(1) During running time of a a VM with numbers of vCPUs, if some vCPUs
access the same GPA almost at the same time and the stage-2 mapping of
the GPA has not been built yet, as a result they will all cause
translation faults. The first vCPU builds the mapping, and the followed
ones end up updating the valid leaf PTE. Note that these vCPUs might
want different access permissions (RO, RW, RX, RWX, etc.).
(2) It's inevitable that we sometimes will update an existing valid leaf
PTE in the map path, and we perform break-before-make in this case.
Then more unnecessary translation faults could be caused if the
*break stage* of BBM is just catched by other vCPUS.
With (1) and (2), something unsatisfactory could happen: vCPU A causes
a translation fault and builds the mapping with RW permissions, vCPU B
then update the valid leaf PTE with break-before-make and permissions
are updated back to RO. Besides, *break stage* of BBM may trigger more
translation faults. Finally, some useless small loops could occur.
We can make some optimization to solve above problems: When we need to
update a valid leaf PTE in the map path, let's filter out the case where
this update only change access permissions, and don't update the valid
leaf PTE here in this case. Instead, let the vCPU enter back the guest
and it will exit next time to go through the relax_perms path without
break-before-make if it still wants more permissions.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-3-wangyanan55@huawei.com
Procedures of hyp stage-1 map and guest stage-2 map are quite different,
but they are tied closely by function kvm_set_valid_leaf_pte().
So adjust the relative code for ease of code maintenance in the future.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-2-wangyanan55@huawei.com
Drop the const qualifier from the static global cur_profile
pointer declaration.
This is a preparation patch for passing the cur_profile pointer as
parameter to the profile_get() and profile_set() callbacks so that
drivers dynamically allocating their driver-data struct, with their
platform_profile_handler struct embedded, can use this pointer to
get to their driver-data.
Note this also requires dropping the const from the pprof
platform_profile_register() function argument. Dropping this
const is not a problem, non of the queued up consumers of
platform_profile_register() actually pass in a const pointer.
Link: https://lore.kernel.org/linux-acpi/5e7a4d87-52ef-e487-9cc2-8e7094beaa08@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-2-jiaxun.yang@flygoat.com
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ hdegoede@redhat.com: Also remove const from platform_profile_register() ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Our intention was to only remove path kobjects whenever a device is
being set offline. However, one corner case was missing.
If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and
BIODASDENABLE respectively), the enabling process will call
dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in
order to update path information. During that update,
dasd_eckd_clear_conf_data() clears all old data and also removes all
kobjects. This will leave us with an inconsistent state of path kobjects
and a subsequent path verification leads to a failing kobject creation.
Fix this by removing kobjects only in the context of offlining a device
as initially intended.
Fixes: 19508b2047 ("s390/dasd: Display FC Endpoint Security information via sysfs")
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
The arguments for __do_hyp_init are now passed with a pointer to a
struct which means there are scratch registers available for use. Thanks
to this, we no longer need to use clever, but hard to read, tricks that
avoid the need for scratch registers when checking for the
__kvm_hyp_init HVC.
Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-2-ascull@google.com
Commit 8765c5ba19 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The block layer spends quite a while in blkdev_direct_IO() to copy and
initialise bio's bvec. However, if we've already got a bvec in the input
iterator it might be reused in some cases, i.e. when new
ITER_BVEC_FLAG_FIXED flag is set. Simple tests show considerable
performance boost, and it also reduces memory footprint.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper function calculating the number of bvec segments we need to
allocate to construct a bio. It doesn't change anything functionally,
but will be used to not duplicate special cases in the future.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iov_iter_advance() is heavily used, but implemented through generic
means. For bvecs there is a specifically crafted function for that, so
use bvec_iter_advance() instead, it's faster and slimmer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This saves one memory allocation, and ensures the bvecs aren't freed
before the AIO completion. This will allow the lower level code to be
optimized so that it can avoid allocating another bvec array.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Direct IO does not operate on the current working set of pages managed
by the kernel, so it should not be accounted as memory stall to PSI
infrastructure.
The block layer and iomap direct IO use bio_iov_iter_get_pages()
to build bios, and they are the only users of it, so to avoid PSI
tracking for them clear out BIO_WORKINGSET flag. Do same for
dio_bio_submit() because fs/direct_io constructs bios by hand directly
calling bio_add_page().
Reported-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
zero-length bvec segments are allowed in general, but not handled by bio
and down the block layer so filtered out. This inconsistency may be
confusing and prevent from optimisations. As zero-length segments are
useless and places that were generating them are patched, declare them
not allowed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
iter_file_splice_write() may spawn bvec segments with zero-length. In
preparation for prohibiting them, filter out by hand at splice level.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
arm_smccc_1_1_hvc() only adds write contraints for x0-3 in the inline
assembly for the HVC instruction so make sure those are the only
registers that change when __do_hyp_init is called.
Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-3-ascull@google.com
Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.
