For some reason global GFM_MASK ended up with bit 1 instead of bit 0.
Remove the global GFM_MASK and reuse mux_mask field.
Fixes: a2d8f50780 ("clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119113851.18946-1-srinivas.kandagatla@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a driver for the SDX55 APCS clock controller. It is part of the APCS
hardware block, which among other things implements also a combined mux
and half integer divider functionality. The APCS clock controller has 3
parent clocks:
1. Board XO
2. Fixed rate GPLL0
3. A7 PLL
This is required for enabling CPU frequency scaling on SDX55-based
platforms.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118041156.50016-6-manivannan.sadhasivam@linaro.org
[sboyd@kernel.org: Fix unused ret in probe by hardcoding it]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for PLL found in Qualcomm SDX55 platforms which is used to
provide clock to the Cortex A7 CPU via a mux. This PLL can provide high
frequency clock to the CPU above 1GHz as compared to the other sources
like GPLL0.
In this driver, the power domain is attached to the cpudev. This is
required for CPUFreq functionality and there seems to be no better place
to do other than this driver (no dedicated CPUFreq driver).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210118041156.50016-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The workaround for Cortex-A76 erratum 1463225 is split across the
syscall and debug handlers in separate files. This structure currently
forces us to do some redundant work for debug exceptions from EL0, is a
little difficult to follow, and gets in the way of some future rework of
the exception entry code as it requires exceptions to be unmasked late
in the syscall handling path.
To simplify things, and as a preparatory step for future rework of
exception entry, this patch moves all the workaround logic into
entry-common.c. As the debug handler only needs to run for EL1 debug
exceptions, we no longer call it for EL0 debug exceptions, and no longer
need to check user_mode(regs) as this is always false. For clarity
cortex_a76_erratum_1463225_debug_handler() is changed to return bool.
In the SVC path, the workaround is applied earlier, but this should have
no functional impact as exceptions are still masked. In the debug path
we run the fixup before explicitly disabling preemption, but we will not
attempt to preempt before returning from the exception.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210202120341.28858-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix the following coccicheck warning:
drivers/memory/tegra/tegra186-emc.c:158:0-23: WARNING:
tegra186_emc_debug_max_rate_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE.
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612684970-125948-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Correct kerneldoc to fix W=1 warnings:
drivers/memory/samsung/exynos5422-dmc.c:290: warning:
expecting prototype for find_target_freq_id(). Prototype was for find_target_freq_idx() instead
drivers/memory/samsung/exynos5422-dmc.c:1015: warning:
expecting prototype for exynos5_dmc_align_initial_frequency(). Prototype was for exynos5_dmc_align_init_freq() instead
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210206111715.20774-1-krzk@kernel.org
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might be not relevant here). This
fixes compile warning (!CONFIG_OF with clang):
drivers/memory/ti-emif-pm.c:238:34: warning:
unused variable 'ti_emif_of_match' [-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210206111343.19273-1-krzk@kernel.org
Make functions used only in this module static to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:360:39: warning:
no previous prototype for ‘s3c24xx_handle_irq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1308:12: warning:
no previous prototype for ‘s3c2410_init_intc_of’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1330:12: warning:
no previous prototype for ‘s3c2416_init_intc_of’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-2-krzk@kernel.org
Include headers to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:389:5: warning:
no previous prototype for ‘s3c24xx_set_fiq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:683:13: warning:
no previous prototype for ‘s3c2410_init_irq’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-1-krzk@kernel.org
* add new mt7921e driver
* factor out common code shared between 7615/7663 and 7921
* performance optimizations
* 7915 dbdc fixes
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* bugfixes
* testmode support enhancements
* endian fixes
* 7915 txbf support
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - http://gpgtools.org
iEYEABECAAYFAmAURZcACgkQ130UHQKnbvX3xACePCxN0DX5vTv+4Z79sTpnc4ZY
acwAn2iE9ObgXOWlSx3+QTz8fM4f5vGd
=JCVv
-----END PGP SIGNATURE-----
Merge tag 'mt76-for-kvalo-2021-01-29' of https://github.com/nbd168/wireless
mt76 patches for 5.12
* add new mt7921e driver
* factor out common code shared between 7615/7663 and 7921
* performance optimizations
* 7915 dbdc fixes
* 802.11 encap offload support
* support for multiple pcie gen1 host interfaces on 7915
* 7915 testmode support
* bugfixes
* testmode support enhancements
* endian fixes
* 7915 txbf support
ODROID-HC4 is a derivative of the C4 with minor differences:
- 16MB XT25F128B SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-6-christianshewitt@gmail.com
Convert the ODROID-C4 dts to meson-sm1-odroid.dtsi and C4 board dts in
preparation for adding additional C4 family boards.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20210202021021.11068-4-christianshewitt@gmail.com
* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.
