amdgpu_vm_bo_* functions should come much later.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For under voltage, negative value will be applied to voltage
offset. Update the data type to cover this case.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added vega20 overdrive support based on existing OD sysfs
APIs. However, the OD logics are simplified on vega20. So,
the behavior will be a little different and works only on
some limited levels.
V2: fix typo
fix commit description
revise error logs
add support for clock OD
V3: separate clock from voltage OD settings
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'gvt-next-2018-09-04'
drm-intel-next-2018-09-06-1:
UAPI Changes:
- GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some
platforms, which we've failed to communicate to userspace so far. SNA was
modified to do extra flushing on non-coherent GGTT access, while Mesa will
mitigate by always requiring WC mapping (which is non-coherent anyway).
- Neuter Resource Streamer uAPI: There never really were users for the feature,
so neuter it while keeping the interface bits for compatibility. This is a
long due item from past.
Cross-subsystem Changes:
- Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes
Core Changes:
- None
Driver Changes:
- A load of Icelake (ICL) enabling patches (Paulo, Manasi)
- Enabled full PPGTT for IVB,VLV and HSW (Chris)
- Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh)
- Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani)
- Bugzilla #107503: Increase LSPCON timeout (Fredrik)
- Avoid boosting GPU due to an occasional stall in interactive workloads (Chris)
- Apply GGTT coherency W/A only for affected systems instead of all (Chris)
- Fix for infinite link training loop for faulty USB-C MST hubs (Nathan)
- Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris)
- Stop holding ppGTT reference from closed VMAs (Chris)
- Clear error registers after error capture (Lionel)
- Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko)
- Add missing Coffeelake (CFL) PCI IDs (Rodrigo)
- Flush execlists tasklet directly from reset-finish (Chris)
- Fix LPE audio runtime PM (Chris)
- Fix detection of out of range surface positions (GLK/CNL) (Ville)
- Remove wait-for-idle for PSR2 (Dhinakaran)
- Power down existing display hardware resources when display is disabled (Chris)
- Don't allow runtime power management if RC6 doesn't exist (Chris)
- Add debugging checks for runtime power management paths (Imre)
- Increase symmetry in display power init/fini paths (Imre)
- Isolate GVT specific macros from i915_reg.h (Lucas)
- Increase symmetry in power management enable/disable paths (Chris)
- Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre)
- Fix memory leak from HDMI HDCP write function (Brian, Rodrigo)
- Reject Y/Yf tiling on interlaced modes (Ville)
- Use a cached mapping for the physical HWS on older gens (Chris)
- Force slow path of writing relocations to buffer if unable to write to userspace (Chris)
- Do a full device reset after being wedged (Chris)
- Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris)
- Avoid false-positive errors from power wells during init (Imre)
- Reset engines forcibly in exchange of declaring whole device wedged (Mika)
- Reduce context HW ID lifetime in preparation for Icelake (Chris)
- Attempt to recover from module load failures (Chris)
- Keep select interrupts over a reset to avoid missing/losing them (Chris)
- GuC submission backend improvements (Jakub)
- Terminate context images with BB_END (Chris, Lionel)
- Make GCC evaluate GGTT view struct size assertions again (Ville)
- Add selftest to exercise suspend/hibernate code-paths for GEM (Chris)
- Use a full emulation of a user ppgtt context in selftests (Chris)
- Exercise resetting in the middle of a wait-on-fence in selftests (Chris)
- Fix coherency issues on selftests for Baytrail (Chris)
- Various other GEM fixes / self-test updates (Chris, Matt)
- GuC doorbell self-tests (Daniele)
- PSR mode control through debugfs for IGTs (Maarten)
- Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris)
- Cope with errors better in MST link training (Dhinakaran)
- Fix WARN on KBL external displays (Azhar)
- Power well code cleanups (Imre)
- Fixes to PSR debugging (Dhinakaran)
- Make forcewake errors louder for easier catching in CI (WARNs) (Chris)
- Fortify tiling code against programmer errors (Chris)
- Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a
printk format build warning. This is due to hexagon's ffs() being
coded as returning long instead of int.
