- Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan)
- Fix use of BCM7216 reset controller (Jim Quinlan)
- Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert
(Jim Quinlan)
* pci/brcmstb:
PCI: brcmstb: Use reset/rearm instead of deassert/assert
ata: ahci_brcm: Fix use of BCM7216 reset controller
reset: add missing empty function reset_control_rearm()
- Convert tegra to MSI domains (Marc Zyngier)
- Use rcar controller address as MSI doorbell instead of allocating a page
(Marc Zyngier)
- Convert rcar to MSI domains (Marc Zyngier)
- Use xilinx port structure as MSI doorbell instead of allocating a page
(Marc Zyngier)
- Convert xilinx to MSI domains (Marc Zyngier)
- Remove unused Hyper-V msi_controller structure (Marc Zyngier)
- Remove unused PCI core msi_controller support (Marc Zyngier)
- Remove struct msi_controller (Marc Zyngier)
- Remove unused default_teardown_msi_irqs() (Marc Zyngier)
- Let host bridges declare their reliance on MSI domains (Marc Zyngier)
- Make pci_host_common_probe() declare its reliance on MSI domains (Marc
Zyngier)
- Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
- Document ways of ending up with NO_MSI (Marc Zyngier)
- Refactor HT advertising of NO_MSI flag (Marc Zyngier)
* remotes/lorenzo/pci/msi:
PCI: Refactor HT advertising of NO_MSI flag
PCI/MSI: Document the various ways of ending up with NO_MSI
PCI: mediatek: Advertise lack of built-in MSI handling
PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains
PCI/MSI: Let PCI host bridges declare their reliance on MSI domains
PCI/MSI: Kill default_teardown_msi_irqs()
PCI/MSI: Kill msi_controller structure
PCI/MSI: Drop use of msi_controller from core code
PCI: hv: Drop msi_controller structure
PCI: xilinx: Convert to MSI domains
PCI: xilinx: Don't allocate extra memory for the MSI capture address
PCI: rcar: Convert to MSI domains
PCI: rcar: Don't allocate extra memory for the MSI capture address
PCI: tegra: Convert to MSI domains
- Program IRTE with Requester ID of VMD endpoint, not child device (Jon
Derrick)
- Disable VMD MSI-X remapping when possible so children can use more MSI-X
vectors (Jon Derrick)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Disable MSI-X remapping when possible
iommu/vt-d: Use Real PCI DMA device for IRTE
- Make several microchip symbols static (Wei Yongjun)
- Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
Wilczyński)
* remotes/lorenzo/pci/microchip:
PCI: microchip: Remove dev_err() when handing an error from platform_get_irq()
PCI: microchip: Make some symbols static
- Configure FC and FTS for functions other than 0 (Ryder Lee)
- Add missing MODULE_DEVICE_TABLE (Qiheng Lin)
- Add YAML schema for MediaTek (Jianjun Wang)
- Export pci_pio_to_address() for module use (Jianjun Wang)
- Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
- Add MediaTek MT8192 INTx support (Jianjun Wang)
- Add MediaTek MT8192 MSI support (Jianjun Wang)
- Add MediaTek MT8192 system power management support (Jianjun Wang)
* remotes/lorenzo/pci/mediatek:
MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
PCI: mediatek-gen3: Add system PM support
PCI: mediatek-gen3: Add MSI support
PCI: mediatek-gen3: Add INTx support
PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192
PCI: Export pci_pio_to_address() for module use
dt-bindings: PCI: mediatek-gen3: Add YAML schema
PCI: mediatek: Add missing MODULE_DEVICE_TABLE
PCI: mediatek: Configure FC and FTS for functions other than 0
While running generic/050 with an external log, I observed this warning
in dmesg:
Trying to write to read-only block-device sda4 (partno 4)
WARNING: CPU: 2 PID: 215677 at block/blk-core.c:704 submit_bio_checks+0x256/0x510
Call Trace:
submit_bio_noacct+0x2c/0x430
_xfs_buf_ioapply+0x283/0x3c0 [xfs]
__xfs_buf_submit+0x6a/0x210 [xfs]
xfs_buf_delwri_submit_buffers+0xf8/0x270 [xfs]
xfsaild+0x2db/0xc50 [xfs]
kthread+0x14b/0x170
I think this happened because we tried to cover the log after a readonly
mount, and the AIL tried to write the primary superblock to the data
device. The test marks the data device readonly, but it doesn't do the
same to the external log device. Therefore, XFS thinks that the log is
writable, even though AIL writes whine to dmesg because the data device
is read only.