-----BEGIN PGP SIGNATURE-----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=c570
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches intended for v5.12
* Check FW notification sizes for robustness;
* Improvements in the NAPI implementation;
* Implement a workaround for CCA-EXT;
* Add new FW API support;
* Fix a CSA bug;
* Implement PHY integration version parsing;
* A bit of refactoring;
* One more CSA bug fix, this time in the AP side;
* Support for new So devices and a bit of reorg;
* Per Platform Antenna Gain (PPAG) fixes and improvements;
* Improvements in the debug framework;
* Some other clean-ups and small fixes.
# gpg: Signature made Fri 05 Feb 2021 12:04:21 PM EET using RSA key ID 1A3CC5FA
# gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>"
# gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
The kernel has 2 drivers for the Low Power Engine audio-block on
Bay- and Cherry-Trail SoCs. The old SST driver and the new SOF
driver. If both drivers are enabled then the kernel will default
to using the old SST driver, unless told otherwise through the
snd_intel_dspcfg.dsp_driver module-parameter.
Add a boolean SND_INTEL_BYT_PREFER_SOF Kconfig option, which when set to Y
will make the kernel default to the new SOF driver instead.
The option defaults to n, preserving the current behavior.
Making this configurable will help distributions such as Fedora:
https://fedoraproject.org/w/index.php?title=Changes/SofDefaultForIntelLpe
to test using SOF on BYT/CHT during the transition phase where we
have both drivers (eventually the old driver and this option will
be removed).
Note that this drops the acpi_config_table[] containing 2 entries per ACPI
hardware-id if both drivers are enabled. snd_intel_acpi_dsp_find_config()
will always return the first hit, so we only need a single entry with the
flags value set depending on the Kconfig settings.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210208135919.135600-1-hdegoede@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the page cache is invalid, then we can't do read-modify-write, so
ensure that we do clear it when we know it is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This cpupower update for Linux 5.12-rc1 consists of:
- Updates to the cpupower command to add support for AMD family 0x19
and cleanup the code to remove many of the family checks to make
future family updates easier.
- Adding Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially.
-----BEGIN PGP SIGNATURE-----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=pqCu
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility update for v5.12-rc1 from Shuah Khan:
"This cpupower update for Linux 5.12-rc1 consists of:
- Updates to the cpupower command to add support for AMD family 0x19
and cleanup the code to remove many of the family checks to make
future family updates easier.
- Adding Makefile dependencies for install targets to allow building
cpupower in parallel rather than serially."