Fix the printk format warning by changing all of hexagon's ffs() and
fls() functions to return int instead of long. The variables that
they return are already int instead of long. This return type
matches the return type in <asm-generic/bitops/>.
../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim':
../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat]
There are no ffs() or fls() allmodconfig build errors after making this
change.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Patch-mainline: linux-kernel @ 07/22/2018, 16:03
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Fix build warning in arch/hexagon/kernel/dma.c by casting a void *
to unsigned long to match the function parameter type.
../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc':
../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default]
../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Patch-mainline: linux-kernel @ 07/20/2018, 20:17
[rkuo@codeaurora.org: fixed architecture name]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
After switching to the new procfs API, it is supposed to
retrieve the private pointer from PDE_DATA(file_inode(s->file)),
s->private is no longer referred.
Fixes: 1cd6718272 ("netfilter/x_tables: switch to proc_create_seq_private")
Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NF_REPEAT places the packet at the beginning of the iptables chain
instead of accepting or rejecting it right away. The packet however will
reach the end of the chain and continue to the end of iptables
eventually, so it needs the same handling as NF_ACCEPT and NF_DROP.
Fixes: 368982cd7d ("netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracks")
Signed-off-by: Michal 'vorner' Vaner <michal.vaner@avast.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Compiler did not catch incorrect typing in the rcu hook assignment.
% nfct add timeout test-tcp inet tcp established 100 close 10 close_wait 10
% iptables -I OUTPUT -t raw -p tcp -j CT --timeout test-tcp
dmesg - xt_CT: Timeout policy `test-tcp' can only be used by L3 protocol number 25000
The CT target bails out with incorrect layer 3 protocol number.
Fixes: 6c1fd7dc48 ("netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object")
Reported-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Now that cttimeout support for nft_ct is in place, these should depend
on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the
policy if this option is not enabled.
[ 71.600121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[...]
[ 71.600141] CPU: 3 PID: 7612 Comm: nft Not tainted 4.18.0+ #246
[...]
[ 71.600188] Call Trace:
[ 71.600201] ? nft_ct_timeout_obj_dump+0xc6/0xf0 [nft_ct]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Doug Smythies says:
Sometimes it is desirable to temporarily disable, or clear,
the iptables rule set on a computer being controlled via a
secure shell session (SSH). While unwise on an internet facing
computer, I also do it often on non-internet accessible computers
while testing. Recently, this has become problematic, with the
SSH session being dropped upon re-load of the rule set.
The problem is that when all rules are deleted, conntrack hooks get
unregistered.
In case the rules are re-added later, its possible that tcp window
has moved far enough so that all packets are considered invalid (out of
window) until entry expires (which can take forever, default
established timeout is 5 days).
Fix this by clearing maxwin of existing tcp connections on register.
v2: don't touch entries on hook removal.
v3: remove obsolete expiry check.
Reported-by: Doug Smythies <dsmythies@telus.net>
Fixes: 4d3a57f23d ("netfilter: conntrack: do not enable connection tracking unless needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Committing a transaction can consume some metadata of it's own, we now
reserve a small amount of metadata to cover this. Free metadata
reported by the kernel will not include this reserve.
If any of the reserve has been used after a commit we enter a new
internal state PM_OUT_OF_METADATA_SPACE. This is reported as
PM_READ_ONLY, so no userland changes are needed. If the metadata
device is resized the pool will move back to PM_WRITE.
These changes mean we never need to abort and rollback a transaction due
to running out of metadata space. This is particularly important
because there have been a handful of reports of data corruption against
DM thin-provisioning that can all be attributed to the thin-pool having
ran out of metadata space.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
An ACPI buffer that was allocated was not being freed after use.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
ACPI buffers were being allocated but never freed.
Reported-by: Pinzhen Xu <pinzhen.xu@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
This fixes a NULL pointer dereference that can happen if the UDL
driver is unloaded before the framebuffer is initialized. This can
happen e.g. if the USB device is unplugged right after it was plugged
in.
As explained by Stéphane Marchesin:
It happens when fbdev is disabled (which is the case for Chrome OS).
