The usage of in_interrupt() in non-core code is phased out. Ideally the
information of the calling context should be passed by the callers or the
functions be split as appropriate.
cfhsi_rx_desc() and cfhsi_rx_pld() use in_interrupt() to distinguish if
they should use netif_rx() or netif_rx_ni() for receiving packets.
The attempt to consolidate the code by passing an arguemnt or by
distangling it failed due lack of knowledge about this driver and because
the call chains are hard to follow.
As a stop gap use netif_rx_any_context() which invokes the correct code path
depending on context and confines the in_interrupt() usage to core code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quite some drivers make conditional decisions based on in_interrupt() to
invoke either netif_rx() or netif_rx_ni().
Conditionals based on in_interrupt() or other variants of preempt count
checks in drivers should not exist for various reasons and Linus clearly
requested to either split the code pathes or pass an argument to the
common functions which provides the context.
This is obviously the correct solution, but for some of the affected
drivers this needs a major rewrite due to their convoluted structure.
As in_interrupt() usage in drivers needs to be phased out, provide
netif_rx_any_context() as a stop gap for these drivers.
This confines the in_interrupt() conditional to core code which in turn
allows to remove the access to this check for driver code and provides one
central place to do further modifications once the driver maze is cleaned
up.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
While chasing in_interrupt() (ab)use in drivers it turned out that the
caif_spi driver has never been in use since the driver was merged 10 years
ago. There never was any matching code which provides a platform device.
The driver has not seen any update (asided of treewide changes and
cleanups) since 8 years and the maintainers vanished from the planet.
So analysing the potential contexts and the (in)correctness of
in_interrupt() usage is just a pointless exercise.
Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
enic_dev_wait() has a BUG_ON(in_interrupt()).
Chasing the callers of enic_dev_wait() revealed the gems of enic_reset()
and enic_tx_hang_reset() which are both invoked through work queues in
order to be able to call rtnl_lock(). So far so good.
After locking rtnl both functions acquire enic::enic_api_lock which
serializes against the (ab)use from infiniband. This is where the
trainwreck starts.
enic::enic_api_lock is a spin_lock() which implicitly disables preemption,
but both functions invoke a ton of functions under that lock which can
sleep. The BUG_ON(in_interrupt()) does not trigger in that case because it
can't detect the preempt disabled condition.
This clearly has never been tested with any of the mandatory debug options
for 7+ years, which would have caught that for sure.
Cure it by adding a enic_api_busy member to struct enic, which is modified
and evaluated with enic::enic_api_lock held.
If enic_api_devcmd_proxy_by_index() observes enic::enic_api_busy as true,
it drops enic::enic_api_lock and busy waits for enic::enic_api_busy to
become false.
It would be smarter to wait for a completion of that busy period, but
enic_api_devcmd_proxy_by_index() is called with other spin locks held which
obviously can't sleep.
Remove the BUG_ON(in_interrupt()) check as well because it's incomplete and
with proper debugging enabled the problem would have been caught from the
debug checks in schedule_timeout().
Fixes: 0b038566c0 ("drivers/net: enic: Add an interface for USNIC to interact with firmware")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5d5b4128c4 ("devlink: introduce flash update overwrite mask")
added a usage of _BITUL to the UAPI <linux/devlink.h> header, but failed
to include the header file where it was defined. It happens that this
does not break any existing kernel include chains because it gets
included through other sources. However, when including the UAPI headers
in a userspace application (such as devlink in iproute2), _BITUL is not
defined.
Fixes: 5d5b4128c4 ("devlink: introduce flash update overwrite mask")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rohit Maheshwari says:
====================
cxgb4/ch_ktls: updates in net-next
This series of patches improves connections setup and statistics.
This series is broken down as follows:
Patch 1 fixes the handling of connection setup failure in HW. Driver
shouldn't return success to tls_dev_add, until HW returns success.
Patch 2 avoids the log flood.
Patch 3 adds ktls statistics at port level.
v1->v2:
- removed conn_up from all places.
v2->v3:
- Corrected timeout handling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All the ktls stats were at adapter level, but now changing it
to port level.
Fixes: 62370a4f34 ("cxgb4/chcr: Add ipv6 support and statistics")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changing these logs to dynamic debugs. If issue is seen, these
logs can be enabled at run time.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since driver first return success to tls_dev_add, if req to HW is
successful, but later if HW returns failure, that connection traffic
fails permanently and connection status remains unknown to stack.
v1->v2:
- removed conn_up from all places.
v2->v3:
- Corrected timeout handling.
Fixes: 34aba2c450 ("cxgb4/chcr : Register to tls add and del callback")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We marked /sys/fs/selinux/checkreqprot as deprecated in Linux v5.7,
but didn't provide any guidance as to the timeframe. Considering
the state of checkreqprot, it seems like one year should be enough
time.
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When building with
$ HOST_EXTRACFLAGS=-g make
the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.
Fixes: e3fd9b5384 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:
Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The local variable disk details is not used during the creating of thin & snap
devices. Remove them from dm-thin-metadata, and add pointer validity check for
pointer value in btree_lookup_raw. Skip memory copy when the caller doesn't need
the value.
