Since mlc->lcv_t is only interested in seconds, directly using time64_t
here.
This gets rid of the deprecated do_gettimeofday() and avoids problems
with time going backwards since we now use the monotonic clocksource.
Signed-off-by: WEN Pingbo <pingbo.wen@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patchwork-Id: 10076611
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Move errseq.rst into core-api
- Add errseq to the core-api index
- Promote the header to a more prominent header type, otherwise we get three
entries in the table of contents.
- Reformat the table to look nicer and be a little more proportional in
terms of horizontal width per bit (the SF bit is still disproportionately
large, but there's no way to fix that).
- Include errseq kernel-doc in the errseq.rst
- Neaten some kernel-doc markup
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Replace spaces with tabs in the definition of AT24_FLAG_NO_RDROL.
Fixes: 9d404411091c ("eeprom: at24: support eeproms that do not auto-rollover reads")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Some multi-address eeproms in the at24 family may not automatically
roll-over reads to the next slave address. On those eeproms, reads
that straddle slave boundaries will not work correctly.
Solution:
Mark such eeproms with a flag that prevents reads straddling
slave boundaries. Add the AT24_FLAG_NO_RDROL flag to the eeprom
entry in the device_id table, or add 'no-read-rollover' to the
eeprom devicetree entry.
Note that I have not personally enountered an at24 chip that
does not support read rollovers. They may or may not exist.
However, my hardware requires this functionality because of
a quirk.
Signed-off-by: Sven Van Asbroeck <svendev@arcx.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull timer fixes from Thomas Gleixner:
"A pile of fixes for long standing issues with the timer wheel and the
NOHZ code:
- Prevent timer base confusion accross the nohz switch, which can
cause unlocked access and data corruption
- Reinitialize the stale base clock on cpu hotplug to prevent subtle
side effects including rollovers on 32bit
- Prevent an interrupt storm when the timer softirq is already
pending caused by tick_nohz_stop_sched_tick()
- Move the timer start tracepoint to a place where it actually makes
sense
- Add documentation to timerqueue functions as they caused confusion
several times now"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timerqueue: Document return values of timerqueue_add/del()
timers: Invoke timer_start_debug() where it makes sense
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
timers: Reinitialize per cpu bases on hotplug
timers: Use deferrable base independent of base::nohz_active
Pull irq fixes from Thomas Gleixner:
"A rather large update after the kaisered maintainer finally found time
to handle regression reports.
- The larger part addresses a regression caused by the x86 vector
management rework.
The reservation based model does not work reliably for MSI
interrupts, if they cannot be masked (yes, yet another hw
engineering trainwreck). The reason is that the reservation mode
assigns a dummy vector when the interrupt is allocated and switches
to a real vector when the interrupt is requested.
If the MSI entry cannot be masked then the initialization might
raise an interrupt before the interrupt is requested, which ends up
as spurious interrupt and causes device malfunction and worse. The
fix is to exclude MSI interrupts which do not support masking from
reservation mode and assign a real vector right away.
- Extend the extra lockdep class setup for nested interrupts with a
class for the recently added irq_desc::request_mutex so lockdep can
differeniate and does not emit false positive warnings.
- A ratelimit guard for the bad irq printout so in case a bad irq
comes back immediately the system does not drown in dmesg spam"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI
genirq/irqdomain: Rename early argument of irq_domain_activate_irq()
x86/vector: Use IRQD_CAN_RESERVE flag
genirq: Introduce IRQD_CAN_RESERVE flag
genirq/msi: Handle reactivation only on success
gpio: brcmstb: Make really use of the new lockdep class
genirq: Guard handle_bad_irq log messages
kernel/irq: Extend lockdep class for request mutex
Report to the user ifindex and namespace information of offloaded
programs. If device has disappeared return -ENODEV. Specify the
namespace using dev/inode combination.
