Userspace may leave predication enabled upon return from the batch
buffer, which has the consequent of preventing all operation from the
ring from being executed, including all the synchronisation, coherency
control, arbitration and user signaling. This is more than just a local
gpu hang in one client, as the user has the ability to prevent the
kernel from applying critical workarounds and can cause a full GT reset.
We could simply execute MI_SET_PREDICATE upon return from the user
batch, but this has the repercussion of modifying the user's context
state. Instead, we opt to execute a fixup batch which by mixing
predicated operations can determine the state of the
SET_PREDICATE_RESULT register and restore it prior to the next userspace
batch. This allows us to protect the kernel's ring without changing the
uABI.
Suggested-by: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-4-ramalingam.c@intel.com
When predication is enabled all commands baring a few (such as MI_BB_END)
are nop'ed. If we accidentally enable predication while poisoning the
context, not only is the rest of the poisoning skipped (thus disabling
the test), but the closing instructions of the poison request are
nop'ed. Not only do we then not signal the waiting context, but we even
prevent re-enabling arbitration and the GPU will not perform a context
switch at the end of the request.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Suggested-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-3-ramalingam.c@intel.com
When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+
devices, HW does not care about certain register address offsets, but
instead check the following for valid address ranges on specific engines:
RCS && CCS: BITS(0 - 10)
BCS: BITS(0 - 11)
VECS && VCS: BITS(0 - 13)
Also, tgl+ now support relative addressing for BCS engine - So, this
patch fixes issue with live_gt_lrc selftest that is failing where there is
mismatch between LRC register layout generated during init and HW
default register offsets.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-2-ramalingam.c@intel.com
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
The following is an automated git shortlog grouped by driver:
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYmwsmgAKCRD7cr9lmVa5
zEYPAP4q31AbTJHk6Fs1A79esVSo+DZSkZSzbk/n8Vr3oYG56gD/dVu5EmLNKPHU
6o5+BvdXqjHrymihHasdyD9YqI30zwM=
=MIEU
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v5.19-1
* Introduce helpers to iterate over GPIO chip nodes and covert some drivers
gpiolib:
- Introduce a helper to get first GPIO controller node
- Introduce gpiochip_node_count() helper
- Introduce for_each_gpiochip_node() loop helper
pinctrl:
- meson: Replace custom code by gpiochip_node_count() call
- meson: Enable COMPILE_TEST
- meson: Rename REG_* to MESON_REG_*
- armada-37xx: Reuse GPIO fwnode in armada_37xx_irqchip_register()
- armada-37xx: Switch to use fwnode instead of of_node
- samsung: Switch to use for_each_gpiochip_node() helper
- samsung: Drop redundant node parameter in samsung_banks_of_node_get()
- npcm7xx: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Switch to use for_each_gpiochip_node() helper
- renesas: rza1: Replace custom code by gpiochip_node_count() call
- stm32: Switch to use for_each_gpiochip_node() helper
- stm32: Replace custom code by gpiochip_node_count() call
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1.
Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.
Fixes: 78edeb0803 ("clk: imx: scu: add runtime pm support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220425011117.25093-1-linmq006@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
pwmchip_add() unconditionally assigns the base ID dynamically. Commit
f9a8ee8c8b ("pwm: Always allocate PWM chip base ID dynamically")
dropped all base assignment from drivers under drivers/pwm/. It missed
this driver. Fix that.
Fixes: f9a8ee8c8b ("pwm: Always allocate PWM chip base ID dynamically")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Gpiolib interprets the elements of "gpio-reserved-ranges" as "start,size"
because it clears "size" bits starting from the "start" bit in the according
bitmap. So it has to use "greater" instead of "greater or equal" when performs
bounds check to make sure that GPIOs are in the available range.
Previous implementation skipped ranges that include the last GPIO in
the range.
I wrote the mail to the maintainers
(https://lore.kernel.org/linux-gpio/20220412115554.159435-1-andrei.lalaev@emlid.com/T/#u)
of the questioned DTSes (because I couldn't understand how the maintainers
interpreted this property), but I haven't received a response.
Since the questioned DTSes use "gpio-reserved-ranges = <0 4>"
(i.e., the beginning of the range), this patch doesn't affect these DTSes at all.
TBH this patch doesn't break any existing DTSes because none of them
reserve gpios at the end of range.
