Provide mlx5_core device instead of "priv" pointer while checking
eswith mode.
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
After conversion to use auxiliary bus, all custom device management is
not needed anymore, delete it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
A Root Complex Event Collector terminates error and PME messages from
associated RCiEPs.
Use the RCEC Endpoint Association Extended Capability to identify
associated RCiEPs. Link the associated RCiEPs as the RCECs are enumerated.
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-12-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KwFgTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWlN+CAC0H96QVQTS5+osg3FOaBMO/whp3Wgw
AA/W8g/TyzW41CnuSRr/B90p+XOYdn7xyt3YjsI1KDUuwMzeMncVq/rLZBdJmsyk
q1ra+zkz430W6oE3+xr7By50RGVHH1c1fbhpaS+Jb2xRYqPmjneHk/aHt7SH2DAX
HhViT6GW0k7rg+NrwZCw9sjOC4/dSz63i0wQAuvM06DK4hLzY54CwV5cQwCnUzA8
ZK6N69cayP/6A0L6RyEKbH3E9YbT0lrD3+Q6VtSYVn/8Dcftx9McyFEckqEOWq0a
3XywXhFbc9L8WhM6XxmobxXlIg/HlhhY9MjHMGu76LthhpLe0YAp0Yyh
=RnxG
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull fix for device mapper fixes from Mike Snitzer:
"Apologies for the glaring bug I introduced with my previous pull
request!
Fix incorrect branching at top of blk_max_size_offset()"
* tag 'for-5.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
block: fix incorrect branching in blk_max_size_offset()
Namespaced file capabilities were introduced in 8db6c34f1d .
When userspace reads an xattr for a namespaced capability, a
virtualized representation of it is returned if the caller is
in a user namespace owned by the capability's owning rootid.
The function which performs this virtualization was not hooked
up if CONFIG_SECURITY=n. Therefore in that case the original
xattr was shown instead of the virtualized one.
To test this using libcap-bin (*1),
$ v=$(mktemp)
$ unshare -Ur setcap cap_sys_admin-eip $v
$ unshare -Ur setcap -v cap_sys_admin-eip $v
/tmp/tmp.lSiIFRvt8Y: OK
"setcap -v" verifies the values instead of setting them, and
will check whether the rootid value is set. Therefore, with
this bug un-fixed, and with CONFIG_SECURITY=n, setcap -v will
fail:
$ v=$(mktemp)
$ unshare -Ur setcap cap_sys_admin=eip $v
$ unshare -Ur setcap -v cap_sys_admin=eip $v
nsowner[got=1000, want=0],/tmp/tmp.HHDiOOl9fY differs in []
Fix this bug by calling cap_inode_getsecurity() in
security_inode_getsecurity() instead of returning
-EOPNOTSUPP, when CONFIG_SECURITY=n.
*1 - note, if libcap is too old for getcap to have the '-n'
option, then use verify-caps instead.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209689
Cc: Hervé Guillemet <herve@guillemet.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
Signed-off-by: Andrew G. Morgan <morgan@kernel.org>
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
A "wakeup" is a signal from a device telling the system that the device or
the whole system should be awakened and made active. PCI devices are made
active by "resuming" them.
pci_wakeup_bus() is not involved with the wakeup signal; it *resumes*
devices on a bus (possibly in response to a wakeup signal, but that's at a
higher level).
Rename pci_wakeup_bus() to pci_resume_bus() to better reflect what it does.
No functional change intended.
[bhelgaas: commit log, reorder before removal of pci_wakeup_event()]
Link: https://lore.kernel.org/r/20201125090733.77782-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If non-zero 'chunk_sectors' is passed in to blk_max_size_offset() that
override will be incorrectly ignored.
Old blk_max_size_offset() branching, prior to commit 3ee16db390,
must be used only if passed 'chunk_sectors' override is zero.
Fixes: 3ee16db390 ("dm: fix IO splitting")
Cc: stable@vger.kernel.org # 5.9
Reported-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Currently, the sock_from_file prototype takes an "err" pointer that is
either not set or set to -ENOTSOCK IFF the returned socket is NULL. This
makes the error redundant and it is ignored by a few callers.
