just check ->f_mode in ima_appraise_measurement()
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Parallel to FILE_CREATED, goes into ->f_mode instead of *opened.
NFS is a bit of a wart here - it doesn't have file at the point
where FILE_CREATED used to be set, so we need to propagate it
there (for now). IMA is another one (here and everywhere)...
Note that this needs do_dentry_open() to leave old bits in ->f_mode
alone - we want it to preserve FMODE_CREATED if it had been already
set (no other bit can be there).
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just check FMODE_OPENED in __fput() and be done with that...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
basically, "is that instance set up enough for regular fput(), or
do we want put_filp() for that one".
NOTE: the only alloc_file() caller that could be followed by put_filp()
is in arch/ia64/kernel/perfmon.c, which is (Kconfig-level) broken.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... so that it could set both ->f_flags and ->f_mode, without callers
having to set ->f_flags manually.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Using this helper allows us to avoid the in-kernel calls to the
compat_sys_{f,}statfs64() sycalls, as are necessary for parameter
mangling in arm64's compat handling.
Following the example of ksys_* functions, kcompat_sys_* functions are
intended to be a drop-in replacement for their compat_sys_*
counterparts, with the same calling convention.
This is necessary to enable conversion of arm64's syscall handling to
use pt_regs wrappers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Will Deacon <will.deacon@arm.com>
Using this helper allows us to avoid the in-kernel call to the
sys_personality() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_personality().
Since ksys_personality is trivial, it is implemented directly in
<linux/syscalls.h>, as we do for ksys_close() and friends.
This helper is necessary to enable conversion of arm64's syscall
handling to use pt_regs wrappers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Martin <dave.martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
LAG devices (team or bond) recognize for each one of their slave devices
whether LAG traffic is going to be sent through that device. Bond calls
such devices "active", team calls them "txable". When this state
changes, a NETDEV_CHANGELOWERSTATE notification is distributed, together
with a netdev_notifier_changelowerstate_info structure that for LAG
devices includes a tx_enabled flag that refers to the new state. The
notification thus makes it possible to react to the changes in txability
in drivers.
However there's no way to query txability from the outside on demand.
That is problematic namely for mlxsw, which when resolving ERSPAN packet
path, may encounter a LAG device, and needs to determine which of the
slaves it should choose.
To that end, introduce a new function, net_lag_port_dev_txable(), which
determines whether a given slave device is "active" or
"txable" (depending on the flavor of the LAG device). That function then
dispatches to per-LAG-flavor helpers, bond_is_active_slave_dev() resp.
team_port_dev_txable().
Because there currently is no good place where net_lag_port_dev_txable()
should be added, introduce a new header file, lag.h, which should from
now on hold any logic common to both team and bond. (But keep
netif_is_lag_master() together with the rest of netif_is_*_master()
functions).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A follow-up patch adds a new entry point, team_port_dev_txable(). Making
it an ordinary exported function would mean that any module that may
need the service in one of the supported configurations also
unconditionally needs to pull in the team module, whether or not the
user actually intends to create team interfaces.
To prevent that, team_port_dev_txable() is defined in if_team.h, and
therefore all dependencies of that function also need to be
publicly-visible.
Therefore move team_port_get_rcu() from team.c to if_team.h.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
L2 Fwd Offload & 10GbE Intel Driver Updates 2018-07-09
This patch series is meant to allow support for the L2 forward offload, aka
MACVLAN offload without the need for using ndo_select_queue.
The existing solution currently requires that we use ndo_select_queue in
the transmit path if we want to associate specific Tx queues with a given
MACVLAN interface. In order to get away from this we need to repurpose the
tc_to_txq array and XPS pointer for the MACVLAN interface and use those as
a means of accessing the queues on the lower device. As a result we cannot
offload a device that is configured as multiqueue, however it doesn't
really make sense to configure a macvlan interfaced as being multiqueue
anyway since it doesn't really have a qdisc of its own in the first place.
