An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.
Fixes: c0071c7aa5 ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This driver currently rewrites bus_flags based solely on the value of
DT property 'data-mirror' and ignores bus_flags which might have been
set in DT panel-timing node. Specificaly, the 'de-active' DT property
sets DRM_BUS_FLAG_DE_ bus_flags.
Since of_get_drm_panel_display_mode() conveniently parses the bus_flags
out of DT panel-timing property, just ORR them with bus_flags inferred
from 'data-mirror' DT property and use the result as panel bus_flags.
This fixes handling of panels with 'panel-timing { de-active = <1>; };'.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-2-marex@denx.de
The mode parsing is currently implemented in three steps:
of_get_display_timing() - DT panel-timing to struct display_timing
videomode_from_timing() - struct display_timing to struct videomode
drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode
Replace all that with simple of_get_drm_panel_display_mode() call,
which already populates struct drm_display_mode and then duplicate
that mode in panel_lvds_get_modes() each time, since the mode does
not change.
Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode()
out of panel-timing DT node, which is used in subsequent patch to fix
handling of 'de-active' DT property.
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401162154.295152-1-marex@denx.de
To make debugging easier, convert driver to regmap. Implement read and write
regmap tables for known registers, keep all known register readable and mark
those which are obviously read-only as not writeable.
Use common I2C regmap for the I2C configuration, implement custom regmap bus
for DSI configuration. The later is mandatory as this chip requires one extra
byte set to read access length between register address and data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220403171004.368464-1-marex@denx.de
Let's make sure FBC is always disabled when we start to take
over the hardware state.
I suspect this should never really happen, since the only time
when we really should be taking over with the display already
active is when the previous state was progammed by the BIOS,
which likely shouldn't use FBC. This could be driver init,
or S4 resume when the boot kernel doesn't load i915. But I
suppose no harm in keeping this code around for exra safety
since it's quite trivial.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-7-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
By the time intel_fbc_global_disable() gets called during driver
teardown we should have already disabled all the crtcs, so
no way FBC should be enabled at this point.
And I have no idea what the other user (i915_restore_display())
is even trying to achieve.
So let's just throw intel_fbc_global_disable() into the bin.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Don't issue a nuke from frontbuffer flush while a flip is pending.
This avoids the DSPADDR/DSPSURF rmw abuse from the pre-snb nuke
from racing with the DSPADDR/DSPSURF write being performed by
the flip/plane update. The flip itself will already cause the nuke
so a double nuke is redundant.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Not sure what the point of this fbc->possible_frontbuffer_bits is.
And especially don't see why it's returning all the bits when
fbc is not even enabled. So let's just get rid of this and only
say we are interested in the plane's frontbuffer bits when fbc
is actually enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315140001.1172-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Since the conversion to spi-mem, the driver advertised support for
various operations that cqspi_set_protocol() was never expected to handle
correctly - in particuar all non-DTR operations with command or address
buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as
cqspi_set_protocol() returns -EINVAL.
In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that
support such operations. As a minimal fix that can be backported to stable
kernels, simply disallow the unsupported operations again to avoid this
issue.
Fixes: a314f63677 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220406132832.199777-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.
Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel test robot reported a build failure:
or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'
... with the following build configuration:
CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m
The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.
The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.
Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:
1. The interface drivers' Kconfig symbols must have a value no greater
than the value of any subdriver Kconfig symbols.
2. The subdrivers should by default enable both interface drivers, since
most users probably want at least one of them; those interface
drivers can be explicitly disabled however.
What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.
Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: aac9400106 ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 7938f42181 ("dma-buf-map: Rename to iosys-map") already renamed
this file, but it got brought back by a merge.
Delete it for real this time.
Fixes: 30424ebae8 ("Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220411134404.524776-1-kherbst@redhat.com
Currently, the IO-links to the device being removed from topology,
are not cleared. As a result, there would be dangling links left in
the KFD topology. This patch aims to fix the following:
1. Cleanup all IO links to the device being removed.
2. Ensure that node numbering in sysfs and nodes proximity domain
values are consistent after the device is removed:
a. Adding a device and removing a GPU device are made mutually
exclusive.
b. The global proximity domain counter is no longer required to be
an atomic counter. A normal 32-bit counter can be used instead.