CC: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ns_get_path() takes struct task_struct and proc_ns_ops as its
parameters. For path resolution directly from a namespace,
e.g. based on a networking device's net name space, we need
more flexibility. Add a ns_get_path_cb() helper which will
allow callers to use any method of obtaining the name space
reference. Convert ns_get_path() to use ns_get_path_cb().
Following patches will bring a networking user.
CC: Eric W. Biederman <ebiederm@xmission.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Bound programs are quite useless after their device disappears.
They are simply waiting for reference count to go to zero,
don't list them in BPF_PROG_GET_NEXT_ID by freeing their ID
early.
Note that orphaned offload programs will return -ENODEV on
BPF_OBJ_GET_INFO_BY_FD so user will never see ID 0.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
To allow verifier instruction callbacks without any extra locking
NETDEV_UNREGISTER notification would wait on a waitqueue for verifier
to finish. This design decision was made when rtnl lock was providing
all the locking. Use the read/write lock instead and remove the
workqueue.
Verifier will now call into the offload code, so dev_ops are moved
to offload structure. Since verifier calls are all under
bpf_prog_is_dev_bound() we no longer need static inline implementations
to please builds with CONFIG_NET=n.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We currently use aux->offload to indicate that program is bound
to a specific device. This forces us to keep the offload structure
around even after the device is gone. Add a bool member to
struct bpf_prog_aux to indicate if offload was requested.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alter the DaVinci GPIO recovery fetch to use descriptors
all the way down into the board files.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Pull x86 page table isolation updates from Thomas Gleixner:
"This is the final set of enabling page table isolation on x86:
- Infrastructure patches for handling the extra page tables.
- Patches which map the various bits and pieces which are required to
get in and out of user space into the user space visible page
tables.
- The required changes to have CR3 switching in the entry/exit code.
- Optimizations for the CR3 switching along with documentation how
the ASID/PCID mechanism works.
- Updates to dump pagetables to cover the user space page tables for
W+X scans and extra debugfs files to analyze both the kernel and
the user space visible page tables
The whole functionality is compile time controlled via a config switch
and can be turned on/off on the command line as well"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/ldt: Make the LDT mapping RO
x86/mm/dump_pagetables: Allow dumping current pagetables
x86/mm/dump_pagetables: Check user space page table for WX pages
x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy
x86/mm/pti: Add Kconfig
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled
x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming
x86/mm: Use INVPCID for __native_flush_tlb_single()
x86/mm: Optimize RESTORE_CR3
x86/mm: Use/Fix PCID to optimize user/kernel switches
x86/mm: Abstract switching CR3
x86/mm: Allow flushing for future ASID switches
x86/pti: Map the vsyscall page if needed
x86/pti: Put the LDT in its own PGD if PTI is on
x86/mm/64: Make a full PGD-entry size hole in the memory map
x86/events/intel/ds: Map debug buffers in cpu_entry_area
x86/cpu_entry_area: Add debugstore entries to cpu_entry_area
x86/mm/pti: Map ESPFIX into user space
x86/mm/pti: Share entry text PMD
x86/entry: Align entry text section to PMD boundary
...
The timer wheel bases are not (re)initialized on CPU hotplug. That leaves
them with a potentially stale clk and next_expiry valuem, which can cause
trouble then the CPU is plugged.
Add a prepare callback which forwards the clock, sets next_expiry to far in
the future and reset the control flags to a known state.
Set base->must_forward_clk so the first timer which is queued will try to
forward the clock to current jiffies.
Fixes: 500462a9de ("timers: Switch to a non-cascading wheel")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272152200.2431@nanos
net/ipv6/ip6_gre.c is a case of parallel adds.
include/trace/events/tcp.h is a little bit more tricky. The removal
of in-trace-macro ifdefs in 'net' paralleled with moving
show_tcp_state_name and friends over to include/trace/events/sock.h
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'early' argument of irq_domain_activate_irq() is actually used to
denote reservation mode. To avoid confusion, rename it before abuse
happens.