The big changes in this set are:
Allow lower device to update tc_to_txq and XPS map of offloaded MACVLAN
Disable XPS for single queue devices
Replace accel_priv with sb_dev in ndo_select_queue
Add sb_dev parameter to fallback function for ndo_select_queue
Consolidated ndo_select_queue functions that appeared to be duplicates
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After already supporting a simple implementation of buffered writes for
the blocksize == PAGE_SIZE case in the last commit this adds full support
even for smaller block sizes. There are three bits of per-block
information in the buffer_head structure that really matter for the iomap
read and write path:
- uptodate status (BH_uptodate)
- marked as currently under read I/O (BH_Async_Read)
- marked as currently under write I/O (BH_Async_Write)
Instead of having new per-block structures this now adds a per-page
structure called struct iomap_page to track this information in a slightly
different form:
- a bitmap for the per-block uptodate status. For worst case of a 64k
page size system this bitmap needs to contain 128 bits. For the
typical 4k page size case it only needs 8 bits, although we still
need a full unsigned long due to the way the atomic bitmap API works.
- two atomic_t counters are used to track the outstanding read and write
counts
There is quite a bit of boilerplate code as the buffered I/O path uses
various helper methods, but the actual code is very straight forward.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull libata fixes from Tejun Heo:
- Jens's patches to expand the usable command depth from 31 to 32 broke
sata_fsl due to a subtle command iteration bug. Fixed by introducing
explicit iteration helpers and using the correct variant.
- On some laptops, enabling LPM by default reportedly led to occasional
hard hangs. Blacklist the affected cases.
- Other misc fixes / changes.
* 'for-4.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: Remove depends on HAS_DMA in case of platform dependency
ata: Fix ZBC_OUT all bit handling
ata: Fix ZBC_OUT command block check
ahci: Add Intel Ice Lake LP PCI ID
ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS
sata_nv: remove redundant pointers sdev0 and sdev1
sata_fsl: remove dead code in tag retrieval
sata_fsl: convert to command iterator
libata: convert eh to command iterators
libata: add command iterator helpers
ata: ahci_mvebu: ahci_mvebu_stop_engine() can be static
libahci: Fix possible Spectre-v1 pmp indexing in ahci_led_store()
ata_sff_data_xfer_noirq() is invoked via the ->sff_data_xfer hook. The
latter is invoked by ata_pio_sector(), atapi_send_cdb() and
__atapi_pio_bytes() which in turn is invoked by ata_sff_hsm_move().
The latter function requires that the "ap->lock" lock is held which
needs to be taken with disabled interrupts.
There is no need have to have ata_sff_data_xfer_noirq() which invokes
ata_sff_data_xfer32() with disabled interrupts because at this point the
interrupts are already disabled.
Remove the function and its references to it and replace all callers
with ata_sff_data_xfer32().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Here are a few char/misc driver fixes for 4.18-rc5.
The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
caused breakages for some people. Thanks to Xiubo Li for fixing them
quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
where Rafael is offering to help out with reviewing driver core patches.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW0Xg+Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynuzwCeP5imDvO+/phRkeuwpchIusaBZDIAoIsVjdoa
UXNqthmixT4kmZzkdw4/
=NB+C
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are a few char/misc driver fixes for 4.18-rc5.
The "largest" stuff here is fixes for the UIO changes in 4.18-rc1 that
caused breakages for some people. Thanks to Xiubo Li for fixing them
quickly. Other than that, minor fixes for thunderbolt, vmw_balloon,
nvmem, mei, ibmasm, and mei drivers. There's also a MAINTAINERS update
where Rafael is offering to help out with reviewing driver core
patches.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Don't let a NULL cell_id for nvmem_cell_get() crash us
thunderbolt: Notify userspace when boot_acl is changed
uio: fix crash after the device is unregistered
uio: change to use the mutex lock instead of the spin lock
uio: use request_threaded_irq instead
fpga: altera-cvp: Fix an error handling path in 'altera_cvp_probe()'
ibmasm: don't write out of bounds in read handler
MAINTAINERS: Add myself as driver core changes reviewer
mei: discard messages from not connected client during power down.
vmw_balloon: fix inflation with batching
Once a new slave device is detected, match it against all sub-nodes of the
master bus controller. If a match is found, set the slave device's of_node
pointer.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Failure of ->open() should *not* be followed by fput(). Fixed by
using filp_clone_open(), which gets the cleanups right.
Cc: stable@vger.kernel.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
it's exactly the same thing as
dentry_open(&file->f_path, file->f_flags, file->f_cred)
... and rename it to file_clone_open(), while we are at it.
