Current DP driver implementation, event thread is kept running
after DP display is unbind. This patch fix this problem by disabling
DP irq and stop event thread to exit gracefully at dp_display_unbind().
Changes in v2:
-- start event thread at dp_display_bind()
Changes in v3:
-- disable all HDP interrupts at unbind
-- replace dp_hpd_event_setup() with dp_hpd_event_thread_start()
-- replace dp_hpd_event_stop() with dp_hpd_event_thread_stop()
-- move init_waitqueue_head(&dp->event_q) to probe()
-- move spin_lock_init(&dp->event_lock) to probe()
Changes in v4:
-- relocate both dp_display_bind() and dp_display_unbind() to bottom of file
Changes in v5:
-- cancel relocation of both dp_display_bind() and dp_display_unbind()
Changes in v6:
-- move empty event q to dp_event_thread_start()
Changes in v7:
-- call ktheread_stop() directly instead of dp_hpd_event_thread_stop() function
Changes in v8:
-- return error immediately if audio registration failed.
Changes in v9:
-- return error immediately if event thread create failed.
Changes in v10:
-- delete extra DRM_ERROR("failed to create DP event thread\n");
Fixes: 8ede2ecc3e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/482399/
Link: https://lore.kernel.org/r/1650318988-17580-1-git-send-email-quic_khsieh@quicinc.com
[DB: fixed Fixes tag]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since the last commit, the max_pclk_khz became constant, it's set to
DP_MAX_PIXEL_CLK_KHZ and never changed afterwards. Remove it completely
and use DP_MAX_PIXEL_CLK_KHZ directly.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480139/
Link: https://lore.kernel.org/r/20220330223008.649274-4-dmitry.baryshkov@linaro.org
[DB: applied a fix to follow connector->bridge conversion]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since dp_panel_get_modes() handling for dp_mode was removed,
dp_display_get_modes also doesn't change the passed dp_mode, drop the
unused dp_mode variable being allocated unused and then freed.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480137/
Link: https://lore.kernel.org/r/20220330223008.649274-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since the commit ab20592759 ("drm/msm/dp: remove mode hard-coding in
case of DP CTS") the function dp_panel_get_modes() doesn't use (or fill)
the dp_mode argument. Drop it completely.
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480138/
Link: https://lore.kernel.org/r/20220330223008.649274-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since DRM_DEBUG_DP is deprecated in favor of drm_dbg_dp(NULL, ...),
this patch replace all DRM_DEBUG_DP with drm_dbg_dp().
Changes in v4:
-- replace (strucr drm_dev *)NULL with drm_dev
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/474870/
Link: https://lore.kernel.org/r/1645122930-23863-4-git-send-email-quic_khsieh@quicinc.com
[DB: fixed compilation of dp_bridge_detect() caused by previous patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is little point in having both connector and root bridge
implementation in the same driver. Move connector's functionality to the
bridge to let next bridge in chain to override it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/473854/
Link: https://lore.kernel.org/r/20220211224006.1797846-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add wb_idx to existing DRM prints in dpu_encoder and also
print the intf_mode so that its clear that for any INTF_CMD/VID
there will be a valid intf_idx and any INTF_WB_* there will be a
valid wb_idx.
Update the debugfs to add the same information. Here is a sample
output with this change:
root:/sys/kernel/debug/dri/0/encoder31# cat status
intf:1 wb:-1 vsync: 31 underrun: 0 mode: INTF_MODE_VIDEO
root:/sys/kernel/debug/dri/0/encoder33# cat status
intf:-1 wb:2 vsync: 7 underrun: 0 mode: INTF_MODE_WB_LINE
Also remove DPU_DEBUG_PHYS macros as its unused because the
respective dpu_encoder_phys_* files have their own macros.
changes in v2:
- use switch case instead of if/else-if for get_intf_type
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483530/
Link: https://lore.kernel.org/r/1650984096-9964-19-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
kms_writeback test cases also verify with a null fb for the
writeback connector job. In addition there are also other
commit paths which can result in kickoffs without a valid
framebuffer like while closing the fb which results in the
callback to drm_atomic_helper_dirtyfb() which internally
triggers a commit.
