Re-execution of an instruction after emulation decode failure is
intended to be used only when emulating shadow page accesses. Invert
the flag to make allowing re-execution opt-in since that behavior is
by far in the minority.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Re-execution after an emulation decode failure is only intended to
handle a case where two or vCPUs race to write a shadowed page, i.e.
we should never re-execute an instruction as part of RSM emulation.
Add a new helper, kvm_emulate_instruction_from_buffer(), to support
emulating from a pre-defined buffer. This eliminates the last direct
call to x86_emulate_instruction() outside of kvm_mmu_page_fault(),
which means x86_emulate_instruction() can be unexported in a future
patch.
Fixes: 7607b71744 ("KVM: SVM: install RSM intercept")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Re-execution after an emulation decode failure is only intended to
handle a case where two or vCPUs race to write a shadowed page, i.e.
we should never re-execute an instruction as part of MMIO emulation.
As handle_ept_misconfig() is only used for MMIO emulation, it should
pass EMULTYPE_NO_REEXECUTE when using the emulator to skip an instr
in the fast-MMIO case where VM_EXIT_INSTRUCTION_LEN is invalid.
And because the cr2 value passed to x86_emulate_instruction() is only
destined for use when retrying or reexecuting, we can simply call
emulate_instruction().
Fixes: d391f12070 ("x86/kvm/vmx: do not use vm-exit instruction length
for fast MMIO when running nested")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Variable dst_vaddr_end is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
variable 'dst_vaddr_end' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
nested_run_pending is set 20 lines above and check_vmentry_prereqs()/
check_vmentry_postreqs() don't seem to be resetting it (the later, however,
checks it).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This reverts commit a7f91061c6.
Felix pointed out that we need to have the BOs mapped even before
amdgpu_vm_update_directories is called.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Always try to put the GART away from where VRAM is.
v2: correctly handle the 4GB limitation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On AMD/ATI controllers, the HD-audio controller driver allows a bus
reset upon the error recovery, and its procedure includes the
cancellation of pending jack polling work as found in
snd_hda_bus_codec_reset(). This works usually fine, but it becomes a
problem when the reset happens from the jack poll work itself; then
calling cancel_work_sync() from the work being processed tries to wait
the finish endlessly.
As a workaround, this patch adds the check of current_work() and
applies the cancel_work_sync() only when it's not from the
jackpoll_work.
This doesn't fix the root cause of the reported error below, but at
least, it eases the unexpected stall of the whole system.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937
Cc: <stable@vger.kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The QED driver commit, 1ac4329a1c ("qed: Add configuration information
to register dump and debug data"), removes the CRC length validation
causing nvm_get_image failure while loading qedi driver:
[qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes
where only 00006004 are available
[qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12
Hence add and adjust the CRC size to iSCSI NVM image to read boot info at
qedi load time.
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If iscsi_login_init_conn fails it can free conn_ops.
__iscsi_target_login_thread will then call iscsi_target_login_sess_out
which will also free it.
This fixes the problem by organizing conn allocation/setup into parts that
are needed through the life of the conn and parts that are only needed for
the login. The free functions then release what was allocated in the alloc
functions.
With this patch we have:
iscsit_alloc_conn/iscsit_free_conn - allocs/frees the conn we need for the
entire life of the conn.
iscsi_login_init_conn/iscsi_target_nego_release - allocs/frees the parts
of the conn that are only needed during login.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fixes a use-after-free reported by KASAN when later
iscsi_target_login_sess_out gets called and it tries to access
conn->sess->se_sess:
Disabling lock debugging due to kernel taint
iSCSI Login timeout on Network Portal [::]:3260
iSCSI Login negotiation failed.