Fixes: 726cb3ba49 ("gpiolib: Support 'gpio-reserved-ranges' property")
Signed-off-by: Andrei Lalaev <andrei.lalaev@emlid.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The "Extended Address Register" is winbond specific. If the flash is
larger than 16MiB and is used in 3 byte address mode, it is used to set
the remaining address bits. Move the write_ear() function, the opcode
macros and the spimem op template into the winbond module and rename
them accordingly.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220429100153.2338501-1-michael@walle.cc
max field holds the largest slab order that was ever used for a slab cache.
But it's unused now. Remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220429090545.33413-1-linmiaohe@huawei.com
Add a boilerplate test loop to run all tests in
vrf_strict_mode_test.sh. Add a -t flag that allows a selected test to
run. Remove the vrf_strict_mode_tests function which is now unused.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220429164658.GA656707@jaehee-ThinkPad-X1-Extreme
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The comment next to the __assume_kmalloc_alignment definition is not
precise: kmalloc relies on kmem_cache_alloc, so kmalloc technically returns
pointers aligned to both ARCH_KMALLOC_MINALIGN and ARCH_SLAB_MINALIGN,
not only to ARCH_KMALLOC_MINALIGN.
(See create_kmalloc_cache()->create_boot_cache()->calculate_alignment()
for SLAB and SLUB and __do_kmalloc_node() for SLOB.)
Clarify the comment.
The assumption specified by __assume_kmalloc_alignment is still correct,
although it can be made stronger. I'll leave this to a separate patch.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/84d8142747230f2015eaf9705ee7c2e1a9f56596.1651161548.git.andreyknvl@google.com
The comment next to the ARCH_KMALLOC_MINALIGN definition says that
ARCH_KMALLOC_MINALIGN can be defined in arch headers. This is incorrect:
it's actually ARCH_DMA_MINALIGN that can be defined there.
Fix the comment.
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/fe1ca7a25a054b61d1038686d07569416e287e7b.1651161548.git.andreyknvl@google.com
Since version 5.13, the standard syscon bindings have been added
to all clps711x DT nodes, so we can now use the more general
syscon_regmap_lookup_by_phandle function to get the syscon pointer.
This patch removes the usage of the syscon_regmap_lookup_by_compatible
function as it is no longer used in the driver.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Using compound literals for initialization can be tricky. Lacking a
const qualifier, they won't end up in rodata, which is probably not
expected or intended. Add const to move a whopping 136 initializers to
rodata.
Compare:
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.rodata.*__compound_literal"
$ objdump --syms drivers/gpu/drm/i915/display/intel_display_power_map.o | grep "\.data.*__compound_literal"
Before and after the change.
Fixes: c32ffce42a ("drm/i915: Convert the power well descriptor domain mask to an array of domains")
Fixes: 4a845ff0c0 ("drm/i915: Simplify power well definitions by adding power well instances")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429142140.2671828-1-jani.nikula@intel.com
This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication.
- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This boards are based on STM32MP151AAD3 and use 10BaseT1L for
communication.
- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Peilin Ye says:
====================
devices always NETIF_F_LLTX
v1: https://lore.kernel.org/netdev/cover.1650580763.git.peilin.ye@bytedance.com/
change since v1:
- deleted "depends on patch..." in [1/2]'s commit message
This patchset depends on these fixes [1], which has been merged into
net-next. Since o_seqno is now atomic_t, we can always turn on
NETIF_F_LLTX for [IP6]GRE[TAP] devices, since we no longer need the TX
lock (&txq->_xmit_lock).
We could probably do the same thing to [IP6]ERSPAN devices as well, but
I'm not familiar with them yet. For example, ERSPAN devices are
initialized as |= GRE_FEATURES in erspan_tunnel_init(), but I don't see
IP6ERSPAN devices being initialized as |= GRE6_FEATURES. Where should we
initialize IP6ERSPAN devices' ->features? Please suggest if I'm missing
something, thanks!
[1] https://lore.kernel.org/netdev/cover.1650575919.git.peilin.ye@bytedance.com/
====================
Link: https://lore.kernel.org/r/cover.1651207788.git.peilin.ye@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and
always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need
the TX lock (&txq->_xmit_lock).
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and
always mark GRE[TAP] devices as NETIF_F_LLTX, since we no longer need
the TX lock (&txq->_xmit_lock).