No functional change.
Fixes: 7249164346 ("genirq/irqdomain: Update irq_domain_ops.activate() signature")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandru Chirvasitu <achirvasub@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
Add a new flag to mark interrupts which can use reservation mode. This is
going to be used in subsequent patches to disable reservation mode for a
certain class of MSI devices.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandru Chirvasitu <achirvasub@gmail.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mikael Pettersson <mikpelinux@gmail.com>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: Mihai Costache <v-micos@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-pci@vger.kernel.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Simon Xiao <sixiao@microsoft.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: devel@linuxdriverproject.org
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Sakari Ailus <sakari.ailus@intel.com>,
Cc: linux-media@vger.kernel.org
This fixes a schedutil cpufreq governor regression from the 4.14
cycle that may cause a CPU idleness check to return incorrect results
in some cases which leads to suboptimal decisions (Joel Fernandes).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TPkr
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes a schedutil cpufreq governor regression from the 4.14 cycle
that may cause a CPU idleness check to return incorrect results in
some cases which leads to suboptimal decisions (Joel Fernandes)"
* tag 'pm-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Use idle_calls counter of the remote CPU
- cxgb4 fix for an iser testing failure as debugged by Steve and Sagi.
The problem was a driver bug in the handling of shutting down a QP.
- Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on error
unwind and a use after free bug
- Improper congestion counter values on mlx5 when link aggregation is enabled
- ipoib lockdep regression introduced in this merge window
- hfi1 regression supporting the device in a VM introduced in a recent patch
- Typo that breaks future uAPI compatibility in the verbs core
- More SELinux related oops fixing
- Fix an oops during error unwind in mlx5
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IkGi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"This is the next batch of for-rc patches from RDMA. It includes the
fix for the ipoib regression I mentioned last time, and the result of
a fairly major debugging effort to get iser working reliably on cxgb4
hardware - it turns out the cxgb4 driver was not handling QP error
flushing properly causing iser to fail.
- cxgb4 fix for an iser testing failure as debugged by Steve and
Sagi. The problem was a driver bug in the handling of shutting down
a QP.
- Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on
error unwind and a use after free bug
- Improper congestion counter values on mlx5 when link aggregation is
enabled
- ipoib lockdep regression introduced in this merge window
- hfi1 regression supporting the device in a VM introduced in a
recent patch
- Typo that breaks future uAPI compatibility in the verbs core
- More SELinux related oops fixing
- Fix an oops during error unwind in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Fix mlx5_ib_alloc_mr error flow
IB/core: Verify that QP is security enabled in create and destroy
IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()
IB/mlx5: Serialize access to the VMA list
IB/hfi: Only read capability registers if the capability exists
IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush
IB/mlx5: Fix congestion counters in LAG mode
RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy
RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning
RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path
iw_cxgb4: when flushing, complete all wrs in a chain
iw_cxgb4: reflect the original WR opcode in drain cqes
iw_cxgb4: Only validate the MSN for successful completions
mlx5 shared code for both rdma-next and net-next trees.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaRXPQAAoJEEg/ir3gV/o+H4wH/2CkV3tOLfRekNd4CFSoH78A
zH0Gjwa3P7aXybTmhXbMNCYLEoVEZ5pSlToOmjz1FrmxhH62JQ80WyKOcYtiHMBg
3x5tFZboLc9tMGwPhyBJBjyiH+Gh9ZMoD6hBFgSvIG/hNPUb1W48/Pc+R61gOrMw
6ADU+6mIf5cHNQ4c/V/SBlfiQjSXN4Y38knhTeZy8dLcZZVg1eMn+pj7W/haAyb6
t3IMEaUmlDYwQmtxTT2snK4VutEPfxYGv1gyKSkZXmY74aRvSzlgV7PqXM3qsV4W
8ZEhEHZJGi6NXC2hk5FQSSPWhQOhAmpjTHm8aImK0SIf68YajjzaZnT9S+eMmdY=
=uMjj
-----END PGP SIGNATURE-----
Merge tag 'mlx5-shared-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 E-Switch updates 2017-12-19
This series includes updates for mlx5 E-Switch infrastructures,
to be merged into net-next and rdma-next trees.