This patch simplifies the API by letting callers deduce the error based
on whether the returned socket is NULL or not.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-1-revest@google.com
Restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KonYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgSJCACNYEndubrROJZL+FOUQixzZQiOfphw
9Brb/XbdXWXIv7F+JV85E6olOqz7JjTGrO91uD5kwHEtVhDx5zT/GCm+5FoBrLa/
FuTphPRWNimZSU1umJe2AG9hOiDpPJJUe/wwj3QkBH2TeEHwBHblB8BkRFzxnP+p
0dGybrQBMtrH3GO65YG7qaASeBPl1+G3mVHfzViyhk1uoZL1y9pKbzPK60TkHcsa
VCGTPke5Ri3hvd85hmpDcXmyxjxZfCA8Jc/DrQ+DDEwakHoJFwlSzP7fqwHnpKHT
RDL4iOID54SViSGqzNcxlGtr/EHyN9Mom2d4Nnb0cgsRG4woCeJWJZMM
=+o1m
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM's bio splitting changes that were made during v5.9. This
restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
* tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: remove invalid sparse __acquires and __releases annotations
dm: fix double RCU unlock in dm_dax_zero_page_range() error path
dm: fix IO splitting
dm writecache: remove BUG() and fail gracefully instead
dm table: Remove BUG_ON(in_interrupt())
dm: fix bug with RCU locking in dm_blk_report_zones
Revert "dm cache: fix arm link errors with inline"
dm writecache: fix the maximum number of arguments
dm writecache: advance the number of arguments when reporting max_age
dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
PCI Express Extended Capabilities are in config space between offsets 256
and 4K. These offsets all fit in 16 bits.
Change the return type of pci_find_ext_capability() and supporting
functions from int to u16 to match the specification. Many callers use
"int", which is fine, but there's no need to store more than a u16.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI Capabilities are linked in a list that must appear in the first 256
bytes of config space. Each capabilities list pointer is 8 bits.
Change the return type of pci_find_capability() and supporting functions
from int to u8 to match the specification.
[bhelgaas: change other related interfaces, fix HyperTransport typos]
Link: https://lore.kernel.org/r/20201129164626.12887-1-puranjay12@gmail.com
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/KnpUACgkQJNaLcl1U
h9CWvQf9EdHZFlsDiP8PbbSLtMzpkqaJOlmg3A1Rn6XOYjztDEDQQp12vYC9jOmJ
PkBz8kh+0dohTt6TIx5IEt+r1pbYWAzFOkX7v3QzYp8+nrmd1bT/RDRglOrmydLH
ntd9XNE1BA8k9n4YQQBWrspDEnwnpCygSw4lP/QXz7OyyhnZ7fYGOG3hPXKw+Sdj
gQugmSAnUYaVti4d7K6Cuhj08HT13FvGFqrkLYljTmsnnVw0T4kXNFtiODMe1QMq
YYeKiHCFI8ysk2hK0sYdmwr5rz5eWT5mGnSXPGsD3o876NF1uw+Q5iTX57uydDrp
GijjnCOGz+yZ7dfBi2MAflP5Xsw4ew==
=SVwj
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into asoc-5.11
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.
And commit 5091cdec56 ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).
Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.
Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.
Fixes: 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56 ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJfyTQyAAoJEG4XJFUm622bCdcIAIyVnqdW7pnoDmWIyQmAEnD9
vGARkzghPHXnufpOzohyDdxT12X9klhrxSVIgzEgH1/pl3i1PpnF6KXyGFCC44Lw
wrLXhQygPzmIW1IZtJJE3G72WExXoRjWx6LD1I7C7oEIduqFixXADmK2tKzFp795
Jxum+sOeT6+Dk1OvO/fIroBHX73mRE9zAuiTIMpt2G1j8uXs9QVfcTbTrUshLASN
0sX9J6JutltBuM4G7+bFpVzKnLnlQ7ebUaF6nvTCQsgHWZwkS7yAubSWX9sFohbR
UXgQHNE83s/esOg7nBxAfqTKP8mbxsobmxZtxE5GR5vFY5FJDxqP9Zc2KzPp39w=
=CbX/
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend support for Root Complex Event Collectors by decoding and caching
the RCEC Endpoint Association Extended Capabilities when enumerating. Use
that cached information for later error source reporting. See PCIe r5.0,
sec 7.9.10.
Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-4-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal
errors through a Root Complex Event Collector (RCEC). Each RCiEP must be
associated with no more than one RCEC.
For an RCEC (which is technically not a Bridge), error messages "received"
from associated RCiEPs must be enabled for "transmission" in order to cause
a System Error via the Root Control register or (when the Advanced Error
Reporting Capability is present) reporting via the Root Error Command
register and logging in the Root Error Status register and Error Source
Identification register.
Given the commonality with Root Ports and the need to also support AER and
PME services for RCECs, extend the Root Port driver to support RCEC devices
by adding the RCEC Class ID to the driver structure.
Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com>
Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC
Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
The request_queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, locking of ->session is very inconsistent; most places
protect it using the legacy tty mutex, but disassociate_ctty(),
__do_SAK(), tiocspgrp() and tiocgsid() don't.
Two of the writers hold the ctrl_lock (because they already need it for
->pgrp), but __proc_set_tty() doesn't do that yet.
On a PREEMPT=y system, an unprivileged user can theoretically abuse
this broken locking to read 4 bytes of freed memory via TIOCGSID if
tiocgsid() is preempted long enough at the right point. (Other things
might also go wrong, especially if root-only ioctls are involved; I'm
not sure about that.)
Change the locking on ->session such that:
- tty_lock() is held by all writers: By making disassociate_ctty()
hold it. This should be fine because the same lock can already be
taken through the call to tty_vhangup_session().
The tricky part is that we need to shorten the area covered by
siglock to be able to take tty_lock() without ugly retry logic; as
far as I can tell, this should be fine, since nothing in the
signal_struct is touched in the `if (tty)` branch.
- ctrl_lock is held by all writers: By changing __proc_set_tty() to
hold the lock a little longer.
- All readers that aren't holding tty_lock() hold ctrl_lock: By
adding locking to tiocgsid() and __do_SAK(), and expanding the area
covered by ctrl_lock in tiocspgrp().
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_termiox() and the TCGETX handler bail out with -EINVAL immediately
if ->termiox is NULL, but there are no code paths that can set
->termiox to a non-NULL pointer; and no such code paths seem to have
existed since the termiox mechanism was introduced back in
commit 1d65b4a088 ("tty: Add termiox") in v2.6.28.
Similarly, no driver actually implements .set_termiox; and it looks like
no driver ever has.
Delete this dead code; but leave the definition of struct termiox in the
UAPI headers intact.
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20201203020331.2394754-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Here is the MHI patch set for v5.11. Most of the patches are cleanups and fixes
but there are some noticeable changes too:
1. Loic finally removed the auto-start option from the channel parameters of the
MHI controller. It is the duty of the client drivers like qrtr to start/stop the
channels when required, so we decided to remove this option. As a side effect,
we changed the qrtr driver to start the channels during its probe and removed
the auto-start option from ath11k controller.
**NOTE** Since these changes spawns both MHI and networking trees, the patches
are maintained in an immutable branch [1] and pulled into both mhi-next and
ath11k-next branches. The networking patches got acks from ath11k and networking
maintainers as well.
2. Loic added a generic MHI pci controller driver. This driver will be used by
the PCI based Qualcomm modems like SDX55 and exposes channels such as QMI,
IP_HW0, IPCR etc...
3. Loic fixed the MHI device hierarchy by maintaining the correct parent child
relationships. Earlier all MHI devices lived in the same level under the parent
device like PCIe. But now, the MHI devices belonging to channels will become the
children of controller MHI device.
4. Finally Loic also improved the MHI device naming by using indexed names such
as mhi0, mhi1, etc... This will break the userspace applications depending on
the old naming convention but since the only one user so far is Jeff Hugo's AI
accelerator apps, we decided to make this change now itself with his agreement.