3. Update generation_count to let user-mode know that topology has
changed due to device removal.
CC: Shuotao Xu <shuotaoxu@microsoft.com>
Reviewed-by: Shuotao Xu <shuotaoxu@microsoft.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MS_HYPERV with vega10 doesn't have the interface to process
request init data msg.
Check hypervisor type to not send the request for MS_HYPERV.
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Alice Wong <shiwei.wong@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A MAX_GPU_INSTANCE bits bitmap will suffice.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Extract update stream allocation table into link hwss as part of the
link hwss refactor work.
Reviewed-by: George Shen <George.Shen@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
creating a generic helper for AMD specific PSR-SU sink validation.
Moving the function to the power module to reference it across all
OS.
[how]
- drop PSRSU specific sink validation helper and move to power
module by reading PSR version and other PSR caps
- call the new helper from linux DM (amdgpu_dm_psr)
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
As per eDP 1.5 spec, add the below two DPCD bit fields for PSR-SU
support and capability:
1. DP_PSR2_WITH_Y_COORD_ET_SUPPORTED
2. DP_PSR2_SU_AUX_FRAME_SYNC_NOT_NEEDED
changes in v2
------------------
* fixed the typo
* explicitly list what DPCD bit fields are added
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Intel Raptor Lake-S has the same SPI serial flash controller as Alder
Lake-P. Add Raptor Lake-S PCI ID to the driver list of supported
devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20220411112116.53281-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmJWb5kRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvaZQgAlgXICEUZSq711XeKLMZ5Rv6z532ejcmT
hrgL8Dzru8NEx/+tdPwX/uhdUAzkwk0C7QwkbpzifE1nrQaqMwVFlKr2q0K43qeJ
xZoHCiMdShsClBlK9a/jZsa5/fnHFF9Pa0rNxCHGjQ46gRhkkwzf6fv722z/Zay9
MOKOv9+17Vrtpel2GlaMPsxRSQmzM4YSAbSfIz6HiUwt4VkuB2x9qxalHz7OfD27
fatWhwK1ZJui1tPRsB7dfrE8/0sg0t3Z2d7GarraFMCsaiCZRffYWz1OWy6P5ITo
8x4kgIewiggXBzpcsa8LQ9cleOE0gLZUdihJHgjWma3YX/tnns5Akg==
=hTYE
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.18
First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some implementations were returning type `unsigned long`, while others
that fell back to get_cycles() were implicitly returning a `cycles_t` or
an untyped constant int literal. That makes for weird and confusing
code, and basically all code in the kernel already handled it like it
was an `unsigned long`. I recently tried to handle it as the largest
type it could be, a `cycles_t`, but doing so doesn't really help with
much.
Instead let's just make random_get_entropy() return an unsigned long all
the time. This also matches the commonly used `arch_get_random_long()`
function, so now RDRAND and RDTSC return the same sized integer, which
means one can fallback to the other more gracefully.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than failing entirely if a copy_to_user() fails at some point,
instead we should return a partial read for the amount that succeeded
prior, unless none succeeded at all, in which case we return -EFAULT as
before.
This makes it consistent with other reader interfaces. For example, the
following snippet for /dev/zero outputs "4" followed by "1":
int fd;
void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
assert(x != MAP_FAILED);
fd = open("/dev/zero", O_RDONLY);
assert(fd >= 0);
printf("%zd\n", read(fd, x, 4));
printf("%zd\n", read(fd, x + 4095, 4));
close(fd);
This brings that same standard behavior to the various RNG reader
interfaces.