==================================================================
BUG: KASAN: use-after-free in
iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980
CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O
4.17.8kasan.sess.connops+ #4
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB,
BIOS 5.6.5 05/19/2014
Call Trace:
dump_stack+0x71/0xac
print_address_description+0x65/0x22e
? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
kasan_report.cold.6+0x241/0x2fd
iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod]
iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod]
? __sched_text_start+0x8/0x8
? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
? __kthread_parkme+0xcc/0x100
? parse_args.cold.14+0xd3/0xd3
? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod]
kthread+0x1a0/0x1c0
? kthread_bind+0x30/0x30
ret_from_fork+0x35/0x40
Allocated by task 980:
kasan_kmalloc+0xbf/0xe0
kmem_cache_alloc_trace+0x112/0x210
iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod]
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
Freed by task 980:
__kasan_slab_free+0x125/0x170
kfree+0x90/0x1d0
iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod]
kthread+0x1a0/0x1c0
ret_from_fork+0x35/0x40
The buggy address belongs to the object at ffff880109d06f00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 456 bytes inside of
512-byte region [ffff880109d06f00, ffff880109d07100)
The buggy address belongs to the page:
page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000
index:0x0 compound_mapcount: 0
flags: 0x17fffc000008100(slab|head)
raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c
raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
[rebased against idr/ida changes and to handle ret review comments from Matthew]
Signed-off-by: Mike Christie <mchristi@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
text_poke() and text_poke_bp() must be called with text_mutex held.
Put proper lockdep anotation in place instead of just mentioning the
requirement in a comment.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/nycvar.YFH.7.76.1808280853520.25787@cbobk.fhfr.pm
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
bumped the minimum GCC version to 4.6 for all architectures.
This effectively reverts commit da541b2002 ("objtool: Skip unreachable
warnings for GCC 4.4 and older"), which was a workaround for GCC 4.4 or
older.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/1535341183-19994-1-git-send-email-yamada.masahiro@socionext.com
Some architectures need to use stop_machine() to patch functions for
ftrace, and the assumption is that the stopped CPUs do not make function
calls to traceable functions when they are in the stopped state.
Commit ce4f06dcbb ("stop_machine: Touch_nmi_watchdog() after
MULTI_STOP_PREPARE") added calls to the watchdog touch functions from
the stopped CPUs and those functions lack notrace annotations. This
leads to crashes when enabling/disabling ftrace on ARM kernels built
with the Thumb-2 instruction set.
Fix it by adding the necessary notrace annotations.
Fixes: ce4f06dcbb ("stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: oleg@redhat.com
Cc: tj@kernel.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180821152507.18313-1-vincent.whitchurch@axis.com
Reset the KASAN shadow state of the task stack before rewinding RSP.
Without this, a kernel oops will leave parts of the stack poisoned, and
code running under do_exit() can trip over such poisoned regions and cause
nonsensical false-positive KASAN reports about stack-out-of-bounds bugs.
This does not wipe the exception stacks; if an oops happens on an exception
stack, it might result in random KASAN false-positives from other tasks
afterwards. This is probably relatively uninteresting, since if the kernel
oopses on an exception stack, there are most likely bigger things to worry
about. It'd be more interesting if vmapped stacks and KASAN were
compatible, since then handle_stack_overflow() would oops from exception
stack context.
Fixes: 2deb4be280 ("x86/dumpstack: When OOPSing, rewind the stack before do_exit()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kasan-dev@googlegroups.com
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180828184033.93712-1-jannh@google.com
This should have been marked extern inline in order to pick up the out
of line definition in arch/x86/kernel/irqflags.S.
Fixes: 208cbb3255 ("x86/irqflags: Provide a declaration for native_save_fl")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180827214011.55428-1-ndesaulniers@google.com
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
bumped the minimum GCC version to 4.6 for all architectures.
Remove the workaround code.
It was the only user of cc-if-fullversion. Remove the macro as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/1535348714-25457-1-git-send-email-yamada.masahiro@socionext.com
In the error path of changing the SKB headroom of the second
A-MSDU subframe, we would not account for the already-changed
length of the first frame that just got converted to be in
A-MSDU format and thus is a bit longer now.
Fix this by doing the necessary accounting.
It would be possible to reorder the operations, but that would
make the code more complex (to calculate the necessary pad),
and the headroom expansion should not fail frequently enough
to make that worthwhile.