5. Bhaumik fixed the qrtr driver by stopping the channels during remove. This
patch also got ack from networking maintainer and we decided to take it through
MHI tree (via immutable branch) since we already had a qrtr change.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git/log/?h=mhi-ath11k-immutable
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAl/Hwn4ACgkQVZ8R5v6R
zvWCQQgAh7vbwjAvxmzk5OTkuenv9YRV8lYMNTt1zdnXt8k0navv2Tc2M4e6VKbS
WFGCSUCBUQ3wiQ8OZvXVrFMLRm6gramUZEQwn6db7PtcpSUZxoB6w6u/IK5BdD5H
mXUAmJhRP5AUZQ+rWRFpWNAOAzPs6GwfC57KdO44oMuTEyR7FfvNv2X5JaYCbOsM
XBL8aLHFTShdauQREECs3uovaQrBo1BNqMlC+YEdaRhO7ukit4WSeZoEFHS50YSD
nevEJ7R35Cq4s2MQ3gLU5ps5FvRLRoNN5pimy9LUWgq6W/BPGlA7mRIEtDQNu19H
YBlr6G+G/7tvycjxhIkwQ0axmbTrew==
=XZOV
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI patches for v5.11
Here is the MHI patch set for v5.11. Most of the patches are cleanups and fixes
but there are some noticeable changes too:
1. Loic finally removed the auto-start option from the channel parameters of the
MHI controller. It is the duty of the client drivers like qrtr to start/stop the
channels when required, so we decided to remove this option. As a side effect,
we changed the qrtr driver to start the channels during its probe and removed
the auto-start option from ath11k controller.
**NOTE** Since these changes spawns both MHI and networking trees, the patches
are maintained in an immutable branch [1] and pulled into both mhi-next and
ath11k-next branches. The networking patches got acks from ath11k and networking
maintainers as well.
2. Loic added a generic MHI pci controller driver. This driver will be used by
the PCI based Qualcomm modems like SDX55 and exposes channels such as QMI,
IP_HW0, IPCR etc...
3. Loic fixed the MHI device hierarchy by maintaining the correct parent child
relationships. Earlier all MHI devices lived in the same level under the parent
device like PCIe. But now, the MHI devices belonging to channels will become the
children of controller MHI device.
4. Finally Loic also improved the MHI device naming by using indexed names such
as mhi0, mhi1, etc... This will break the userspace applications depending on
the old naming convention but since the only one user so far is Jeff Hugo's AI
accelerator apps, we decided to make this change now itself with his agreement.
5. Bhaumik fixed the qrtr driver by stopping the channels during remove. This
patch also got ack from networking maintainer and we decided to take it through
MHI tree (via immutable branch) since we already had a qrtr change.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi.git/log/?h=mhi-ath11k-immutable
* tag 'mhi-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: (30 commits)
mhi: pci_generic: Fix implicit conversion warning
bus: mhi: core: Fix error handling in mhi_register_controller()
bus: mhi: core: Fix device hierarchy
bus: mhi: core: Indexed MHI controller name
net: qrtr: Unprepare MHI channels during remove
bus: mhi: core: Remove MHI event ring IRQ handlers when powering down
bus: mhi: core: Mark and maintain device states early on after power down
bus: mhi: core: Separate system error and power down handling
bus: mhi: core: Check for IRQ availability during registration
bus: mhi: core: Move to an error state on mission mode failure
bus: mhi: core: Use appropriate label in firmware load handler API
bus: mhi: core: Move to an error state on any firmware load failure
bus: mhi: core: Prevent sending multiple RDDM entry callbacks
bus: mhi: core: Move to SYS_ERROR regardless of RDDM capability
bus: mhi: core: Skip device wake in error or shutdown states
bus: mhi: core: Move to using high priority workqueue
bus: mhi: core: Use appropriate names for firmware load functions
bus: mhi: core: Skip RDDM download for unknown execution environment
bus: mhi: core: Rename RDDM download function to use proper words
bus: mhi: core: Remove unused mhi_fw_load_worker() declaration
...
Specify type alignment when declaring linker-section match-table entries
to prevent gcc from increasing alignment and corrupting the various
tables with padding (e.g. timers, irqchips, clocks, reserved memory).
