Commit graph

1031296 commits

Author SHA1 Message Date
Viresh Kumar
952da0c9ab cpufreq: powernv: Migrate to ->exit() callback instead of ->stop_cpu()
Commit 367dc4aa93 ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.

At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.

This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
->exit(), as everything can be done from the ->exit() callback
itself.

Migrate to using the ->exit() callback instead of ->stop_cpu().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-30 18:51:43 +02:00
Viresh Kumar
9357a380f9 cpufreq: CPPC: Migrate to ->exit() callback instead of ->stop_cpu()
Commit 367dc4aa93 ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.

At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.

This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
-<exit(), as everything can be done from the ->exit() callback
itself.

Migrate to using the ->exit() callback instead of ->stop_cpu().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the changelog and subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-30 18:49:29 +02:00
Rafael J. Wysocki
49d6feef94 cpufreq: intel_pstate: Combine ->stop_cpu() and ->offline()
Combine the ->stop_cpu() and ->offline() callback routines for
intel_pstate in the active mode so as to avoid setting the
->stop_cpu callback pointer which is going to be dropped from
the framework.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-06-30 18:44:46 +02:00
Zhang Yi
16aa4c9a1f jbd2: export jbd2_journal_[un]register_shrinker()
Export jbd2_journal_[un]register_shrinker() to fix this error when
ext4 is built as a module:

  ERROR: modpost: "jbd2_journal_unregister_shrinker" undefined!
  ERROR: modpost: "jbd2_journal_register_shrinker" undefined!

Fixes: 4ba3fcdde7 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210630083638.140218-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-06-30 11:05:00 -04:00
Paul Burton
b81b3e959a tracing: Simplify & fix saved_tgids logic
The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.

The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.

A minimal fix would be to remove the call to trace_find_tgid, turning:

  if (trace_find_tgid(*ptr))

into:

  if (*ptr)

..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.

Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com

Fixes: d914ba37d7 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-30 09:19:14 -04:00
Joe Perches
78c14b385c treewide: Add missing semicolons to __assign_str uses
The __assign_str macro has an unusual ending semicolon but the vast
majority of uses of the macro already have semicolon termination.

$ git grep -P '\b__assign_str\b' | wc -l
551
$ git grep -P '\b__assign_str\b.*;' | wc -l
480

Add semicolons to the __assign_str() uses without semicolon termination
and all the other uses without semicolon termination via additional defines
that are equivalent to __assign_str() with the eventual goal of removing
the semicolon from the __assign_str() macro definition.

Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/
Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-30 09:19:14 -04:00
Austin Kim
bfbf8d157a tracing: Change variable type as bool for clean-up
The wakeup_rt wakeup_dl, tracing_dl is only set to 0, 1.
So changing type of wakeup_rt wakeup_dl, tracing_dl as bool
makes relevant routine be more readable.

Link: https://lkml.kernel.org/r/20210629140548.GA1627@raspberrypi

Signed-off-by: Austin Kim <austin.kim@lge.com>
[ Removed unneeded initialization of static bool tracing_dl ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-06-30 09:19:14 -04:00
Rafael J. Wysocki
ad6b010d81 - Add support for the Qcom MSM8226 (Bartosz Dudziak)
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmDRhckACgkQqDIjiipP
 6E98lggAiMzuvF8eSvq+maQc787J8vfteM7UiSyexpdh/0GUqDOVM1CBxUV5MGoE
 hRZe/hSW8PfgkZ7eGwe2bRnzSs60i6tQT9l2zkgdpuImlpCz/kZrEGkYjmP16zzM
 81yVPpan4QgKWRMKI8A1SVdbkRvwmw9HuQxOyBcNaR9qlxjhYwt2Kihga80UjCUs
 HkaKSP16JNkepmzCHBdaIyMW2cTlN8r+pCe8g5dBZ5hXwVCjcW7CGBxtQBzFgS8O
 t5V06hkgvG619qfEgvipbCdOREgZgNz95alth5OIE4Ihqyb3N4u9xHC8Ah9AsQ/u
 UAF1r0KClULdoVvGSIr+CnhOLCWb9A==
 =doID
 -----END PGP SIGNATURE-----

