Because _LARGEFILE64_SOURCE is set in perf, file offset sizes can be
64 bits. If a workflow needs to open /proc/kcore on a 32 bit system (for
example to decode Arm ETM kernel trace) then the size value will be
wrapped to 32 bits in the function file_size() at this line:
dso->data.file_size = st.st_size;
Setting the file_size member to be u64 fixes the issue and allows
/proc/kcore to be opened.
Reported-by: Denis Nikitin <denik@chromium.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20211021112700.112499-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following build message:
rm dlfilters/dlfilter-test-api-v0.o
is unwanted.
The object file is being treated as an intermediate file and being
automatically removed. Mark the object file as .SECONDARY to prevent
removal and hence the message.
Requested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210930062849.110416-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new option '--cputype' to 'perf list' to display core-only PMU
events or atom-only PMU events.
Each hybrid PMU event has been assigned with a PMU name, this patch
compares the PMU name before listing the result.
For example:
perf list --cputype atom
...
cache:
core_reject_l2q.any
[Counts the number of request that were not accepted into the L2Q because the L2Q is FULL. Unit: cpu_atom]
...
The "Unit: cpu_atom" is displayed in the brief description section
to indicate this is an atom event.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210903025239.22754-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables presenting Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers for the perf tool.
Add these SPR's to sample_reg_mask in the tool side (to use with -I?
option).
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211018114948.16830-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask value
for extended registers. Current definition of these mask values uses hex
constant and does not use registers by name, making it less readable.
Patch refactor the macro values in perf tools side header file by or'ing
together the actual register value constants.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20211018114948.16830-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate the reading code of a single event to a new
reader__read_event() function.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ffe570d937138dd24f282978ce7ed9c46a06ff9b.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the unmapping code to reader__mmap(), so that the mmap code is
located together.
Move the head/file_offset computation to reader__mmap(), so all the
offset computation is located together and in one place only.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/f1c5e17cfa1ecfe912d10b411be203b55d148bc7.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate init/release code into reader__init() and reader__release_decomp()
functions.
Remove a duplicate call to ui_progress__init_size(), the same call can
be found in __perf_session__process_events().
For multiple traces ui_progress should be initialized by total size
before reader__init() calls.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/8bacf247de220be8e57af1d2b796322175f5e257.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a decompressor data structure with pointers to decomp
objects and to zstd object.
We cannot just move session->zstd_data to decomp_data as
session->zstd_data is not only used for decompression.
Adding decompressor data object to reader object and introducing
active_decomp into perf_session object to select current decompressor.
Thus decompression could be executed separately for each data file.
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0eee270cb52aebcbd029c8445d9009fd17709d53.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need all the state info about reader in separate object to load data
from multiple files, so we can keep multiple readers at the same time.
Moving all items that need to be kept from reader__process_events to
the reader object. Introducing mmap_cur to keep current mapping.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Riccardo Mancini <rickyman7@gmail.com>
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Tested-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/5c7bdebfaadd7fcb729bd999b181feccaa292e8e.1634113027.git.alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Three fixes pertaining to Broadcom DT bindings. Some stuff
didn't work out as inteded, we need to back out.
- A resume bug fix in the STM32 driver.
- Disable and mask the interrupts on probe in the AMD pinctrl
driver, affecting Microsoft surface.
-----BEGIN PGP SIGNATURE-----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=cgpF
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some late pin control fixes, the most generally annoying will probably
be the AMD IRQ storm fix affecting the Microsoft surface.
Summary:
- Three fixes pertaining to Broadcom DT bindings. Some stuff didn't
work out as inteded, we need to back out
- A resume bug fix in the STM32 driver
- Disable and mask the interrupts on probe in the AMD pinctrl driver,
affecting Microsoft surface"
* tag 'pinctrl-v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: disable and mask interrupts on probe
pinctrl: stm32: use valid pin identifier in stm32_pinctrl_resume()
Revert "pinctrl: bcm: ns: support updated DT binding as syscon subnode"
dt-bindings: pinctrl: brcm,ns-pinmux: drop unneeded CRU from example
Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
Originally, software only supported redirecting at most one PEBS event to
Intel PT (PEBS-via-PT) because it was not able to differentiate one event
from another. To overcome that, add support for the
PERF_RECORD_AUX_OUTPUT_HW_ID side-band event.