This is specifically needed on x86 where gcc (typically) aligns larger
objects like struct of_device_id with static extent on 32-byte
boundaries which at best prevents matching on anything but the first
entry. Specifying alignment when declaring variables suppresses this
optimisation.
Here's a 64-bit example where all entries are corrupt as 16 bytes of
padding has been inserted before the first entry:
ffffffff8266b4b0 D __clk_of_table
ffffffff8266b4c0 d __of_table_fixed_factor_clk
ffffffff8266b5a0 d __of_table_fixed_clk
ffffffff8266b680 d __clk_of_table_sentinel
And here's a 32-bit example where the 8-byte-aligned table happens to be
placed on a 32-byte boundary so that all but the first entry are corrupt
due to the 28 bytes of padding inserted between entries:
812b3ec0 D __irqchip_of_table
812b3ec0 d __of_table_irqchip1
812b3fa0 d __of_table_irqchip2
812b4080 d __of_table_irqchip3
812b4160 d irqchip_of_match_end
Verified on x86 using gcc-9.3 and gcc-4.9 (which uses 64-byte
alignment), and on arm using gcc-7.2.
Note that there are no in-tree users of these tables on x86 currently
(even if they are included in the image).
Fixes: 54196ccbe0 ("of: consolidate linker section OF match table declarations")
Fixes: f6e916b820 ("irqchip: add basic infrastructure")
Cc: stable <stable@vger.kernel.org> # 3.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the array-of-pointers trick to avoid having gcc mess up
the earlycon array stride, specify type alignment when declaring entries
to prevent gcc from increasing alignment.
This is essentially an alternative (one-line) fix to the problem
addressed by commit dd709e72cb ("earlycon: Use a pointer table to fix
__earlycon_table stride").
gcc can increase the alignment of larger objects with static extent as
an optimisation, but this can be suppressed by using the aligned
attribute when declaring variables.
Note that we have been relying on this behaviour for kernel parameters
for 16 years and it indeed hasn't changed since the introduction of the
aligned attribute in gcc-3.1.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20201123102319.8090-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move mlx5_vdpa IFC header file to the general include folder, so
mlx5_core will be able to reuse it to check if VDPA is supported
prior to creating an auxiliary device.
As part of this move, update the header file name to mlx5 general
naming scheme.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Remove exposed driver version as it was done in other drivers,
so module version will work correctly by displaying the kernel
version for which it is compiled.
And move mlx5_core module name to general include, so auxiliary drivers
will be able to use it as a basis for a name in their device ID tables.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into mlx5-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into driver-core-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason, the original aux bus patch had some really long lines
in a few places, probably due to it being a very long-lived patch in
development by many different people. Fix that up so that the two files
all have the same length lines and function formatting styles.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8oiSFTpYHw1xE/o@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's an effort to move the remove() callback in the driver core to
not return an int, as nothing can be done if this function fails. To
make that effort easier, make the aux bus remove function void to start
with so that no users have to be changed sometime in the future.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8ohB1ks1NK7kPop@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to include slab.h in include/linux/auxiliary_bus.h, as it is not
needed there. Move it to drivers/base/auxiliary.c instead.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8og8xi3WkoYXet9@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set max_busy_timeouts for variants known to support the TOPxx bits in
the SD_OPTION register. The timeout mechanism was running in the
background but not yet properly handled in the driver. So, let the MMC
core know when to not use R1B to avoid unhandled timeouts.
My datasheets for older variants (tmio_mmc.c) suggest that they support
it, too. However, actual bit descriptions are lacking, so I chose an
opt-in approach.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make it possible to retrieve a copy of the psci_0_1_function_ids struct.
This is useful for KVM if it is configured to intercept host's PSCI SMCs.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-7-dbrazdil@google.com
Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
While performing some destructive tests with vfio-ccw, where the
paths to a device are forcible removed and thus the device itself
is unreachable, it is rather easy to end up in an endless loop in
vfio_del_group_dev() due to the lack of a request callback for the
associated device.