Merge tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux

Pull ARM cpuidle updates for v5.14 from Daniel Lezcano:

"- Add support for Qcom MSM8226 (Bartosz Dudziak)"

* tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux:
  cpuidle: qcom: Add SPM register data for MSM8226
  dt-bindings: arm: msm: Add SAW2 for MSM8226
2021-06-30 14:56:51 +02:00
Alain Volmat
e4a5c19888
spi: stm32h7: fix full duplex irq handler handling
In case of Full-Duplex mode, DXP flag is set when RXP and TXP flags are
set. But to avoid 2 different handlings, just add TXP and RXP flag in
the mask instead of DXP, and then keep the initial handling of TXP and
RXP events.
Also rephrase comment about EOTIE which is one of the interrupt enable
bits. It is not triggered by any event.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/1625042723-661-3-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-30 13:50:32 +01:00
Axel Lin
5db5dd5be7
regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure
Since config.dev = pdev->dev.parent in current code, so
dev_get_drvdata(rdev->dev.parent) actually returns the drvdata of the mfd
device rather than the regulator. Fix it.

Fixes: 9bc146acc3 ("regulator: hi6421v600: Fix setting wrong driver_data")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210630074246.2305166-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-30 13:49:32 +01:00
Lucas Stach
2c70ff56e4
ASoC: codecs: allow SSM2518 to be selected by the user
Allow the Analog SSM2518 driver to be enabled without a large
bunch of other drivers.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20210628210458.2508973-1-l.stach@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-30 13:49:30 +01:00
Wei Li
cf02ce742f MIPS: Fix PKMAP with 32-bit MIPS huge page support
When 32-bit MIPS huge page support is enabled, we halve the number of
pointers a PTE page holds, making its last half go to waste.
Correspondingly, we should halve the number of kmap entries, as we just
initialized only a single pte table for that in pagetable_init().

Fixes: 35476311e5 ("MIPS: Add partial 32-bit huge page support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:41:32 +02:00
周琰杰 (Zhou Yanjie)
34c522a07c MIPS: CI20: Add second percpu timer for SMP.
1.Add a new TCU channel as the percpu timer of core1, this is to
  prepare for the subsequent SMP support. The newly added channel
  will not adversely affect the current single-core state.
2.Adjust the position of TCU node to make it consistent with the
  order in jz4780.dtsi file.

Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
23c64447b3 MIPS: CI20: Reduce clocksource to 750 kHz.
The original clock (3 MHz) is too fast for the clocksource,
there will be a chance that the system may get stuck.

Reported-by: Nikolaus Schaller <hns@goldelico.com>
Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
ab3040e137 MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
2bc434b12d dt-bindings: clock: Add documentation for MAC PHY control bindings.
Update the CGU binding documentation, add mac-phy-ctrl as a
pattern property.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
周琰杰 (Zhou Yanjie)
579f73cf84 MIPS: X1830: Respect cell count of common properties.
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N * X) cells.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-30 14:37:16 +02:00
Nicholas Piggin
91fc46eced powerpc/64s: move ret_from_fork etc above __end_soft_masked
Code which runs with interrupts enabled should be moved above
__end_soft_masked where possible, because maskable interrupts that hit
below that symbol will need to consult the soft mask table, which is an
extra cost.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-10-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
c59458b00a powerpc/64s/interrupt: clean up interrupt return labels
Normal kernel-interrupt exits can get interrupt_return_srr_user_restart
in their backtrace, which is an unusual and notable function, and it is
part of the user-interrupt exit path, which is doubly confusing.

Add non-local labels for both user and kernel interrupt exit cases to
address this and make the user and kernel cases more symmetric. Also get
rid of an unused label.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-9-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
98798f33c6 powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
If one interrupt exit symbol must not be kprobed, none of them can be,
without more justification for why it's safe. Disallow kprobing on any
of the (non-local) labels in the exit paths.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-8-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
2b43dd7653 powerpc/64: enable MSR[EE] in irq replay pt_regs
Similar to commit 2b48e96be2 ("powerpc/64: fix irq replay
pt_regs->softe value"), enable MSR_EE in pt_regs->msr. This makes the
regs look more normal. It also allows some extra debug checks to be
added to interrupt handler entry.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-7-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
1b0482229c powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
If an NMI interrupt hits in an implicit soft-masked region, regs->softe
is modified to reflect that. This may not be necessary for correctness
at the moment, but it is less surprising and it's unhelpful when
debugging or adding checks.

