Report the driver name, ASIC ID and the switch name via devlink. This is a
useful information for user space tooling.
Signed-off-by: Kurt Kanzenbach <kurt@kmk-computers.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When adding CONFIG_PCPU_DEV_REFCNT, I forgot that the
initial net device refcount was 0.
When CONFIG_PCPU_DEV_REFCNT is not set, this means
the first dev_hold() triggers an illegal refcount
operation (addition on 0)
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x128/0x1a4
Fix is to change initial (and final) refcount to be 1.
Also add a missing kerneldoc piece, as reported by
Stephen Rothwell.
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <groeck@google.com>
Tested-by: Guenter Roeck <groeck@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-03-22
This series contains updates to ice and iavf drivers.
Haiyue Wang says:
The Intel E810 Series supports a programmable pipeline for a domain
specific protocols classification, for example GTP by Dynamic Device
Personalization (DDP) profile.
The E810 PF has introduced flex-bytes support by ethtool user-def option
allowing for packet deeper matching based on an offset and value for DDP
usage.
For making VF also benefit from this flexible protocol classification,
some new virtchnl messages are defined and handled by PF, so VF can
query this new flow director capability, and use ethtool with extending
the user-def option to configure Rx flow classification.
The new user-def 0xAAAABBBBCCCCDDDD: BBBB is the 2 byte pattern while
AAAA corresponds to its offset in the packet. Similarly DDDD is the 2
byte pattern with CCCC being the corresponding offset. The offset ranges
from 0x0 to 0x1F7 (up to 504 bytes into the packet). The offset starts
from the beginning of the packet.
This feature can be used to allow customers to set flow director rules
for protocols headers that are beyond standard ones supported by
ethtool (e.g. PFCP or GTP-U).
Like for matching GTP-U's TEID value 0x10203040:
ethtool -N ens787f0v0 flow-type udp4 dst-port 2152 \
user-def 0x002e102000303040 action 13
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ptype_all and ptype_base are declared in net/core/dev.c as non-static,
because they are used by net-procfs.c too. However, a "make W=1" build
complains that there was no previous declaration of ptype_all and
ptype_base in a header file, so this way of declaring things constitutes
a violation of coding style.
Let's move the extern declarations of ptype_all and ptype_base to the
linux/netdevice.h file, which is included by net-procfs.c too.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s/unrequired/"not required"/
s/consme/consume/ .....two different places
s/accros/across/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a function to set the dynamic queue limit minimum value.
Some specific drivers might have legitimate reasons to configure
dql.min_limit to a given value. Typically, this is the case when the
PDU of the protocol is smaller than the packet size to used to
carry those frames to the device.
Concrete example: a CAN (Control Area Network) device with an USB 2.0
interface. The PDU of classical CAN protocol are roughly 16 bytes but
the USB packet size (which is used to carry the CAN frames to the
device) might be up to 512 bytes. Wen small traffic burst occurs, BQL
algorithm is not able to immediately adjust and this would result in
having to send many small USB packets (i.e packet of 16 bytes for each
CAN frame). Filling up the USB packet with CAN frames is relatively
fast (small latency issue) but the gain of not having to send several
small USB packets is huge (big throughput increase). In this case,
forcing dql.min_limit to a given value that would allow to stuff the
USB packet is always a win.
This function is to be used by network drivers which are able to prove
through a rationale and through empirical tests on several environment
(with other applications, heavy context switching, virtualization...),
that they constantly reach better performances with a specific
predefined dql.min_limit value with no noticeable latency impact.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Keep track of whether or not there were LSM security context
options passed during mount (ie creation of the superblock).
Then, while deciding if the superblock can be shared for the new
mount, check if the newly passed in LSM security context options
are compatible with the existing superblock's ones by calling
security_sb_mnt_opts_compat().
Previously, with selinux enabled, NFS wasn't able to do the
following 2mounts:
mount -o vers=4.2,sec=sys,context=system_u:object_r:root_t:s0
<serverip>:/ /mnt
mount -o vers=4.2,sec=sys,context=system_u:object_r:swapfile_t:s0
<serverip>:/scratch /scratch
2nd mount would fail with "mount.nfs: an incorrect mount option was
specified" and var log messages would have:
"SElinux: mount invalid. Same superblock, different security
settings for.."