Committer notes:
Cast the pointer arg to for_each_set_bit() to (unsigned long *), to fix
the build on 32-bit systems.
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20210907163903.11820-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
KCSAN complaints about the sbitmap hint update:
==================================================================
BUG: KCSAN: data-race in sbitmap_queue_clear / sbitmap_queue_clear
write to 0xffffe8ffffd145b8 of 4 bytes by interrupt on cpu 1:
sbitmap_queue_clear+0xca/0xf0 lib/sbitmap.c:606
blk_mq_put_tag+0x82/0x90
__blk_mq_free_request+0x114/0x180 block/blk-mq.c:507
blk_mq_free_request+0x2c8/0x340 block/blk-mq.c:541
__blk_mq_end_request+0x214/0x230 block/blk-mq.c:565
blk_mq_end_request+0x37/0x50 block/blk-mq.c:574
lo_complete_rq+0xca/0x170 drivers/block/loop.c:541
blk_complete_reqs block/blk-mq.c:584 [inline]
blk_done_softirq+0x69/0x90 block/blk-mq.c:589
__do_softirq+0x12c/0x26e kernel/softirq.c:558
run_ksoftirqd+0x13/0x20 kernel/softirq.c:920
smpboot_thread_fn+0x22f/0x330 kernel/smpboot.c:164
kthread+0x262/0x280 kernel/kthread.c:319
ret_from_fork+0x1f/0x30
write to 0xffffe8ffffd145b8 of 4 bytes by interrupt on cpu 0:
sbitmap_queue_clear+0xca/0xf0 lib/sbitmap.c:606
blk_mq_put_tag+0x82/0x90
__blk_mq_free_request+0x114/0x180 block/blk-mq.c:507
blk_mq_free_request+0x2c8/0x340 block/blk-mq.c:541
__blk_mq_end_request+0x214/0x230 block/blk-mq.c:565
blk_mq_end_request+0x37/0x50 block/blk-mq.c:574
lo_complete_rq+0xca/0x170 drivers/block/loop.c:541
blk_complete_reqs block/blk-mq.c:584 [inline]
blk_done_softirq+0x69/0x90 block/blk-mq.c:589
__do_softirq+0x12c/0x26e kernel/softirq.c:558
run_ksoftirqd+0x13/0x20 kernel/softirq.c:920
smpboot_thread_fn+0x22f/0x330 kernel/smpboot.c:164
kthread+0x262/0x280 kernel/kthread.c:319
ret_from_fork+0x1f/0x30
value changed: 0x00000035 -> 0x00000044
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10 Comm: ksoftirqd/0 Not tainted 5.15.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
==================================================================
which is a data race, but not an important one. This is just updating the
percpu alloc hint, and the reader of that hint doesn't ever require it to
be valid.
Just annotate it with data_race() to silence this one.
Reported-by: syzbot+4f8bfd804b4a1f95b8f6@syzkaller.appspotmail.com
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When removing the index argument from snd_soc_topology_component_remove()
commit a5b8f71c54 (ASoC: topology: Remove multistep topology loading)
forgot to update the stub for !SND_SOC_TOPOLOGY use, causing build failures
for anything that tries to make use of it.
Fixes: a5b8f71c54 (ASoC: topology: Remove multistep topology loading)
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211025154844.2342120-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
At the moment, the DAI link nodes in the device tree always have to be
specified completely in each device tree. However, the available
interfaces (e.g. Primary/Secondary/Tertiary/Quaternary MI2S) are common
for all devices of a SoC, so the majority of the definitions can be
placed in a common device tree include to reduce boilerplate.
Make it possible to define such stubs in device tree includes by
respecting the "status" property for the DAI link nodes. This is
a trivial change that just requires switching to the _available_
OF functions that check the "status" property additionally.
This allows defining a stub like:
sound_dai_quaternary: dai-link-quaternary {
link-name = "Quaternary MI2S";
status = "disabled"; /* Needs extra codec configuration */
cpu {
sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
};
platform {
sound-dai = <&q6routing>;
};
};
where the codec would be filled in by the device-specific device tree.
