Use newly added R-Car SATA Gen3 fallback compat string
in the DT of the r8a7795 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
The DU LVDS output is on port 3 on R8A7795 but on port 2 on R8A7796. The
lvds_connector label thus can't be defined in salvator-common.dtsi,
common to the two SoCs.
The lvds_connector label is meant for convenience to be referenced from
panel device tree files, such as r8a77xx-aa104xd12-panel.dtsi or
r8a77xx-aa121td01-panel.dtsi. As those files are not included in any
device tree source, and the label never used elsewhere, we can simply
remove it. Out-of-tree patches that include panel device tree files can
then add a
#define lvds_connector du_out_lvds0
before including the panel device tree file.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
1. Replaces old coresight ATB programmable replicator compatible with
new and more generic one
2. Replaces incorrect usage of underscores for device node names in the
device tree with hyphen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJZjbz8AAoJEABBurwxfuKY+JkP/1xDAZBQHLGbr2p9x6Za/Ozs
N8+5p4o2c07K8Gc8YsmcruxtdrtXIgCZk2cp+m0jTaO6ox68TuMMwIF69BR12SaK
oqxxmk8VNSU5SaOr3KrdQDpGTFrBm9yq0PZkBtGyzlxeWgbSOLmcrFDP2jc9NbQ3
0fvKzybF/8VvzdaO9CNUO9oYXLZeZdLKAjcOIkaUWqVmX12/D+akTXEVt8eTgEik
w56qP4RYYOywb3v2qqyD+0oPB59pAjyjW/QOjokPCb8YLat3pR6VH9FKtmYr44hU
JpHw4bl/CdYSgS1e8ZT1RSy14GqcTOJ4yPJGgChPVWf//ue4impvAldR0tm9gOS6
ooc9PCsz22FxlfPAoNpG0TEvC/tzYYyiagBCb/hFQqnN/lqbVs9RcTG6lbyLb5KE
DnTPVNapt5Eqn74TBwUvr1J7z4q9LqyuhBNAl12QUeHtfTPp9KVrntiLadpYk5Lh
0qFavNAI9Q9FZRN11G0IuEMHm2PNl3XjEpQE/oVGHGTiHVmClIwiWOinMB9AmRrJ
K2XF/nKS6+/wqsWxezXO6RvJPkO1thkBpVkgImlPNRXY2FvzUSXeLu9c3ImL13K5
BsXAmuU4nnhH1Oe6WWFbhQ6lCitUAfq2l3HS+8SH0hPw2J8iMX6tNLAK+i3FQY5Z
LAvjk2l3n/QLkXnZA2CO
=jaSe
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Vexpress/Juno DT updates for v4.14" from Sudeep Holla:
1. Replaces old coresight ATB programmable replicator compatible with
new and more generic one
2. Replaces incorrect usage of underscores for device node names in the
device tree with hyphen
* tag 'juno-updates-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: replace underscores with hyphen in device node names
arm64: dts: juno: Use the new coresight replicator string
The usual improvement patches:
- R_INTC interrupt controller enabled for the A64 SoC
- AXP803 PMIC added and enabled on the Pine64 and SoPine boards
-----BEGIN PGP SIGNATURE-----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=9oen
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Pull "Allwinner arm64 DT changes for 4.14" from Chen-Yu Tsai:
The usual improvement patches:
- R_INTC interrupt controller enabled for the A64 SoC
- AXP803 PMIC added and enabled on the Pine64 and SoPine boards
* tag 'sunxi-dt64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: add AXP803 PMIC support to SoPine and the baseboard
arm64: allwinner: a64: enable AXP803 regulators for Pine64
arm64: allwinner: a64: add DTSI file for AXP803 PMIC
arm64: allwinner: a64: add AXP803 node to Pine64 device tree
arm64: allwinner: a64: add NMI (R_INTC) controller on A64
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.
rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.
The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.