Fixes: 6e0456b545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do not start to aggregate packets in a A-MSDU frame (converting the
first subframe to A-MSDU, adding the header) if max_tx_fragments or
max_amsdu_subframes limits are already exceeded by it. In particular,
this happens when drivers set the limit to 1 to avoid A-MSDUs at all.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
[reword commit message to be more precise]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_update_ft_ies() tried to validate NL80211_ATTR_IE with
is_valid_ie_attr() before dereferencing it, but that helper function
returns true in case of NULL pointer (i.e., attribute not included).
This can result to dereferencing a NULL pointer. Fix that by explicitly
checking that NL80211_ATTR_IE is included.
Fixes: 355199e02b ("cfg80211: Extend support for IEEE 802.11r Fast BSS Transition")
Signed-off-by: Arunk Khandavalli <akhandav@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This doesn't affect runtime because in the current code "idx" is always
valid.
First, we read from "vgdev->capsets[idx].max_size" before checking
whether "idx" is within bounds. And secondly the bounds check is off by
one so we could end up reading one element beyond the end of the
vgdev->capsets[] array.
Fixes: 62fb7a5e10 ("virtio-gpu: add 3d/virgl support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180704094250.m7sgvvzg3dhcvv3h@kili.mountain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062127.10131-3-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062127.10131-2-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731063559.11629-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731063128.11041-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.
A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.
The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180731062851.10812-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Paolo Abeni says:
====================
net_sched: reject unknown tcfa_action values
As agreed some time ago, this changeset reject unknown tcfa_action values,
instead of changing such values under the hood.
A tdc test is included to verify the new behavior.
v1 -> v2:
- helper is now static and renamed according to act_* convention
- updated extack message, according to the new behavior
====================
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the police action allows us to specify an arbitrary numeric value
for the control action. This change introduces an explicit test case
for the above feature and then leverage it for testing the kernel behavior
for invalid control actions (reject).
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the commit 802bfb1915 ("net/sched: user-space can't set
unknown tcfa_action values"), unknown tcfa_action values are
converted to TC_ACT_UNSPEC, but the common agreement is instead
rejecting such configurations.
This change also introduces a helper to simplify the destruction
of a single action, avoiding code duplication.
v1 -> v2:
- helper is now static and renamed according to act_* convention
- updated extack message, according to the new behavior
Fixes: 802bfb1915 ("net/sched: user-space can't set unknown tcfa_action values")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without a valid of_node in struct device we can't find the mvpp2 port
device by its DT node. Specifically, this breaks
of_find_net_device_by_node().
For example, the Armada 8040 based Clearfog GT-8K uses Marvell 88E6141
switch connected to the &cp1_eth2 port:
&cp1_mdio {
...
switch0: switch0@4 {
compatible = "marvell,mv88e6085";
...
ports {
...
port@5 {
reg = <5>;
label = "cpu";
ethernet = <&cp1_eth2>;
};
};
};
};
Without this patch, dsa_register_switch() returns -EPROBE_DEFER because
of_find_net_device_by_node() can't find the device_node of the &cp1_eth2
device.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Physical plane's tiling mode value is given directly as
drm_format_mod for plane query, which is not correct fourcc
code. Fix it by using correct intel tiling fourcc mod definition.
Current qemu seems also doesn't correctly utilize drm_format_mod
for plane object setting. Anyway this is required to fix the usage.
v3: use DRM_FORMAT_MOD_LINEAR, fix comment
v2: Fix missed old 'tiled' use for stride calculation
Fixes: e546e281d3 ("drm/i915/gvt: Dmabuf support for GVT-g")
Cc: Tina Zhang <tina.zhang@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Colin Xu <Colin.Xu@intel.com>
Reviewed-by: Colin Xu <Colin.Xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
pm_runtime_get_sync in intel_runtime_pm_get might sleep if i915
device is not active. When stop vgpu schedule, the device may be
inactive. So need to move runtime_pm_get out of spin_lock/unlock.
