Richard reports that the following test:
(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
done) &
while true; do
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
done
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
done
done
...fails with a crash signature like:
divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
[..]
Call Trace:
available_slots_show+0x4e/0x120 [libnvdimm]
dev_attr_show+0x42/0x80
? memset+0x20/0x40
sysfs_kf_seq_show+0x218/0x410
The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.
Validate driver-data under the device-lock.
Fixes: 4d88a97aa9 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The kernel build system as a whole is dropping support for Python 2, so we
should do the same. The effects are rather small, especially considering
that much of the deleted code was not doing anything under any version of
Python anyway.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As promised, drop support for some ancient sphinx releases, along with a
lot of the cruft that was required to make that support work.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct i3c_driver::remove() return
void, too. This makes it obvious that returning an error code is
a bad idea and future driver authors cannot get that wrong.
Up to now there are no drivers with a remove callback, so there is no
need to adapt drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210128091048.17006-2-u.kleine-koenig@pengutronix.de
A registered driver without a probe callback doesn't make sense, so
refuse to register such a driver. (Otherwise i3c_device_probe() yields a
NULL pointer exception.)
A driver without remove is possible, e.g. when all resources are freed
using devm callbacks. So guard the call to driver->remove by a check
for being non-NULL.
Note that the only in-tree i3c driver
(drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c) doesn't have a remove
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210128091048.17006-1-u.kleine-koenig@pengutronix.de
The MIPI i3c HCI driver makes use of IOMEM functions like
devm_platform_ioremap_resource(), which are only available if
CONFIG_HAS_IOMEM is defined.
This causes the driver to be enabled under make ARCH=um allyesconfig,
even though it won't build.
By adding a dependency on HAS_IOMEM, the driver will not be enabled on
architectures which don't support it.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210127040636.1535722-1-davidgow@google.com
These variables will be explicitly assigned before use,
so there is no need to initialize.
Signed-off-by: Liu Song <liu.song11@zte.com.cn>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Occasionally, quota data may be corrupted detected by fsck:
Info: checkpoint state = 45 : crc compacted_summary unmount
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1543036928, 762) != expected (1543032832, 762)
[ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found.
[QUOTA WARNING] Usage inconsistent for ID 0:actual (1352478720, 344) != expected (1352474624, 344)
[ASSERT] (fsck_chk_quota_files:1986) --> Quota file is missing or invalid quota file content found.
[FSCK] Unreachable nat entries [Ok..] [0x0]
[FSCK] SIT valid block bitmap checking [Ok..]
[FSCK] Hard link checking for regular file [Ok..] [0x0]
[FSCK] valid_block_count matching with CP [Ok..] [0xdf299]
[FSCK] valid_node_count matcing with CP (de lookup) [Ok..] [0x2b01]
[FSCK] valid_node_count matcing with CP (nat lookup) [Ok..] [0x2b01]
[FSCK] valid_inode_count matched with CP [Ok..] [0x2665]
[FSCK] free segment_count matched with CP [Ok..] [0xcb04]
[FSCK] next block offset is free [Ok..]
[FSCK] fixing SIT types
[FSCK] other corrupted bugs [Fail]
The root cause is:
If we open file w/ readonly flag, disk quota info won't be initialized
for this file, however, following mmap() will force to convert inline
inode via f2fs_convert_inline_inode(), which may increase block usage
for this inode w/o updating quota data, it causes inconsistent disk quota
info.
The issue will happen in following stack:
open(file, O_RDONLY)
mmap(file)
- f2fs_convert_inline_inode
- f2fs_convert_inline_page
- f2fs_reserve_block
- f2fs_reserve_new_block
- f2fs_reserve_new_blocks
- f2fs_i_blocks_write
- dquot_claim_block
inode->i_blocks increase, but the dqb_curspace keep the size for the dquots
is NULL.
To fix this issue, let's call dquot_initialize() anyway in both
f2fs_truncate() and f2fs_convert_inline_inode() functions to avoid potential
inconsistent quota data issue.