The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlmET9EQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgZbjCACKFO9Hp8Xwwg2nEM8DL3i+MlGaqxjIrcsb
WskuVOJjkAA4hMnrd7XvbpzJJusAquGqMd042ZCWtrNa1AwzCy0ZkYjDFNL27rXH
DqrHmJZowSoTHxlo8QKaevXH3ZZnp8TDz4IqaD0+UZx7DgZSOjR1a+feseh1Jn/V
9WBUJhNAFtKMiJBkTIpaDUk0E6OxIspdvlJurYmwUvDbfZKlpZrXHYKXSuUhFS9s
JX4Dqi5eF96Mctpi8GhaHGf7awPQf4oQBZfsXxhhS/efzX/v0HWqUPt40o2THi0F
ZbFFE3xAFaWisA+cbg8xnzJc8ZAwz2UmS6FgQ9lrqKyGN74buwgP
=spNi
-----END PGP SIGNATURE-----
Merge tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "Rockchip dts64 changes for 4.14" from Heiko Stübner:
64bit Rockchip devicetree changes containing fixes for pinctrl typos
and the use of keep-power-in-suspend in non-sdio nodes as well as the
removal of the deprecated num-slots property from dwmmc nodes.
rk3328 gets support for spdif, io-domains and usb (including enablement
of usb on the evaluation board), while rk3368 gains support for spdif.
The biggest chunk of course aims for the rk3399 with a number of pcie
changes, support for the mali gpu, a new power-domain, sdmmc support
on the firefly board and dynamic-power-coefficients.
The gru family also gets support for their quite central pwm regulators
using the newly introduced vctrl regulator types.
* tag 'v4.14-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: update dynamic-power-coefficient for rk3399
arm64: dts: rockchip: add rk3328 spdif node
arm64: dts: rockchip: add rk3368 spdif node
arm64: dts: rockchip: enable sdmmc controller on rk3399-firefly
arm64: dts: rockchip: Add rk3328 io-domain node
arm64: dts: rockchip: kill pcie_clkreqn and pcie_clkreqnb for rk3399
arm64: dts: rockchip: change clkreq mode for rk3399-firefly
arm64: dts: rockchip: enable the GPU for RK3399-GRU
arm64: dts: rockchip: add ARM Mali GPU node for RK3399 SoCs
dt-bindings: gpu: add the RK3399 mali for rockchip specifics
arm64: dts: rockchip: remove abused keep-power-in-suspend
arm64: dts: rockchip: remove num-slots from all platforms
arm64: dts: rockchip: change clkreq mode for rk3399-evb
arm64: dts: rockchip: add SdioAudio pd control for rk3399
arm64: dts: rockchip: enable usb2 for RK3328 evaluation board
arm64: dts: rockchip: add usb2 nodes for RK3328 SoCs
arm64: dts: rockchip: set rk3399 dynamic CPU power coefficients
arm64: dts: rockchip: Use vctrl regulators for dynamic CPU voltages on Gru/Kevin
arm64: dts: rockchip: Update CPU regulator voltage ranges for Gru
arm64: dts: rockchip: fix typo in mmc pinctrl
* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC
* Add R-Car D3 (r8a77995) SoC and Draak board support
Adds minimal support for the R-Car D3 SoC and the Draak development
board, allowing to boot from a ramdisk using a serial console.
* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board
The VC6 is an I2C-controlled programmable clock generator, used on the
board to provide a display dot clock. Add it to DT.
* Add missing second pair of DMA names to MSIOF nodes to
R-Car M3-W (r8a7796) SoC
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
DMA specifiers. However, the second pair of corresponding DMA names was
missing.
* Add support for the DU to R-Car H3 (r8a7795) SoC
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
ES2.0 are compatible save for the links to the VSPs that are described
explicitly in DT, so there's no need for a new ES2-specific compatible
string.
* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Enable DU on R-Car M3-W (r8a7796) Salvator-X board
* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
slave device."