* tag 'linux-cpupower-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Add cpuid cap flag for MSR_AMD_HWCR support
cpupower: Remove family arg to decode_pstates()
cpupower: Condense pstate enabled bit checks in decode_pstates()
cpupower: Update family checks when decoding HW pstates
cpupower: Remove unused pscur variable.
cpupower: Add CPUPOWER_CAP_AMD_HW_PSTATE cpuid caps flag
cpupower: Correct macro name for CPB caps flag
cpupower: Update msr_pstate union struct naming
cpupower: add Makefile dependencies for install targets
LVM doesn't like it when the target returns different values from what
was set in the constructor. Fix dm-writecache so that the returned
table values are exactly the same as requested values.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we're doing a write, and the entire page lies beyond the end-of-file,
then we can assume the write can be extended to cover the beginning of
the page, since we know the data in that region will be all zeros.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Graph Compiler uses DMA5 in a non-standard way and it requires the
driver to disable clock gating on that DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.
Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
driver should use ECC info from FW only if HBM ECC CAP is set.
otherwise, try to fetch the data from MC regs only if security is
disabled.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We don't want to ask for the ACL in a WRITE reply, since we don't have
a preallocated buffer.
Instead of checking NFS_INO_INVALID_ACCESS, which is really about
managing the access cache, we should look at the value of
NFS_INO_INVALID_OTHER. Also ensure we assign the mode, owner and
owner_group flags to the correct bit mask.
Finally, fix up the check for NFS_INO_INVALID_CTIME to retrieve the
ctime, and add a check for NFS_INO_INVALID_CHANGE.
Fixes: 76bd5c016e ("NFSv4: make cache consistency bitmask dynamic")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The only usage of it is to assign its address to the ops field in the
regulator_desc struct, which is a pointer to const struct regulator_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20210206232152.58046-1-rikard.falkeborn@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some Surface Book 2 and 3 models have a discrete GPU (dGPU) that is
hot-pluggable. On those devices, the dGPU is contained in the base,
which can be separated from the tablet part (containing CPU and
touchscreen) while the device is running.
It (in general) is presented as/behaves like a standard PCIe hot-plug
capable device, however, this device can also be put into D3cold. In
D3cold, the device itself is turned off and can thus not submit any
standard PCIe hot-plug events. To properly detect hot-(un)plugging while
the dGPU is in D3cold, out-of-band signaling is required. Without this,
the device state will only get updated during the next bus-check, eg.
via a manually issued lspci call.
This commit adds a driver to handle out-of-band PCIe hot-(un)plug events
on Microsoft Surface devices. On those devices, said events can be
detected via GPIO interrupts, which are then forwarded to the
corresponding ACPI DSM calls by this driver. The DSM then takes care of
issuing the appropriate bus-/device-check, causing the PCI core to
properly pick up the device change.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210205012657.1951753-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmAd1GIQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVktB/9L6zZzqTK7IIPn9XLXVYEP8Am6+nfsK1pZ
YGE5xrOaLhE3t5Kpq202xBDBkBId0poU5o6TW+QZHnSbS2uUEh88RpqE0O/Ozagz
cES+owdGcF+rPaRzghD91ESyumH9ys2rEoy8PFxl6BeHPggGwTRlCeCu2UPaUqbz
pxdoT6ySkc61Waf1K8dMgMl4Up3Tkx2u8kMSxvsru3GoO7K+43nB/6WyTsfD/y2b
q1gZUN2x9/HHFjPH76AFVVJ97DU7KtW3z9X4utn41uxSGspQWJXp/6Y5FbdahMRp
dEvy4AyAMMuzkgQgmlpmGKSpk9ZKPKuRb9n2DKTJWwia94SHEbqx
=0bTQ
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/defconfig
Enable REGULATOR_MP8859 - the main power supply for one Rockchip board.
