Move query SQ state function from mlx5_ib to mlx5_core in order to
have it in shared code.
It will be used in a downstream patch from mlx5e.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In some firmware configuration, UMR usage from Virtual Functions is restricted.
This information is published to the driver using new capability bits.
Avoid using UMRs in these cases and use the Firmware slow-path flow to create
mkeys and populate them with Virtual to Physical address translation.
Older drivers that do not have this patch, will end up using memory keys that
aren't populated with Virtual to Physical address translation that is done
part of the UMR work.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
net_sem is some undefined area name, so it will be better
to make the area more defined.
Rename it to pernet_ops_rwsem for better readability and
better intelligibility.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- mt2712: update power domains to reflect design changes in the SoC
- fix initialisation of power subdomains
- add support for mt7623a SoC
- use defines for mt2701 bus protection mask
-----BEGIN PGP SIGNATURE-----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=BL8y
-----END PGP SIGNATURE-----
Merge tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers
Pull "ARM: mediatek: updates for soc drivers for v4.16-next" from Matthias Brugger:
scpsy:
- mt2712: update power domains to reflect design changes in the SoC
- fix initialisation of power subdomains
- add support for mt7623a SoC
- use defines for mt2701 bus protection mask
* tag 'v4.16-next-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: update power domain data of MT2712
dt-bindings: soc: update MT2712 power dt-bindings
soc: mediatek: fix the mistaken pointer accessed when subdomains are added
soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC
soc: mediatek: avoid hardcoded value with bus_prot_mask
dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding
dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC
On omap5 there is an aux control module that we are not handling
currently for clocks, so let's add support for it.
-----BEGIN PGP SIGNATURE-----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=WMHn
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Two omap5 specific aux control module patches for v4.17" from Tony Lindgren:
On omap5 there is an aux control module that we are not handling
currently for clocks, so let's add support for it.
* tag 'omap-for-v4.17/soc-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP5: control: add support for control module wkup pad config
ARM: omap2+: control: add support for auxiliary control module instances
Some qcom platforms make some GPIOs or pins unavailable for use by
non-secure operating systems, and thus reading or writing the registers
for those pins will cause access control issues. Add support for a DT
property to describe the set of GPIOs that are available for use so that
higher level OSes are able to know what pins to avoid reading/writing.
Non-DT platforms can add support by directly updating the
chip->valid_mask.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Uninline dmi_get_bios_year() which, in particular, allows us
to optimize it in the future.
While doing this, convert the function to return an error code
when BIOS date is not present or not parsable, or CONFIG_DMI=n.
Additionally, during the move, add a bit of documentation.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Fixes: 492a1abd61 ("dmi: Introduce the dmi_get_bios_year() helper function")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 7af1bb19f1d7 ("reset: add support for non-DT systems")
introduced reset control lookup mechanism for boards that still use
board files.
The routine used to register lookup entries takes the corresponding
reset_controlled_dev structure as argument.
It's been determined however that for the first user of this new
interface - davinci psc driver - it will be easier to register the
lookup entries using the reset controller device name.
This patch changes the way lookup entries are added.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[p.zabel@pengutronix.de: added missing ERR_PTR]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The reset framework only supports device-tree. There are some platforms
however, which need to use it even in legacy, board-file based mode.
An example of such architecture is the DaVinci family of SoCs which
supports both device tree and legacy boot modes and we don't want to
introduce any regressions.
We're currently working on converting the platform from its hand-crafted
clock API to using the common clock framework. Part of the overhaul will
be representing the chip's power sleep controller's reset lines using
the reset framework.
This changeset extends the core reset code with a new reset lookup
entry structure. It contains data allowing the reset core to associate
reset lines with devices by comparing the dev_id and con_id strings.
It also provides a function allowing drivers to register lookup entries
with the framework.
The new lookup function is only called as a fallback in case the
of_node field is NULL and doesn't change anything for current users.
Tested with a dummy reset driver with several lookup entries.
An example lookup table registration from a driver can be found below:
static struct reset_control_lookup foobar_reset_lookup[] = {
RESET_LOOKUP("foo.0", "foo", 15),
RESET_LOOKUP("bar.0", NULL, 5),
};
foobar_probe()
{
...
reset_controller_add_lookup(&rcdev, foobar_reset_lookup,
ARRAY_SIZE(foobar_reset_lookup));
...