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.
A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The virtual channel is going to be extended to support FDIR and
RSS configure from AVF. New data structures and OP codes will be
added, the patch enable the FDIR part.
To support above advanced AVF feature, we need to figure out
what kind of data structure should be passed from VF to PF to describe
an FDIR rule or RSS config rule. The common part of the requirement is
we need a data structure to represent the input set selection of a rule's
hash key.
An input set selection is a group of fields be selected from one or more
network protocol layers that could be identified as a specific flow.
For example, select dst IP address from an IPv4 header combined with
dst port from the TCP header as the input set for an IPv4/TCP flow.
The patch adds a new data structure virtchnl_proto_hdrs to abstract
a network protocol headers group which is composed of layers of network
protocol header(virtchnl_proto_hdr).
A protocol header contains a 32 bits mask (field_selector) to describe
which fields are selected as input sets, as well as a header type
(enum virtchnl_proto_hdr_type). Each bit is mapped to a field in
enum virtchnl_proto_hdr_field guided by its header type.
+------------+-----------+------------------------------+
| | Proto Hdr | Header Type A |
| | +------------------------------+
| | | BIT 31 | ... | BIT 1 | BIT 0 |
| |-----------+------------------------------+
|Proto Hdrs | Proto Hdr | Header Type B |
| | +------------------------------+
| | | BIT 31 | ... | BIT 1 | BIT 0 |
| |-----------+------------------------------+
| | Proto Hdr | Header Type C |
| | +------------------------------+
| | | BIT 31 | ... | BIT 1 | BIT 0 |
| |-----------+------------------------------+
| | .... |
+-------------------------------------------------------+
All fields in enum virtchnl_proto_hdr_fields are grouped with header type
and the value of the first field of a header type is always 32 aligned.
enum proto_hdr_type {
header_type_A = 0;
header_type_B = 1;
....
}
enum proto_hdr_field {
/* header type A */
header_A_field_0 = 0,
header_A_field_1 = 1,
header_A_field_2 = 2,
header_A_field_3 = 3,
/* header type B */
header_B_field_0 = 32, // = header_type_B << 5
header_B_field_0 = 33,
header_B_field_0 = 34
header_B_field_0 = 35,
....
};
So we have:
proto_hdr_type = proto_hdr_field / 32
bit offset = proto_hdr_field % 32
To simply the protocol header's operations, couple help macros are added.
For example, to select src IP and dst port as input set for an IPv4/UDP
flow.
we have:
struct virtchnl_proto_hdr hdr[2];
VIRTCHNL_SET_PROTO_HDR_TYPE(&hdr[0], IPV4)
VIRTCHNL_ADD_PROTO_HDR_FIELD(&hdr[0], IPV4, SRC)
VIRTCHNL_SET_PROTO_HDR_TYPE(&hdr[1], UDP)
VIRTCHNL_ADD_PROTO_HDR_FIELD(&hdr[1], UDP, DST)
The byte array is used to store the protocol header of a training package.
The byte array must be network order.
The patch added virtual channel support for iAVF FDIR add/validate/delete
filter. iAVF FDIR is Flow Director for Intel Adaptive Virtual Function
which can direct Ethernet packets to the queues of the Network Interface
Card. Add/delete command is adding or deleting one rule for each virtual
channel message, while validate command is just verifying if this rule
is valid without any other operations.
To add or delete one rule, driver needs to config TCAM and Profile,
build training packets which contains the input set value, and send
the training packets through FDIR Tx queue. In addition, driver needs to
manage the software context to avoid adding duplicated rules, deleting
non-existent rule, input set conflicts and other invalid cases.
NOTE:
Supported pattern/actions and their parse functions are not be included in
this patch, they will be added in a separate one.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Signed-off-by: Simei Su <simei.su@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Chen Bo <BoX.C.Chen@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prepare svc_xprt_received() to be called from transport code instead
of from generic RPC server code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently svc_rdma_sendto() migrates xdr_buf pages into a separate
page list and NULLs out a bunch of entries in rq_pages while the
pages are under I/O. The Send completion handler then frees those
pages later.
