Johannes Berg reported a lockdep problem which could be reproduced by
the special test case introduced in this patch, so add it.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-5-boqun.feng@gmail.com
In the step #3 of check_irq_usage(), we seach backwards to find a lock
whose usage conflicts the usage of @target_entry1 on safe/unsafe.
However, we should only keep the irq-unsafe usage of @target_entry1 into
consideration, because it could be a case where a lock is hardirq-unsafe
but soft-safe, and in check_irq_usage() we find it because its
hardirq-unsafe could result into a hardirq-safe-unsafe deadlock, but
currently since we don't filter out the other usage bits, so we may find
a lock dependency path softirq-unsafe -> softirq-safe, which in fact
doesn't cause a deadlock. And this may cause misleading lockdep splats.
Fix this by only keeping LOCKF_ENABLED_IRQ_ALL bits when we try the
backwards search.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-4-boqun.feng@gmail.com
In print_bad_irq_dependency(), save_trace() is called to set the ->trace
for @prev_root as the current call trace, however @prev_root corresponds
to the the held lock, which may not be acquired in current call trace,
therefore it's wrong to use save_trace() to set ->trace of @prev_root.
Moreover, with our adjustment of printing backwards dependency path, the
->trace of @prev_root is unncessary, so remove it.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-3-boqun.feng@gmail.com
We use the same code to print backwards lock dependency path as the
forwards lock dependency path, and this could result into incorrect
printing because for a backwards lock_list ->trace is not the call trace
where the lock of ->class is acquired.
Fix this by introducing a separate function on printing the backwards
dependency path. Also add a few comments about the printing while we are
at it.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-2-boqun.feng@gmail.com
Now cpu.uclamp.min acts as a protection, we need to make sure that the
uclamp request of the task is within the allowed range of the cgroup,
that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and
tg->uclamp[UCLAMP_MAX].
As reported by Xuewen [1] we can have some corner cases where there's
inversion between uclamp requested by task (p) and the uclamp values of
the taskgroup it's attached to (tg). Following table demonstrates
2 corner cases:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 60%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 20%
-----------+-----+------+-----------
With this fix we get:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 30%
-----------+-----+------+-----------
Additionally uclamp_update_active_tasks() must now unconditionally
update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for
instance could have an impact on the effective UCLAMP_MIN of the tasks.
| p | tg | effective
-----------+-----+------+-----------
old
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
*new*
-----------+-----+------+-----------
uclamp_min | 60% | 0% | *60%*
-----------+-----+------+-----------
uclamp_max | 80% |*70%* | *70%*
-----------+-----+------+-----------
[1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/
Fixes: 0c18f2ecfc ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min")
Reported-by: Xuewen Yan <xuewen.yan94@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210617165155.3774110-1-qais.yousef@arm.com
DL keeps track of the utilization on a per-rq basis with the structure
avg_dl. This utilization is updated during task_tick_dl(),
put_prev_task_dl() and set_next_task_dl(). However, when the current
running task changes its policy, set_next_task_dl() which would usually
take care of updating the utilization when the rq starts running DL
tasks, will not see a such change, leaving the avg_dl structure outdated.
When that very same task will be dequeued later, put_prev_task_dl() will
then update the utilization, based on a wrong last_update_time, leading to
a huge spike in the DL utilization signal.
The signal would eventually recover from this issue after few ms. Even
if no DL tasks are run, avg_dl is also updated in
__update_blocked_others(). But as the CPU capacity depends partly on the
avg_dl, this issue has nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to DL.
Fixes: 3727e0e ("sched/dl: Add dl_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-3-git-send-email-vincent.donnefort@arm.com
RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.
The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to RT.
Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com
LLVM does not emit optimal byteswap assembly, which results in high
stack usage in kvmhv_enter_nested_guest() due to the inlining of
byteswap_pt_regs(). With LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:289:6: error: stack frame size of
2512 bytes in function 'kvmhv_enter_nested_guest' [-Werror,-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 error generated.
While this gets fixed in LLVM, mark byteswap_pt_regs() as
noinline_for_stack so that it does not get inlined and break the build
due to -Werror by default in arch/powerpc/. Not inlining saves
approximately 800 bytes with LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:290:6: warning: stack frame size of
1728 bytes in function 'kvmhv_enter_nested_guest' [-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 warning generated.
Cc: stable@vger.kernel.org # v4.20+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1292
Link: https://bugs.llvm.org/show_bug.cgi?id=49610
Link: https://lore.kernel.org/r/202104031853.vDT0Qjqj-lkp@intel.com/
Link: https://gist.github.com/ba710e3703bf45043a31e2806c843ffd
Link: https://lore.kernel.org/r/20210621182440.990242-1-nathan@kernel.org
The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().
hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().