Even though intialization of the fbdev part is optional (it's done in
udlfb_create which is the callback for fb_probe()), the teardown isn't
optional (udl_driver_unload -> udl_fbdev_cleanup ->
udl_fbdev_destroy).
Note that udl_fbdev_cleanup *tries* to be conditional (you can see it
does if (!udl->fbdev)) but that doesn't work, because udl->fbdev is
always set during udl_fbdev_init.
Cc: stable@vger.kernel.org
Suggested-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Lundmark <lndmrk@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180528142711.142466-1-lndmrk@chromium.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Two patches from the R40 display pipeline support series weren't applied
with the rest of the series. When they did get applied, the -rc6
deadline for drm-misc-next had past, so they didn't get into 4.19-rc1
with the rest of the series. However, the two patches are crucial in
the parsing of the R40's display pipeline graph in the device tree.
Without them, the driver crashes because it can't follow the odd graph
structure.
This patch removes the R40 compatibles from the sun4i-drm driver,
effectively disabling DRM support for the R40 for one release cycle.
This will prevent the driver from crashing upon probing.
The compatibles should be reinstated for the next release.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180827083950.602-1-wens@csie.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
When there's no scaling requested ->is_unity should be true no matter
the format.
Also, when no scaling is requested and we have a multi-planar YUV
format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only
set ->x_scaling[0] to VC4_SCALING_PPF.
Doing this fixes an hardly visible artifact (seen when using modetest
and a rather big overlay plane in YUV420).
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725122907.13702-1-boris.brezillon@bootlin.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
We should update GuC power domain states also when GuC submission
is disabled, otherwise GuC might complain or ignore our requests.
This seems to be required for all currently released GuC firmwares.
v2: it is only needed by pre-Gen11 firmwares
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180910104150.101752-1-michal.wajdeczko@intel.com
This reverts commit a81cf9799a.
The patch causes a regression, which I cannot find the reason for.
So let's revert for now, as a revert hurts only performance.
Original report:
I was trying to resolve the problem with Oliver but we don't get any conclusion
for 5 months, so I am now sending this to mail list and cdc_acm authors.
I am using simple request-response protocol to obtain the boiller parameters
in constant intervals.
A simple one transaction is:
1. opening the /dev/ttyACM0
2. sending the following 10-bytes request to the device:
unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03};
3. reading response (frame of 74 bytes length).
4. closing the descriptor
I am doing this transaction with 5 seconds intervals.
Before the bad commit everything was working correctly: I've got a requests and
a responses in a timely manner.
After the bad commit more time I am using the kernel module, more problems I have.
The graph [2] is showing the problem.
As you can see after module load all seems fine but after about 30 minutes I've got
a plenty of EAGAINs when doing read()'s and trying to read back the data.
When I rmmod and insmod the cdc_acm module again, then the situation is starting
over again: running ok shortly after load, and more time it is running, more EAGAINs
I have when calling read().
As a bonus I can see the problem on the device itself:
The device is configured as you can see here on this screen [3].
It has two transmision LEDs: TX and RX. Blink duration is set for 100ms.
This is a recording before the bad commit when all is working fine: [4]
And this is with the bad commit: [5]
As you can see the TX led is blinking wrongly long (indicating transmission?)
and I have problems doing read() calls (EAGAIN).
Reported-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: a81cf9799a ("cdc-acm: implement put_char() and flush_chars()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since renesas_usb3 udc driver calls usb_of_get_companion_dev()
which is on usb/core/of.c, build error like below happens if we
disable CONFIG_USB because the usb/core/ needs CONFIG_USB:
ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined!
According to the usb/gadget/Kconfig, "NOTE: Gadget support
** DOES NOT ** depend on host-side CONFIG_USB !!".
So, to fix the issue, this patch changes the usb_of_get_companion_dev()
place from usb/core/of.c to usb/common/common.c to be called by both
host and gadget.
Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39facfa01c ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MTK xHCI controller use some reserved bytes in endpoint context for
bandwidth scheduling, so need keep them in xhci_endpoint_copy();
The issue is introduced by:
commit f5249461b5 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")
It resets endpoints and will drop bandwidth scheduling parameters used
by interrupt or isochronous endpoints on MTK xHCI controller.