Add protection in the dpu driver to ensure that commits for
writeback encoders without a valid fb are gracefully skipped.
changes in v2:
- rename dpu_encoder_has_valid_fb to dpu_encoder_is_valid_for_commit
changes in v3:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483522/
Link: https://lore.kernel.org/r/1650984096-9964-17-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Initialize dpu encoder and connector for writeback if the
target supports it in the catalog.
changes in v2:
- start initialing the encoder for writeback since we
have migrated to using drm_writeback_connector_init_with_encoder()
- instead of checking for WB_2 inside _dpu_kms_initialize_writeback
call it only when its WB_2
- rebase on tip of msm-next and remove usage of priv->encoders
changes in v3:
- none
changes in v4:
- fix copyright years order
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483526/
Link: https://lore.kernel.org/r/1650984096-9964-16-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Introduce the dpu_writeback module which serves as the
interface between dpu operations and the drm_writeback.
This module manages the connector related operations for
dpu writeback.
changes in v2:
- start using drm_writeback_connector_init_with_encoder()
- drop unnecessary arguments from dpu_writeback_init()
- rebase on msm-next tip and remove usage of priv->connectors
changes in v3:
- none
changes in v4:
- none
changes in v5:
- store the drm_enc in the dpu_wb_conn to be used while
using dpu_encoder APIs
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483520/
Link: https://lore.kernel.org/r/1650984096-9964-15-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
_dpu_plane_get_qos_lut() is not specific to just dpu_plane.
It can take any fill level and return the LUT matching it.
This can be used even for other modules like dpu_writeback.
Move _dpu_plane_get_qos_lut() to the common dpu_hw_util file
and rename it to _dpu_hw_get_qos_lut().
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483518/
Link: https://lore.kernel.org/r/1650984096-9964-13-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
add dpu encoder APIs to prepare and cleanup writeback job
for the writeback encoder. These shall be invoked from the
prepare_wb_job/cleanup_wb_job hooks of the drm_writeback
framework.
changes in v3:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483516/
Link: https://lore.kernel.org/r/1650984096-9964-12-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add an API to reset the encoder related hw blocks to ensure
a proper teardown of the pipeline. At the moment this is being
used only for the writeback encoder but eventually we can start
using this for all interfaces.
changes in v4:
- none
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483512/
Link: https://lore.kernel.org/r/1650984096-9964-10-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add the dpu_hw_wb abstraction to program registers related to the
writeback block. These will be invoked once all the configuration
is set and ready to be programmed to the registers.
changes in v3:
- start using the common struct dpu_hw_cdp_cfg
- leave a comment about DPU non-DPU_WB_QOS_8LVL chipsets
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483505/
Link: https://lore.kernel.org/r/1650984096-9964-7-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Rename dpu_hw_pipe_cdp_cfg to dpu_hw_cdp_cfg and move it
to dpu_hw_utils file so that other modules in addition to
SSPP such as writeback can use it as all the fields can
be used by writeback as well.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483503/
Link: https://lore.kernel.org/r/1650984096-9964-6-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add writeback blocks to the sm8250 DPU hardware catalog. Other
chipsets support writeback too but add it to sm8250 to prototype
the feature so that it can be easily extended to other chipsets.
changes in v4:
- fix the copyright year order
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/483510/
Link: https://lore.kernel.org/r/1650984096-9964-4-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
For vendors drivers which pass an already allocated and
initialized encoder especially for cases where the encoder
hardware is shared OR the writeback encoder shares the resources
with the rest of the display pipeline introduce a new API,
drm_writeback_connector_init_with_encoder() which expects
an initialized encoder as a parameter and only sets up the
writeback connector.
changes in v5:
- fix the encoder doc to indicate that its not valid for
users of drm_writeback_connector_init_with_encoder()
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/483500/
Link: https://lore.kernel.org/r/1650984096-9964-3-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Clients of drm_writeback_connector_init() initialize the
possible_crtcs and then invoke the call to this API.