Fixes: 3e13fa1e1f ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This adds logic to disable and reenable advertisement filters during
suspend and resume. After this patch, we would only receive packets from
devices in allow list during suspend.
Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When MSFT extension is supported, we don't have to interleave the scan
as we could just do allowlist scan.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Implements the feature to disable/enable the filter used for
advertising monitor on MSFT controller, effectively have the same
effect as "remove all monitors" and "add all previously removed
monitors".
This feature would be needed when suspending, where we would not want
to get packets from anything outside the allowlist. Note that the
integration with the suspending part is not included in this patch.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When the controller is powered off, the registered advertising monitor
is removed from the controller. This patch handles the re-registration
of those monitors when the power is on.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enables advertising monitor offloading to the controller, if MSFT
extension is supported. The kernel won't adjust the monitor parameters
to match what the controller supports - that is the user space's
responsibility.
This patch only manages the addition of monitors. Monitor removal is
going to be handled by another patch.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
MSFT needs rssi parameter for monitoring advertisement packet,
therefore we should supply them from mgmt. This adds a new opcode
to add advertisement monitor with rssi parameters.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We have already WARN_ON(!qc) for non-QOS frame on txq->sched_retry path,
but we continue to process, what makes no sense since tid is not
initialized. Non QOS frame should never happen when aggregation
is enabled on queue, so do not process that.
Patch should fix smatch warning:
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2822 il4965_hdl_tx() error: uninitialized symbol 'tid'.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210119100621.439134-1-stf_xl@wp.pl
We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:
wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])
Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.
This quirk got added with commit 18eab43070 ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.
As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074e
("wl12xx: increase minimum singlerole firmware version required").
If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.
With this fix wlcore reconnects properly after a beacon loss.
Cc: Raz Bouganim <r-bouganim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
The LTR mechanism enables PCIE Endpoints to report the service latency
requirements and CPU will enter appropriate sleep state to save power
based on the LTR value.
8723de provides two registers to config the LTR, and the original setting
is too short for CPU to ente sleep state. The patch adjust the LTR setting.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210113014342.3615-1-pkshih@realtek.com
I think this unusual use of struct compound_state could cause confusion.
It's not that much more complicated just to open-code this stateid
lookup.
The only change in behavior should be a different error return in the
case the copy is using a source stateid that is a revoked delegation,
but I doubt that matters.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: squashed in fix reported by Coverity ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I think this is a better name, and I'm going to reuse elsewhere the code
that does the lookup itself.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
You can take the single-exit thing too far, I think.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Similarly, this STALE_CLIENTID check is already handled by:
nfs4_preprocess_confirmed_seqid_op()->
nfs4_preprocess_seqid_op()->
nfsd4_lookup_stateid()->
set_client()->
STALE_CLIENTID()
(This may cause it to return a different error in some cases where
there are multiple things wrong; pynfs test SEQ10 regressed on this
commit because of that, but I think that's the test's fault, and I've
fixed it separately.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This STALE_CLIENTID check is redundant with the one in
lookup_clientid().
There's a difference in behavior is in case of memory allocation
failure, which I think isn't a big deal.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The Receive completion handler doesn't look at the contents of the
Receive buffer. The DMA sync isn't terribly expensive but it's one
less thing that needs to be done by the Receive completion handler,
which is single-threaded (per svc_xprt). This helps scalability.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is similar to commit e340c2d6ef ("xprtrdma: Reduce the
doorbell rate (Receive)") which added Receive batching to the
client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up. We are not permitted to remove old proc files. Instead,
convert these variables to stubs that are only ever allowed to
display a value of zero.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that we have an efficient mechanism to update these two stats,
let's start maintaining them again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Receives are frequent events. Avoid the overhead of a memory bus
lock cycle for counting a value that is hardly every used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Collect some nfsd stats per export in addition to the global stats.
A new nfsdfs export_stats file is created. It uses the same ops as the
exports file to iterate the export entries and we use the file's name to
determine the reported info per export. For example:
$ cat /proc/fs/nfsd/export_stats
# Version 1.1
# Path Client Start-time
# Stats
/test localhost 92
fh_stale: 0
io_read: 9
io_write: 1
Every export entry reports the start time when stats collection
started, so stats collecting scripts can know if stats where reset
between samples.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd stats counters can be updated by concurrent nfsd threads without any
protection.
Convert some nfsd_stats and nfsd_net struct members to use percpu counters.
The longest_chain* members of struct nfsd_net remain unprotected.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 501cb1849f ("nfsd: rip out the raparms cache") removed the
code that updates read-ahead cache stats counters,
commit 8bbfa9f388 ("knfsd: remove the nfsd thread busy histogram")
removed code that updates the thread busy stats counters back in 2009
and code that updated filehandle cache stats was removed back in 2002.
Remove the unused stats counters from nfsd_stats struct and print
hardcoded zeros in /proc/net/rpc/nfsd.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