Fixes: b24881e0b0b6("drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
Cc: <stable@vger.kernel.org>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Recent patch introduce strict check on scanning cmd:
Commit 8d458ea0ec ("drm/i915/gvt: return error on cmd access")
Before 8d458ea0ec, if cmd_reg_handler() checks that a cmd access a mmio
that not marked as F_CMD_ACCESS, it simply returns 0 and log an error.
Now it will return -EBADRQC which will cause the workload fail to submit.
On BXT, i915 applies WaClearHIZ_WM_CHICKEN3 which will program
GEN9_WM_CHICKEN3 by LRI when init wa ctx. If it has no F_CMD_ACCESS flag,
vgpu will fail to start. Also add F_MODE_MASK since it's mode mask reg.
v2: Refresh commit message to elaborate issue symptom in detail.
v3: Make SKL_PLUS share same handling since GEN9_WM_CHICKEN3 should be
F_CMD_ACCESS from HW aspect. (yan, zhenyu)
Signed-off-by: Colin Xu <colin.xu@intel.com>
Acked-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Guest kernel will write to BXT_PHY_CTL_FAMILY to reset DDI PHY
and pull BXT_PHY_CTL to check PHY status. Previous handling will
set/reset BXT_PHY_CTL of all PHYs at same time on receiving vreg
write to some BXT_PHY_CTL_FAMILY. If some BXT_PHY_CTL is already
enabled, following reset to another BXT_PHY_CTL_FAMILY will clear
the enabled BXT_PHY_CTL, which result in guest kernel print:
-----------------------------------
[drm:intel_ddi_get_hw_state [i915]]
*ERROR* Port B enabled but PHY powered down? (PHY_CTL 00000000)
-----------------------------------
The correct handling should operate BXT_PHY_CTL_FAMILY and
BXT_PHY_CTL on the same DDI.
v2: Use correct reg define. The naming looks confusing, however
current i915_reg.h bind DPIO_PHY0 to _PHY_CTL_FAMILY_DDI and
bind DPIO_PHY1 to _PHY_CTL_FAMILY_EDP, pairing to
_BXT_PHY_CTL_DDI_A and _BXT_PHY_CTL_DDI_B respectively.
v3: v2 incorrectly map _PHY_CTL_FAMILY_EDP to _BXT_PHY_CTL_DDI_A.
BXT_PHY_CTL() looks up DDI using PORTx but not PHYx. Based on
DPIO_PHY to DDI mapping, make correct vreg handle to BXT_PHY_CTL
on receiving vreg write to BXT_PHY_CTL_FAMILY. (He, Min)
Current mapping according to bxt_power_wells:
dpio-common-a:
>>> DPIO_PHY1
>>> BXT_DPIO_CMN_A_POWER_DOMAINS
>>> POWER_DOMAIN_PORT_DDI_A_LANES
>>> PORT_A
dpio-common-bc:
>>> DPIO_PHY0
>>> BXT_DPIO_CMN_BC_POWER_DOMAINS
>>> POWER_DOMAIN_PORT_DDI_B_LANES | POWER_DOMAIN_PORT_DDI_C_LANES
>>> PORT_B or PORT_C
Signed-off-by: Colin Xu <colin.xu@intel.com>
Reviewed-by: He, Min <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When using the fixed PHY with GENET (e.g. MOCA) the PHY link
status can be determined from the internal link status captured
by the MAC. This allows the PHY state machine to use the correct
link state with the fixed PHY even if MAC link event interrupts
are missed when the net device is opened.
Fixes: 8d88c6ebb3 ("net: bcmgenet: enable MoCA link state change detection")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet
controller that is on other SoCFPGA platforms. Build the platform driver.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca says:
====================
ipv6: fix error path of inet6_init()
The error path of inet6_init() can trigger multiple kernel panics,
mostly due to wrong ordering of cleanups. This series fixes those
issues.