To simplify things, allow passing possible_crtcs as a parameter
to drm_writeback_connector_init() and make changes to the
other drm drivers to make them compatible with this change.
changes in v2:
- split the changes according to their functionality
changes in v3:
- allow passing possible_crtcs for existing users of
drm_writeback_connector_init()
- squash the vendor changes into the same commit so
that each patch in the series can compile individually
changes in v4:
- keep only changes related to possible_crtcs
- add line breaks after ARRAY_SIZE
- stop using temporary variables for possible_crtcs
changes in v5:
- None
changes in v6:
- None
changes in v7:
- wrap long lines to match the coding style of existing drivers
- Fix indentation and remove parenthesis where not needed
- use u32 instead of uint32_t for possible_crtcs
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Patchwork: https://patchwork.freedesktop.org/patch/483501/
Link: https://lore.kernel.org/r/1650984096-9964-2-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The irq_of_parse_and_map() function returns 0 on failure, and does not
return a negative value anyhow, so never enter this conditional branch.
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/483291/
Link: https://lore.kernel.org/r/20220425090947.3498897-1-lv.ruyi@zte.com.cn
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
It's typical for the bootloader to bring up the display for showing a
boot splash or efi framebuffer. But in some cases the kernel driver ends
up only partially configuring (in particular) the DPU, which might
result in e.g. that two different data paths attempts to push data to
the interface - with resulting graphical artifacts.
Naturally the end goal would be to inherit the bootloader's
configuration and provide the user with a glitch free handover from the
boot configuration to a running DPU.
But as implementing seamless transition from the bootloader
configuration to the running OS will be a considerable effort, start by
simply resetting the entire MDSS to its power-on state, to avoid the
partial configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482796/
Link: https://lore.kernel.org/r/20220421041550.643964-2-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add an optional reference to the MDSS_CORE reset, which when specified
can be used by the implementation to reset the hardware blocks.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482794/
Link: https://lore.kernel.org/r/20220421041550.643964-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- Some DPU versions support inline rot90. It is supported only for
limited amount of UBWC formats.
- There are two versions of inline rotators, v1 (present on sm8250 and
sm7250) and v2 (sc7280). These versions differ in the list of supported
formats and in the scaler possibilities.
Co-developed-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/481672/
Link: https://lore.kernel.org/r/1649695021-19132-3-git-send-email-quic_vpolimer@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As per the specification of DPU_CTL_ACTIVE_CFG the configuration of
active blocks should be proactively specified, and the pingpong block is
no different.
The downstream display driver [1] confirms this by also calling
bind_pingpong_blk on CTL_ACTIVE_CFG. Note that this else-if is always
entered, as setup_intf_cfg - unlike this mainline dpu driver that
combines both behind the same function pointer - is left NULL in favour
of using setup_intf_cfg_v1 when CTL_ACTIVE_CFG is set.
This solves continuous timeouts on at least the Qualcomm sm6125 SoC:
[drm:dpu_encoder_frame_done_timeout:2091] [dpu error]enc31 frame done timeout
[drm:_dpu_encoder_phys_cmd_handle_ppdone_timeout.isra.0] *ERROR* id:31 pp:0 kickoff timeout 0 cnt 1 koff_cnt 1
[drm:dpu_encoder_phys_cmd_prepare_for_kickoff] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0
In the same way this pingpong block should also be unbound followed by
an interface flush when the encoder is disabled, according to the
downstream display driver [2].
[1]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder_phys_cmd.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n167
[2]: https://source.codeaurora.org/quic/la/platform/vendor/opensource/display-drivers/tree/msm/sde/sde_encoder.c?h=LA.UM.9.16.r1-08500-MANNAR.0#n2986
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/475874/
Link: https://lore.kernel.org/r/20220223114011.219044-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To remove possible confusion between (old) INTF_EDP and newer INTF_DP,
stop using INTF_EDP in DPU's code. Until the 8x74/8x84 SoCs are
supported by DPU driver, there is no point in using INTF_EDP.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475560/
Link: https://lore.kernel.org/r/20220222062246.242577-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU driver never supported INTF_EDP, so let's drop the obsolete comment.