For existing device trees this change does not make any difference.
A missing "status" property is treated like status = "okay".
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211025105503.49444-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi all,
This patch series converts the Wolfson WM8962 Device Tree binding
documentation to json-schema, after fixing an issue in the imx8mn-beacon
DTS file.
Thanks for your comments!
Geert Uytterhoeven (2):
arm64: dts: imx: imx8mn-beacon: Drop undocumented clock-names
reference
ASoC: dt-bindings: wlf,wm8962: Convert to json-schema
.../devicetree/bindings/sound/wlf,wm8962.yaml | 118 ++++++++++++++++++
.../devicetree/bindings/sound/wm8962.txt | 43 -------
.../freescale/imx8mn-beacon-baseboard.dtsi | 1 -
3 files changed, 118 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/wm8962.txt
--
2.25.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
The second argument was only used by the USB gadget code, yet everyone
pays the overhead of passing a zero to be passed into aio, where it
ends up being part of the aio res2 value.
Now that everybody is passing in zero, kill off the extra argument.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hyper-V needs to issue the GHCB HV call in order to read/write MSRs in
Isolation VMs. For that, expose sev_es_ghcb_hv_call().
The Hyper-V Isolation VMs are unenlightened guests and run a paravisor
at VMPL0 for communicating. GHCB pages are being allocated and set up
by that paravisor. Linux gets the GHCB page's physical address via
MSR_AMD64_SEV_ES_GHCB from the paravisor and should not change it.
Add a @set_ghcb_msr parameter to sev_es_ghcb_hv_call() to control
whether the function should set the GHCB's address prior to the call or
not and export that function for use by HyperV.
[ bp: - Massage commit message
- add a struct ghcb forward declaration to fix randconfig builds. ]
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211025122116.264793-6-ltykernel@gmail.com
The USB gadget code is the only code that every tried to utilize the
2nd argument of the aio completions, but there are strong suspicions
that it was never actually used by anything on the userspace side.
Out of the 3 cases that touch it, two of them just pass in the same
as res, and the last one passes in error/transfer in res like any
other normal use case.
Remove the 2nd argument, pass 0 like the rest of the in-kernel users
of kiocb based IO.
Link: https://lore.kernel.org/linux-block/20211021174021.273c82b1.john@metanate.com/
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the following [-Wstringop-overread] by passing in the variable
instead of the value.
test_vsyscall.c: In function ‘test_process_vm_readv’:
test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread]
500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently in net_ns_get_ownership() it may not be able to set uid or gid
if make_kuid or make_kgid returns an invalid value, and an uninit-value
issue can be triggered by this.
This patch is to fix it by initializing the uid and gid before calling
net_ns_get_ownership(), as it does in kobject_get_ownership()
Fixes: e6dee9f389 ("net-sysfs: add netdev_change_owner()")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx queues are not stopped during the live migration. As a result, the
ndo_start_xmit() may access netfront_info->queues which is freed by
talk_to_netback()->xennet_destroy_queues().
This patch is to netif_device_detach() at the beginning of xen-netfront
resuming, and netif_device_attach() at the end of resuming.
CPU A CPU B
talk_to_netback()
-> if (info->queues)
xennet_destroy_queues(info);
to free netfront_info->queues
xennet_start_xmit()
to access netfront_info->queues
-> err = xennet_create_queues(info, &num_queues);
The idea is borrowed from virtio-net.
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers call netdev_set_num_tc() and then netdev_set_tc_queue()
to set the queue count and offset for each TC. So the queue count
and offset for the TCs may be zero for a short period after dev->num_tc
has been set. If a TX packet is being transmitted at this time in the
code path netdev_pick_tx() -> skb_tx_hash(), skb_tx_hash() may see
nonzero dev->num_tc but zero qcount for the TC. The while loop that
keeps looping while hash >= qcount will not end.
Fix it by checking the TC's qcount to be nonzero before using it.