Make sure this is changed back to how it was found before returning.

Fixes: 4ec5feec1a ("powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-6-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
325678fd05 powerpc/64s: add a table of implicit soft-masked addresses
Commit 9d1988ca87 ("powerpc/64: treat low kernel text as irqs
soft-masked") ends up catching too much code, including ret_from_fork,
and parts of interrupt and syscall return that do not expect to be
interrupts to be soft-masked. If an interrupt gets marked pending,
and then the code proceeds out of the implicit soft-masked region it
will fail to deal with the pending interrupt.

Fix this by adding a new table of addresses which explicitly marks
the regions of code that are soft masked. This table is only checked
for interrupts that below __end_soft_masked, so most kernel interrupts
will not have the overhead of the table search.

Fixes: 9d1988ca87 ("powerpc/64: treat low kernel text as irqs soft-masked")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-5-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
9b69d48c75 powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
The implicit soft-masking to speed up interrupt return was going to be
used by 64e as well, but it has not been extensively tested on that
platform and is not considered ready. It was intended to be disabled
before merge. Disable it for now.

Most of the restart code is common with 64s, so with more correctness
and performance testing this could be re-enabled again by adding the
extra soft-mask checks to interrupt handlers and flipping
exit_must_hard_disable().

Fixes: 9d1988ca87 ("powerpc/64: treat low kernel text as irqs soft-masked")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-4-npiggin@gmail.com
2021-06-30 22:21:20 +10:00
Nicholas Piggin
fce01acf83 powerpc/64e: fix CONFIG_RELOCATABLE build warnings
CONFIG_RELOCATABLE=y causes build warnings from unresolved relocations.
Fix these by using TOC addressing for these cases.

Commit 24d33ac5b8 ("powerpc/64s: Make prom_init require RELOCATABLE")
caused some 64e configs to select RELOCATABLE resulting in these
warnings, but the underlying issue was already there.

This passes basic qemu testing.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-3-npiggin@gmail.com
2021-06-30 22:21:19 +10:00
Nicholas Piggin
5567b1ee29 powerpc/64s: fix hash page fault interrupt handler
The early bad fault or key fault test in do_hash_fault() ends up calling
into ___do_page_fault without having gone through an interrupt handler
wrapper (except the initial _RAW one). This can end up calling local irq
functions while the interrupt has not been reconciled, which will likely
cause crashes and it trips up on a later patch that adds more assertions.

pkey_exec_prot from selftests causes this path to be executed.

There is no real reason to run the in_nmi() test should be performed
before the key fault check. In fact if a perf interrupt in the hash
fault code did a stack walk that was made to take a key fault somehow
then running ___do_page_fault could possibly cause another hash fault
causing problems. Move the in_nmi() test first, and then do everything
else inside the regular interrupt handler function.

Fixes: 3a96570ffc ("powerpc: convert interrupt handlers to use wrappers")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-2-npiggin@gmail.com
2021-06-30 22:21:19 +10:00
Christophe Leroy
fc4999864b powerpc/4xx: Fix setup_kuep() on SMP
On SMP, setup_kuep() is also called from start_secondary() since
commit 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C").

start_secondary() is not an __init function.

Remove the __init marker from setup_kuep() and bail out when
not caller on the first CPU as the work is already done.

Fixes: 10248dcba1 ("powerpc/44x: Implement Kernel Userspace Exec Protection (KUEP)")
Fixes: 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ee05934288994a65743a987acb1558f12c0c8c1.1624969450.git.christophe.leroy@csgroup.eu
2021-06-30 22:21:02 +10:00
Christophe Leroy
c89e632658 powerpc/32s: Fix setup_{kuap/kuep}() on SMP
On SMP, setup_kup() is also called from start_secondary().

start_secondary() is not an __init function.