Mark's patches provide E-Switch refactoring that generalize the mlx5
E-Switch vf representors interfaces and data structures. The serious is
mainly focused on moving ethernet (netdev) specific representors logic out
of E-Switch (eswitch.c) into mlx5e representor module (en_rep.c), which
provides better separation and allows future support for other types of vf
representors (e.g. RDMA).
Gal's patches at the end of this serious, provide a simple syntax fix and
two other patches that handles vport ingress/egress ACL steering name
spaces to be aligned with the Firmware/Hardware specs.
V1->V2:
- Addressed coding style comments in patches #1 and #7
- The series is still based on rc4, as now I see net-next is also @rc4.
V2->V3:
- Fixed compilation warning, reported by Dave.
Please pull and let me know if there's any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
divider_recalc_rate() is an helper function used by clock divider of
different types, so the structure containing the 'hw' pointer is not
always a 'struct clk_divider'
At the following line:
> div = _get_div(table, val, flags, divider->width);
in several cases, the value of 'divider->width' is garbage as the actual
structure behind this memory is not a 'struct clk_divider'
Fortunately, this width value is used by _get_val() only when
CLK_DIVIDER_MAX_AT_ZERO flag is set. This has never been the case so
far when the structure is not a 'struct clk_divider'. This is probably
why we did not notice this bug before
Fixes: afe76c8fd0 ("clk: allow a clk divider with max divisor when zero")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Each vport has its own root flow table for the ACL flow tables and root
flow table is per namespace, therefore we should create a namespace for
each vport.
Fixes: efdc810ba3 ("net/mlx5: Flow steering, Add vport ACL support")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This patch extends the alloc context flow to be prepared for working
with dynamic UAR allocations.
Currently upon alloc context there is some fix size of UARs that are
allocated (named 'static allocation') and there is no option to user
application to ask for more or control which UAR will be used by which
QP.
In this patch the driver prepares its data structures to manage both the
static and the dynamic allocations and let the user driver knows about
the max value of dynamic blue-flame registers that are allowed.
Downstream patches from this series will enable the dynamic allocation
and the association as part of QP creation.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the recent remote cpufreq callback work, its possible that a cpufreq
update is triggered from a remote CPU. For single policies however, the current
code uses the local CPU when trying to determine if the remote sg_cpu entered
idle or is busy. This is incorrect. To remedy this, compare with the nohz tick
idle_calls counter of the remote CPU.
Fixes: 674e75411f (sched: cpufreq: Allow remote cpufreq callbacks)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Adds a start argument to the shm_register callback to allow the callback
to check memory type of the passed pages.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Patches for 4.16 that are dependent on patches sent to 4.15-rc.
These are small clean ups for the vmw_pvrdma and i40iw drivers.
* 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git:
RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header
RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t
RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc
RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic
RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file
i40iw: Change accelerated flag to bool
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-28
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Fix incorrect state pruning related to recognition of zero initialized
stack slots, where stacksafe exploration would mistakenly return a
positive pruning verdict too early ignoring other slots, from Gianluca.
2) Various BPF to BPF calls related follow-up fixes. Fix an off-by-one
in maximum call depth check, and rework maximum stack depth tracking
logic to fix a bypass of the total stack size check reported by Jann.
Also fix a bug in arm64 JIT where prog->jited_len was uninitialized.
Addition of various test cases to BPF selftests, from Alexei.
3) Addition of a BPF selftest to test_verifier that is related to BPF to
BPF calls which demonstrates a late caller stack size increase and
thus out of bounds access. Fixed above in 2). Test case from Jann.