If at some point 8x74/8x84's INTF_EDP is ported to DPU driver,
corresponding handling will have to be ported too. Until that time, the
comment serves no purpose.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475557/
Link: https://lore.kernel.org/r/20220222062246.242577-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This enum value does not correspond to any of actual interface types,
it's not used by the driver, and the value of INTF_WB is greater than
INTF_TYPE_MAX. Thus this symbol serves no purpose and can be removed.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475556/
Link: https://lore.kernel.org/r/20220222062246.242577-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Based on the discussions on the mailing list, document enum
dpu_intf_type and it's controversial fields: INTF_DP and INTF_EDP.
INTF_EDP is used for older eDP interface found on msm8x74/msm8x84
INTF_DP is used for both eDP and DP interfaces handled by the msm/dp
driver. The DPU driver does not make a difference between them.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/475555/
Link: https://lore.kernel.org/r/20220222062246.242577-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove additional indirection: specify IRQ callbacks and IRQ indices
directly rather than through the pointer in the irq structure. For each
IRQ we have a constant IRQ callback. This change simplifies code review
as the reader no longer needs to remember which function is called.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474700/
Link: https://lore.kernel.org/r/20220217043148.480898-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DPU interrupts code allows multiple callbacks per interrut. In reality
none of the interrupts is shared between blocks (and will probably never
be). Drop support for registering multiple callbacks per interrupt to
simplify interrupt handling code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474701/
Link: https://lore.kernel.org/r/20220217043148.480898-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
* Take care of faults occuring between the PARange and
IPA range by injecting an exception
* Fix S2 faults taken from a host EL0 in protected mode
* Work around Oops caused by a PMU access from a 32bit
guest when PMU has been created. This is a temporary
bodge until we fix it for good.
x86:
* Fix potential races when walking host page table
* Fix shadow page table leak when KVM runs nested
* Work around bug in userspace when KVM synthesizes leaf
0x80000021 on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJuxI4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNjfQf/X4Rn6+sTkXRS0UHWEu+q9FjJ+mIx
ZUWdbncf0brUB1RPAFfKaiQHo0t2Req+iTlpqZL0nVQ4myNUelHYube/sZdK/aBR
WOjKZE0hugGyMH3js2bsTdgzbcphThyYAX97qGZNb7tsPGhBiw7c98KhjxlieJab
D8LMNtM3uzPDxg422GfOm8ge2VbpySS5oRoGHfbD+4FiLYlXoCYfZuzlFwFFIGxw
uHm5zzfX5jshayFpFYVSJHtARXlpwJWKz9yl63QjHrhVitW4m5j4re3aNfboL6Pd
F5Z9K+DKhJLAH5cqmgiPPe2CGMvmRwKrN3F9MqV91xDPBT8J4rrowEeboQ==
=SwSU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to restore
the microcode-emulated MSRs but we thought wrong. So there's a fix for
that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
-----BEGIN PGP SIGNATURE-----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=poyP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols
-----BEGIN PGP SIGNATURE-----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=7nEx
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"A bunch of objtool fixes to improve unwinding, sibling call detection,
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols"
* tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix code relocs vs weak symbols
objtool: Fix type of reloc::addend
objtool: Fix function fallthrough detection for vmlinux
objtool: Fix sibling call detection in alternatives
objtool: Don't set 'jump_dest' for sibling calls
x86/uaccess: Don't jump between functions
Here are some small driver core and kernfs fixes for some reported
problems. They include:
- kernfs regression that is causing oopses in 5.17 and newer
releases
- topology sysfs fixes for a few small reported problems.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYm1QrQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJQACgj3QhUJxgKSQ6Rri+ODHg4KgDSZsAoIuD3rjq
5zRFYAcmogYgmN50HNVa
=2LQM
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and kernfs fixes for some reported
problems. They include:
- kernfs regression that is causing oopses in 5.17 and newer releases
- topology sysfs fixes for a few small reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: fix NULL dereferencing in kernfs_remove
topology: Fix up build warning in topology_is_visible()
arch_topology: Do not set llc_sibling if llc_id is invalid
topology: make core_mask include at least cluster_siblings
topology/sysfs: Hide PPIN on systems that do not support it.