In this example, one MDEV (77c) is used by a guest, while another
(77b) is not. The symptom is that the iommu is detached from the
mdev for 77b, but not 77c, until that guest is shutdown:
[ 238.794867] vfio_ccw 0.0.077b: MDEV: Unregistering
[ 238.794996] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: Removing from iommu group 2
[ 238.795001] vfio_mdev 11f2d2bc-4083-431d-a023-eff72715c4f0: MDEV: detaching iommu
[ 238.795036] vfio_ccw 0.0.077c: MDEV: Unregistering
...silence...
Let's wire in the request call back to the mdev device, so that a
device being physically removed from the host can be (gracefully?)
handled by the parent device at the time the device is removed.
Add a message when registering the device if a driver doesn't
provide this callback, so a clue is given that this same loop
may be encountered in a similar situation, and a message when
this occurs instead of the awkward silence noted above.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this. Also we don't do anything with
the value returned so stop it returning anything. For the few drivers
that didn't already print an error message in this patch, add such
a print.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
Use a heap allocated memory for the SPI transfer buffer. Using stack memory
can corrupt stack memory when using DMA on some systems.
This change moves the buffer from the stack of the trigger handler call to
the heap of the buffer of the state struct. The size increases takes into
account the alignment for the timestamp, which is 8 bytes.
The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer
separation of which part of the buffer should be used for TX & RX.
Fixes: af3008485e ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.
Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Background:
Broadcast and multicast packages are enqueued for later processing.
This queue was previously hardcoded to 1000.
This proved insufficient for handling very high packet rates.
This resulted in packet drops for multicast.
While at the same time unicast worked fine.
The change:
This patch make the queue length adjustable to accommodate
for environments with very high multicast packet rate.
But still keeps the default value of 1000 unless specified.
The queue length is specified as a request per macvlan
using the IFLA_MACVLAN_BC_QUEUE_LEN parameter.
The actual used queue length will then be the maximum of
any macvlan connected to the same port. The actual used
queue length for the port can be retrieved (read only)
by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification.
This will be followed up by a patch to iproute2
in order to adjust the parameter from userspace.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement 'unsafe' version of put_compat_sigset()
For the bigendian, use unsafe_put_user() directly
to avoid intermediate copy through the stack.
For the littleendian, use a straight unsafe_copy_to_user().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/537c7082ee309a0bb9c67a50c5d9dd929aedb82d.1597770847.git.christophe.leroy@csgroup.eu
We used LockDoc to derive locking rules for each member
of struct transaction_t.
Based on those results, we extended the existing documentation
by more members of struct transaction_t, and updated the existing
documentation.
Link: https://lore.kernel.org/r/10cfbef1-994c-c604-f8a6-b1042fcc622f@tu-dortmund.de
Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de>
Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The handle_inode_event() interface was added as (quoting comment):
"a simple variant of handle_event() for groups that only have inode
marks and don't have ignore mask".
In other words, all backends except fanotify. The inotify backend
also falls under this category, but because it required extra arguments
it was left out of the initial pass of backends conversion to the
simple interface.
This results in code duplication between the generic helper
fsnotify_handle_event() and the inotify_handle_event() callback
which also happen to be buggy code.
Generalize the handle_inode_event() arguments and add the check for
FS_EXCL_UNLINK flag to the generic helper, so inotify backend could
be converted to use the simple interface.
Link: https://lore.kernel.org/r/20201202120713.702387-2-amir73il@gmail.com
CC: stable@vger.kernel.org
Fixes: b9a1b97725 ("fsnotify: create method handle_inode_event() in fsnotify_operations")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Changeset cd8084f91c ("locking/lockdep: Apply crossrelease to completions")
added a CONFIG_LOCKDEP_COMPLETE (that was later renamed to
CONFIG_LOCKDEP_COMPLETIONS).
Such changeset renamed the init_completion, and add a macro
that would either run a modified version or the original code.
However, such code reported too many false positives. So, it
ended being dropped later on by
changeset e966eaeeb6 ("locking/lockdep: Remove the cross-release locking checks").
Yet, the define remained there as just:
#define init_completion(x) __init_completion(x)
Get rid of the define, and return __init_completion() function
to its original name.
Fixes: e966eaeeb6 ("locking/lockdep: Remove the cross-release locking checks")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/e657bfc533545c185b1c3c55926a449ead56a88b.1606823973.git.mchehab+huawei@kernel.org