While we're at it, we can streamline the loop logic a little bit.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Build of intel-speed-select will fail if you run:
$ LDFLAGS="-Wl,--as-needed" /usr/bin/make V=1
...
gcc -O2 -Wall -g -D_GNU_SOURCE -Iinclude -I/usr/include/libnl3 -Wl,--as-needed -lnl-genl-3 -lnl-3 intel-speed-select-in.o -o intel-speed-select
/usr/bin/ld: intel-speed-select-in.o: in function `handle_event':
(...)/linux/tools/power/x86/intel-speed-select/hfi-events.c:189: undefined reference to `nlmsg_hdr'
...
In this case the problem is that order when linking matters when using
the flag -Wl,--as-needed, symbols not used at that point are discarded.
So since intel-speed-select-in.o comes after, at that point the
libraries/symbols are already discarded and then missing/undefined
references are reported.
To fix this, make sure we specify LDFLAGS after the object file.
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Link: https://lore.kernel.org/r/20220404210525.725611-1-herton@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled. Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved. To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.
Fixes: 137d23cea1 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 11fd667dac.
dsa_slave_change_mtu() updates the MTU of the DSA master and of the
associated CPU port, but only if it detects a change to the master MTU.
The blamed commit in the Fixes: tag below addressed a regression where
dsa_slave_change_mtu() would return early and not do anything due to
ds->ops->port_change_mtu() not being implemented.
However, that commit also had the effect that the master MTU got set up
to the correct value by dsa_master_setup(), but the associated CPU port's
MTU did not get updated. This causes breakage for drivers that rely on
the ->port_change_mtu() DSA call to account for the tagging overhead on
the CPU port, and don't set up the initial MTU during the setup phase.
Things actually worked before because they were in a fragile equilibrium
where dsa_slave_change_mtu() was called before dsa_master_setup() was.
So dsa_slave_change_mtu() could actually detect a change and update the
CPU port MTU too.
Restore the code to the way things used to work by reverting the reorder
of dsa_tree_setup_master() and dsa_tree_setup_ports(). That change did
not have a concrete motivation going for it anyway, it just looked
better.
Fixes: 066dfc4290 ("Revert "net: dsa: stop updating master MTU from master.c"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.
When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.
Properly free the skb when consuming packets to fix that leak.
Fixes: 427f0c8c19 ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case where there is only a cycle counter available (i.e.
PMCR_EL0.N is 0) and an event other than CPU cycles is opened, the open
should fail as the event can never possibly be scheduled. However, the
event validation when an event is opened is skipped when the group
leader is opened. Fix this by always validating the group leader events.
Reported-by: Al Grant <al.grant@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20220408203330.4014015-1-robh@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
There is a deadlock in rs_close(), which is shown
below:
(Thread 1) | (Thread 2)
| rs_open()
rs_close() | mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rs_poll()
del_timer_sync() | spin_lock() //(2)
(wait timer to stop) | ...
We hold timer_lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need timer_lock in position (2) of thread 2.
As a result, rs_close() will block forever.
This patch deletes the redundant timer_lock in order to
prevent the deadlock. Because there is no race condition
between rs_close, rs_open and rs_poll.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Message-Id: <20220407154430.22387-1-duoming@zju.edu.cn>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
These patch_text implementations are using stop_machine_cpuslocked
infrastructure with atomic cpu_count. The original idea: When the
master CPU patch_text, the others should wait for it. But current
implementation is using the first CPU as master, which couldn't
guarantee the remaining CPUs are waiting. This patch changes the
last CPU as the master to solve the potential risk.
Fixes: 64711f9a47 ("xtensa: implement jump_label support")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: <stable@vger.kernel.org>
Message-Id: <20220407073323.743224-4-guoren@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Otherwise power_supply_get_battery_info always returns -ENODEV
on devices that do not have a static battery, even when a simple
battery is found.
Fixes: c8aee3f41c ("power: supply: Static data for Samsung batteries")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Two of the batteries were missing charging restart voltages,
meaning they can drain if the algorithm relies on restarting
charging at this voltage. Fix it up.
Fixes: c8aee3f41c ("power: supply: Static data for Samsung batteries")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix incorrect debug message:
Attempting to add event pmu 'intel_pt' with '' that may result in
non-fatal errors
which always appears with perf record -vv and intel_pt e.g.
perf record -vv -e intel_pt//u uname
The message is incorrect because there will never be non-fatal errors.