* tag 'v5.12-rockchip-defconfig64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: defconfig: Enable REGULATOR_MP8859
Link: https://lore.kernel.org/r/4622596.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of encoding of the bvec pool using magic bio flags, just use
a helper to find the pool based on the max_vecs value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A bio allocated by bio_alloc_bioset comes pre-zeroed, no need to
clear random fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_iov_bvec_set clones the bio_vecs from the iter, and thus should be
treated like a cloned bio in every respect. That also includes not
touching bi_max_vecs as that is a property of the bio allocation and not
its current payload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_iov_bvec_set assigns the foreign bvec, so setting the NO_PAGE_REF
directly there seems like the best fit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove a pointless layer of indentation after a return statement.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bi_max_vecs and bi_vcnt fields are defined as unsigned short, so
don't allow passing larger values in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All bios with up to 4 bvecs use the inline bvecs in the bio itself, so
don't bother to define bvec_slabs entries for them. Also decruftify
the bvec_slabs definition and initialization while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid the pointless goto by trying the slab allocation first and falling
through to the mempool.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Clean up bvec_alloc a little by factoring out a helper for the gfp_t
manipulations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct biovec_slab is only used inside of bio.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bvec_alloc always uses biovec_slabs, and thus always needs to use the
same number of inline vecs. Share a single definition for the data
and integrity bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For SQPOLL rings tctx_inflight() always returns zero, so it might skip
doing full cancelation. It's fine because we jam all sqpoll submissions
in any case and do go through files cancel for them, but not nice.
Do the intended full cancellation, by mimicking __io_uring_task_cancel()
waiting but impersonating SQPOLL task.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
-----BEGIN PGP SIGNATURE-----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=GYHk
-----END PGP SIGNATURE-----
Merge tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.12, part 2:
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
* tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
Link: https://lore.kernel.org/r/20210208115753.54730-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a new ASoc Machine driver for Intel Baytrail platforms with a
Wolfson Microelectronics WM5102 codec.
This is based on a past contributions [1] from Paulo Sergio Travaglia
<pstglia@gmail.com> based on the Levono kernel [2] combined with
insights in things like the speaker GPIO from the android-x86 android
port for the Lenovo Yoga Tablet 2 1051F/L [3].
[1] https://patchwork.kernel.org/project/alsa-devel/patch/593313f5.3636c80a.50e05.47e9@mx.google.com/
[2] https://github.com/lenovo-yt2-dev/android_kernel_lenovo_baytrail/blob/cm-12.1/sound/soc/intel/board/byt_bl_wm5102.c
[3] https://github.com/Kitsune2222/Android_Yoga_Tablet_2-1051F_Kernel
The original machine driver from the Android ports was a crude modified
copy of bytcr_rt5640.c adjusted to work with the WM5102 codec.
This version has been extensively reworked to:
1. Remove all rt5640 related quirk handling. to the best of my knowledge
this setup is only used on the Lenovo Yoga Tablet 2 series (8, 10 and 13
inch models) which all use the same setup. So there is no need to deal
with all the variations with which we need to deal on rt5640 boards.
2. Rework clock handling, properly turn off the FLL and the platform-clock
when they are no longer necessary and don't reconfigure the FLL
unnecessarily when it is already running. This fixes a number of:
"Timed out waiting for lock" warnings being logged.
3. Add the GPIO controlled Speaker-VDD regulator as a DAPM_SUPPLY
This only adds the machine driver and ACPI hooks, the BYT-CR detection
quirk which these devices need will be added in a separate patch.
BugLink: https://github.com/thesofproject/linux/issues/2485
Co-authored-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210120214957.140232-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Bay Trail systems:
1. Use a non CR version of the Bay Trail SoC
2. Contain at least 6 interrupt resources so that the
platform_get_resource(pdev, IORESOURCE_IRQ, 5) check to workaround
non CR systems which list their IPC IRQ at index 0 despite being
non CR does not work
3. Despite 1. and 2. still have their IPC IRQ at index 0 rather then 5
Add a DMI quirk table to check for the few known models with this issue,
so that the right IPC IRQ index is used on these systems.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210120214957.140232-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the ingenic,jz4760b-codec and ingenic,jz4760-codec compatible
strings.
In the process, convert the previous compatible strings to use an enum
instead.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-1-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the internal codec found in the JZ4760 SoC from Ingenic.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210123140958.12895-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