Remove the __init marker from setup_kuep() and setup_kuap().

Fixes: 86f46f3432 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42f4bd12b476942e4d5dc81c0e839d8871b20b1c.1624863319.git.christophe.leroy@csgroup.eu
2021-06-30 22:20:39 +10:00
Miquel Raynal
0bcc3939c9 SPI NOR core changes:
- Ability to dump SFDP tables via sysfs
 - Support for erasing OTP regions on Winbond and similar flashes
 - Few API doc updates and fixes
 - Locking support for MX25L12805D
 
 SPI NOR controller drivers changes:
 - Use SPI_MODE_X_MASK in nxp-spifi
 - Intel Alder Lake-M SPI serial flash support
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmDVedQQHHZpZ25lc2hy
 QHRpLmNvbQAKCRDERh5FfJEW45dXB/9Cn4xhHr73JZX54XDXQIgR7cFGbgXzZI+W
 nrzLsCCpt0RrVwYQBXv8f6IY7u4uEgH+dhsXMruY+gYDh+NJoj9REMRr3PwWhH5o
 R/ajQsDsBuGmtQ+I8RDpHYCQaNtgHqpnBQ+qmErbdK3FMxOyQ9gQkDC5097NDu4e
 QXTaMJbRHsxTt8U7qRO/3XIEW10GHq33gftBcZD/DrKcTIO9GT6GGi9aGN9YPsv4
 zDpjgOjZyqzJndgHavTQKxVC9csuQIUFcA2fgHO3rEaiF/TLUXemJAmrEMziVDS2
 7c8KgtAssHRJdjCqUn6A0/JomNdxFzGPVN2bWf4/aLgnacXmn0Xe
 =acH1
 -----END PGP SIGNATURE-----

Merge tag 'spi-nor/for-5.14' into mtd/next

SPI NOR core changes:
- Ability to dump SFDP tables via sysfs
- Support for erasing OTP regions on Winbond and similar flashes
- Few API doc updates and fixes
- Locking support for MX25L12805D

SPI NOR controller drivers changes:
- Use SPI_MODE_X_MASK in nxp-spifi
- Intel Alder Lake-M SPI serial flash support
2021-06-30 12:52:24 +02:00
Ingo Molnar
a22a5cb81e Merge branch 'sched/core' into sched/urgent, to pick up fix
Pick up a fix for a warning that several people reported.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-06-30 12:31:41 +02:00
Mikel Rychliski
f18f58012e drm/radeon: Fix NULL dereference when updating memory stats
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:

	BUG: kernel NULL pointer dereference, address: 0000000000000010
	RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
	Call Trace:
	 radeon_bo_unref+0x1a/0x30 [radeon]
	 radeon_gem_object_free+0x33/0x50 [radeon]
	 drm_gem_object_release_handle+0x69/0x70 [drm]
	 drm_gem_handle_delete+0x62/0xa0 [drm]
	 ? drm_mode_destroy_dumb+0x40/0x40 [drm]
	 drm_ioctl_kernel+0xb2/0xf0 [drm]
	 drm_ioctl+0x30a/0x3c0 [drm]
	 ? drm_mode_destroy_dumb+0x40/0x40 [drm]
	 radeon_drm_ioctl+0x49/0x80 [radeon]
	 __x64_sys_ioctl+0x8e/0xd0

Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.

Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
2021-06-30 11:56:21 +02:00
Mike Rapoport
a4d5613c4d arm: extend pfn_valid to take into account freed memory map alignment
When unused memory map is freed the preserved part of the memory map is
extended to match pageblock boundaries because lots of core mm
functionality relies on homogeneity of the memory map within pageblock
boundaries.

Since pfn_valid() is used to check whether there is a valid memory map
entry for a PFN, make it return true also for PFNs that have memory map
entries even if there is no actual memory populated there.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2021-06-30 11:39:00 +03:00
Mike Rapoport
023accf5cd memblock: ensure there is no overflow in memblock_overlaps_region()
There maybe an overflow in memblock_overlaps_region() if it is called with
base and size such that

	base + size > PHYS_ADDR_MAX

Make sure that memblock_overlaps_region() caps the size to prevent such
overflow and remove now duplicated call to memblock_cap_size() from
memblock_is_region_reserved().

