When used on externs SEC() macro will trigger compilation warning about
inapplicable `__attribute__((used))`. That's expected for extern declarations,
so suppress it with the corresponding _Pragma.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-4-andrii@kernel.org
Dump succinct information for each member of DATASEC: its kinds and name. This
is extremely helpful to see at a quick glance what is inside each DATASEC of
a given BTF. Without this, one has to jump around BTF data to just find out
the name of a VAR or FUNC. DATASEC's var_secinfo member is special in that
regard because it doesn't itself contain the name of the member, delegating
that to the referenced VAR and FUNC kinds. Other kinds, like
STRUCT/UNION/FUNC/ENUM, encode member names directly and thus are clearly
identifiable in BTF dump.
The new output looks like this:
[35] DATASEC '.bss' size=0 vlen=6
type_id=8 offset=0 size=4 (VAR 'input_bss1')
type_id=13 offset=0 size=4 (VAR 'input_bss_weak')
type_id=16 offset=0 size=4 (VAR 'output_bss1')
type_id=17 offset=0 size=4 (VAR 'output_data1')
type_id=18 offset=0 size=4 (VAR 'output_rodata1')
type_id=20 offset=0 size=8 (VAR 'output_sink1')
[36] DATASEC '.data' size=0 vlen=2
type_id=9 offset=0 size=4 (VAR 'input_data1')
type_id=14 offset=0 size=4 (VAR 'input_data_weak')
[37] DATASEC '.kconfig' size=0 vlen=2
type_id=25 offset=0 size=4 (VAR 'LINUX_KERNEL_VERSION')
type_id=28 offset=0 size=1 (VAR 'CONFIG_BPF_SYSCALL')
[38] DATASEC '.ksyms' size=0 vlen=1
type_id=30 offset=0 size=1 (VAR 'bpf_link_fops')
[39] DATASEC '.rodata' size=0 vlen=2
type_id=12 offset=0 size=4 (VAR 'input_rodata1')
type_id=15 offset=0 size=4 (VAR 'input_rodata_weak')
[40] DATASEC 'license' size=0 vlen=1
type_id=24 offset=0 size=4 (VAR 'LICENSE')
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-3-andrii@kernel.org
Add dumping of "extern" linkage for BTF VAR kind. Also shorten
"global-allocated" to "global" to be in line with FUNC's "global".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-2-andrii@kernel.org
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-04-23
This series contains updates to i40e and iavf drivers.
Aleksandr adds support for VIRTCHNL_VF_CAP_ADV_LINK_SPEED in i40e which
allows for reporting link speed to VF as a value instead of using an
enum; helper functions are created to remove repeated code.
Coiby Xu reduces memory use of i40e when using kdump by reducing Tx, Rx,
and admin queue to minimum values. Current use causes failure of kdump.
Stefan Assmann removes duplicated free calls in iavf.
Haiyue cleans up a loop to return directly when if the value is found
and changes some magic numbers to defines for better maintainability
in iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With this change, the MPTCP-level retransmission timer is used to resend
DATA_FIN. The retranmit timer is not stopped while waiting for a
MPTCP-level ACK of DATA_FIN, and retransmitted DATA_FINs are sent on all
subflows. The retry interval starts at TCP_RTO_MIN and then doubles on
each attempt, up to TCP_RTO_MAX.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/146
Fixes: 43b54c6ee3 ("mptcp: Use full MPTCP-level disconnect state machine")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata says:
====================
selftests: mlxsw: Fixes
This patch set carries fixes to selftest issues that we have hit in our
nightly regression run. Almost all are in mlxsw selftests, though one is in
a generic forwarding selftest.
- In patch #1, in an ERSPAN test, install an FDB entry as static instead of
(implicitly) as local.
- In the mlxsw resource-scale test, an if statement overrides the value of
$?, which is supposed to contain the result of the test. As a result, the
resource scale test can spuriously pass.
In patches #2 and #3, remove the if statements to fix the issue in,
respectively, port_scale test and tc_flower_scale tests.
- Again in the mlxsw resource-scale test, when more then one sub-test is
run, a successful sub-test overrides any previous failures. This causes a
spurious pass of the overall test. This is fixed in patch #4.
- In patch #5, increase a tolerance in a mlxsw-specific RED backlog test.
This test is very noisy, due to rounding errors and the unpredictability
of software traffic generation. By bumping the tolerance from 5 % to 10,
get the failure rate to zero. This shouldn't impact the accuracy,
mistakes in backlog configuration (e.g. due to wrong cell size) are
likely to cause a much larger discrepancy.
