There was no feedback on bad registration attempts. Add details on the
failure cause.
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
The legay ide driver has been replace with libata starting in 2003 and has
been scheduled for removal for a while. Finally kill it off so that we
can start cleaning up various bits of cruft it forced on the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch the m68 defconfigs from the deprecated ide subsystem to use libata
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210616134658.1471835-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
pxa_defconfig already enables libata including the pata_pcmcia driver, so
drop the legacy ide driver and idecs host driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
footbridge_defconfig enables CONFIG_IDE but no actual host controller
driver, so just drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210616134658.1471835-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multiple users report that they need to disable DMA on this driver,
so provide an option to do so without affecting all of libata.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210616134658.1471835-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark queue init done when everything is done well in blk_register_queue(),
so that wbt_enable_default() can be run quickly without any RCU period
involved since adding rq qos requires to freeze queue.
Also no any side effect by delaying to mark queue init done.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yi reported several kernel panics on:
[16687.001777] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
[16687.163549] pc : __rq_qos_track+0x38/0x60
or
[ 997.690455] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
[ 997.850347] pc : __rq_qos_done+0x2c/0x50
Turns out it is caused by race between adding rq qos(wbt) and normal IO
because rq_qos_add can be run when IO is being submitted, fix this issue
by freezing queue before adding/deleting rq qos to queue.
rq_qos_exit() needn't to freeze queue because it is called after queue
has been frozen.
iolatency calls rq_qos_add() during allocating queue, so freezing won't
add delay because queue usage refcount works at atomic mode at that
time.
iocost calls rq_qos_add() when writing cgroup attribute file, that is
fine to freeze queue at that time since we usually freeze queue when
storing to queue sysfs attribute, meantime iocost only exists on the
root cgroup.
wbt_init calls it in blk_register_queue() and queue sysfs attribute
store(queue_wb_lat_store() when write it 1st time in case of !BLK_WBT_MQ),
the following patch will speedup the queue freezing in wbt_init.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Link: https://lore.kernel.org/r/20210609015822.103433-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of returning the the PTR_ERR directly, use dev_err_probe which
will also correctly set the deferred probe reason in
/sys/kernel/debug/deferred_devices, making it easier to debug missing
devices on the system.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20210616125331.153414-1-r.czerwinski@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
At the context with *rdev, use rdev_get_drvdata() is more intuitive.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-3-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's only used in this file and never changed, make it static const.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20210616034458.3499522-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The vsel active level is for the normal voltage, the opposite level is
the suspend voltage.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/20210616011816.3479406-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This symbol is not used outside of hdmi-codec.c, so marks it static.
Fix the following sparse warning:
sound/soc/codecs/hdmi-codec.c:750:25: warning: symbol
'hdmi_codec_controls' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822941-3077-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return statements in functions returning bool should use true/false
instead of 1/0.
Fix the following coccicheck warning:
./sound/soc/codecs/wcd938x.c:1190:9-10: WARNING: return of 0/1 in
function 'wcd938x_volatile_register' with return type bool.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623811535-15841-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warnings:
./sound/soc/codecs/wcd938x.c: sound/soc.h is included more than once.
./sound/soc/codecs/wcd938x-sdw.c: sound/soc.h is included more than
once.
No functional change.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1623822667-130511-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This implementation uses spin_until_cond in wd_smp_lock including
neither linux/processor.h nor asm/processor.h
This patch includes linux/processor.h here for spin_until_cond usage.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5e8d2d50f301a346040362028c2ecba40685de9e.1623438544.git.christophe.leroy@csgroup.eu
PPC_TRANSACTIONAL_MEM is only on book3s/64
SPE is only on booke
PPC_TRANSACTIONAL_MEM selects ALTIVEC and VSX
Therefore, within PPC_TRANSACTIONAL_MEM sections,
ALTIVEC and VSX are always defined while SPE never is.
