If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).
Fixes: e0b7d420f7 ("pNFS: Don't discard layout segments that are marked for return")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the NFS super block is being unmounted, then we currently may end up
telling the server that we've forgotten the layout while it is actually
still in use by the client.
In that case, just assume that the client will soon return the layout
anyway, and so return NFS4ERR_DELAY in response to the layout recall.
Fixes: 58ac3e5923 ("NFSv4/pnfs: Clean up nfs_layout_find_inode()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The spi controller supports 44-bit address space on AXI in DMA mode,
so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping.
In addition, if dma_map_single fails, it should return immediately
instead of continuing doing the DMA operation which bases on invalid
address.
This fixes the following crash which occurs in reading a big block
from flash:
[ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots)
[ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped
[ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0
[ 123.792536] Mem abort info:
[ 123.795313] ESR = 0x96000145
[ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits
[ 123.803655] SET = 0, FnV = 0
[ 123.806693] EA = 0, S1PTW = 0
[ 123.809818] Data abort info:
[ 123.812683] ISV = 0, ISS = 0x00000145
[ 123.816503] CM = 1, WnR = 1
[ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000
[ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000
[ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP
Fixes: 1c26372e5a ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-6-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When handling op->addr, it is using the buffer "tmpbuf" which has been
freed. This will trigger a use-after-free KASAN warning. Let's use
temporary variables to store op->addr.val and op->cmd.opcode to fix
this issue.
Fixes: 1c26372e5a ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-5-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During a transfer the driver filled the fifo with 4bytes,
even if the data that needs to be transfer is less that 4bytes.
This resulted in slab-out-of-bounds bug in KernelAddressSanitizer.
This patch resolves slab-out-of-bounds bug by filling the fifo
with the number of bytes that needs to transferred.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-4-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After calling platform_set_drvdata(pdev, xqspi) in probe, the return
value of dev_get_drvdata(dev) is a pointer to struct zynqmp_qspi but
not struct spi_controller. A wrong structure type passing to the
functions spi_controller_suspend/resume will hang the system.
And we should check the return value of spi_controller_suspend, if
an error is returned, return it to PM subsystem to stop suspend.
Also, GQSPI_EN_MASK should be written to GQSPI_EN_OFST to enable
the spi controller in zynqmp_qspi_resume since it was disabled in
zynqmp_qspi_suspend before.
Fixes: 1c26372e5a ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-3-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clks "pclk" and "ref_clk" are enabled twice during the probe. The
first time is in the function zynqmp_qspi_probe and the second time is
in zynqmp_qspi_setup_op which is called by devm_spi_register_controller.
Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks
will trigger a warning as below:
[ 309.124604] Unpreparing enabled qspi_ref
[ 309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110
Since pm_runtime works now, clks can be enabled/disabled by calling
zynqmp_runtime_suspend/resume. So we don't need to enable these clks
explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue.
And remove clk enabling/disabling in zynqmp_qspi_resume because there is
no spi transfer operation so enabling ref_clk is redundant meanwhile pclk
is not disabled for it is shared with other peripherals.
Furthermore replace clk_enable/disable with clk_prepare_enable and
clk_disable_unprepare in runtime_suspend/resume functions.
Fixes: 1c26372e5a ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210416004652.2975446-2-quanyang.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A DAI link has 3 components:
* CPU
* platform
* codec(s)
A component is specified via:
* name
* of_node
* dai_name
In order to avoid confusion when building a sound card we disallow
matching by both name and of_node (1).
soc_check_tplg_fes allows overriding certain BE links by overriding
BE link name. This doesn't work well if BE link was specified via DT,
because we end up with a link with both name and of_node specified
which is conflicting with (1).
In order to fix this we need to:
* override of_node if component was specified via DT
* override name, otherwise.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20210414101212.65573-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for jack detection, rt711 DAI and DMIC
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add one configuration with no RT711.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add configurations ported over from TGL.
The topology names need to include link information given all the
hardware permutations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210415175013.192862-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 01e99aeca3 'blk-mq: insert passthrough request into
hctx->dispatch directly', passthrough request should not appear in
IO-scheduler any more, so blk_rq_is_passthrough checking in addon IO
schedulers is redundant.
(Notes: this patch passes generic IO load test with hdds under SAS
controller and hdds under AHCI controller but obviously not covers all.
Not sure if passthrough request can still escape into IO scheduler from
blk_mq_sched_insert_requests, which is used by blk_mq_flush_plug_list and
has lots of indirect callers.)
Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 01e99aeca3 ("blk-mq: insert passthrough request into
hctx->dispatch directly") gives high priority to passthrough requests and
bypass underlying IO scheduler. But as we allocate tag for such request it
still runs io-scheduler's callback limit_depth, while we really want is to
give full sbitmap-depth capabity to such request for acquiring available
tag.
blktrace shows PC requests(dmraid -s -c -i) hit bfq's limit_depth:
8,0 2 0 0.000000000 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 1 0.000008134 39952 D R 4 [dmraid]
8,0 2 2 0.000021538 24 C R [0]
8,0 2 0 0.000035442 39952 1,0 m N bfq [bfq_limit_depth] wr_busy 0 sync 0 depth 8
8,0 2 3 0.000038813 39952 D R 24 [dmraid]
8,0 2 4 0.000044356 24 C R [0]
This patch introduce a new wrapper to make code not that ugly.