Suppress the message if the PMU is 'selectable' i.e. meant to be
selected directly as an event.
Fixes: 4ac22b484d ("perf parse-events: Make add PMU verbose output clearer")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The corresponding API for clk_prepare_enable is clk_disable_unprepare.
Make sure that the clock is unprepared on exit by changing clk_disable
to clk_disable_unprepare.
Fixes: ed31ee7cf1 ("phy: ti: usb2: Fix logic on -EPROBE_DEFER")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It looks like we still need to call dma_fence_put() on the man->move,
otherwise we just end up leaking it, leading to fireworks later.
v2(Daniel):
- Simplify the function tail
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5689
Fixes: 8bb3158782 ("drm/ttm: remove bo->moving")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413082133.272445-1-matthew.auld@intel.com
Commit ebe48d368e ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.
This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.
So let's flush the recovery worker before trying to powerdown the device.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.
So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the previous fix, we increased the max buffer bytes from 1MB to 4MB
so that we can use bigger buffers for the modern HiFi devices with
higher rates, more channels and wider formats. OTOH, extending this
has a concern that too big buffer is allowed for the lower rates, less
channels and narrower formats; when an application tries to allocate
as big buffer as possible, it'll lead to unexpectedly too huge size.
Also, we had a problem about the inconsistent max buffer and period
bytes for the implicit feedback mode when both streams have different
channels. This was fixed by the (relatively complex) patch to reduce
the max buffer and period bytes accordingly.
This is an alternative fix for those, a patch to kill two birds with
one stone (*): instead of increasing the max buffer bytes blindly and
applying the reduction per channels, we simply use the hw constraints
for the buffer and period "time". Meanwhile the max buffer and period
bytes are set unlimited instead.
Since the inconsistency of buffer (and period) bytes comes from the
difference of the channels in the tied streams, as long as we care
only about the buffer (and period) time, it doesn't matter; the buffer
time is same for different channels, although we still allow higher
buffer size. Similarly, this will allow more buffer bytes for HiFi
devices while it also keeps the reasonable size for the legacy
devices, too.
As of this patch, the max period and buffer time are set to 1 and 2
seconds, which should be large enough for all possible use cases.
(*) No animals were harmed in the making of this patch.
Fixes: 98c27add5d ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb")
Fixes: fee2ec8cce ("ALSA: usb-audio: Increase max buffer size")
Link: https://lore.kernel.org/r/20220412130740.18933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change for memory allocator replaced the SG-buffer handling
helper for x86 with the standard non-contiguous page handler. This
works for most cases, but there is a corner case I obviously
overlooked, namely, the fallback of non-contiguous handler without
IOMMU. When the system runs without IOMMU, the core handler tries to
use the continuous pages with a single SGL entry. It works nicely for
most cases, but when the system memory gets fragmented, the large
allocation may fail frequently.
Ideally the non-contig handler could deal with the proper SG pages,
it's cumbersome to extend for now. As a workaround, here we add new
types for (minimalistic) SG allocations, instead, so that the
allocator falls back to those types automatically when the allocation
with the standard API failed.
BTW, one better (but pretty minor) improvement from the previous
SG-buffer code is that this provides the proper mmap support without
the PCM's page fault handling.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2272
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1198248
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220413054808.7547-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We got issue as follows:
[home]# fsck.ext4 -fn ram0yb
e2fsck 1.45.6 (20-Mar-2020)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Symlink /p3/d14/d1a/l3d (inode #3494) is invalid.
Clear? no
Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0).
Fix? no
As the symlink file size does not match the file content. If the writeback
of the symlink data block failed, ext4_finish_bio() handles the end of IO.
However this function fails to mark the buffer with BH_write_io_error and
so when unmount does journal checkpoint it cannot detect the writeback
error and will cleanup the journal. Thus we've lost the correct data in the
journal area. To solve this issue, mark the buffer as BH_write_io_error in
ext4_finish_bio().
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