====================
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtnl_unregister_all(PF_INET6) gets called from inet6_init in cases when
no handler has been registered for PF_INET6 yet, for example if
ip6_mr_init() fails. Abort and avoid a NULL pointer deref in that case.
Example of panic (triggered by faking a failure of
register_pernet_subsys):
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
[...]
RIP: 0010:rtnl_unregister_all+0x17e/0x2a0
[...]
Call Trace:
? rtnetlink_net_init+0x250/0x250
? sock_unregister+0x103/0x160
? kernel_getsockopt+0x200/0x200
inet6_init+0x197/0x20d
Fixes: e2fddf5e96 ("[IPV6]: Make af_inet6 to check ip6_route_init return value.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
contains an error in the cleanup path of inet6_init(): when
proto_register(&pingv6_prot, 1) fails, we try to unregister
&pingv6_prot. When rawv6_init() fails, we skip unregistering
&pingv6_prot.
Example of panic (triggered by faking a failure of
proto_register(&pingv6_prot, 1)):
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
[...]
RIP: 0010:__list_del_entry_valid+0x79/0x160
[...]
Call Trace:
proto_unregister+0xbb/0x550
? trace_preempt_on+0x6f0/0x6f0
? sock_no_shutdown+0x10/0x10
inet6_init+0x153/0x1b8
Fixes: 6d0bfe2261 ("net: ipv6: Add IPv6 support to the ping socket.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 15e668070a ("ipv6: reorder icmpv6_init() and ip6_mr_init()")
moved the cleanup label for ipmr_fail, but should have changed the
contents of the cleanup labels as well. Now we can end up cleaning up
icmpv6 even though it hasn't been initialized (jump to icmp_fail or
ipmr_fail).
Simply undo things in the reverse order of their initialization.
Example of panic (triggered by faking a failure of icmpv6_init):
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
[...]
RIP: 0010:__list_del_entry_valid+0x79/0x160
[...]
Call Trace:
? lock_release+0x8a0/0x8a0
unregister_pernet_operations+0xd4/0x560
? ops_free_list+0x480/0x480
? down_write+0x91/0x130
? unregister_pernet_subsys+0x15/0x30
? down_read+0x1b0/0x1b0
? up_read+0x110/0x110
? kmem_cache_create_usercopy+0x1b4/0x240
unregister_pernet_subsys+0x1d/0x30
icmpv6_cleanup+0x1d/0x30
inet6_init+0x1b5/0x23f
Fixes: 15e668070a ("ipv6: reorder icmpv6_init() and ip6_mr_init()")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tag contains a handful of patches that filtered their way in during
the merge window but just didn't make the deadline. It includes:
* Additional documentation in the riscv,cpu-intc device tree binding
that resulted from some feedback I missed in the original patch set.
* A build fix that provides the definition of tlb_flush() before
including tlb.h, which fixes a RISC-V build regression introduced
during this merge window.
* A cosmetic cleanup to sys_riscv_flush_icache().
-----BEGIN PGP SIGNATURE-----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=5UCG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V fixes from Palmer Dabbelt:
"RISC-V Fixes and Cleanups for 4.19-rc2
This contains a handful of patches that filtered their way in during
the merge window but just didn't make the deadline. It includes:
- Additional documentation in the riscv,cpu-intc device tree binding
that resulted from some feedback I missed in the original patch
set.
- A build fix that provides the definition of tlb_flush() before
including tlb.h, which fixes a RISC-V build regression introduced
during this merge window.
- A cosmetic cleanup to sys_riscv_flush_icache()"
* tag 'riscv-for-linus-4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Use a less ugly workaround for unused variable warnings
riscv: tlb: Provide definition of tlb_flush() before including tlb.h
dt-bindings: riscv,cpu-intc: Cleanups from a missed review
Fixes for 4.19:
- SR-IOV fixes
- Kasan and page fault fix on device removal
- S3 stability fix for CZ/ST
- VCE regression fixes for CIK parts
- Avoid holding the mn_lock when allocating memory
- DC memory leak fix
- BO eviction fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180829202555.2653-1-alexander.deucher@amd.com