'filp' naming convention is bogus; sure, it's "file pointer",
but we generally don't do that kind of Hungarian notation.
Some of the instances have too many callers to touch, but this
one has only two, so let's sanitize it while we can...
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This adds a global netfilter function to extract a conntrack tuple from an
skb. The function uses a new function added to nf_ct_hook, which will try
to get the tuple from skb->_nfct, and do a full lookup if that fails. This
makes it possible to use the lookup function before the skb has passed
through the conntrack init hooks (e.g., in an ingress qdisc). The tuple is
copied to the caller to avoid issues with reference counting.
The function returns false if conntrack is not loaded, allowing it to be
used without incurring a module dependency on conntrack. This is used by
the NAT mode in sch_cake.
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The target core runs into a warning in the linux/sbitmap.h
file in some configurations:
In file included from include/target/target_core_base.h:7,
from drivers/target/target_core_fabric_lib.c:41:
include/linux/sbitmap.h:331:46: error: 'struct seq_file' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
void sbitmap_show(struct sbitmap *sb, struct seq_file *m);
^~~~~~~~
In general, headers should not depend on others being included first,
so this fixes it with a forward declaration for that struct name, but
we probably want to merge the patch through the scsi tree to help
bisection.
Fixes: 10e9cbb6b5 ("scsi: target: Convert target drivers to use sbitmap")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Each PMU has a set of 32bit event counters. But in some
special cases, the events could be counted using counters
which are effectively 64bit wide.
e.g, Arm V8 PMUv3 has a 64 bit cycle counter which can count
only the CPU cycles. Also, the PMU can chain the event counters
to effectively count as a 64bit counter.
Add support for tracking the events that uses 64bit counters.
This only affects the periods set for each counter in the core
driver.
Cc: Will Deacon <will.deacon@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Convert the {read/write}_counter APIs to handle 64bit values
to enable supporting chained event counters. The backends still
use 32bit values and we pass them 32bit values only. So in effect
there are no functional changes.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Each PMU defines their max_period of the counter as the maximum
value that can be counted. Since all the PMU backends support
32bit counters by default, let us remove the redundant field.
No functional changes.
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
I got confused by all the various CONFIG options here about and
conflated CONFIG_LOCKUP_DETECTOR and CONFIG_SOFTLOCKUP_DETECTOR.
This results in a build failure for:
CONFIG_LOCKUP_DETECTOR=y && CONFIG_SOFTLOCKUP_DETECTOR=n
As reported by Abdul.
Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next <linux-next@vger.kernel.org>
Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org>
Cc: mpe <mpe@ellerman.id.au>
Cc: sachinp <sachinp@linux.vnet.ibm.com>
Cc: stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 9cf57731b6 ("watchdog/softlockup: Replace "watchdog/%u" threads with cpu_stop_work")
Link: http://lkml.kernel.org/r/20180710114210.GI2476@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we use the driver core to stop deferred probe for missing
drivers, IOMMU_OF_DECLARE can be removed.
This is slightly less optimal than having a list of built-in drivers in
that we'll now defer probe twice before giving up. This shouldn't have a
significant impact on boot times as past discussions about deferred
probe have given no evidence of deferred probe having a substantial
impact.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deferred probe will currently wait forever on dependent devices to probe,
but sometimes a driver will never exist. It's also not always critical for
a driver to exist. Platforms can rely on default configuration from the
bootloader or reset defaults for things such as pinctrl and power domains.
This is often the case with initial platform support until various drivers
get enabled. There's at least 2 scenarios where deferred probe can render
a platform broken. Both involve using a DT which has more devices and
dependencies than the kernel supports. The 1st case is a driver may be
disabled in the kernel config. The 2nd case is the kernel version may
simply not have the dependent driver. This can happen if using a newer DT
(provided by firmware perhaps) with a stable kernel version. Deferred
probe issues can be difficult to debug especially if the console has
dependencies or userspace fails to boot to a shell.
There are also cases like IOMMUs where only built-in drivers are
supported, so deferring probe after initcalls is not needed. The IOMMU
subsystem implemented its own mechanism to handle this using OF_DECLARE
linker sections.