Instead, let's wait for the Send completion, then handle page
releasing in the nfsd thread. I'd like to avoid the cost of 250+
put_page() calls in the Send completion handler, which is single-
threaded.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Refactor a bit of commonly used logic so that every site that wants
a close deferred to an nfsd thread does all the right things
(set_bit(XPT_CLOSE) then enqueue).
Also, once XPT_CLOSE is set on a transport, it is never cleared. If
XPT_CLOSE is already set, then the close is already being handled
and the enqueue can be skipped.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Post more Receives when the number of pending Receives drops below
a water mark. The batch mechanism is disabled if the underlying
device cannot support a reasonably-sized Receive Queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Commit 24f6b6036c ("dm table: fix zoned iterate_devices based device
capability checks") triggered dm table load failure when dm-zoned device
is set up for zoned block devices and a regular device for cache.
The commit inverted logic of two callback functions for iterate_devices:
device_is_zoned_model() and device_matches_zone_sectors(). The logic of
device_is_zoned_model() was inverted then all destination devices of all
targets in dm table are required to have the expected zoned model. This
is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices
since each target has only one destination device. However, this results
in failure for dm-zoned with regular cache device since that target has
both regular block device and zoned block devices.
As for device_matches_zone_sectors(), the commit inverted the logic to
require all zoned block devices in each target have the specified
zone_sectors. This check also fails for regular block device which does
not have zones.
To avoid the check failures, fix the zone model check and the zone
sectors check. For zone model check, introduce the new feature flag
DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the
target has this flag, allow it to have destination devices with any
zoned model. For zone sectors check, skip the check if the destination
device is not a zoned block device. Also add comments and improve an
error message to clarify expectations to the two checks.
Fixes: 24f6b6036c ("dm table: fix zoned iterate_devices based device capability checks")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
There is a need for a non-blocking polling interface for RCU grace
periods, so this commit supplies start_poll_synchronize_rcu() and
poll_state_synchronize_rcu() for this purpose. Note that the existing
get_state_synchronize_rcu() may be used if future grace periods are
inevitable (perhaps due to a later call_rcu() invocation). The new
start_poll_synchronize_rcu() is to be used if future grace periods
might not otherwise happen. Finally, poll_state_synchronize_rcu()
provides a lockless check for a grace period having elapsed since
the corresponding call to either of the get_state_synchronize_rcu()
or start_poll_synchronize_rcu().
As with get_state_synchronize_rcu(), the return value from either
get_state_synchronize_rcu() or start_poll_synchronize_rcu() is passed in
to a later call to either poll_state_synchronize_rcu() or the existing
(might_sleep) cond_synchronize_rcu().
[ paulmck: Remove redundant smp_mb() per Frederic Weisbecker feedback. ]
[ Update poll_state_synchronize_rcu() docbook per Frederic Weisbecker feedback. ]
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is a slew of defines, structs and enums and even a
function call only relevant for the charging code that
still lives in <linux/mfd/abx500.h>. Push it down to the
"ab8500-bm.h" header in the power supply subsystem where
it is actually used.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The charging algorithm header is only used locally in the
power supply subsystem so push this down into
drivers/power/supply and rename from the confusing
"ux500_chargalg.h" to "ab8500-chargalg.h" for clarity:
it is only used with the AB8500.
This is another remnant of non-DT code needing to pass
data from boardfiles, which we don't do anymore.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The global definition of platform data for the battery
management code has no utility after the OF conversion,
move the <linux/mfd/abx500/ab8500-bm.h> to be a local
file in drivers/power/supply and stop defining the
platform data in drivers/power/supply/ab8500_bmdata.c
and broadcast to the kernel only to have it assigned
as platform data to the MFD cells and then picked back
into the same subsystem that defined it in the first
place. This kills off a layer of indirection.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
NFSD initializes an encode xdr_stream only after the RPC layer has
already inserted the RPC Reply header. Thus it behaves differently
than xdr_init_encode does, which assumes the passed-in xdr_buf is
entirely devoid of content.
