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Jiri Olsa says:
====================
hi,
sending fixes for perf_buffer test on systems
with offline cpus.
v2:
- resend due to delivery issues, no changes
thanks,
jirka
Acked-by: John Fastabend <john.fastabend@gmail.com>
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The perf buffer tests triggers trace with nanosleep syscall,
but monitors all syscalls, which results in lot of data in the
buffer and makes it harder to debug. Let's lower the trace
traffic and monitor just nanosleep syscall.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-4-jolsa@kernel.org
The perf_buffer fails on system with offline cpus:
# test_progs -t perf_buffer
serial_test_perf_buffer:PASS:nr_cpus 0 nsec
serial_test_perf_buffer:PASS:nr_on_cpus 0 nsec
serial_test_perf_buffer:PASS:skel_load 0 nsec
serial_test_perf_buffer:PASS:attach_kprobe 0 nsec
serial_test_perf_buffer:PASS:perf_buf__new 0 nsec
serial_test_perf_buffer:PASS:epoll_fd 0 nsec
skipping offline CPU #4
serial_test_perf_buffer:PASS:perf_buffer__poll 0 nsec
serial_test_perf_buffer:PASS:seen_cpu_cnt 0 nsec
serial_test_perf_buffer:PASS:buf_cnt 0 nsec
...
serial_test_perf_buffer:PASS:fd_check 0 nsec
serial_test_perf_buffer:PASS:drain_buf 0 nsec
serial_test_perf_buffer:PASS:consume_buf 0 nsec
serial_test_perf_buffer:FAIL:cpu_seen cpu 5 not seen
#88 perf_buffer:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
If the offline cpu is from the middle of the possible set,
we get mismatch with possible and online cpu buffers.
The perf buffer test calls perf_buffer__consume_buffer for
all 'possible' cpus, but the library holds only 'online'
cpu buffers and perf_buffer__consume_buffer returns them
based on index.
Adding extra (online) index to keep track of online buffers,
we need the original (possible) index to trigger trace on
proper cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211021114132.8196-3-jolsa@kernel.org
Dave Marchevsky says:
====================
This is a followup to discussion around RFC patchset "bpf: keep track of
prog verification stats" [0]. The RFC elaborates on my usecase, but to
summarize: keeping track of verifier stats for programs as they - and
the kernels they run on - change over time can help developers of
individual programs and BPF kernel folks.
The RFC added a verif_stats to the uapi which contained most of the info
which verifier prints currently. Feedback here was to avoid polluting
uapi with stats that might be meaningless after major changes to the
verifier, but that insn_processed or conceptually similar number would
exist in the long term and was safe to expose.
So let's expose just insn_processed via bpf_prog_info and fdinfo for now
and explore good ways of getting more complicated stats in the future.
[0] https://lore.kernel.org/bpf/20210920151112.3770991-1-davemarchevsky@fb.com/
v2->v3:
* Remove unnecessary check in patch 2's test [Andrii]
* Go back to adding new u32 in bpf_prog_info (vs using spare bits) [Andrii]
* Rebase + add acks [Andrii, John]
v1->v2:
* Rename uapi field from insn_processed to verified_insns [Daniel]
* use 31 bits of existing bitfield space in bpf_prog_info [Daniel]
* change underlying type from 64-> 32 bits [Daniel]
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
verified_insns field was added to response of bpf_obj_get_info_by_fd
call on a prog. Confirm that it's being populated by loading a simple
program and asking for its info.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211020074818.1017682-3-davemarchevsky@fb.com