Fixes: f5249461b5 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")
Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB
interfaces, without the device changing VID/PID or configuration number.
When the configuration is updated and interfaces are added/removed, the
interface numbers change. This means that the current code for matching
EP06 does not work.
This patch removes the current EP06 interface number match, and replaces
it with a match on class, subclass and protocol. Unfortunately, matching
on those three alone is not enough, as the diag interface exports the
same values as QMI. The other serial interfaces + adb export different
values and do not match.
The diag interface only has two endpoints, while the QMI interface has
three. I have therefore added a check for number of interfaces, and we
ignore the interface if the number of endpoints equals two.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The gasket in-kernel framework, recently introduced under staging,
re-implements what is already long-time provided by the UIO
subsystem, with extra PCI BAR remapping and MSI conveniences.
Before moving it out of staging, make sure we add the new bits to
the UIO framework instead, then transform its signle client, the
Apex driver, to a proper UIO driver (uio_driver.h).
Link: https://lkml.kernel.org/r/20180828103817.GB1397@do-kernel
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 550ddadcc7 ("tty: hvc: hvc_write() may sleep") broke the
termination condition in case the driver stops accepting characters.
This can result in unnecessary polling of the busy driver.
Restore it by testing the hvc_push return code.
Tested-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ec97eaad13 ("tty: hvc: hvc_poll() break hv read loop") causes
the virtio console to hang at times (e.g., if you paste a bunch of
characters to it.
The reason is that get_chars must return 0 before we can be sure the
driver will kick or poll input again, but this change only scheduled a
poll if get_chars had returned a full count. Change this to poll on
any > 0 count.
Reported-by: Matteo Croce <mcroce@redhat.com>
Reported-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1c892e38ce ("regulator: da9063: Handle less LDOs on DA9063L")
reordered the da9063_regulator_info[] array, but not the DA9063_ID_*
regulator ids and not the da9063_matches[] array, because ids are used
as indices in the array initializer. This mismatch between regulator id
and da9063_regulator_info[] array index causes the driver probe to fail
because constraints from DT are not applied to the correct regulator:
da9063 0-0058: Device detected (chip-ID: 0x61, var-ID: 0x50)
DA9063_BMEM: Bringing 900000uV into 3300000-3300000uV
DA9063_LDO9: Bringing 3300000uV into 2500000-2500000uV
DA9063_LDO1: Bringing 900000uV into 3300000-3300000uV
DA9063_LDO1: failed to apply 3300000-3300000uV constraint(-22)
This patch reorders the DA9063_ID_* as apparently intended, and with
them the entries in the da90630_matches[] array.
Fixes: 1c892e38ce ("regulator: da9063: Handle less LDOs on DA9063L")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates
memory using kmalloc() and partially fills it by calling
snd_emu10k1_fx8010_info() before returning the resulting
structure to userspace, leaving uninitialized holes. Let's
just use kzalloc() here.
BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html
Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The MMTLR bit is in the CS4265_SPDIF_CTL2 register at address 0x12 bit 0
and not at address 0x0 bit 1. Fix this.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Since the addition of WARN_ON() in nand_subop_get_data/addr_len()
helpers, this driver will produce harmless warnings (mostly at probe)
just because it always calls the nand_subop_get_data_len() helper in
the parsing function (even on non-data instructions, where this value
is meaningless and unneeded).
Fix these warnings by deriving the length only when it is relevant.
Fixes: 760c435e0f ("mtd: rawnand: make subop helpers return unsigned values")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Fix a few issues in Documentation/x86/earlyprintk.txt:
- correct typos, punctuation, missing word, wrong word
- change product name from Netchip to NetChip
- expand where to add "earlyprintk=dbg"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Link: http://lkml.kernel.org/r/d0c40ac3-7659-6374-dbda-23d3d2577f30@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Perf can record user stack data in response to a synchronous request, such
as a tracepoint firing. If this happens under set_fs(KERNEL_DS), then we
end up reading user stack data using __copy_from_user_inatomic() under
set_fs(KERNEL_DS). I think this conflicts with the intention of using
set_fs(KERNEL_DS). And it is explicitly forbidden by hardware on ARM64
when both CONFIG_ARM64_UAO and CONFIG_ARM64_PAN are used.