Signed-off-by: Huaisheng Ye <yehs1@lenovo.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Block core warned that discard_granularity was 0 for dm-raid with
personality of raid1. Reason is that raid_io_hints() was incorrectly
special-casing raid1 rather than raid0.
But since commit 29efc390b9 ("md/md0: optimize raid0 discard
handling") even raid0 properly handles large discards.
Fix raid_io_hints() by removing discard limits settings for raid1.
Also, fix limits for raid10 by properly stacking underlying limits as
done in blk_stack_limits().
Depends-on: 29efc390b9 ("md/md0: optimize raid0 discard handling")
Fixes: 61697a6abd ("dm: eliminate 'split_discard_bios' flag from DM target interface")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY
set. These drivers allocate memory and thus they are unsuitable for block
I/O processing.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Move 'struct dm_table' definition from dm-table.c to dm-core.h and
update DM core to access its members directly.
Helps optimize max_io_len() and other methods slightly.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Only call bio_op() once in switch statement. Also remove the
excessive factoring out to one line functions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Saves redundant dm_target_offset() math.
Also, reverse argument order for max_io_len() to be consistent with
other similar functions.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using blk_max_size_offset() enables DM core's splitting to impose
ti->max_io_len (via q->limits.chunk_sectors) and also fallback to
respecting q->limits.max_sectors if chunk_sectors isn't set.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If target set ti->max_io_len it must be used when stacking
DM device's queue_limits to establish a 'chunk_sectors' that is
compatible with the IO stack.
By using lcm_not_zero() care is taken to avoid blindly overriding the
chunk_sectors limit stacked up by blk_stack_limits().
Depends-on: 07d098e6bb ("block: allow 'chunk_sectors' to be non-power-of-2")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Improve grammar in recently added sentences:
- Drop superfluous "be" in front of "have",
- Add missing articles.
Fixes: 73f76a41c4 ("dt-bindings: example: Extend based on practice")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200925111429.3146-1-geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add common properties appearing in DTSes (iommus, power-domains) to fix
dtbs_check warnings like:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: rotator@12810000:
'iommus', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200923150339.12497-1-krzk@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The LM81 and DS1780 are close relatives of the ADM9240 and already
supported by the same driver. Document them as trivial devices.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20200923051637.30464-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Rob Herring <robh@kernel.org>
DM depends on these block 5.10 commits:
22ada802ed block: use lcm_not_zero() when stacking chunk_sectors
07d098e6bb block: allow 'chunk_sectors' to be non-power-of-2
021a24460d block: add QUEUE_FLAG_NOWAIT
6abc49468e dm: add support for REQ_NOWAIT and enable it for linear target
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When an L2TPv3 session receives a data frame with an incorrect cookie
l2tp_core logs a warning message and bumps a stats counter to reflect
the fact that the packet has been dropped.
However, the stats counter in question is missing from the l2tp_netlink
get message for tunnel and session instances.
Include the statistic in the netlink get response.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
More incorrect VCAP offsets for mscc_ocelot switch
This small series fixes some wrong tc-flower action fields in the
Seville and Felix DSA drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the actions are packed together in the action RAM, an incorrect
action width means that no action except the first one would behave
correctly.
The tc-flower offload has probably not been tested on this hardware
since its introduction.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The port mask width was larger than the actual number of ports, and
therefore, all fields following this one were also shifted by the number
of excess bits. But the driver doesn't use the REW_OP, SMAC_REPLACE_ENA
or ACL_ID bits from the action vector, so the bug was inconsequential.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2020-09-29
Here's the main bluetooth-next pull request for 5.10:
- Multiple fixes to suspend/resume handling
- Added mgmt events for controller suspend/resume state
- Improved extended advertising support
- btintel: Enhanced support for next generation controllers
- Added Qualcomm Bluetooth SoC WCN6855 support
- Several other smaller fixes & improvements
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On my systems system() calls are marked with warn_unused_result
apparently. So without error checking we get this warning,
./prog_tests/snprintf_btf.c:30:9: warning: ignoring return value
of ‘system’, declared with attribute warn_unused_result[-Wunused-result]
Also it seems like a good idea to check the return value anyways
to ensure ping exists even if its seems unlikely.
Fixes: 076a95f5af ("selftests/bpf: Add bpf_snprintf_btf helper tests")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/160141006897.25201.12095049414156293265.stgit@john-Precision-5820-Tower
Since the switch to using regmap this function no longer takes the
I2C client struct as argument nor do we even interact with the client
anywhere other than when creating the regmap.
Rename it to a less misleading name: "rx8010_init()".
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
Huazhong Tan says:
====================
net: hns3: updates for -next
There are some misc updates for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adds debugfs to dump tqp enable status.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to query specifications of the device, add a new debugfs
command "dev spec" to do that.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETIF_F_HW_VLAN_CTAG_FILTER is not set in netdev->hw_feature,
but set in netdev->features.
So the handler of NETIF_F_HW_VLAN_CTAG_FILTER in hns3_self_test() is
always true, remove it.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add RoCE VF client reset support by notifying the RoCE VF client
when hns3 VF is resetting and adding a interface to query whether
CMDQ is ready to work.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