Fix this by amending xfs_log_writable to prevent writes when the AIL
can't possible write anything into the filesystem.
Note: As for the external log or the rt devices being readonly--
xfs_blkdev_get will complain about that if we aren't doing a norecovery
mount.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
- Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
- Use generic config accessors for TI AM65x (K3) to fix regression (Kishon
Vijay Abraham I)
- Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized
along with the RC in resume (Jisheng Zhang)
- Remove unused pcie_app_rd() (Jiapeng Chong)
- Move iATU detection earlier to fix regression (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Move iATU detection earlier
PCI: dwc/intel-gw: Remove unused function
PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc()
PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
- Add DT binding and TI j721e support for refclk to PCIe connector (Kishon
Vijay Abraham I)
- Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: j721e: Add support to provide refclk to PCIe connector
dt-bindings: PCI: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum
(Raphael Norwitz)
* pci/virtualization:
PCI: Delay after FLR of Intel DC P4510 NVMe
With CONFIG_PROC_FS=n and -Werror, 0-day reports:
drivers/video/fbdev/core/fbmem.c:736:36: error:
'proc_fb_seq_ops' defined but not used
Mark it as __maybe_unused.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504142910.2084722-1-linux@roeck-us.net
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE. Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
If the optional "clock-names" property is present, but the optional TXC
reference clock is not, "make dtbs_check" complains:
ethernet@e6800000: clock-names: ['fck'] is too short
Fix this by declaring that a single clock name is valid.
While at it, drop the superfluous upper limit on the number of clocks,
as it is implied by the list of descriptions.
Fixes: 6f43735b6d ("dt-bindings: net: renesas,etheravb: Add additional clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b3d91c9f70a15792ad19c87e4ea35fc876600fae.1620118901.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.
Co-developed-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit a7d2475af7 ("powerpc: Sort the selects under CONFIG_PPC")
sorted all selects under CONFIG_PPC.
4 years later, several items have been introduced at wrong place,
a few other have been renamed without moving them to their correct
place.
Reorder them now.
While we are at it, simplify the test for a couple of them:
- PPC_64 && PPC_PSERIES is simplified in PPC_PSERIES
- PPC_64 && PPC_BOOK3S is simplified in PPC_BOOK3S_64
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/361ee3fc5009c709ae0ca592249bb0702c6ef073.1619024780.git.christophe.leroy@csgroup.eu
The fstests test case generic/475 creates a dm-linear device that gets
changed to a dm-error device. This leads to errors in loading the block
group's zone information when running on a zoned file system, ultimately
resulting in a list corruption. When running on a kernel with list
debugging enabled this leads to the following crash.
BTRFS: error (device dm-2) in cleanup_transaction:1953: errno=-5 IO failure
kernel BUG at lib/list_debug.c:54!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 2433 Comm: umount Tainted: G W 5.12.0+ #1018
RIP: 0010:__list_del_entry_valid.cold+0x1d/0x47
RSP: 0018:ffffc90001473df0 EFLAGS: 00010296
RAX: 0000000000000054 RBX: ffff8881038fd000 RCX: ffffc90001473c90
RDX: 0000000100001a31 RSI: 0000000000000003 RDI: 0000000000000003
RBP: ffff888308871108 R08: 0000000000000003 R09: 0000000000000001
R10: 3961373532383838 R11: 6666666620736177 R12: ffff888308871000
R13: ffff8881038fd088 R14: ffff8881038fdc78 R15: dead000000000100
FS: 00007f353c9b1540(0000) GS:ffff888627d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f353cc2c710 CR3: 000000018e13c000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_free_block_groups+0xc9/0x310 [btrfs]
close_ctree+0x2ee/0x31a [btrfs]
? call_rcu+0x8f/0x270
? mutex_lock+0x1c/0x40
generic_shutdown_super+0x67/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x90
cleanup_mnt+0x13e/0x1b0
task_work_run+0x63/0xb0
exit_to_user_mode_loop+0xd9/0xe0
exit_to_user_mode_prepare+0x3e/0x60
syscall_exit_to_user_mode+0x1d/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
As dm-error has no support for zones, btrfs will run it's zone emulation
mode on this device. The zone emulation mode emulates conventional zones,
so bail out if the zone bitmap that gets populated on mount sees the zone
as sequential while we're thinking it's a conventional zone when creating
a block group.
Note: this scenario is unlikely in a real wold application and can only
happen by this (ab)use of device-mapper targets.
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.