nfs4proc.c has this server-side stream initialization helper, but
it is visible only to the NFSv4 code. Move this helper to a place
that can be accessed by NFSv2 and NFSv3 server XDR functions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Building with W=1 shows a few warnings for an empty macro:
drivers/gpu/drm/qxl/qxl_drv.c: In function 'qxl_pci_probe':
drivers/gpu/drm/qxl/qxl_drv.c:131:50: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
131 | vga_put(pdev, VGA_RSRC_LEGACY_IO);
| ^
drivers/gpu/drm/qxl/qxl_drv.c: In function 'qxl_pci_remove':
drivers/gpu/drm/qxl/qxl_drv.c:159:50: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
159 | vga_put(pdev, VGA_RSRC_LEGACY_IO);
Change this to an inline function to make it more robust and avoid
the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210322105307.1291840-2-arnd@kernel.org
Currently quirks are only allowed for Slave devices. This patch
describes the need for two quirks at the Master level.
a) bus clash
The SoundWire specification allows a Slave device to report a bus clash
with the in-band interrupt mechanism when it detects a conflict while
driving a bitSlot it owns. This can be a symptom of an electrical conflict
or a programming error, and it's vital to detect reliably.
Unfortunately, on some platforms, bus clashes are randomly reported by
Slave devices after a bus reset, with an interrupt status set even before
the bus clash interrupt is enabled. These initial spurious interrupts are
not relevant and should optionally be filtered out, while leaving the
interrupt mechanism enabled to detect 'true' issues.
This patch suggests the addition of a Master level quirk to discard such
interrupts. The quirk should in theory have been added at the Slave level,
but since the problem was detected with different generations of Slave
devices it's hard to point to a specific IP. The problem might also be
board-dependent and hence dealing with a Master quirk is simpler.
b) parity
Additional tests on a new platform with the Maxim 98373 amplifier
showed a rare case where the parity interrupt is also thrown on
startup, at the same time as bus clashes. This issue only seems to
happen infrequently and was only observed during suspend-resume stress
tests while audio is streaming. We could make the problem go away by
adding a Slave-level quirk, but there is no evidence that the issue is
actually a Slave problem: the parity is provided by the Master, which
could also set an invalid parity in corner cases.
BugLink: https://github.com/thesofproject/linux/issues/2578
BugLink: https://github.com/thesofproject/linux/issues/2533
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302082720.12322-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Platform firmware may have incorrect _ADR values causing the driver
probes to fail. Add the override_ops, which when configured will allow
for quirks based on DMI etc to override the addr values.
Co-developed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210302075105.11515-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
pwmchip_add() only calls pwmchip_add_with_polarity() and nothing else. All
other users of pwmchip_add_with_polarity() are gone. So drop
pwmchip_add_with_polarity() and move the code instead to pwmchip_add().
The initial assignment to pwm->state.polarity is dropped. In every correct
usage of the PWM API this value is overwritten later anyhow.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The imx3 camera driver has been removed a long time ago, so get
rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The imx27/imx25 camera driver has been removed a long time ago,
so get rid of this unused header file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBXwRseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGX80H/2qQ49e2lbOfIqdR
CBThtgg89QmN9WPTfVhwB6b4vejB7kIiIpOPyJVkaio6lVe8Ewhl064fnGHwXm39
vPy0ZVAB96oaKaki6qi1k7jhCAMpl/vXf1RDe5PaEKPwp3Lr81BlY6dcTPbjxkFP
Uw+uC3iRQnT8msSqA1vnhbDl9w6jfmuxX45Eo9NWGz0hDCpZNOEt2oSo/OcXTH4k
c91FiW8Qv9uZX2tV4VSqFQgVPfneA+OWXMpjMg6kfK3jOJ5cZwmFGAa8ByqWACH/
U9OODYQCsyX5ZM11g7MOt7Iv+YSU8OA0We8KDN4cRZobrCHF0Txp3ZTSPjb/xHE3
9nUM50I=
=a6Go
-----END PGP SIGNATURE-----
Merge 5.12-rc4 into usb-next
We need the usb/thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.
Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.
Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.
This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.
On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.
To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.
This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.