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Correct blank lines to precesily separate entries.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The bindings for DH STM32MP1 SoM boards allows invalid combinations,
e.g. st,stm32mp153 SoC on a dh,stm32mp157c-dhcom-som SoM.
Split the enums to properly match valid setups.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Addresses: warning: Local variable 'mask' shadows outer variable
Remove extra variable declaration and switch the bit mask assignment to use
BIT_ULL() while at it.
Fixes: 522e92743b ("x86/fpu: Deduplicate copy_uabi_from_user/kernel_to_xstate()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/202204262032.jFYKit5j-lkp@intel.com
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warnings:
| drivers/net/can/ctucanfd/ctucanfd_platform.c:67:2-9:
| line 67 is redundant because platform_get_irq() already prints an error.
Link: https://lore.kernel.org/all/20220421203242.7335-1-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Pave Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Defining local versions of NAPI_POLL_WEIGHT with the same values in
the drivers just makes refactoring harder.
Link: https://lore.kernel.org/all/20220429174446.196655-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The utilization of arch_scale_freq_tick() for CPU frequency readouts is
incomplete as it failed to move the function prototype and the define
out of the CONFIG_SMP && CONFIG_X86_64 #ifdef.
Make them unconditionally available.
Fixes: bb6e89df90 ("x86/aperfmperf: Make parts of the frequency invariance code unconditional")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/202205010106.06xRBR2C-lkp@intel.com
drm_gem_plane_helper_prepare_fb() was using
drm_atomic_set_fence_for_plane() which ignores all implicit fences when an
explicit fence is already set. That's rather unfortunate when the fb still
has a kernel fence we need to wait for to avoid presenting garbage on the
screen.
So instead update the fence in the plane state directly. While at it also
take care of all potential GEM objects and not just the first one.
Also remove the now unused drm_atomic_set_fence_for_plane() function, new
drivers should probably use the atomic helpers directly.
v2: improve kerneldoc, use local variable and num_planes, WARN_ON_ONCE
on missing planes.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220429134230.24334-1-christian.koenig@amd.com
Don't use numeric labels for long jumps, use named local labels instead.
Avoid conditional label definition.
No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When fast_store_prohibited needs to go to the C-level exception handler
it leaves TLB entry that caused page fault in the TLB. If the faulting
task gets switched to a different CPU and completes page table update
there the TLB entry will get out of sync with the page table which may
cause a livelock on access to that page.
Invalidate faulting TLB entry on a slow path exit from the
fast_store_prohibited.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Secondary reset vector is defined, compiled and used when
CONFIG_SECONDARY_RESET_VECTOR is enabled, not only on SMP.
Make declarations of _SecondaryResetVector_text_* symbols available
accordingly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When irq-xtensa-mx chip is used in non-SMP configuration its
irq_set_affinity callback is not called leaving IRQ affinity set empty.
As a result IRQ delivery does not work in that configuration.
Initialize IRQ affinity of the xtensa MX interrupt distributor to CPU 0
for all external IRQ lines.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa kernels successfully build and run with
CONFIG_DEBUG_VM_PGTABLE=y, enable arch support for it.
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Current coprocessor support on xtensa only works correctly on
uniprocessor configurations. Make it work on SMP too and keep it lazy.
Make coprocessor_owner array per-CPU and move it to struct exc_table for
easy access from the fast_coprocessor exception handler. Allow task to
have live coprocessors only on single CPU, record this CPU number in the
struct thread_info::cp_owner_cpu. Change struct thread_info::cpenable
meaning to be 'coprocessors live on cp_owner_cpu'.
Introduce C-level coprocessor exception handler that flushes and
releases live coprocessors of the task taking 'coprocessor disabled'
exception and call it from the fast_coprocessor handler when the task
has live coprocessors on other CPU.
Make coprocessor_flush_all and coprocessor_release_all work correctly
when called from any CPU by sending IPI to the cp_owner_cpu. Add
function coprocessor_flush_release_all to do flush followed by release
atomically. Add function local_coprocessors_flush_release_all to flush
and release all coprocessors on the local CPU and use it to flush
coprocessor contexts from the CPU that goes offline.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
coprocessor_flush is an ordinary function, it can use all registers.
Don't reserve stack frame for it and use a7 to preserve a0 around the
context saving call.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Both tables share the same offset field but the different function
pointers. Merge them into single table with 3-element entries to reduce
code and data duplication.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
