There is no reason/desire to print module information upon module load.
Drop this printk (and a version define).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the ISA cards removal in the previous patch, the mxser_cards array
has holes in it. So renumber the array while updating PCI device's
driver_data.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While mxser PCI cards are still around and produced (Moxa provided me
with two recently), ISA cards are obsolete for a long time. I haven't
seen anyone using the cards and the ISA code paths are barely tested.
Hence, remove ISA support from mxser driver so that we can clean the
driver up.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using eth_broadcast_addr() to assign broadcast address instead
of copying from an array that contains the all-ones broadcast
address.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616081243.2511663-4-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using eth_broadcast_addr() to assign broadcast address instead
of copying from an array that contains the all-ones broadcast
address.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616081243.2511663-3-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using eth_broadcast_addr() to assign broadcast address instead
of memset() or copying from an array that contains the all-ones
broadcast address.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616081243.2511663-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the check for _rtw_enqueue_cmd(), because
rtw_enqueue_cmd() already has a check of NULL pointer,
so this condition is not possible.
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Link: https://lore.kernel.org/r/20210616125332.31674-1-maqianga@uniontech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wrap the definition of TX_RATE_* constants in parenthesis to prevent
incorrect casting during expansion, as recommended by checkpatch.pl.
Signed-off-by: Caleb D.S. Brzezinski <calebdsb@protonmail.com>
Link: https://lore.kernel.org/r/20210616212552.117604-1-calebdsb@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The continue statement at the end of a for-loop has no effect,
remove it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Continue has no effect")
Link: https://lore.kernel.org/r/20210617120411.11612-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
add this information to help user to find ashmem problem.
ashmem leak scenario:
-000|fd = ashmem_create_region
-001|mmap and pagefault
-002|munmap
-003|forget close(fd) <---- which lead to ashmem leak
Signed-off-by: liuhailong <liuhailong@oppo.com>
收件人: 刘海龙(DuckBuBee) <liuhailong@oppo.com>
Link: https://lore.kernel.org/r/20210618095035.32410-1-liuhailong@oppo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The root_hpa checks below the top-level check in kvm_mmu_page_fault are
theoretically redundant since there is no longer a way for the root_hpa
to be reset during a page fault. The details of why are described in
commit ddce620821 ("KVM: x86/mmu: Move root_hpa validity checks to top
of page fault handler")
__direct_map, kvm_tdp_mmu_map, and get_mmio_spte are all only reachable
through kvm_mmu_page_fault, therefore their root_hpa checks are
redundant.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210617231948.2591431-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change simplifies the call sites slightly and also abstracts away
the implementation detail of looking at root_hpa as the mechanism for
determining if the mmu is the TDP MMU.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210617231948.2591431-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check is redundant because the root shadow page will only be a TDP
MMU page if is_tdp_mmu_enabled() returns true, and is_tdp_mmu_enabled()
never changes for the lifetime of a VM.
It's possible that this check was added for performance reasons but it
is unlikely that it is useful in practice since to_shadow_page() is
cheap. That being said, this patch also caches the return value of
is_tdp_mmu_root() in direct_page_fault() since there's no reason to
duplicate the call so many times, so performance is not a concern.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210617231948.2591431-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check for is_tdp_mmu_root in kvm_tdp_mmu_map is redundant because
kvm_tdp_mmu_map's only caller (direct_page_fault) already checks
is_tdp_mmu_root.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210617231948.2591431-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If is_tdp_mmu_root is not inlined, the elimination of TDP MMU calls as dead
code might not work out. To avoid this, explicitly declare the stubbed
is_tdp_mmu_root on 32-bit hosts.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if NX is reported as supported but not enabled in EFER. All flavors
of the kernel, including non-PAE 32-bit kernels, set EFER.NX=1 if NX is
supported, even if NX usage is disable via kernel command line. KVM relies
on NX being enabled if it's supported, e.g. KVM will generate illegal NPT
entries if nx_huge_pages is enabled and NX is supported but not enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210615164535.2146172-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refuse to load KVM if NX support is not available. Shadow paging has
assumed NX support since commit 9167ab7993 ("KVM: vmx, svm: always run
with EFER.NXE=1 when shadow paging is active"), and NPT has assumed NX
support since commit b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation").
While the NX huge pages mitigation should not be enabled by default for
AMD CPUs, it can be turned on by userspace at will.
Unlike Intel CPUs, AMD does not provide a way for firmware to disable NX
support, and Linux always sets EFER.NX=1 if it is supported. Given that
it's extremely unlikely that a CPU supports NPT but not NX, making NX a
formal requirement is far simpler than adding requirements to the
mitigation flow.
Fixes: 9167ab7993 ("KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active")
Fixes: b8e8c8303f ("kvm: mmu: ITLB_MULTIHIT mitigation")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210615164535.2146172-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refuse to load KVM if NX support is not available and EPT is not enabled.
Shadow paging has assumed NX support since commit 9167ab7993 ("KVM:
vmx, svm: always run with EFER.NXE=1 when shadow paging is active"), so
for all intents and purposes this has been a de facto requirement for
over a year.