- In patch #6, fix mausezahn invocation in the mlxsw ERSPAN scale
test. The test failed because of the wrong invocation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The mirror_gre_scale test creates as many ERSPAN sessions as the underlying
chip supports, and tests that they all work. In order to determine that it
issues a stream of ICMP packets and checks if they are mirrored as
expected.
However, the mausezahn invocation missed the -6 flag to identify the use of
IPv6 protocol, and was sending ICMP messages over IPv6, as opposed to
ICMP6. It also didn't pass an explicit source IP address, which apparently
worked at some point in the past, but does not anymore.
To fix these issues, extend the function mirror_test() in mirror_lib by
detecting the IPv6 protocol addresses, and using a different ICMP scheme.
Fix __mirror_gre_test() in the selftest itself to pass a source IP address.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The intention behind this test is to make sure that qdisc limit is
correctly projected to the HW. However, first, due to rounding in the
qdisc, and then in the driver, the number cannot actually be accurate. And
second, the approach to testing this is to oversubscribe the port with
traffic generated on the same switch. The actual backlog size therefore
fluctuates.
In practice, this test proved to be noisier than the rest, and spuriously
fails every now and then. Increase the tolerance to 10 % to avoid these
issues.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the resource scale test checks a few cases, when the error code
resets between the cases. So for example, if one case fails and the
consecutive case passes, the error code eventually will fit the last test
and will be 0.
Save a new return code that will hold the 'or' return codes of all the
cases, so the final return code will consider all the cases.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: abfce9e062 ("selftests: mlxsw: Reduce running time using offload indication")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the error return code of the failure condition is lost after
using an if statement, so the test doesn't fail when it should.
Remove the if statement that separates the condition and the error code
check, so the test won't always pass.
Fixes: 5154b1b826 ("selftests: mlxsw: Add a scale test for physical ports")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FDB roaming test installs a destination MAC address on the wrong
interface of an FDB database and tests whether the mirroring fails, because
packets are sent to the wrong port. The test by mistake installs the FDB
entry as local. This worked previously, because drivers were notified of
local FDB entries in the same way as of static entries. However that has
been fixed in the commit 6ab4c3117a ("net: bridge: don't notify switchdev
for local FDB addresses"), and local entries are not notified anymore. As a
result, the HW is not reconfigured for the FDB roam, and mirroring keeps
working, failing the test.
To fix the issue, mark the FDB entry as static.
Fixes: 9c7c8a8244 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kvm_memslots() will be called by kvm_write_guest_offset_cached() so we should
take the srcu lock. Let's pull the srcu lock operation from kvm_steal_time_set_preempted()
again to fix xen part.
Fixes: 30b5c851af ("KVM: x86/xen: Add support for vCPU runstate information")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1619166200-9215-1-git-send-email-wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Third, and final, set of patches for v5.13. We got one more week
before the merge window and this includes from that extra week.
Smaller features to rtw88 and mt76, but mostly this contains fixes.
rtw88
* 8822c: Add gap-k calibration to improve long range performance
mt76
* parse rate power limits from DT
* debugfs file to test firmware crash
* debugfs to disable NAPI threaded mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJggrbhAAoJEG4XJFUm622boIoH/RBPQ/qebSDf96s1D2Sqs64o
d/vp2Av8q8RiMo45v+jMQSZzRPEqqyCI6idFseYHojg+keq9wkHzLuNML3OSarD5
0TwdYVJGJ++ErhWmtnS0bQ7yWhO5qGnGSDVapQpaJ+HVREYEwCbLv+BihsY8sDli
1IaOnDglG/BxOpQBZFVB4kuLfoLcrW0LdbuY8r9s3iypb6p8WLK5zlBHnj0ebc6h
bI1dtwGXWrIkGyK+WDyAOmWuTaRV94j6RNLE8W2XKClSWlpvA1NSzttAG6BBKXLj
s2X0x43OcLGvv3kwaHY5gR3OmuJz4TBkPrEz4wXlI9d/htCDLVk84jCC0d/+JMg=
=6Fio
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2021-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.13
Third, and final, set of patches for v5.13. We got one more week
before the merge window and this includes from that extra week.
Smaller features to rtw88 and mt76, but mostly this contains fixes.
rtw88
* 8822c: Add gap-k calibration to improve long range performance
mt76
* parse rate power limits from DT
* debugfs file to test firmware crash
* debugfs to disable NAPI threaded mode
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
r8152: adjust REALTEK_USB_DEVICE
Modify REALTEK_USB_DEVICE macro.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Redefine REALTEK_USB_DEVICE macro with USB_DEVICE_INTERFACE_CLASS and
USB_DEVICE_AND_INTERFACE_INFO to simply the code.