Remove all SPE code and all #ifdef ALTIVEC and VSX in tm
functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a069a348ee3c2fe3123a5a93695c2b35dc42cb40.1623340691.git.christophe.leroy@csgroup.eu
Make our stack-walking code KASAN-safe by using __no_sanitize_address.
Generic code, arm64, s390 and x86 all make accesses unchecked for similar
sorts of reasons: when unwinding a stack, we might touch memory that KASAN
has marked as being out-of-bounds. In ppc64 KASAN development, I hit this
sometimes when checking for an exception frame - because we're checking
an arbitrary offset into the stack frame.
See commit 2095574632 ("s390/kasan: avoid false positives during stack
unwind"), commit bcaf669b4b ("arm64: disable kasan when accessing
frame->fp in unwind_frame"), commit 91e08ab0c8 ("x86/dumpstack:
Prevent KASAN false positive warnings") and commit 6e22c83664
("tracing, kasan: Silence Kasan warning in check_stack of stack_tracer").
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210614120907.1952321-1-dja@axtens.net
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
Comment says that __main() is there to make GCC happy.
It's been there since the implementation of ppc arch in Linux 1.3.45.
ppc32 is the only architecture having that. Even ppc64 doesn't have it.
Seems like GCC is still happy without it.
Drop it for good.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d01028f8166b98584eec536b52f14c5e3f98ff6b.1623172922.git.christophe.leroy@csgroup.eu
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
At the time being, empty_zero_page[] is defined in each
platform head.S.
Define it in mm/mem.c instead, and put it in BSS section instead
of the DATA section. Commit 5227cfa71f ("arm64: mm: place
empty_zero_page in bss") explains why it is interesting to have
it in BSS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5838caffa269e0957c5a50cc85477876220298b0.1623063174.git.christophe.leroy@csgroup.eu
DEBUG_CLAMP_LAST_CONTEXT was there in the old days to reduce
number of contexts in order to ease debugging implementation
of context switching, but that's been quite stable during
years now.
As it is not user selectable, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da81837b452e8b9f1657b529b9c3050dc10b9770.1622712515.git.christophe.leroy@csgroup.eu
All KUAP helpers defined in asm/kup.h are single line functions
that should be inlined. But on book3s/32 build, we get many
instances of <prevent_write_to_user.constprop.0>.
Force inlining of those helpers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8479a862e165a57a855292d47e24c259a578f5a0.1622711627.git.christophe.leroy@csgroup.eu
Now that KUAP and KUEP have been significantly optimised and can be
disabled at boot time using 'nosmap' and 'nosmep' kernel parameters,
them can be active by default like in other powerpc platforms.
It is still possible to disable them completely in the configuration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86c7c74a3ba5312daea7e9658b096e2bcc6f4b64.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUAP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUAP related actions are in C following the
conversion of KUAP initial setup and context switch in C,
static branches can be used to enable/disable KUAP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Export disable_kuap_key to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cd79e8008455fba5395d099f9bb1305c039b931c.1622708530.git.christophe.leroy@csgroup.eu
PPC64 uses MMU features to enable/disable KUEP at boot time.
But feature fixups are applied way too early on PPC32.
Now that all KUEP related actions are in C following the
conversion of KUEP initial setup and context switch in C,
static branches can be used to enable/disable KUEP.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7745a2c3a08ec46302920a3f48d1cb9b5469dbbb.1622708530.git.christophe.leroy@csgroup.eu
segment register has VSID on bits 8-31.
Bits 4-7 are reserved, there is no requirement to set them to 0.
VSIDs are calculated from VSID of SR0 by adding 0x111.
Even with highest possible VSID which would be 0xFFFFF0,
adding 16 times 0x111 results in 0x1001100.
So, the reserved bits are never overflowed, no need to clear
the reserved bits after each calculation.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddc1cfd2ec8f3b2395c6a4d7f2b0c1aa1b1e64fb.1622708530.git.christophe.leroy@csgroup.eu