Fixes: 0abd675e97 ("f2fs: support plain user/group quota")
Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com>
Signed-off-by: Dehe Gu <gudehe@huawei.com>
Signed-off-by: Junchao Jiang <jiangjunchao1@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Signed-off-by: Yi Chen <chenyi77@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During checkpoint=disable period, f2fs bypasses all the synchronous IOs such as
sync and fsync. So, when enabling it back, we must flush all of them in order
to keep the data persistent. Otherwise, suddern power-cut right after enabling
checkpoint will cause data loss.
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Only the Layerscape SoCs have interrupts on bus idle, which facilitate
sending events which complete slave bus transactions.
Add support for synthesizing missing events. If we see a master request,
or a newly addressed slave request, if the last event sent to the backend
was I2C_SLAVE_READ_REQUESTED, send the backend a I2C_SLAVE_READ_PROCESSED
followed by I2C_SLAVE_STOP. For all other events, send an I2C_SLAVE_STOP.
Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback to i2c driver to stop on-going transfer
and unmap DMA mappings during system "reboot" or "shutdown".
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To save power, gate the clock when the bus is inactive, during system
sleep, and during shutdown. On some platforms, specifically Allwinner
A13/A20, gating the clock implicitly resets the module as well. Since
the module already needs to be reset after some suspend/resume cycles,
it is simple enough to reset it during every runtime suspend/resume.
Because the bus may be used by wakeup source IRQ threads, it needs to
be functional as soon as IRQs are enabled. Thus, its system PM hooks
need to run in the noirq phase.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Ondrej Jirman <megous@megous.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use pci_{info,warn,err,dbg} functions of the kernel's PCI API.
Remove unnecessary ndev_pdev(), ndev_name() and ndev_dev() macros.
While at it, remove useless __func__ from logging.
Signed-off-by: Richard Neumann <mail@richard-neumann.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move out header file from include/linux/platform_data/x86/ to
include/linux/platform_data/, since it does not depend on x86
architecture.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit 2ad1274fa3
VF queues were not brought up when PF was brought up after being
downed if the VF driver disabled VFs queues during PF down.
This could happen in some older or external VF driver implementations.
The problem was that PF driver used vf->queues_enabled as a condition
to decide what link-state it would send out which caused the issue.
Remove the check for vf->queues_enabled in the VF link notify.
Now VF will always be notified of the current link status.
Also remove the queues_enabled member from i40e_vf structure as it is
not used anymore. Otherwise VNF implementation was broken and caused
a link flap.
The original commit was a workaround to avoid breaking existing VFs though
it's really a fault of the VF code not the PF. The commit should be safe to
revert as all of the VFs we know of have been fixed. Also, since we now
know there is a related bug in the workaround, removing it is preferred.
Fixes: 2ad1274fa3 ("i40e: don't report link up for a VF who hasn't enabled")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Zdev static functions do not use vdev argument. Remove it.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The pci user accessors return negative errno's on error.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[aw: drop Fixes tag, pcibios_err_to_errno() behaves correctly for -errno]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
With this counter, we never need to traverse all groups to update
pinned_scope of vfio_iommu.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_sanity_check_pfn_list() is used to check whether pfn_list and
notifier are empty when remove the external domain, so it makes a
wrong assumption that only external domain will use the pinning
interface.
Now we apply the pfn_list check when a vfio_dma is removed and apply
the notifier check when all domains are removed.
Fixes: a54eb55045 ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If a group with non-pinned-page dirty scope is detached with dirty
logging enabled, we should fully populate the dirty bitmaps at the
time it's removed since we don't know the extent of its previous DMA,
nor will the group be present to trigger the full bitmap when the user
retrieves the dirty bitmap.