}
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In order to properly support compatibility strings as described in the
bindings/mtd/partition.txt "ofpart" type should be treated as an
indication for looking into OF. MTD should check "compatible" property
and search for a matching parser rather than blindly trying the one
supporting "fixed-partitions".
It also means that existing "fixed-partitions" parser should get renamed
to use a more meaningful name.
This commit achievies that aim by introducing a new mtd_part_of_parse().
It works by looking for a matching parser for every string in the
"compatibility" property (starting with the most specific one).
Please note that driver-specified parsers still take a precedence. It's
assumed that driver providing a parser type has a good reason for that
(e.g. having platform data with device-specific info). Also doing
otherwise could break existing setups. The same applies to using default
parsers (including "cmdlinepart") as some overwrite DT data with cmdline
argument.
Partition parsers can now provide an of_match_table to enable
flash<-->parser matching via device tree as documented in the
mtd/partition.txt.
This support is currently limited to built-in parsers as it uses
request_module() and friends. This should be sufficient for most cases
though as compiling parsers as modules isn't a common choice.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
node_memmap_size_bytes() has been unused since the v3.9 kernel, so remove it.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: f03574f2d5 ("x86-32, mm: Rip out x86_32 NUMA remapping code")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803262325540.256524@chino.kir.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Newer NICs (ConnectX-5 and onward) can apply vlan pop or push as an
action taking place during flow steering. Add the core bits for that.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Added the following packets dropped while vport down statistics:
Rx dropped while vport down - counts packets which were steered by
e-switch to a vport, but dropped since the vport was down. This counter
will be shown on ip link tool as part of the vport rx_dropped counter.
Tx dropped while vport down - counts packets which were transmitted by
a vport, but dropped due to vport logical link down. This counter
will be shown on ip link tool as part of the vport tx_dropped counter.
The counters are read from FW by command QUERY_VNIC_ENV.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Added the following packets drop counter:
Rx steering missed dropped packets - counts packets which were dropped
due to miss on NIC rx steering rules.
This counter will be shown on ethtool as a new counter called
rx_steer_missed_packets.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add support for new FW command QUERY_VNIC_ENV.
The command is used by the driver to query vnic diagnostic statistics
from FW.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Implement set/get functions to configure PFC stall prevention
timeout by tunables api through ethtool.
By default the stall prevention timeout is configured to 8 sec.
Timeout range is: 80-8000 msec.
Enabling stall prevention with the auto timeout will set
the timeout to 100 msec.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add the needed capability bit and counters to device spec description.
Expose the following two counters in ethtool:
tx_pause_storm_warning_events: when the device is stalled for a period
longer than a pre-configured watermark, the counter increase, allowing
the debug utility an insight into current device status.
tx_pause_storm_error_events: when the device is stalled for a period
longer than a pre-configured timeout, the pause transmission is disabled,
and the counter increase.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Since ipmr and ip6mr are using the same mr_mfc struct at their core, we
can now refactor the ipmr_cache_{hold,put} logic and apply refcounting
to both ipmr and ip6mr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to discern whether a given FIB rule notification relates
to the default rule inserted when registering ip6mr or a different one.
Would later be used by drivers wishing to offload ipv6 multicast routes
but unable to offload rules other than the default one.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since all the primitive elements used for the notification done by ipmr
are now common [mr_table, mr_mfc, vif_device] we can refactor the logic
for dumping them to a common file.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like vif notifications, move the notifier struct for MFC as well as its
helpers into a common file; Currently they're only used by ipmr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fib-notifiers are tightly coupled with the vif_device which is
already common. Move the notifier struct definition and helpers to the
common file; Currently they're only used by ipmr.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Last user is gone after bdf5bd7f21 "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.
dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is preparation to drop NETDEV_UNREGISTER_FINAL.
Since the cmd is used in usnic_ib_netdev_event_to_string()
to get cmd name, after plain removing NETDEV_UNREGISTER_FINAL
from everywhere, we'd have holes in event2str[] in this
function.