Create a seed device and add a sprout device to it:
$ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
$ btrfstune -S 1 /dev/loop0
$ mount /dev/loop0 /btrfs
$ btrfs dev add -f /dev/loop1 /btrfs
BTRFS info (device loop0): relocating block group 290455552 flags system
BTRFS info (device loop0): relocating block group 1048576 flags system
BTRFS info (device loop0): disk added /dev/loop1
$ umount /btrfs
Mount the sprout device and run fstrim:
$ mount /dev/loop1 /btrfs
$ fstrim /btrfs
$ umount /btrfs
Now try to mount the seed device, and it fails:
$ mount /dev/loop0 /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
Block 5292032 is missing on the readonly seed device:
$ dmesg -kt | tail
<snip>
BTRFS error (device loop0): bad tree block start, want 5292032 have 0
BTRFS warning (device loop0): couldn't read-tree root
BTRFS error (device loop0): open_ctree failed
From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:
$ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
<snip>
item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
block group used 114688 chunk_objectid 256 flags METADATA
<snip>
From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:
$ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
<snip>
item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
block group used 32768 chunk_objectid 256 flags METADATA
<snip>
BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:
kprobe:btrfs_discard_extent {
printf("freeing start %llu end %llu num_bytes %llu:\n",
arg1, arg1+arg2, arg2);
}
freeing start 5259264 end 5406720 num_bytes 147456
<snip>
Fix this by avoiding the discard command to the readonly seed device.
Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7c95d8893f ("powerpc: Change calling convention for
create_branch() et. al.") complexified the frame of function
do_feature_fixups(), leading to GCC setting up a stack
guard when CONFIG_STACKPROTECTOR is selected.
The problem is that do_feature_fixups() is called very early
while 'current' in r2 is not set up yet and the code is still
not at the final address used at link time.
So, like other instrumentation, stack protection needs to be
deactivated for feature-fixups.c and code-patching.c
Fixes: 7c95d8893f ("powerpc: Change calling convention for create_branch() et. al.")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Jonathan Neuschaefer <j.neuschaefer@gmx.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Jonathan Neuschaefer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b688fe82927b330349d9e44553363fa451ea4d95.1619715114.git.christophe.leroy@csgroup.eu
Trace memory is cleared and the corresponding dcache lines
are flushed after allocation. However, this should not be
done using the PFN. This adds the missing conversion to
virtual address.
Fixes: 2ac02e5ece ("powerpc/mm: Remove dcache flush from memory remove.")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210501160254.1179831-1-sandipan@linux.ibm.com
kexec_file_load() uses initial_boot_params in setting up the device tree
for the kernel to be loaded. Though initial_boot_params holds info about
CPUs at the time of boot, it doesn't account for hot added CPUs.
So, kexec'ing with kexec_file_load() syscall leaves the kexec'ed kernel
with inaccurate CPU info.
If kdump kernel is loaded with kexec_file_load() syscall and the system
crashes on a hot added CPU, the capture kernel hangs failing to identify
the boot CPU, with no output.
To avoid this from happening, extract current CPU info from of_root
device node and use it for setting up the fdt in kexec_file_load case.
Fixes: 6ecd0163d3 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429060256.199714-1-sourabhjain@linux.ibm.com
We use reset-simple in this patch so that pcie driver can use
devm_reset_control_get() to get this reset data structure and use
reset_control_deassert() to deassert pcie_power_up_rst_n.
Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
We add pcie_aux clock in this patch so that pcie driver can use
clk_prepare_enable() and clk_disable_unprepare() to enable and disable
pcie_aux clock.
Link: https://lore.kernel.org/r/20210504105940.100004-2-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04. However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.
This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism. Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off. This should be good enough for the
purpose, and was actually confirmed to work fine.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.
This patch provides a fixup for the fixed DAC/pin mapping for this
device.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When switching virtio_pci_modern to use a helper for mappings we lost an
__iomem tag. Restore it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9e3bb9b79a ("virtio_pci_modern: introduce helper to map vq notify area")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching virtio_pci_modern to use a helper for mappings we lost an
__iomem tag. We should restore it.
However, virtio_pci_modern is playing tricks by hiding an iomem pointer
in a regular vq->priv pointer. Which is okay as long as it's
all contained within a single file, but we need to __force cast
the value otherwise we'll get sparse warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7dca6c0ea9 ("virtio-pci library: switch to use vp_modern_map_vq_notify()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nothing can stop a host from submitting invalid commands. The target
just needs to respond with an appropriate status, but that's not a
target error. Demote invalid command messages to the debug level so
these events don't spam the kernel logs.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a request finally completes in end_io() after it has failed over,
the bdev pointer can be stale and thus the system can crash. Set the
bdev back to ns head, so the request is map to an active path when
resubmitted.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