Fixes: d6a4c18566 ("vfio iommu: Implementation of ioctl for dirty pages tracking")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add Alder Lake mobile processor to CPU list to enumerate and enable the
split lock feature.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20210201190007.4031869-1-fenghua.yu@intel.com
Block translation of host virtual address while an iova range has an
invalid vaddr.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement a notify callback that remembers if the container's file
descriptor has been closed.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define a vfio_iommu_driver_ops notify callback, for sending events to
the driver. Drivers are not required to provide the callback, and
may ignore any events. The handling of events is driver specific.
Define the CONTAINER_CLOSE event, called when the container's file
descriptor is closed. This event signifies that no further state changes
will occur via container ioctl's.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement VFIO_DMA_UNMAP_FLAG_VADDR, VFIO_DMA_MAP_FLAG_VADDR, and
VFIO_UPDATE_VADDR. This is a partial implementation. Blocking is
added in a subsequent patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Modify the iteration in vfio_dma_do_unmap so it does not depend on deletion
of each dma entry. Add a variant of vfio_find_dma that returns the entry
with the lowest iova in the search range to initialize the iteration. No
externally visible change, but this behavior is needed in the subsequent
update-vaddr patch.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Define interfaces that allow the underlying memory object of an iova
range to be mapped to a new host virtual address in the host process:
- VFIO_DMA_UNMAP_FLAG_VADDR for VFIO_IOMMU_UNMAP_DMA
- VFIO_DMA_MAP_FLAG_VADDR flag for VFIO_IOMMU_MAP_DMA
- VFIO_UPDATE_VADDR extension for VFIO_CHECK_EXTENSION
Unmap vaddr invalidates the host virtual address in an iova range, and
blocks vfio translation of host virtual addresses. DMA to already-mapped
pages continues. Map vaddr updates the base VA and resumes translation.
See comments in uapi/linux/vfio.h for more details.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Minor changes in vfio_dma_do_unmap to improve readability, which also
simplify the subsequent unmap-all patch. No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For the UNMAP_DMA ioctl, delete all mappings if VFIO_DMA_UNMAP_FLAG_ALL
is set. Define the corresponding VFIO_UNMAP_ALL extension.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
do_read() returning 0 bytes read (not -EAGAIN/etc.) is not an important
enough of a case to prioritise it. Fold it into ret < 0 check, so we get
rid of an extra if and make it a bit more readable.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't know for how long REQ_F_INFLIGHT is going to stay, cleaner to
extract a helper for marking requests as so.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shouldn't be a problem now, but it's better to clean
REQ_F_WORK_INITIALIZED and work->flags only after relevant resources are
killed, so cancellation see them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->files now have same lifetime as all other iowq-work resources,
inline io_req_drop_files() for consistency. Moreover, since
REQ_F_INFLIGHT is no more files specific, the function name became
very confusing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have no request types left using needs_file_no_error, remove it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove asm/fixmap.h which is included more than once.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong Liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARM has recently supported KASAN, so I think that it's time to add
KASAN regions for PTDUMP on ARM.
This patch has been tested with QEMU + vexpress-a15. Both
CONFIG_ARM_LPAE and no CONFIG_ARM_LPAE.
The result after patching looks like this:
---[ Kasan shadow start ]---
0x6ee00000-0x7af00000 193M RW NX SHD MEM/CACHED/WBWA
0x7b000000-0x7f000000 64M ro NX SHD MEM/CACHED/WBWA
---[ Kasan shadow end ]---
---[ Modules ]---
---[ Kernel Mapping ]---
......
---[ vmalloc() Area ]---
......
---[ vmalloc() End ]---
---[ Fixmap Area ]---
---[ Vectors ]---
......
---[ Vectors End ]---
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Signed-off-by: Hailong liu <carver4lio@163.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The vdso linker script is prepocessed on demand. Adding it to 'targets'
is enough, and line 13 of this Makefile does that. This extra-y addition
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently ARCH_HAVE_NMI_SAFE_CMPXCHG is not set on Arm systems and this
makes it impossible to enable features such as ftrace histogram triggers
on Arm platforms.