* Move CPG_AUDIO_CLK_I from board to soc files
Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
SoC-specific, not board-specific."
* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
the distortion correction engine is a drawing processor with a simple
instruction system capable of referencing data on an external memory as
2D texture data and performing texture mapping and drawing with respect
to any shape that is split into triangular objects."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ehXW
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Pull "Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:
* Add usb2.0 for R-Car H3 (r8a7795) ES2.0 SoC
* Add R-Car D3 (r8a77995) SoC and Draak board support
Adds minimal support for the R-Car D3 SoC and the Draak development
board, allowing to boot from a ramdisk using a serial console.
* Add Add VC6 clock generator to R-Car H3 (r8a7795)/Salvator-XS board
The VC6 is an I2C-controlled programmable clock generator, used on the
board to provide a display dot clock. Add it to DT.
* Add missing second pair of DMA names to MSIOF nodes to
R-Car M3-W (r8a7796) SoC
MSIOF0 and MSIOF1 are tied to two DMA controllers through two pairs of
DMA specifiers. However, the second pair of corresponding DMA names was
missing.
* Add support for the DU to R-Car H3 (r8a7795) SoC
Add a compatible string and VSP links to the DU node. The H3 ES1.x and H3
ES2.0 are compatible save for the links to the VSPs that are described
explicitly in DT, so there's no need for a new ES2-specific compatible
string.
* Enable HDMI on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Enable DU on R-Car M3-W (r8a7796) Salvator-X board
* Enable I2C for DVFS on R-Car H3 (r8a7795) and M3-W (r8a7796) ULCB boards
* Add Add DRIF support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Ramesh Shanmugasundaram says, "R-Car Gen3 DRIF is a SPI like receive only
slave device."
* Move CPG_AUDIO_CLK_I from board to soc files
Geert Uytterhoeven says, "The definition of CPG_AUDIO_CLK_I is
SoC-specific, not board-specific."
* Add IMR-LX4 support to R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs
Sergei Shtylyov says, "The image renderer light extended 4 (IMR-LX4) or
the distortion correction engine is a drawing processor with a simple
instruction system capable of referencing data on an external memory as
2D texture data and performing texture mapping and drawing with respect
to any shape that is split into triangular objects."
* tag 'renesas-arm64-dt-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (31 commits)
arm64: dts: renesas: r8a7795: add hsusb ch3 device node
arm64: dts: renesas: r8a7795: add usb-dmac ch2 and ch3 device nodes
arm64: dts: renesas: r8a7795: add usb2.0 host ch3 device nodes
arm64: dts: renesas: r8a7795: add usb2_phy ch3 device node
arm64: dts: renesas: r8a7795: Add usb companion property in EHCI
arm64: dts: renesas: Add Renesas Draak board support
arm64: dts: renesas: Add Renesas R8A77995 SoC support
arm64: renesas: Add Renesas R8A77995 Kconfig support
arm64: dts: r8a7795: salvator-xs: Connect DU dot clocks 0 and 3
arm64: dts: salvator-xs: Add VC6 clock generator
arm64: dts: r8a7796: Add missing second pair of DMA names to MSIOF nodes
arm64: dts: r8a7795: Add all MSIOF nodes
arm64: dts: r8a7795: Add support for the DU
arm64: dts: ulcb: Enable HDMI output
arm64: dts: ulcb: Add HDMI output connector
arm64: dts: r8a7796: m3ulcb: Add DU external dot clocks
arm64: dts: r8a7795: h3ulcb: Add DU external dot clocks
arm64: dts: ulcb: Add DU external dot clock sources
arm64: dts: r8a7796: salvator-x: Enable HDMI output
arm64: dts: r8a7796: salvator-x: Add DU external dot clocks
...
1. Remove deprecated and unneeded properties from Exynos boards.
2. Implement proper (working) support for USB On-The-Go on Exynos5433
TM2/TM2E boards.