So fix this by forcing USER_DS when recording user stack data.
Signed-off-by: Yabin Cui <yabinc@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 88b0193d94 ("perf/callchain: Force USER_DS when invoking perf_callchain_user()")
Link: http://lkml.kernel.org/r/20180823225935.27035-1-yabinc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Trivial fix to spelling mistake in pr_err() error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-janitors@vger.kernel.org
Link: http://lkml.kernel.org/r/20180824112235.8842-1-colin.king@canonical.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
c3bc8fd637 ("tracing: Centralize preemptirq tracepoints and unify their usage")
added the inclusion of <trace/events/preemptirq.h>.
liblockdep doesn't have a stub version of that header so now fails to build.
However, commit:
bff1b208a5 ("tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"")
removed the use of functions declared in that header. So delete the #include.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Fixes: bff1b208a5 ("tracing: Partial revert of "tracing: Centralize ...")
Fixes: c3bc8fd637 ("tracing: Centralize preemptirq tracepoints ...")
Link: http://lkml.kernel.org/r/20180828203315.GD18030@decadent.org.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
HW register descriptions says:
"DMA Channel Reset...Software must confirm that this bit is
cleared before reprogramming any of the channel configuration registers."
There could be cases where dma stop errored out leaving dma channel
in reset state. We need to ensure that before the start of another dma,
channel is out of the reset state.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ovl_free_fs() dereferences ofs->workbasedir and ofs->upper_mnt in cases when
those might not have been initialized yet.
Fix the initialization order for these fields.
Reported-by: syzbot+c75f181dc8429d2eb887@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 95e6d4177c ("ovl: grab reference to workbasedir early")
Fixes: a9075cdb46 ("ovl: factor out ovl_free_fs() helper")
Leaving the DRM driver enabled on reboot or kexec has the annoying
effect of leaving the display generating transactions whilst the
IOMMU has been shut down.
In turn, the IOMMU driver (which shares its interrupt line with
the VOP) starts warning either on shutdown or when entering the
secondary kernel in the kexec case (nothing is expected on that
front).
A cheap way of ensuring that things are nicely shut down is to
register a shutdown callback in the platform driver.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com
Cc: stable@vger.kernel.org
Fix kernel-doc warning for missing 'flags' parameter description:
../kernel/sched/fair.c:3371: warning: Function parameter or member 'flags' not described in 'attach_entity_load_avg'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ea14b57e8a ("sched/cpufreq: Provide migration hint")
Link: http://lkml.kernel.org/r/cdda0d42-880d-4229-a9f7-5899c977a063@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It can happen that load_balance() finds a busiest group and then a
busiest rq but the calculated imbalance is in fact 0.
In such situation, detach_tasks() returns immediately and lets the
flag LBF_ALL_PINNED set. The busiest CPU is then wrongly assumed to
have pinned tasks and removed from the load balance mask. then, we
redo a load balance without the busiest CPU. This creates wrong load
balance situation and generates wrong task migration.
If the calculated imbalance is 0, it's useless to try to find a
busiest rq as no task will be migrated and we can return immediately.
This situation can happen with heterogeneous system or smp system when
RT tasks are decreasing the capacity of some CPUs.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dietmar.eggemann@arm.com
Cc: jhugo@codeaurora.org
Link: http://lkml.kernel.org/r/1536306664-29827-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
523e979d31 ("sched/core: Use PELT for scale_rt_capacity()")
scale_rt_capacity() returns the remaining capacity and not a scale factor
to apply on cpu_capacity_orig. arch_scale_cpu() is directly called by
scale_rt_capacity() so we must take the sched_domain argument.
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 523e979d31 ("sched/core: Use PELT for scale_rt_capacity()")
Link: http://lkml.kernel.org/r/20180904093626.GA23936@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