Fix it by adding a check for the return value irq_id.
Signed-off-by: Jiajun Cao <jjcao20@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
KVM/arm64 support for MTE, courtesy of Steven Price.
It allows the guest to use memory tagging, and offers
a new userspace API to save/restore the tags.
* kvm-arm64/mmu/mte:
KVM: arm64: Document MTE capability and ioctl
KVM: arm64: Add ioctl to fetch/store tags in a guest
KVM: arm64: Expose KVM_ARM_CAP_MTE
KVM: arm64: Save/restore MTE registers
KVM: arm64: Introduce MTE VM feature
arm64: mte: Sync tags for pages where PTE is untagged
Signed-off-by: Marc Zyngier <maz@kernel.org>
Conceptually, this belongs more into the firmware utils
rather than the mvm opmode, so move the collection and
output there.
Note that this slightly changes the format of the Status
line.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.b82b60d81346.Ide3b688107f6a59c7fc7eb1d8f2002b0a5c1f2d2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This new feature allows OEMs to set a special reduced power table in a
UEFI variable, which we use to tell the firmware to change the TX
power tables.
Read the variable and store it in a dram block to pass it to the
firmware. We do this as part of the PNVM loading flow.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.259a33ba5074.I2e0bb142d2a9c412547cba89b62dd077b328fdc4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In gen3, after firmware is alive, we no longer need the
firmware and image loader images, only the context info
itself and PRPH info/scratch need to remain.
Call iwl_pcie_ctxt_info_gen3_free() appropriately in the
alive callback (iwl_trans_pcie_gen2_fw_alive()) with a new
argument indicating whether it can free everything or only
partially.
The context info and PRPH scratch are also not needed after
PNVM load, but we don't have a good hook for freeing after
that, so keep them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.8230d91a46c1.Ia7db71e5e6265ca87363f1481eac1bc3bbebb15c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't fill in phy_data.d1 in no-data RX, and thus we
pretend some data is actually filled in radiotap when it
isn't or has default (zero) values.
Fill in phy_data.d1 appropriately, and while at it also
move the info_type initialization into the initializer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.3d488885f77c.Ib97a2bc57c1e9fb98927dc6f802568db313abe3b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.
Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
It's been a while that the firmware uses LONG_GROUP by default
and not LEGACY_GROUP.
Until now the firmware wrongly advertise the WOWLAN_GET_STATUS
command's version with LEGACY_GROUP, but it is now being fixed.
In order to support both firmwares, first try to get the version
number of the command with the LONG_GROUP and if the firmware
didn't advertise the command version with LONG_GROUP, try to get
the command version with LEGACY_GROUP.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.cd6f4e421430.Iec07c746c8e65bc267e4750f38e4f74f2010ca45@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
These two version updates deprecate the need to set/get the nonqos sequence
counter during suspend/resume flow respectively; NICs supporting this
version maintain this counter internally and don't lose it during the
suspend/resume flow.
Note that this means that for such NICs the NON_QOS_TX_COUNTER_CMD is no
longer ever sent.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.dd25dd667798.I8db9adcdbb133304b58cf417f8698611138c83b4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When operating in AP mode with NICs supporting the AP_LINK_PS hw flag,
mac80211 doesn't need to start/stop queueing tx for connected stations
because the FW already handles that.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.64df994c8fbb.I0fa5cda3a5f893a396eef30a01522422be359e69@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In case of unbinding, the FW would remove the session protection time
events without sending a notification, so explicitly cancel the
session protection, so future requests for mgd_prepare_tx() would not
assume that the session protection is running.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.7c30f85ed241.Ibc19fdbefca7135f2c4ea83d0aef6b81b5033dcd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the UNII4 setting from the ACPI table and use it in the
LARI_CONFIG_CHANGE_CMD accordingly.
This setting allows OEMs to enable or disable UNII4, bypassing the FW
defaults.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.223090c509c4.If03cb5393607ae494041b6187bcec134d6a1e06d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The TR/CR tail data are meant to be per-queue-arrays, however,
we allocate them completely wrong (we have a separate allocation
per queue).
Looking at this more closely, it turns out that the hardware
never uses these - we have a separate free list per RX queue
and maintain a write pointer for that in a register, and the
RX itself is indicated in the RB status (rb_stts) DMA region.
Despite nothing using the tail pointers, the hardware will
unconditionally access them to write updates, even when we aren't
using CRs/TRs.
Give it dummy values that we never use/update so it can do that
without causing trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617110647.5f5764e04c46.I4d5de1929be048085767f1234a1e07b517ab6a2d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
syzbot reported a memory leak related to sigqueue caching.
The assumption that a task cannot cache a sigqueue after the signal handler
has been dropped and exit_task_sigqueue_cache() has been invoked turns out
to be wrong.