Cc: linux-acpi@vger.kernel.org
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix ~42 single-word typos in scheduler code comments.
We have accumulated a few fun ones over the years. :-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: linux-kernel@vger.kernel.org
Add support for TI BQ78Z100, I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.
The patch was tested with BQ78Z100 equipment.
CASE I: Discharging:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Discharging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3386000
POWER_SUPPLY_CURRENT_NOW=-5000
POWER_SUPPLY_CAPACITY=27
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=269
POWER_SUPPLY_TIME_TO_EMPTY_NOW=1249920
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_NOW=1736000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_POWER_AVG=-20000
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
CASE II : No discharging current:
POWER_SUPPLY_NAME=bq78z100-0
POWER_SUPPLY_STATUS=Not charging
POWER_SUPPLY_PRESENT=1
POWER_SUPPLY_VOLTAGE_NOW=3386000
POWER_SUPPLY_CURRENT_NOW=0
POWER_SUPPLY_CAPACITY=27
POWER_SUPPLY_CAPACITY_LEVEL=Normal
POWER_SUPPLY_TEMP=270
POWER_SUPPLY_TECHNOLOGY=Li-ion
POWER_SUPPLY_CHARGE_FULL=6494000
POWER_SUPPLY_CHARGE_NOW=1734000
POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
POWER_SUPPLY_CYCLE_COUNT=1
POWER_SUPPLY_POWER_AVG=0
POWER_SUPPLY_HEALTH=Good
POWER_SUPPLY_MANUFACTURER=Texas Instruments
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc8ag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykrHwCfdSigXZ7IFgVcN+428ml0Ko/yG4AAn2Hkv2or
+ayuj/5GM/9I6Bt8aryk
=zzfw
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported,
- use the correct alignment for literal EFI GUIDs,
- fix a use after unmap issue in the memreserve code
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=la6v
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
devicetree-node lookups.
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall number.
Split in a 4-patches set to avoid kABI breakage when backporting to dead
kernels.
-----BEGIN PGP SIGNATURE-----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=WfC4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-20
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).
The main changes are:
1) Use correct nops in fexit trampoline, from Stanislav.
2) Fix BTF dump, from Jean-Philippe.
3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=aPxz
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Quieter week this time, which was both expected and desired. About
half of the below is fixes for this release, the other half are just
fixes in general. In detail:
- Fix the freezing of IO threads, by making the freezer not send them
fake signals. Make them freezable by default.
- Like we did for personalities, move the buffer IDR to xarray. Kills
some code and avoids a use-after-free on teardown.
- SQPOLL cleanups and fixes (Pavel)
- Fix linked timeout race (Pavel)
- Fix potential completion post use-after-free (Pavel)
- Cleanup and move internal structures outside of general kernel view
(Stefan)
- Use MSG_SIGNAL for send/recv from io_uring (Stefan)"
* tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block:
io_uring: don't leak creds on SQO attach error
io_uring: use typesafe pointers in io_uring_task
io_uring: remove structures from include/linux/io_uring.h
io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls
io_uring: fix sqpoll cancellation via task_work
io_uring: add generic callback_head helpers
io_uring: fix concurrent parking
io_uring: halt SQO submission on ctx exit
io_uring: replace sqd rw_semaphore with mutex
io_uring: fix complete_post use ctx after free
io_uring: fix ->flags races by linked timeouts
io_uring: convert io_buffer_idr to XArray
io_uring: allow IO worker threads to be frozen
kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing
I was working on a syzbot issue, claiming one device could not be
dismantled because its refcount was -1
unregister_netdevice: waiting for sit0 to become free. Usage count = -1
It would be nice if syzbot could trigger a warning at the time
this reference count became negative.
This patch adds CONFIG_PCPU_DEV_REFCNT options which defaults
to per cpu variables (as before this patch) on SMP builds.
v2: free_dev label in alloc_netdev_mqs() is moved to avoid
a compiler warning (-Wunused-label), as reported
by kernel test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- anothing missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
-----BEGIN PGP SIGNATURE-----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=a7TN
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent
Pull EFI fixes from Ard Biesheuvel:
"- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