4) Addition of correlating BPF helper calls, BPF to BPF calls as well
as BPF maps to bpftool xlated dump in order to allow for better
BPF program introspection and debugging, from Daniel.
5) Fixing several bugs in BPF to BPF calls kallsyms handling in order
to get it actually to work for subprogs, from Daniel.
6) Extending sparc64 JIT support for BPF to BPF calls and fix a couple
of build errors for libbpf on sparc64, from David.
7) Allow narrower context access for BPF dev cgroup typed programs in
order to adapt to LLVM code generation. Also adjust memlock rlimit
in the test_dev_cgroup BPF selftest, from Yonghong.
8) Add netdevsim Kconfig entry to BPF selftests since test_offload.py
relies on netdevsim device being available, from Jakub.
9) Reduce scope of xdp_do_generic_redirect_map() to being static,
from Xiongwei.
10) Minor cleanups and spelling fixes in BPF verifier, from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of computing max stack depth for current call chain
during the main verifier pass track stack depth of each
function independently and after do_check() is done do
another pass over all instructions analyzing depth
of all possible call stacks.
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-12-22
1) Separate ESP handling from segmentation for GRO packets.
This unifies the IPsec GSO and non GSO codepath.
2) Add asynchronous callbacks for xfrm on layer 2. This
adds the necessary infrastructure to core networking.
3) Allow to use the layer2 IPsec GSO codepath for software
crypto, all infrastructure is there now.
4) Also allow IPsec GSO with software crypto for local sockets.
5) Don't require synchronous crypto fallback on IPsec offloading,
it is not needed anymore.
6) Check for xdo_dev_state_free and only call it if implemented.
From Shannon Nelson.
7) Check for the required add and delete functions when a driver
registers xdo_dev_ops. From Shannon Nelson.
8) Define xfrmdev_ops only with offload config.
From Shannon Nelson.
9) Update the xfrm stats documentation.
From Shannon Nelson.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As suggested by Rob Herring [1] rename the previously introduced
reset-{,post-}delay-us bindings to the clearer reset-{,de}assert-us
[1] https://patchwork.kernel.org/patch/10104905/
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the hwlock id 0 is valid for hardware spinlock core, but now id 0
is treated as one invalid value for regmap. Thus we should add one extra
flag for regmap config to indicate if a hardware spinlock should be used,
then id 0 can be valid for regmap to request.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
ASSERT_RTNL() macro is actual open-coded variant of WARN_ONCE() with
two exceptions. First, it prints stack for multiple hits and not only
once as WARN_ONCE() does. Second, the user can disable prints of
WARN_ONCE by setting CONFIG_BUG to N.
The multiple prints of dump stack are actually not needed, because calls
without rtnl lock are programming errors and user can't do anything
about them except to complain to the mailing list after first occurrence
of such failure.
The user who disabled BUG/WARN prints did it explicitly because by default
in upstream kernel and distributions this option is enabled. It means
that user doesn't want to see prints about missing locks too.
This patch replaces open-coded variant in favor of already existing
macro and change error prints to be once only.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original purpose of the per-superblock d_anon list was to
keep disconnected dentries in the cache between consecutive
requests to the NFS server. Dentries can be disconnected if
a client holds a file open and repeatedly performs IO on it,
and if the server drops the dentry, whether due to memory
pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches".
This purpose was thwarted by commit 75a6f82a0d ("freeing unlinked
file indefinitely delayed") which caused disconnected dentries
to be freed as soon as their refcount reached zero.
This means that, when a dentry being used by nfsd gets disconnected, a
new one needs to be allocated for every request (unless requests
overlap). As the dentry has no name, no parent, and no children,
there is little of value to cache. As small memory allocations are
typically fast (from per-cpu free lists) this likely has little cost.
This means that the original purpose of s_anon is no longer relevant:
there is no longer any need to keep disconnected dentries on a list so
they appear to be hashed.