Signed-off-by: Lin Feng <linf@wangsu.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210415033920.213963-1-linf@wangsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it.
This also removes a reference to http://www.xyratex.com which seems to be
down.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not
necessary to do it here, so remove it.
It should return error immediately when return value of 'hpre_cfg_by_dsm'
is non-zero, and no need to execute the remaining sentences.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the received sqe is abnormal, the error message in the sqe written
back by the hardware is printed to help to analyze the abnormal causes.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The return value of 'le32_to_cpu' is unsigned, so change the
variable type from 'int' to 'unsigned int'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are two spaces after return, just keep one.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Debian's clang carries a patch that makes the default FPU mode
'vfp3-d16' instead of 'neon' for 'armv7-a' to avoid generating NEON
instructions on hardware that does not support them:
https://salsa.debian.org/pkg-llvm-team/llvm-toolchain/-/raw/5a61ca6f21b4ad8c6ac4970e5ea5a7b5b4486d22/debian/patches/clang-arm-default-vfp3-on-armv7a.patchhttps://bugs.debian.org/841474https://bugs.debian.org/842142https://bugs.debian.org/914268
This results in the following build error when clang's integrated
assembler is used because the '.arch' directive overrides the '.fpu'
directive:
arch/arm/crypto/curve25519-core.S:25:2: error: instruction requires: NEON
vmov.i32 q0, #1
^
arch/arm/crypto/curve25519-core.S:26:2: error: instruction requires: NEON
vshr.u64 q1, q0, #7
^
arch/arm/crypto/curve25519-core.S:27:2: error: instruction requires: NEON
vshr.u64 q0, q0, #8
^
arch/arm/crypto/curve25519-core.S:28:2: error: instruction requires: NEON
vmov.i32 d4, #19
^
Shuffle the order of the '.arch' and '.fpu' directives so that the code
builds regardless of the default FPU mode. This has been tested against
both clang with and without Debian's patch and GCC.
Cc: stable@vger.kernel.org
Fixes: d8f1308a02 ("crypto: arm/curve25519 - wire up NEON implementation")
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/118
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Jessica Clarke <jrtc27@jrtc27.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the detection of hangs by setting watchdog timers (WDTs) on
generations that supports that feature.
The default timeout value comes from HW specs. WTDs are reset each time
an accelerator wins arbitration and is able to send/read a command to/from
an accelerator.
The value has added significant margin to make sure there are no spurious
timeouts. The scope of watchdog is per QAT device.
If a timeout is detected, the firmware resets the accelerator and
returns a response descriptor with an appropriate error code.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The buffer of the hardware sge needs to be initialized by
soft sgl.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This seems "32" and "31" is obfuscating, It might be better to add a comment,
which explain it.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to Documentation/core-api/printk-formats.rst, Use
the correct print format. Printing an unsigned int value should use %u
instead of %d.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to Documentation/core-api/printk-formats.rst, Use
the correct print format. Printing an unsigned int value should use %u
instead of %d.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove including <linux/version.h> that don't need it.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
devm_platform_ioremap_resource() and devm_ioremap_resource()
will print err msg while failing, so the redundant dev_err call
can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports trng and prng, but Kunpeng920 only supports trng.
Therefore, version information is added to ensure that prng is not
registered to Crypto subsystem on Kunpeng920.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The new carry handling code in the CTR driver can deal with a carry
occurring in the 4x/5x parallel code path, by using a computed goto to
jump into the carry sequence at the right place as to only apply the
carry to a subset of the blocks being processed.
If the lower half of the counter wraps and ends up at exactly 0x0, a
carry needs to be applied to the counter, but not to the counter values
taken for the 4x/5x parallel sequence. In this case, the computed goto
skips all register assignments, and branches straight to the jump
instruction that gets us back to the fast path. This produces the
correct result, but due to the fact that this branch target does not
carry the correct BTI annotation, this fails when BTI is enabled.
Let's omit the computed goto entirely in this case, and jump straight
back to the fast path after applying the carry to the main counter.
Fixes: 5318d3db46 ("crypto: arm64/aes-ctr - improve tail handling")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 could be able to stop queue by writing hardware registers,
which will trigger tasks in device to be flushed out.
In order to be compatible with the kunpeng920 driver, add 'qm_hw_ops_v3' to
adapt Kunpeng930. And 'stop_qp' callback is added in 'qm_hw_ops_v3' to
write hardware registers. Call 'stop_qp' to drain the tasks in device
before releasing queue.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This function declaration has been added in 'ecc_curve.h',
delete it in 'crypto/ecc.h'.
Fixes: 4e6602916bc6(crypto: ecdsa - Add support for ECDSA ...)
Signed-off-by: Meng Yu <yumeng18@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When I changed the rc variable to be long rather than int64_t I
neglected to update the printk(), leading to a build break:
arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush':
arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format
'%lld' expects argument of type 'long long int', but argument 3 has
type 'long int' [-Wformat=]
Fixes: 75b7c05ebf ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-2-mpe@ellerman.id.au
It has been years since I've touched this and "this" is going away
anyway... any day now. :-)
So remove me so that I do not get CCed on bugs/patches.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210412090346.31213-1-bp@alien8.de