Do not require NX support if EPT is enabled purely because Intel CPUs let
firmware disable NX support via MSR_IA32_MISC_ENABLES. If not for that,
VMX (and KVM as a whole) could require NX support with minimal risk to
breaking userspace.
Fixes: 9167ab7993 ("KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210615164535.2146172-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the type and name of task_struct::state. Drop the volatile and
shrink it to an 'unsigned int'. Rename it in order to find all uses
such that we can use READ_ONCE/WRITE_ONCE as appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20210611082838.550736351@infradead.org
All 6 architectures define TASK_STATE in asm-offsets, but then never
actually use it. Remove the definitions to make sure they never will.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210611082838.472811363@infradead.org
There's an existing helper for setting TASK_RUNNING; must've gotten
lost last time we did this cleanup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.409696194@infradead.org
When ran from the sched-out path (preempt_notifier or perf_event),
p->state is irrelevant to determine preemption. You can get preempted
with !task_is_running() just fine.
The right indicator for preemption is if the task is still on the
runqueue in the sched-out path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210611082838.285099381@infradead.org
Replace a bunch of 'p->state == TASK_RUNNING' with a new helper:
task_is_running(p).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.222401495@infradead.org
Remove broken task->state references and let wake_up_process() DTRT.
The anti-pattern in these patches breaks the ordering of ->state vs
COND as described in the comment near set_current_state() and can lead
to missed wakeups:
(OoO load, observes RUNNING)<-.
for (;;) { |
t->state = UNINTERRUPTIBLE; |
smp_mb(); ,-----> | (observes !COND)
| /
if (COND) ---------' | COND = 1;
break; `- if (t->state != RUNNING)
wake_up_process(t); // not done
schedule(); // forever waiting
}
t->state = TASK_RUNNING;
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210611082838.160855222@infradead.org
We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates
Fixes: 80d55154b2 ("mac80211: minstrel_ht: significantly redesign the rate probing strategy")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210617103854.61875-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit in sched/urgent moved the cfs_rq_is_decayed() function:
a7b359fc6a: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
and this fresh commit in sched/core modified it in the old location:
9e077b52d8: ("sched/pelt: Check that *_avg are null when *_sum are")
Merge the two variants.
Conflicts:
kernel/sched/fair.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: 7e5ea974e6 ("pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO")
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210606191940.29312-1-andy.shevchenko@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no reason to be limited to 4kiB page NAND chips just because
this is the maximum length the ELM is able to handle in one go. Just
call the ELM several times and it will process as many data as needed.
Here we introduce the concept of ECC page (which is at most 4kiB). The
ELM will be sought as many times as there are ECC pages.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Ryan Barnett <ryan.barnett@collins.com>
Link: https://lore.kernel.org/linux-mtd/20210610134906.3503303-6-miquel.raynal@bootlin.com
The macro BADBLOCK_MARKER_LENGTH is pretty long and could be reduced to
BBM_LEN which is more handy to use in the code.
This is a purely cosmetic change and is only done to avoid further
change to contain 100+ char lines just because of this definition.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610134906.3503303-3-miquel.raynal@bootlin.com
This hardware controller is embedded in XilinX Zynq-7000 SoCs and has
partial support for Hamming ECC correction.
This work is inspired from the original contributions of Punnaiah
Choudary Kalluri and Naga Sureshkumar Relli.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Michael Walle <michael@walle.cc> [on zynq-7000]
Link: https://lore.kernel.org/linux-mtd/20210610082040.2075611-19-miquel.raynal@bootlin.com
After power up, all SPI NAND's blocks are locked. Only read operations
are allowed, write and erase operations are forbidden.
The SPI NAND framework unlocks all the blocks during its initialization.
During a standby low power, the memory is powered down, losing its
configuration.
During the resume, the QSPI driver state is restored but the SPI NAND
framework does not reconfigured the memory.
This patch adds SPI-NAND MTD PM handlers for resume ops.
SPI NAND resume op re-initializes SPI NAND flash to its probed state.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210602094913.26472-4-patrice.chotard@foss.st.com
There are 2 timing registers:
- "data interface"
- "timings"
So far, the "data interface" register was named "timings" which begins
misleading when bringing support for the "timings" register. Rename it
to "data_iface".
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210527084959.208804-1-miquel.raynal@bootlin.com
Without the use of le16_to_cpu(), these accesses would have been wrong
on a big-endian machine.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 45606518f9 ("mtd: rawnand: Add onfi_fill_nvddr_interface_config() helper")
Fixes: 9310668fb6 ("mtd: rawnand: Retrieve NV-DDR timing modes from the ONFI parameter page")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210527084913.208635-1-miquel.raynal@bootlin.com
Xilinx ZynqMP SoC and the Arasan controller support 64-bit DMA
addressing. Define the right mask otherwise the default is 32
and some accesses may overflow the default mask.
Reported-by: Jorge Courett <jorge.courett@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Jorge Courett <jorge.courett@gmail.com>
Link: https://lore.kernel.org/linux-mtd/20210527084548.208429-1-miquel.raynal@bootlin.com