However, s_anon now has a new use. When you mount an NFS filesystem,
the dentry stored in s_root is just a placebo. The "real" root dentry
is allocated using d_obtain_root() and so it kept on the s_anon list.
I don't know the reason for this, but suspect it related to NFSv4
where a mount of "server:/some/path" require NFS to look up the root
filehandle on the server, then walk down "/some" and "/path" to get
the filehandle to mount.
Whatever the reason, NFS depends on the s_anon list and on
shrink_dcache_for_umount() pruning all dentries on this list. So we
cannot simply remove s_anon.
We could just leave the code unchanged, but apart from that being
potentially confusing, the (unfair) bit-spin-lock which protects
s_anon can become a bottle neck when lots of disconnected dentries are
being created.
So this patch renames s_anon to s_roots, and stops storing
disconnected dentries on the list. Only dentries obtained with
d_obtain_root() are now stored on this list. There are many fewer of
these (only NFS and NILFS2 use the call, and only during filesystem
mount) so contention on the bit-lock will not be a problem.
Possibly an alternate solution should be found for NFS and NILFS2, but
that would require understanding their needs first.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add optional output clock DT property to enable PLL reset when a clock
output is enabled.
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Rabeeh Khoury <rabeeh@solid-run.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Pull networking fixes from David Miller"
"What's a holiday weekend without some networking bug fixes? [1]
1) Fix some eBPF JIT bugs wrt. SKB pointers across helper function
calls, from Daniel Borkmann.
2) Fix regression from errata limiting change to marvell PHY driver,
from Zhao Qiang.
3) Fix u16 overflow in SCTP, from Xin Long.
4) Fix potential memory leak during bridge newlink, from Nikolay
Aleksandrov.
5) Fix BPF selftest build on s390, from Hendrik Brueckner.
6) Don't append to cfg80211 automatically generated certs file,
always write new ones from scratch. From Thierry Reding.
7) Fix sleep in atomic in mac80211 hwsim, from Jia-Ju Bai.
8) Fix hang on tg3 MTU change with certain chips, from Brian King.
9) Add stall detection to arc emac driver and reset chip when this
happens, from Alexander Kochetkov.
10) Fix MTU limitng in GRE tunnel drivers, from Xin Long.
11) Fix stmmac timestamping bug due to mis-shifting of field. From
Fredrik Hallenberg.
12) Fix metrics match when deleting an ipv4 route. The kernel sets
some internal metrics bits which the user isn't going to set when
it makes the delete request. From Phil Sutter.
13) mvneta driver loop over RX queues limits on "txq_number" :-) Fix
from Yelena Krivosheev.
14) Fix double free and memory corruption in get_net_ns_by_id, from
Eric W. Biederman.
15) Flush ipv4 FIB tables in the reverse order. Some tables can share
their actual backing data, in particular this happens for the MAIN
and LOCAL tables. We have to kill the LOCAL table first, because
it uses MAIN's backing memory. Fix from Ido Schimmel.
16) Several eBPF verifier value tracking fixes, from Edward Cree, Jann
Horn, and Alexei Starovoitov.
17) Make changes to ipv6 autoflowlabel sysctl really propagate to
sockets, unless the socket has set the per-socket value
explicitly. From Shaohua Li.
18) Fix leaks and double callback invocations of zerocopy SKBs, from
Willem de Bruijn"
[1] Is this a trick question? "Relaxing"? "Quiet"? "Fine"? - Linus.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
skbuff: skb_copy_ubufs must release uarg even without user frags
skbuff: orphan frags before zerocopy clone
net: reevalulate autoflowlabel setting after sysctl setting
openvswitch: Fix pop_vlan action for double tagged frames
ipv6: Honor specified parameters in fibmatch lookup
bpf: do not allow root to mangle valid pointers
selftests/bpf: add tests for recent bugfixes
bpf: fix integer overflows
bpf: don't prune branches when a scalar is replaced with a pointer
bpf: force strict alignment checks for stack pointers
bpf: fix missing error return in check_stack_boundary()
bpf: fix 32-bit ALU op verification
bpf: fix incorrect tracking of register size truncation
bpf: fix incorrect sign extension in check_alu_op()
bpf/verifier: fix bounds calculation on BPF_RSH
ipv4: Fix use-after-free when flushing FIB tables
s390/qeth: fix error handling in checksum cmd callback
tipc: remove joining group member from congested list
selftests: net: Adding config fragment CONFIG_NUMA=y
nfp: bpf: keep track of the offloaded program
...