Fixes: eadec877ce ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
AES_CCM_128 and CHACHA20_POLY1305 are already supported by tls,
similar to setsockopt, getsockopt also needs to support these
two algorithms.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tls already supports the SM4 GCM/CCM algorithms. It is also necessary
to add support for these two algorithms in tls_crypto_context to avoid
potential issues caused by forced type conversion.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid
some open-coded arithmetic in allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A hard hang is observed whenever the ethernet interface is brought
down. If the PHY is stopped before the LPC core block is reset,
the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I
re-arranged the ordering of the functions calls in lpc_eth_close() to
reset the hardware before stopping the PHY.
Fixes: b7370112f5 ("lpc32xx: Added ethernet driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
In the case of catc we need a new temporary buffer to conform
to the rules for DMA coherency. That in turn necessitates
a reworking of error handling in probe().
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Combine bio_iov_bvec_set() and bio_iov_bvec_set_append() and let the
caller to do iov_iter_advance(). Also get rid of __bio_iov_bvec_set(),
which was duplicated in the final binary, and replace a weird
iov_iter_truncate() of a temporal iter copy with min() better reflecting
the intention.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/bcf1ac36fce769a514e19475f3623cd86a1d8b72.1635006010.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As with __blkdev_direct_IO_simple(), we can implement direct IO more
efficiently if there is only one bio. Add __blkdev_direct_IO_async() and
blkdev_bio_end_io_async(). This patch brings me from 4.45-4.5 MIOPS with
nullblk to 4.7+.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f0ae4109b7a6934adede490f84d188d53b97051b.1635006010.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As it turns out, my earlier patch in commit 86d46fdaa1 (block:
ataflop: fix breakage introduced at blk-mq refactoring) was
incomplete. This patch fixes any remaining issues found during
more testing and code review.
Requests exceeding 4 k are handled in 4k segments but
__blk_mq_end_request() is never called on these (still
sectors outstanding on the request). With redo_fd_request()
removed, there is no provision to kick off processing of the
next segment, causing requests exceeding 4k to hang. (By
setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround,
this behaviour can be avoided).
Instead of reintroducing redo_fd_request(), requeue the remainder
of the request by calling blk_mq_requeue_request() on incomplete
requests (i.e. when blk_update_request() still returns true), and
rely on the block layer to queue the residual as new request.
Both error handling and formatting needs to release the
ST-DMA lock, so call finish_fdc() on these (this was previously
handled by redo_fd_request()). finish_fdc() may be called
legitimately without the ST-DMA lock held - make sure we only
release the lock if we actually held it. In a similar way,
early exit due to errors in ataflop_queue_rq() must release
the lock.
After minor errors, fd_error sets up to recalibrate the drive
but never re-runs the current operation (another task handled by
redo_fd_request() before). Call do_fd_action() to get the next
steps (seek, retry read/write) underway.
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Fixes: 6ec3938cff (ataflop: convert to blk-mq)
CC: linux-block@vger.kernel.org
Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ioprio setup doesn't depend on other fields that are modified in
io_prep_rw() and we can move it down in the function without worrying
about performance. It's useful as it makes iocb->ki_flags
accesses/modifications closer together, so it's more likely the compiler
will cache it in a register and avoid extra reloads.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8ee98779c06f1b59f6039b1e292db4332efd664b.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
opcode prep functions are one of the first things that are called, we
can't have ->async_data allocated at this point and it's certainly a
bug. Reflect this assumption in io_timeout_prep() and add a WARN_ONCE
just in case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/75a28ca7dbcc5af8b6cd9092819e8384c24dedd4.1634987320.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an opcode doesn't support polling, just let it be executed
synchronously in iowq, otherwise it will do a nonblock attempt just to
fail in io_arm_poll_handler() and return back to blocking execution.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6401256db01b88f448f15fcd241439cb76f5b940.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->pollout or ->pollin are set only for opcodes that need a file, so if
io_arm_poll_handler() tests them first we can be sure that the request
has file set and the ->file check can be removed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9adfe4f543d984875e516fce6da35348aab48668.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we've got IO_WQ_WORK_CANCEL in io_wq_submit_work(), handle the error
on the same lines as the check instead of having a weird code flow. The
main loop doesn't change but goes one indention left.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ff4a09cf41f7a22bbb294b6f1faea721e21fe615.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do a bit of cleaning for the main loop of io_wq_submit_work(). Get rid
of switch, just replace it with a single if as we're retrying in both
other cases. Kill issue_sqe label, Get rid of needs_poll nesting and
disambiguate a bit the comment.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ed12ce0c64e051f9a6b8a37a24f8ea554d299c29.1634987320.git.asml.silence@gmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This change fix the TX ack mechanism in various ways:
- For NO_ACK tagged packets, we don't need to wait for TX_ACK indication
and so are not subject to the single packet ack limitation. So we don't
have to stop the tx queue, and can call the tx status callback as soon
as DMA transfer has completed.