This commit adds makes ending deferred probe conditional on initcalls
being completed or a debug timeout. Subsystems or drivers may opt-in by
calling driver_deferred_probe_check_init_done() instead of
unconditionally returning -EPROBE_DEFER. They may use additional
information from DT or kernel's config to decide whether to continue to
defer probe or not.
The timeout mechanism is intended for debug purposes and WARNs loudly.
The remaining deferred probe pending list will also be dumped after the
timeout. Not that this timeout won't work for the console which needs
to be enabled before userspace starts. However, if the console's
dependencies are resolved, then the kernel log will be printed (as
opposed to no output).
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All users now register platform devices using the ti-aemif driver.
Remove the handcrafted aemif API.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add support for RTC mode to low level suspend code. This includes
providing the rtc base address for the assembly code to configuring the
PMIC_PWR_EN line late in suspend to enter RTC+DDR mode.
Note: This patch also fold in left out space parameter for
am33xx_emif_sram_table and am43xx_emif_sram_table
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add an argument to the sleep33xx and sleep43xx code to allow us to set
flags to determine which portions of the code get called in order to use
the same code for multiple power saving modes. This patch allows us to
decide whether or not we flush and disable caches, save EMIF context,
put the memory into self refresh and disable the EMIF, and/or invoke
the wkup_m3 when entering into WFI.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The dra76x MCAN generic interconnect module has a its own
format for the bits in the control registers.
Therefore add a new module type, new regbits and new capabilities
specific to the MCAN module.
Acked-by: Rob Herring <robh@kernel.org>
CC: Tony Lindgren <tony@atomide.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
More features for 4.19:
- Use core pcie functionality rather than duplicating our own for pcie
gens and lanes
- Scheduler function naming cleanups
- More documentation
- Reworked DC/Powerplay interfaces to improve power savings
- Initial stutter mode support for RV (power feature)
- Vega12 powerplay updates
- GFXOFF fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705221447.2807-1-alexander.deucher@amd.com
Pull HID fixes from Jiri Kosina:
- spectrev1 pattern fix in hiddev from Gustavo A. R. Silva
- bounds check fix for hid-debug from Daniel Rosenberg
- regression fix for HID autobinding from Benjamin Tissoires
- removal of excessive logging from i2c-hid driver from Jason Andryuk
- fix specific to 2nd generation of Wacom Intuos devices from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hiddev: fix potential Spectre v1
HID: i2c-hid: Fix "incomplete report" noise
HID: wacom: Correct touch maximum XY of 2nd-gen Intuos
HID: debug: check length before copy_to_user()
HID: core: allow concurrent registration of drivers
nf_hook() can free the skb, so we need to remove it from the list before
calling, and add passed skbs to a sublist afterwards.
Fixes: 17266ee939 ("net: ipv4: listified version of ip_rcv")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.
The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This change makes it so that we can support the concept of subordinate
device traffic classes to the core networking code. In doing this we can
start pulling out the driver specific bits needed to support selecting a
queue based on an upper device.
The solution at is currently stands is only partially implemented. I have
the start of some XPS bits in here, but I would still need to allow for
configuration of the XPS maps on the queues reserved for the subordinate
devices. For now I am using the reference to the sb_dev XPS map as just a
way to skip the lookup of the lower device XPS map for now as that would
result in the wrong queue being picked.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch is meant to provide the basic tools needed to allow us to create
subordinate device traffic classes. The general idea here is to allow
subdividing the queues of a device into queue groups accessible through an
upper device such as a macvlan.
The idea here is to enforce the idea that an upper device has to be a
single queue device, ideally with IFF_NO_QUQUE set. With that being the
case we can pretty much guarantee that the tc_to_txq mappings and XPS maps
for the upper device are unused. As such we could reuse those in order to
support subdividing the lower device and distributing those queues between
the subordinate devices.
In order to distinguish between a regular set of traffic classes and if a
device is carrying subordinate traffic classes I changed num_tc from a u8
to a s16 value and use the negative values to represent the subordinate
pool values. So starting at -1 and running to -32768 we can encode those as
pool values, and the existing values of 0 to 15 can be maintained.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
'cmd_pause' DMA channel capability means that respective DMA engine
supports both pausing and resuming given DMA channel. However, in some
cases it is important to know if DMA channel can be paused without the
need to resume it. This is a typical requirement for proper residue
reading on transfer timeout in UART drivers. There are also some DMA
engines with limited hardware, which doesn't really support resuming.