Congestion counters are counted and queried per physical function.
When working in LAG mode, CNP packets can be sent or received on both
of the functions, thus congestion counters should be aggregated from
the two physical functions.
Fixes: e1f24a79f4 ("IB/mlx5: Support congestion related counters")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
These macros are used by more than one SoC vendor platforms, avoid to
have many copies of these code, this patch moves them to the common
header file which every clock drivers can access to.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nlm_rqst.a_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the nlm_rqst.a_count it might make a difference
in following places:
- nlmclnt_release_call() and nlmsvc_release_call(): decrement
in refcount_dec_and_test() only
provides RELEASE ordering and control dependency on success
vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nlm_lockowner.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the nlm_lockowner.count it might make a difference
in following places:
- nlm_put_lockowner(): decrement in refcount_dec_and_lock() only
provides RELEASE ordering, control dependency on success and
holds a spin lock on success vs. fully ordered atomic counterpart.
No changes in spin lock guarantees.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nsm_handle.sm_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
**Important note for maintainers:
Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.
For the nsm_handle.sm_count it might make a difference
in following places:
- nsm_release(): decrement in refcount_dec_and_lock() only
provides RELEASE ordering, control dependency on success
and holds a spin lock on success vs. fully ordered atomic
counterpart. No change for the spin lock guarantees.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull block fixes from Jens Axboe:
"It's been a few weeks, so here's a small collection of fixes that
should go into the current series.
This contains:
- NVMe pull request from Christoph, with a few important fixes.
- kyber hang fix from Omar.
- A blk-throttl fix from Shaohua, fixing a case where we double
charge a bio.
- Two call_single_data alignment fixes from me, fixing up some
unfortunate changes that went into 4.14 without being properly
reviewed on the block side (since nobody was CC'ed on the
patch...).
- A bounce buffer fix in two parts, one from me and one from Ming.
- Revert bdi debug error handling patch. It's causing boot issues for
some folks, and a week down the line, we're still no closer to a
fix. Revert this patch for now until it's figured out, then we can
retry for 4.16"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "bdi: add error handle for bdi_debug_register"
null_blk: unalign call_single_data
block: unalign call_single_data in struct request
block-throttle: avoid double charge
block: fix blk_rq_append_bio
block: don't let passthrough IO go into .make_request_fn()
nvme: setup streams after initializing namespace head
nvme: check hw sectors before setting chunk sectors
nvme: call blk_integrity_unregister after queue is cleaned up
nvme-fc: remove double put reference if admin connect fails
nvme: set discard_alignment to zero
kyber: fix another domain token wait queue hang
sysctl.ip6.auto_flowlabels is default 1. In our hosts, we set it to 2.
If sockopt doesn't set autoflowlabel, outcome packets from the hosts are
supposed to not include flowlabel. This is true for normal packet, but
not for reset packet.
The reason is ipv6_pinfo.autoflowlabel is set in sock creation. Later if
we change sysctl.ip6.auto_flowlabels, the ipv6_pinfo.autoflowlabel isn't
changed, so the sock will keep the old behavior in terms of auto
flowlabel. Reset packet is suffering from this problem, because reset
packet is sent from a special control socket, which is created at boot
time. Since sysctl.ipv6.auto_flowlabels is 1 by default, the control
socket will always have its ipv6_pinfo.autoflowlabel set, even after
user set sysctl.ipv6.auto_flowlabels to 1, so reset packset will always
have flowlabel. Normal sock created before sysctl setting suffers from
the same issue. We can't even turn off autoflowlabel unless we kill all
socks in the hosts.