- Fix skb ownership/reference. Only start status indication timeout
once the DMA transfer has been completed. This avoids the skb to be
both referenced in the DMA tx ring and by the tx_ack_skb pointer,
preventing any use-after-free or double-free.
- This adds a sanity (paranoia?) check on the skb tx ack pointer.
- Resume TX queue if TX status tagged packet TX fails.
Cc: stable@vger.kernel.org
Fixes: fdf21cc371 ("wcn36xx: Add TX ack support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634567281-28997-1-git-send-email-loic.poulain@linaro.org
We observe unexpected connection drops with some APs due to
non-acked mac80211 generated null data frames (keep-alive).
After debugging and capture, we noticed that null frames are
submitted at standard data bitrate and that the given APs are
in trouble with that.
After setting the null frame bitrate to control bitrate, all
null frames are acked as expected and connection is maintained.
Not sure if it's a requirement of the specification, but it seems
the right thing to do anyway, null frames are mostly used for control
purpose (power-saving, keep-alive...), and submitting them with
a slower/simpler bitrate/modulation is more robust.
Cc: stable@vger.kernel.org
Fixes: 512b191d96 ("wcn36xx: Fix TX data path")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1634560399-15290-1-git-send-email-loic.poulain@linaro.org
The management registrations locking was broken, the list was
locked for each wdev, but cfg80211_mgmt_registrations_update()
iterated it without holding all the correct spinlocks, causing
list corruption.
Rather than trying to fix it with fine-grained locking, just
move the lock to the wiphy/rdev (still need the list on each
wdev), we already need to hold the wdev lock to change it, so
there's no contention on the lock in any case. This trivially
fixes the bug since we hold one wdev's lock already, and now
will hold the lock that protects all lists.
Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 6cd536fe62 ("cfg80211: change internal management frame registration API")
Link: https://lore.kernel.org/r/20211025133111.5cf733eab0f4.I7b0abb0494ab712f74e2efcd24bb31ac33f7eee9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Third set of patches for v5.16. This time we have a small one to
quickly fix two mt76 build failures I had missed in my previous pull
request.
Major changes:
mt76
* fix linking when CONFIG_MMC is disabled
* fix dev_err() format warning
* mt7615: mt7622: fix ibss and meshpoint
-----BEGIN PGP SIGNATURE-----
iQFJBAABCgAzFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmF2biAVHGt2YWxvQGNv
ZGVhdXJvcmEub3JnAAoJEG4XJFUm622b50gH/2ZQ5PVfP1JiE/PprBnISRhHSTjx
N0mirZfdeEfAATYgWRcFZZvZsidNH44s8M3mbQrLzPM3zAqx9qPHZHH1Gxr8OX9a
9RHAra60uNT1lNc/vLluNsE+uICfnHRyI3BPxqL8OK62wf5jlSaYtYlfIrOW3W5j
MyVjk9Acn2dQAhhYDLqfMru/w9k+xk10Omj072XOYImby2TGmF1b/SHBsmTLNW5l
zkjLGDrRU7LIx43LQy2ZZ0NUyYM0wNvSKAZS5QUGC+jbwG7iha+W7RwZ6P5ayMNc
5pPN2Ehz0qAd0p4JNZWPck1uC40A5qhDAD69L14MU42Pl4K88IAbNZjdE9o=
=grVq
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.16
Third set of patches for v5.16. This time we have a small one to
quickly fix two mt76 build failures I had missed in my previous pull
request.
Major changes:
mt76
* fix linking when CONFIG_MMC is disabled
* fix dev_err() format warning
* mt7615: mt7622: fix ibss and meshpoint
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