-----BEGIN PGP SIGNATURE-----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=hQn1
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Pull "Samsung DTS ARM64 changes for v4.14" from Krzysztof Kozłowski:
1. Remove deprecated and unneeded properties from Exynos boards.
2. Implement proper (working) support for USB On-The-Go on Exynos5433
TM2/TM2E boards.
* tag 'samsung-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Remove num-slots from exynos platforms
arm64: dts: exynos: Add extcon property for TM2 and TM2E
arm64: dts: exynos: Fix wrong label for USB 3.0 controller node
arm64: dts: exynos: Remove the OF graph from DSI node
This patch adds the IOMMU node for the IOMMU that resides on the
Qualcomm MSM8916 platforms.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds the Qualcomm Venus video codec node for the video
codec hardware residing on MSM8916 platforms.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch is to add watchdog binding for Hi3660 on Hikey960 board.
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Zhong Kaihua <zhongkaihua@huawei.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch reserves some memory in the DTS and sets up a
pstore device tree node to enable pstore support on HiKey960.
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add support to hikey960 dts for the syscon-reboot-mode driver.
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are two clusters on the Hi3660, the first one is Cortex-A53 based
and the other one is Cortex-A73 based. These two clusters have different
idle states.
Thanks to Daniel Lezcano's recent changes, the generic ARM cpuidle
driver can now support several clusters with different idle states, thus
supporting the big.Little architecture.
In addition to the WFI idle state which is the default shallowest state
for all ARM cpus, the Hi3660 supports the following states:
- CA53 CPUs:
- CPU_SLEEP: CPU power off state
- CLUSTER_SLEEP_0: Cluster power off state
- CA73 CPUs:
- CPU_NAP: CPU retention state
- CPU_SLEEP: CPU power off state
- CLUSTER_SLEEP_1: Cluster power off state
This patch adds the idle states description for the Hi3660 to the device
tree.
Cc: Kevin Wang <jean.wangtao@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch adds the Qualcomm Adreno GPU node that exists in the
MSM8916.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
NanoPi A64 is a new board of high performance with low cost
designed by FriendlyElec., using the Allwinner A64 SOC.
Nanopi A64 features
- Allwinner A64, 64-bit Quad-core Cortex-A53@648MHz to 1.152GHz, DVFS
- 1GB DDR3 RAM
- MicroSD
- Gigabit Ethernet (RTL8211E)
- Wi-Fi 802.11b/g/n
- IR receiver
- Audio In/Out
- Video In/Out
- Serial Debug Port
- microUSB 5V 2A DC power-supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Enable USB host on Armada-8040-DB by adding USB PHY nodes for the
following ports:
- host 0 and 1 of CPM
- host 0 of CPS
These PHY are enabled by lanes coming from regulators based on two
I2C expanders.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add I2C expander and USB host PHY (host 0 and host 1) to enable
USB VBUS on USB ports of type A on Armada-7040-DB.
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The NAND controller used in A7K/A8K is present on the CP110. It is
compatible with the pxa-nand driver.
However, due to the limiation of the pins available this controller is
only usable on the CPM for A7K and on the CPS for A8K.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add one PCIe host controller node for HiSilicon Hip07 SoC and enable it in
D05 board.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It adds the initial zx296718-pcbox board support with devices like
storage, audio and VGA output enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
It enables the I2S sound card support, which is used to drive audio
through aud96p22 codec in case of TV output.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Instead of simple-audio-card, audio-graph-card is recommended for audio
bindings. Let's change to it, so that the HDMI/SPDIF audio card can
align with the new I2S/Codec card which will be added later.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
We will enable PWM device to control voltage through pwm-regulator
support. So let's add voltage data into OPP table.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The default I2S0 parent clock AUDIO_24M can not be divided into required
sample rate in some cases, for example when 48KHz is needed. Change the
parent clock to AUDIO_99M which works for most sample rates.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