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2021-06-30 11:38:56 +03:00
Mike Rapoport
f921f53e08 memblock: align freed memory map on pageblock boundaries with SPARSEMEM
When CONFIG_SPARSEMEM=y the ranges of the memory map that are freed are not
aligned to the pageblock boundaries which breaks assumptions about
homogeneity of the memory map throughout core mm code.

Make sure that the freed memory map is always aligned on pageblock
boundaries regardless of the memory model selection.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2021-06-30 11:38:51 +03:00
Mike Rapoport
e2a86800d5 memblock: free_unused_memmap: use pageblock units instead of MAX_ORDER
The code that frees unused memory map uses rounds start and end of the
holes that are freed to MAX_ORDER_NR_PAGES to preserve continuity of the
memory map for MAX_ORDER regions.

Lots of core memory management functionality relies on homogeneity of the
memory map within each pageblock which size may differ from MAX_ORDER in
certain configurations.

Although currently, for the architectures that use free_unused_memmap(),
pageblock_order and MAX_ORDER are equivalent, it is cleaner to have common
notation thought mm code.

Replace MAX_ORDER_NR_PAGES with pageblock_nr_pages and update the comments
to make it more clear why the alignment to pageblock boundaries is
required.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2021-06-30 11:38:33 +03:00
Jiri Kosina
b3e2964254 Merge branch 'for-5.14/multitouch' into for-linus
- patch series that ensures that hid-multitouch driver disables touch and
  button-press reporting on hid-mt devices during suspend when the device is
  not configured as a wakeup-source, from Hans de Goede
2021-06-30 09:15:15 +02:00
Jiri Kosina
8f4ef88eba Merge branch 'for-5.14/logitech' into for-linus
- support for LCD menu keys + LCD brightness control on the Logitech Z-10
  speakers (with LCD) which use the same protocol as the G15 keyboards
  from Hans de Goede
2021-06-30 09:12:44 +02:00
Jiri Kosina
33197bd3e8 Merge branch 'for-5.14/intel-ish' into for-linus
- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König
2021-06-30 09:06:53 +02:00
Jiri Kosina
7f1f380398 Merge branch 'for-5.14/google' into for-linus
- device tree match for Google Whiskers device from Ikjoon Jang
2021-06-30 09:05:31 +02:00
Jiri Kosina
fd73788ce6 Merge branch 'for-5.14/core' into for-linus
- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
  from Thomas Weißschuh
- various other small fixes and code style improvements
2021-06-30 09:03:51 +02:00
Jiri Kosina
5a94296bc0 Merge branch 'for-5.14/amd-sfh' into for-linus
- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor

all from Basavaraj Natikar
2021-06-30 09:02:28 +02:00
Dave Airlie
8a02ea42bc The biggest fix is the restoration of mmap ioctl for gen12 integrated parts
which lack was breaking ADL-P with media stack.
 Besides that a small selftest fix and a theoretical overflow on
 i915->pipe_to_crtc_mapping.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmDbbG8ACgkQ+mJfZA7r
 E8pr0AgAr/M7Mv+U53yPIO6vz4IUN6jT63A5j5agS5CG8NMLrS72WVfDoMH9o3vU
 vIX94Evx3EAmhyt4v54Knojt1LakBOceHEzeK9+Outa8fSjikvUnppucUSPrZXjM
 DSzrf737ZX45SDtowbDC13Dh4FJZ8yWWC11Im20G7dUVCtYH6ECR4WJcLKJ7f6el
 mcMuCjpOV9kzxOVPkLL8jzfAoZ/3CiklceAVQimmVvlf7VgzExnFEz+8fwXF5bAC
 Vjx+Hpx28CT516tKdsD1KX2u+JPtHIXREIXnLGeZH3lV2b9KvDezsUEDziuEl3/+
 fGDZwJXCMbgTCcw6gDya/lZjIXJp5g==
 =X/yj
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-fixes-2021-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