Although checkpatch.pl shows the following error, it is more readable.
ERROR: Macros with complex values should be enclosed in parentheses
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTL8156 support CDC NCM mode. And users could set the configuration
of the USB device between vendor and NCM mode dynamically by themselves.
That is, the driver doesn't need to set vendor mode from NCM mode.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patch to support PTP Sync packet one-step timestamping
described one-step timestamping packet handling logic as below in
commit message:
- Trasmit packet immediately if no other one in transfer, or queue to
skb queue if there is already one in transfer.
The test_and_set_bit_lock() is used here to lock and check state.
- Start a work when complete transfer on hardware, to release the bit
lock and to send one skb in skb queue if has.
There was not problem of the description, but there was a mistake in
implementation. The locking/test_and_set_bit_lock() should be put in
enetc_start_xmit() which may be called by worker, rather than in
enetc_xmit(). Otherwise, the worker calling enetc_start_xmit() after
bit lock released is not able to lock again for transfer.
Fixes: 7294380c52 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-23
1) The SPI flow key in struct flowi has no consumers,
so remove it. From Florian Westphal.
2) Remove stray synchronize_rcu from xfrm_init.
From Florian Westphal.
3) Use the new exit_pre hook to reset the netlink socket
on net namespace destruction. From Florian Westphal.
4) Remove an unnecessary get_cpu() in ipcomp, that
code is always called with BHs off.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ilya Lipnitskiy says:
====================
mtk_eth_soc: fixes and performance improvements
Most of these changes come from OpenWrt where they have been present and
tested for months.
First three patches are bug fixes. The rest are performance
improvements. The last patch is a cleanup to use the iopoll.h macro for
busy-waiting instead of a custom loop.
v2:
- Reverse christmas tree in "use iopoll.h macro for DMA init"
- Use cond_resched() instead of iopoll.h macro in "reduce MDIO bus
access latency"
- Use napi_complete_done and rework NAPI callbacks in a new patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace a tight busy-wait loop without a pause with a standard
readx_poll_timeout_atomic routine with a 5 us poll period.
Tested by booting a MT7621 device to ensure the driver initializes
properly.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This improves GRO performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: Use MTK_RXD4_FOE_ENTRY instead of GENMASK(13, 0)]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use napi_complete_done to communicate total TX and RX work done to NAPI.
Count total RX work up instead of remaining work down for clarity.
Remove unneeded local variables for clarity. Use do {} while instead of
goto for clarity.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid rearming interrupt if napi_complete returns false
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uncached memory access is expensive, and there is no need to access all
descriptor words if we can't process them anyway
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value is only updated by the CPU, so it is cheaper to access from the
ring data structure than from a hardware register.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reduces the number of interrupts under load
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: add documentation for new struct fields]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
256 descriptors is not enough for multi-gigabit traffic under load on
MT7622. Bump it to 512 to improve performance.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Improves tx performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running short on descriptors, only stop the queue for the netdev that
tx was attempted for. By the time something tries to send on the other
netdev, the ring might have some more room already.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
usleep_range often ends up sleeping much longer than the 10-20us provided
as a range here. This causes significant latency in mdio bus acceses,
which easily adds multiple seconds to the boot time on MT7621 when polling
DSA slave ports.
Use cond_resched instead of usleep_range, since the MDIO access does not
take much time
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should improve performance, since it can use bulk free
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case build_skb fails, call skb_free_frag on the correct pointer. Also
update the DMA structures with the new mapping before exiting, because
the mapping was successful
Suggested-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since build_skb accesses the data area (for initializing shinfo), dma unmap
needs to happen before that call
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: split build_skb cleanup fix into a separate commit]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the header size check in geneve6_xmit_skb and geneve_xmit_skb
to use pskb_inet_may_pull rather than pskb_network_may_pull. This fixes
two kernel selftest failures introduced by the commit introducing the
checks:
IPv4 over geneve6: PMTU exceptions
IPv4 over geneve6: PMTU exceptions - nexthop objects
It does this by correctly accounting for the fact that IPv4 packets may
transit over geneve IPv6 tunnels (and vice versa), and still fixes the
uninit-value bug fixed by the original commit.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 6628ddfec7 ("net: geneve: check skb is large enough for IPv4/IPv6 header")
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
mana_gd_poll_cq() may return -1 if an overflow error is detected (this
should never happen unless there is a bug in the driver or the hardware).