Most Arm systems are NMI safe simply because there is no NMI but this isn't
universally true meaning we cannot set ARCH_HAVE_NMI_SAFE_CMPXCHG for all
Arm devices. However the load/store exclusive implementation of cmpxchg is
NMI-safe and this implementation is used ARMv6k and later. Let's select
ARCH_HAVE_NMI_SAFE_CMPXCHG for these systems.
Note that ARMv6 uses load/store exclusive for 32-bit cmpxchg but relies on
interrupt masking for 8- and 16-bit operations. This patch is conservative
and does not change behaviour for CPU_V6.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The driver core ignores the return value of struct bus_type::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct locomo_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.
Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sa1111_driver::remove return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea and ensures future
users behave accordingly.
Link: https://lore.kernel.org/r/20201126114724.2028511-1-u.kleine-koenig@pengutronix.de
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Not used anymore after refactoring:
arch/arm/kernel/smp.c: In function ‘show_ipi_list’:
arch/arm/kernel/smp.c:543:16: warning: variable ‘irq’ set but not used [-Wunused-but-set-variable]
543 | unsigned int irq;
Fixes: 88c637748e ("ARM: smp: Use irq_desc_kstat_cpu() in show_ipi_list()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
It was observed that decompressor running on hardware implementing ARM v8.2
Load/Store Multiple Atomicity and Ordering Control (LSMAOC), say, as guest,
would stuck just after:
Uncompressing Linux... done, booting the kernel.
The reason is that it clears nTLSMD bit when disabling caches:
nTLSMD, bit [3]
When ARMv8.2-LSMAOC is implemented:
No Trap Load Multiple and Store Multiple to
Device-nGRE/Device-nGnRE/Device-nGnRnE memory.
0b0 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are trapped and
generate a stage 1 Alignment fault.
0b1 All memory accesses by A32 and T32 Load Multiple and Store
Multiple at EL1 or EL0 that are marked at stage 1 as
Device-nGRE/Device-nGnRE/Device-nGnRnE memory are not trapped.
This bit is permitted to be cached in a TLB.
This field resets to 1.
Otherwise:
Reserved, RES1
So as effect we start getting traps we are not quite ready for.
Looking into history it seems that mask used for SCTLR clear came from
the similar code for ARMv4, where bit[3] is the enable/disable bit for
the write buffer. That not applicable to ARMv7 and onwards, so retire
that bit from the masks.
Fixes: 7d09e85448 ("[ARM] 4393/2: ARMv7: Add uncompressing code for the new CPU Id format")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently, the start address of physical memory is obtained by masking
the program counter with a fixed mask of 0xf8000000. This mask value
was chosen as a balance between the requirements of different platforms.
However, this does require that the start address of physical memory is
a multiple of 128 MiB, precluding booting Linux on platforms where this
requirement is not fulfilled.
Fix this limitation by validating the masked address against the memory
information in the passed DTB. Only use the start address
from DTB when masking would yield an out-of-range address, prefer the
traditional method in all other cases. Note that this applies only to the
explicitly passed DTB on modern systems, and not to a DTB appended to
the kernel, or to ATAGS. The appended DTB may need to be augmented by
information from ATAGS, which may need to rely on knowledge of the start
address of physical memory itself.
This allows to boot Linux on r7s9210/rza2mevb using the 64 MiB of SDRAM
on the RZA2MEVB sub board, which is located at 0x0C000000 (CS3 space),
i.e. not at a multiple of 128 MiB.
Suggested-by: Nicolas Pitre <nico@fluxnic.net>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The build robots have discovered that uncompress debugging
and semihosting does not play well together.
This is due to many factors but in general semihosting
debug needs to be rewritten to work the same way as any
LL_DEBUG, e.g. with a header in
arch/arm/include/debug/semihosting.S
This is a long term solution and needs testing on real
hardware and/or software models using semihosting.
For now disable uncompress debugging under semihosting.
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a2MyLnULmUr4zgzkiWPiYfp+Xs8ruz9_q-PugVf_9DCCw@mail.gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add the entry for the STiH418 SBC UART0 low level uart.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