Such a task can still invoke release_task(other_task), which cleans up the
signals of 'other_task' and ends up in sigqueue_cache_or_free(), which in
turn will cache the signal because task->sigqueue_cache is NULL. That's
obviously bogus because nothing will free the cached signal of that task
anymore, so the cached item is leaked.
This happens when e.g. the last non-leader thread exits and reaps the
zombie leader.
Prevent this by setting tsk::sigqueue_cache to an error pointer value in
exit_task_sigqueue_cache() which forces any subsequent invocation of
sigqueue_cache_or_free() from that task to hand the sigqueue back to the
kmemcache.
Add comments to all relevant places.
Fixes: 4bad58ebc8 ("signal: Allow tasks to cache one sigqueue struct")
Reported-by: syzbot+0bac5fec63d4f399ba98@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/878s32g6j5.ffs@nanos.tec.linutronix.de
In the nested KVM case, replace H_TLB_INVALIDATE by the new hcall
H_RPT_INVALIDATE if available. The availability of this hcall
is determined from "hcall-rpt-invalidate" string in ibm,hypertas-functions
DT property.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-7-bharata@linux.ibm.com
Now that we have H_RPT_INVALIDATE fully implemented, enable
support for the same via KVM_CAP_PPC_RPT_INVALIDATE KVM capability
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-6-bharata@linux.ibm.com
Enable support for process-scoped invalidations from nested
guests and partition-scoped invalidations for nested guests.
Process-scoped invalidations for any level of nested guests
are handled by implementing H_RPT_INVALIDATE handler in the
nested guest exit path in L0.
Partition-scoped invalidation requests are forwarded to the
right nested guest, handled there and passed down to L0
for eventual handling.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[aneesh: Nested guest partition-scoped invalidation changes]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Squash in fixup patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-5-bharata@linux.ibm.com
The practical upside here is that this only needs a single API call to
program the hardware which (depending on the underlaying hardware) can
be more effective and prevents glitches.
Up to now the return value of the pwm functions was ignored. Fix this
and propagate the error to the caller.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.
While touching that also add the error code to the failure message.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
A new capability (KVM_CAP_ARM_MTE) identifies that the kernel supports
granting a guest access to the tags, and provides a mechanism for the
VMM to enable it.
A new ioctl (KVM_ARM_MTE_COPY_TAGS) provides a simple way for a VMM to
access the tags of a guest without having to maintain a PROT_MTE mapping
in userspace. The above capability gates access to the ioctl.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-7-steven.price@arm.com
The VMM may not wish to have it's own mapping of guest memory mapped
with PROT_MTE because this causes problems if the VMM has tag checking
enabled (the guest controls the tags in physical RAM and it's unlikely
the tags are correct for the VMM).
Instead add a new ioctl which allows the VMM to easily read/write the
tags from guest memory, allowing the VMM's mapping to be non-PROT_MTE
while the VMM can still read/write the tags for the purpose of
migration.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-6-steven.price@arm.com
It's now safe for the VMM to enable MTE in a guest, so expose the
capability to user space.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-5-steven.price@arm.com
Define the new system registers that MTE introduces and context switch
them. The MTE feature is still hidden from the ID register as it isn't
supported in a VM yet.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-4-steven.price@arm.com
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
This reverts commit d37300ed18 ("bpf: program: Refuse non-O_RDWR flags
in BPF_OBJ_GET"). It breaks Android userspace which expects to be able to
fetch programs with just read permissions.
See: https://cs.android.com/android/platform/superproject/+/master:frameworks/libs/net/common/native/bpf_syscall_wrappers/include/BpfSyscallWrappers.h;drc=7005c764be23d31fa1d69e826b4a2f6689a8c81e;l=124
Side-note: another option to fix it would be to extend bpf_prog_new_fd()
and to pass in used file mode flags in the same way as we do for maps via
bpf_map_new_fd(). Meaning, they'd end up in anon_inode_getfd() and thus
would be retained for prog fd operations with bpf() syscall. Right now
these flags are not checked with progs since they are immutable for their
lifetime (as opposed to maps which can be updated from user space). In
future this could potentially change with new features, but at that point
it's still fine to do the bpf_prog_new_fd() extension when needed. For a
simple stable fix, a revert is less churn.
Fixes: d37300ed18 ("bpf: program: Refuse non-O_RDWR flags in BPF_OBJ_GET")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
[ Daniel: added side-note to commit message ]
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Greg Kroah-Hartman <gregkh@google.com>
Link: https://lore.kernel.org/bpf/20210618105526.265003-1-zenczykowski@gmail.com
We used this in may_commit_transaction() in order to determine if we
needed to commit the transaction. However we no longer have that logic
and thus have no use of this counter anymore, so delete it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