Fix the type of the variable "comp_read" by using int rather than u32.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tw_prot_cleanup will check the twsk_prot.
Fixes: 0f5907af39 ("net: Fix potential memory leak in proto_register()")
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implementation of meters supposed to be a classic token bucket with 2
typical parameters: rate and burst size.
Burst size in this schema is the maximum number of bytes/packets that
could pass without being rate limited.
Recent changes to userspace datapath made meter implementation to be
in line with the kernel one, and this uncovered several issues.
The main problem is that maximum bucket size for unknown reason
accounts not only burst size, but also the numerical value of rate.
This creates a lot of confusion around behavior of meters.
For example, if rate is configured as 1000 pps and burst size set to 1,
this should mean that meter will tolerate bursts of 1 packet at most,
i.e. not a single packet above the rate should pass the meter.
However, current implementation calculates maximum bucket size as
(rate + burst size), so the effective bucket size will be 1001. This
means that first 1000 packets will not be rate limited and average
rate might be twice as high as the configured rate. This also makes
it practically impossible to configure meter that will have burst size
lower than the rate, which might be a desirable configuration if the
rate is high.
Inability to configure low values of a burst size and overall inability
for a user to predict what will be a maximum and average rate from the
configured parameters of a meter without looking at the OVS and kernel
code might be also classified as a security issue, because drop meters
are frequently used as a way of protection from DoS attacks.
This change removes rate from the calculation of a bucket size, making
it in line with the classic token bucket algorithm and essentially
making the rate and burst tolerance being predictable from a users'
perspective.
Same change proposed for the userspace implementation.
Fixes: 96fbc13d7e ("openvswitch: Add meter infrastructure")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These should be the final fixes for v5.12. There is one fix for SD card
detection on one Allwinner board, and a few fixes for the Tegra
platform that I had already queued up for v5.13 due to a communication
problem. This addresses MMC device ordering on multiple machines,
audio support on Jetson AGX Xavier and suspend/resume on Jetson TX2.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=kooC
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for v5.12.
There is one fix for SD card detection on one Allwinner board, and a
few fixes for the Tegra platform that I had already queued up for
v5.13 due to a communication problem. This addresses MMC device
ordering on multiple machines, audio support on Jetson AGX Xavier and
suspend/resume on Jetson TX2"
* tag 'arm-fixes-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
arm64: tegra: Move clocks from RT5658 endpoint to device node
arm64: tegra: Fix mmc0 alias for Jetson Xavier NX
arm64: tegra: Set fw_devlink=on for Jetson TX2
arm64: tegra: Add unit-address for ACONNECT on Tegra186
Although 'err' has been initialized to -ENOMEM, but it will be reassigned
by the "err = unwind__prepare_access(...)" statement in the for loop. So
that, the value of 'err' is unknown when map__clone() failed.
Fixes: 6c50258443 ("perf unwind: Call unwind__prepare_access for forked thread")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhen lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6).
The root cause is a missing pointer dereference which causes an
array element address to be used as PID.
Fix this by extracting the PID.
Output before:
# ./perf ftrace -v -- ls
function_graph tracer is used
write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument
failed to set ftrace pid
#
Output after:
./perf ftrace -v -- ls
function_graph tracer is used
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
4) | rcu_read_lock_sched_held() {
4) 0.552 us | rcu_lockdep_current_cpu_online();
4) 6.124 us | }
Reported-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the function auxtrace_parse_snapshot_options(), the callback pointer
"itr->parse_snapshot_options" can be NULL if it has not been set during
the AUX record initialization. This can cause tool crashing if the
callback pointer "itr->parse_snapshot_options" is dereferenced without
performing NULL check.
Add a NULL check for the pointer "itr->parse_snapshot_options" before
invoke the callback.
Fixes: d20031bb63 ("perf tools: Add AUX area tracing Snapshot Mode")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove interrupt masking and just let the hard irq handler keep
firing for new events. This is less of a performance impact vs
the MMIO readback inside the pci_msi_{mask,unmas}_irq(). Especially
with a loaded system those flushes can be stuck behind large amounts
of MMIO writes to flush. When guest kernel is running on top of VFIO
mdev, mask/unmask causes a vmexit each time and is not desirable.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/161894523436.3210025.1834640110556139277.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Create a dedicated lock for device command operations. Put the device
command operation under finer grained locking instead of using the
idxd->dev_lock.
Suggested-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161894525685.3210132.16160045731436382560.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