Reporting pause and resume capabilities separately allows UART drivers to
properly check for the really required capabilities and operate in DMA
mode also in systems with limited DMA hardware. On the other hand drivers,
which rely on full channel suspend/resume support, should now check for
both 'pause' and 'resume' features.
Existing clients of dma_get_slave_caps() have been checked and the only
driver which rely on proper channel resuming is soc-generic-dmaengine-pcm
driver, which has been updated to check the newly added capability.
Existing 'cmd_pause' now only indicates that DMA engine support pausing
given DMA channel.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Current IO controllers for the block layer are less than ideal for our
use case. The io.max controller is great at hard limiting, but it is
not work conserving. This patch introduces io.latency. You provide a
latency target for your group and we monitor the io in short windows to
make sure we are not exceeding those latency targets. This makes use of
the rq-qos infrastructure and works much like the wbt stuff. There are
a few differences from wbt
- It's bio based, so the latency covers the whole block layer in addition to
the actual io.
- We will throttle all IO types that comes in here if we need to.
- We use the mean latency over the 100ms window. This is because writes can
be particularly fast, which could give us a false sense of the impact of
other workloads on our protected workload.
- By default there's no throttling, we set the queue_depth to INT_MAX so that
we can have as many outstanding bio's as we're allowed to. Only at
throttle time do we pay attention to the actual queue depth.
- We backcharge cgroups for root cg issued IO and induce artificial
delays in order to deal with cases like metadata only or swap heavy
workloads.
In testing this has worked out relatively well. Protected workloads
will throttle noisy workloads down to 1 io at time if they are doing
normal IO on their own, or induce up to a 1 second delay per syscall if
they are doing a lot of root issued IO (metadata/swap IO).
Our testing has revolved mostly around our production web servers where
we have hhvm (the web server application) in a protected group and
everything else in another group. We see slightly higher requests per
second (RPS) on the test tier vs the control tier, and much more stable
RPS across all machines in the test tier vs the control tier.
Another test we run is a slow memory allocator in the unprotected group.
Before this would eventually push us into swap and cause the whole box
to die and not recover at all. With these patches we see slight RPS
drops (usually 10-15%) before the memory consumer is properly killed and
things recover within seconds.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg-qos is going to do essentially what wbt does, only on a cgroup
basis. Break out the common code that will be shared between blkcg-qos
and wbt into blk-rq-qos.* so they can both utilize the same
infrastructure.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Memory allocations can induce swapping via kswapd or direct reclaim. If
we are having IO done for us by kswapd and don't actually go into direct
reclaim we may never get scheduled for throttling. So instead check to
see if our cgroup is congested, and if so schedule the throttling.
Before we return to user space the throttling stuff will only throttle
if we actually required it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since IO can be issued from literally anywhere it's almost impossible to
do throttling without having some sort of adverse effect somewhere else
in the system because of locking or other dependencies. The best way to
solve this is to do the throttling when we know we aren't holding any
other kernel resources. Do this by tracking throttling in a per-blkg
basis, and if we require throttling flag the task that it needs to check
before it returns to user space and possibly sleep there.
This is to address the case where a process is doing work that is
generating IO that can't be throttled, whether that is directly with a
lot of REQ_META IO, or indirectly by allocating so much memory that it
is swamping the disk with REQ_SWAP. We can't use task_add_work as we
don't want to induce a memory allocation in the IO path, so simply
saving the request queue in the task and flagging it to do the
notify_resume thing achieves the same result without the overhead of a
memory allocation.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For backcharging we need to know who the page belongs to when swapping
it out. We don't worry about things that do ->rw_page (zram etc) at the
moment, we're only worried about pages that actually go to a block
device.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like REQ_META, it's important to know the IO coming down is swap
in order to guard against potential IO priority inversion issues with
cgroups. Add REQ_SWAP and use it for all swap IO, and add it to our
bio_issue_as_root_blkg helper.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk-iolatency has a few stats that it would like to print out, and
instead of adding a bunch of crap to the generic code just provide a
helper so that controllers can add stuff to the stat line if they want
to.
Hide it behind a boot option since it changes the output of io.stat from
normal, and these stats are only interesting to developers.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