Instead of that, let's make NETDEV_XXX commands names
available for everyone, and to define netdev_cmd_to_name()
in the way we won't have to shaffle names after their
numbers are changed.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Can be useful to check INET_ANY address for both ipv4/ipv6 addresses.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The blackfin architecture is getting removed, so we can clean up
all the special cases in the musb driver.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Acked-by: Bin Liu <b-liu@ti.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
[arnd: adding in fixups from Aaron and Stephen]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The tile architecture is getting removed, so the ehci and ohci platform
glue drivers are no longer needed. In case of ohci, this is the last
one to define a PLATFORM_DRIVER macro, so we can remove even more.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The blackfin architecture is getting removed, so this
one is obsolete as well.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The blackfin architecture is getting removed, so these are
now obsolete.
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The blackfin and m32r architectures are getting removed, so it's
time to clean up the logos as well.
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Tile architecture is getting removed, so we no longer need this either.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The blackfin architecture is getting removed, so the bfin_mac driver
is now obsolete.
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This function returns a string with the currently in-use implementation
of the crc32c algorithm, i.e crc32c-generic (for unoptimised, generic
implementation) or crc32c-intel for the sse optimised version. This
will be used by btrfs.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
[ use crypto_shash_driver_name as suggested by Herbert ]
Signed-off-by: David Sterba <dsterba@suse.com>
Kill an unused extern entry from quota.h
which is leftover of below patch.
[f32764bd2: quota: Convert quota statistics to generic percpu_counter]
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Jan Kara <jack@suse.cz>
The BTF (BPF Type Format) verifier needs to reuse the current
BPF verifier log. Hence, it requires the following changes:
(1) Expose log_write() in verifier.c for other users.
Its name is renamed to bpf_verifier_vlog().
(2) The BTF verifier also needs to check
'log->level && log->ubuf && !bpf_verifier_log_full(log);'
independently outside of the current log_write(). It is
because the BTF verifier will do one-check before
making multiple calls to btf_verifier_vlog to log
the details of a type.
Hence, this check is also re-factored to a new function
bpf_verifier_log_needed(). Since it is re-factored,
we can check it before va_start() in the current
bpf_verifier_log_write() and verbose().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull locking fixes from Ingo Molnar:
"Two fixes: tighten up a jump-labels warning to not trigger on certain
modules and fix confusing (and non-existent) mutex API documentation"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Disable jump labels in __exit code
locking/mutex: Improve documentation
The syscall entry points to the kernel defined by SYSCALL_DEFINEx()
and COMPAT_SYSCALL_DEFINEx() should only be called from userspace
through kernel entry points, but not from the kernel itself. This
will allow cleanups and optimizations to the entry paths *and* to
the parts of the kernel code which currently need to pretend to be
userspace in order to make use of syscalls.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The definition IPCMNI is only used in ipc/util.h and ipc/util.c. So
there is no reason to keep it in a header file that the whole kernel
can see. Move it into util.h to simplify future maintenance.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the users are now in ipc/msg.c so make the definition local to
that file to make code maintenance easier. AKA to prevent rebuilding
the entire kernel when struct msg_queue changes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the users are now in ipc/shm.c so make the definition local to
that file to make code maintenance easier. AKA to prevent rebuilding
the entire kernel when struct shmid_kernel changes.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=rCow
-----END PGP SIGNATURE-----
Merge tag 'at24-4.17-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-4.17
"three new special cases for device tree compatible strings"
Now that the i2c-pca-plaform driver is using the device managed API for
gpios there is no need for the reset gpio to be specified via
i2c_pca9564_pf_platform_data.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
mlx-platform does not provide a bus number to i2c-mlxcpld, assuming it
is always one. On some x86 systems, other i2c drivers may probe before
i2c-mlxcpld, causing bus one to be busy.
Make mlx-platform determine which adapter number is free prior to
activating i2c-mlxpld, adjusting the mux base numbers accordingly.
Update the mlxreg-hotplug pdata similarly.
This adds an explicit mlx-platform build dependency on I2C, update the
Kconfig accordingly. Add the missing REGMAP dependency while we're at
it.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Rewrite commit message more concisely]
[dvhart: Add build dependencies]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
mlx-platform activates i2c-mux-reg, which creates buses needed by
mlxreg-hotplug. If the mlxreg-hotplug probe runs before the i2c-mux-reg
probe completes, it may attempt to connect a device to an adapter number
that has not been created yet, and fail.
Make mlx-platform driver record the highest bus number in mlxreg-hotplug
platform data and defer mlxreg-hotplug probe until all the buses are
created.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: rewrite commit message more concisely]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