The biggest fix is the restoration of mmap ioctl for gen12 integrated parts
which lack was breaking ADL-P with media stack.
Besides that a small selftest fix and a theoretical overflow on
i915->pipe_to_crtc_mapping.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YNtsfguvCRSROBUZ@intel.com
2021-06-30 15:42:05 +10:00
Dave Airlie
4bac159e59 Short summary of fixes pull:
* amdgpu: Fix test for allocation failures
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmDUMQsACgkQaA3BHVML
 eiNZeQf/Qs8J69XbEUEZ8FvqBbu/4vUr+nREvG69KZsb9oZnUK5Q40GA1IqDt2ig
 vl9DL84ZXpjX2/dwRock2KuZEAC7OO1XWnbQVWn6IGIc38G4RPMfiwLsF+g2Xqot
 mxIZ98wlHdQfJAaAsW5ftjI9pr4yos+Ldo+X6yfzD7zm9KD9VNTJc6oTg/hiAD9Q
 4YeNBMSeRtFoWgLYegQJUkDZTLN8PdweBkxptQswid9C3yrbAtUKfcbuALFuIvm3
 8mDDI/ZV8j0UlJvIYtZPd9PPEkd4iSwG1sjlq+C5e4Vg+cPQmPzdYyPsnkCn/om9
 qTS1Bsb6sBQDHlnNvcHCEMrtKXnCtA==
 =HHZQ
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-fixes-2021-06-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Short summary of fixes pull:

 * amdgpu: Fix test for allocation failures

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YNQxVybBGdjLMUQJ@linux-uq9g
2021-06-30 14:24:06 +10:00
Chengming Gui
a2f55040cf drm/amd/amdgpu: enable gpu recovery for beige_goby
Enable gpu recovery for beige_goby.

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:56 -04:00
Darren Powell
91161b06be amdgpu/pm: remove code duplication in show_power_cap calls
v3: updated patch to apply to latest code
 v2: reorder to check pointers before calling pm_runtime_* functions

 created generic function and call with enum from
 * amdgpu_hwmon_show_power_cap_max
 * amdgpu_hwmon_show_power_cap
 * amdgpu_hwmon_show_power_cap_default

=== Test ===
AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 10`
HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

cp pp_show_power_cap.txt{,.old}
lspci -nn | grep "VGA\|Display" > pp_show_power_cap.test.log
FILES="
power1_cap
power1_cap_max
power1_cap_default "

for f in $FILES
do
  echo  $f = `cat $HWMON_DIR/$f` >> pp_show_power_cap.test.log
done

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:56 -04:00
Alex Deucher
ed50995514 drm/amdgpu/display: drop unused variable
Remove unused variable.

Fixes: e7d9560aea ("Revert "drm/amd/display: Fix overlay validation by considering cursors"")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:23 -04:00
Rodrigo Siqueira
e7d9560aea Revert "drm/amd/display: Fix overlay validation by considering cursors"
This reverts commit 33f409e60e.

The patch that we are reverting here was originally applied because it
fixes multiple IGT issues and flickering in Android. However, after a
discussion with Sean Paul and Mark, it looks like that this patch might
cause problems on ChromeOS. For this reason, we decided to revert this
patch.

Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Mark Yacoub <markyacoub@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2021-06-30 00:18:23 -04:00
Veerabadhran Gopalakrishnan
b3a24461f9 amdgpu/nv.c - Added codec query for Beige Goby
Added the Beige Goby capabilities in codec query.

v2: fix build error and indent (James)

Signed-off-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:23 -04:00
Aaron Liu
c8af9390e5 drm/amdgpu: enable tmz on yellow carp
The tmz functions are verified on yellow carp. So enable it by
default.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:23 -04:00
Philip Yang
d4ebc20070 drm/amdkfd: implement counters for vm fault and migration
Add helper function to get process device data structure from adev to
update counters.

Update vm faults, page_in, page_out counters will no be executed in
parallel, use WRITE_ONCE to avoid any form of compiler optimizations.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-30 00:18:23 -04:00