To fix this, if IPV6_AUTOFLOWLABEL sockopt is used, we use the
autoflowlabel setting from user, otherwise we always call
ip6_default_np_autolabel() which has the new settings of sysctl.
Note, this changes behavior a little bit. Before commit 42240901f7
(ipv6: Implement different admin modes for automatic flow labels), the
autoflowlabel behavior of a sock isn't sticky, eg, if sysctl changes,
existing connection will change autoflowlabel behavior. After that
commit, autoflowlabel behavior is sticky in the whole life of the sock.
With this patch, the behavior isn't sticky again.
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
-----BEGIN PGP SIGNATURE-----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=5u17
-----END PGP SIGNATURE-----
Merge tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/soc
Pull "arm: Updates for soc driver for v4.15-next" from Matthias Brugger:
- change kconfig entry for armv7 SoCs to be more generic
- add support for mt2701 scpsys driver
binding documentation
extend driver to allow the bus protection to overwrite the register
* tag 'v4.15-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: add MT2712 scpsys support
soc: mediatek: add dependent clock jpgdec/audio for scpsys
soc: mediatek: extend bus protection API
dt-bindings: soc: add MT2712 power dt-bindings
ARM: mediatek: use more generic prompts for SoCs with ARMv7
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
-----BEGIN PGP SIGNATURE-----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=3iwl
-----END PGP SIGNATURE-----
Merge tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee into next/drivers
Pull "tee dynamic shm for v4.16" from Jens Wiklander:
This pull request enables dynamic shared memory support in the TEE
subsystem as a whole and in OP-TEE in particular.
Global Platform TEE specification [1] allows client applications
to register part of own memory as a shared buffer between
application and TEE. This allows fast zero-copy communication between
TEE and REE. But current implementation of TEE in Linux does not support
this feature.
Also, current implementation of OP-TEE transport uses fixed size
pre-shared buffer for all communications with OP-TEE OS. This is okay
in the most use cases. But this prevents use of OP-TEE in virtualized
environments, because:
a) We can't share the same buffer between different virtual machines
b) Physically contiguous memory as seen by VM can be non-contiguous
in reality (and as seen by OP-TEE OS) due to second stage of
MMU translation.
c) Size of this pre-shared buffer is limited.
So, first part of this pull request adds generic register/unregister
interface to tee subsystem. The second part adds necessary features into
OP-TEE driver, so it can use not only static pre-shared buffer, but
whole RAM to communicate with OP-TEE OS.
This change is backwards compatible allowing older secure world or
user space to work with newer kernels and vice versa.
[1] https://www.globalplatform.org/specificationsdevice.asp
* tag 'tee-drv-dynamic-shm-for-v4.16' of https://git.linaro.org/people/jens.wiklander/linux-tee:
tee: shm: inline tee_shm_get_id()
tee: use reference counting for tee_context
tee: optee: enable dynamic SHM support
tee: optee: add optee-specific shared pool implementation
tee: optee: store OP-TEE capabilities in private data
tee: optee: add registered buffers handling into RPC calls
tee: optee: add registered shared parameters handling
tee: optee: add shared buffer registration functions
tee: optee: add page list manipulation functions
tee: optee: Update protocol definitions
tee: shm: add page accessor functions
tee: shm: add accessors for buffer size and page offset
tee: add register user memory
tee: flexible shared memory pool creation
We need to configure the interconnect target module based on the
device three configuration.
Let's also add a new quirk for SYSC_QUIRK_RESET_STATUS to indicate
that the SYSCONFIG reset bit changes after the reset is done.
Signed-off-by: Tony Lindgren <tony@atomide.com>
