The clock register definitions are now used (almost) exclusively in the
clk driver, and that relies on no other mach/*.h header files any more.
Remove the dependency on mach/pxa*-regs.h by addressing the registers
as offsets from a void __iomem * pointer, which is either passed from
a board file, or (for the moment) ioremapped at boot time from a hardcoded
address in case of DT (this should be moved into the DT of course).
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The get_sdram_rows() and get_memclkdiv() helpers need smemc
register that are separate from the clk registers, move
them out of the clk driver, and use an extern declaration
instead.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/lkml/87pnielzo4.fsf@belgarion.home/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver needs some low-level register access for setting
the core and bus frequencies. These registers are owned
by the clk driver, so move the low-level access into that
driver with a slightly higher-level interface and avoid
any machine header file dependencies.
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
get_clk_frequency_khz() is not a proper name for a global function,
and there is only one caller.
Convert viper to use the properly namespaced
pxa25x_get_clk_frequency_khz() and remove the other references.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rather than poking at the smemc registers directly from the
pcmcia/pxa2xx_base driver, move those bits into machine file
to have a cleaner interface.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lore.kernel.org/lkml/87d0egjzxk.fsf@belgarion.home/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid dereferencing hardwired constant pointers from a global header
file, change the driver to use devm_platform_ioremap_resource for getting
an __iomem pointer, and then using readl/writel on that.
Each pointer dereference gets changed by a search&replace, which leads
to a few overlong lines, but seems less risky than trying to clean up
the code at the same time.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid dereferencing hardwired constant pointers from a global header
file, change the driver to use devm_platform_ioremap_resource for getting
an __iomem pointer, and then using readl/writel on that.
Each pointer dereference gets changed by a search&replace, which leads
to a few overlong lines, but seems less risky than trying to clean up
the code at the same time.
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver currently takes the hardwired FIFO address from
a header file that we want to eliminate. Change it to use
the mmio resource instead and stop including the here.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that we are using oneshot threaded IRQ this method is not used anymore.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
[arnd: add the db1300 change as well]
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Instead of manually disabling and enabling interrupts and scheduling work
to access the device, let's use threaded oneshot interrupt handler. It
simplifies things.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To avoid a dependency on the pxa platform header files with
hardcoded registers, change the driver to call a wrapper
in the pxa2xx-ac97-lib that encapsulates all the other
ac97 stuff.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-input@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The two drivers are almost identical and can work on a variety
of hardware in principle. The mainstone driver supports additional
hardware, and the zylonite driver has a few cleanup patches.
Sync the two by adding the zylonite changes into the mainstone
one, and checking for the zylonite board to order to keep the
default behavior (interrupt enabled) there.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are two different ways of flushing the ac97 queue
in this driver, selected by a compile time option.
Change this to a runtime selection to make it work when both
are enabled.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-input@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mach/mfp.h header is only used by this one driver
for hardcoded gpio numbers. Change that to use a lookup
table instead.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The magician audio driver creates a codec device and gets
data from a board specific header file, both of which is
a bit suspicious. Move these into the board file itself,
using a gpio lookup table.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The audio device is allocated by the audio driver, and it uses a gpio
number from the mach/z2.h header file.
Change it to use a gpio lookup table for the device allocated by the
driver to keep the header file local to the machine.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The three eseries machines have very similar drivers for audio, all
using the mach/eseries-gpio.h header for finding the gpio numbers.
Change these to use gpio descriptors to avoid the header file
dependency.
I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for
consistency here.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The audio driver should not use a hardwired gpio number
from the header. Change it to use a lookup table.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Lubbock is the only machine that has three IRQs for the UDC.
These are currently hardcoded in the driver based on a
machine header file.
Change this to use platform device resources as we use for
the generic IRQ anyway.
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The audio driver should not use a hardwired gpio number
from the header. Change it to use a lookup table.
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Paul Parsons <lost.distance@yahoo.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The audio driver should not use a hardwired gpio number
from the header. Change it to use a lookup table.
Acked-by: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The poodle audio driver shows its age by using a custom
gpio api for the "locomo" support chip.
In a perfect world, this would get converted to use gpiolib
and a gpio lookup table.
As the world is not perfect, just pass all the required data
in a custom platform_data structure. to avoid the globally
visible mach/poodle.h header.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Tosa device (Sharp SL-6000) has a mishmash driver set-up
for the Toshiba TC6393xb MFD that includes a battery charger
and touchscreen and has some kind of relationship to the SoC
sound driver for the AC97 codec. Other devices define a chip
like this but seem only half-implemented, not really handling
battery charging etc.
This patch switches the Toshiba MFD device to provide GPIO
descriptors to the battery charger and SoC codec. As a result
some descriptors need to be moved out of the Tosa boardfile
and new one added: all SoC GPIO resources to these drivers
now comes from the main boardfile, while the MFD provide
GPIOs for its portions.
As a result we can request one GPIO from our own GPIO chip
and drop two hairy callbacks into the board file.
This platform badly needs to have its drivers split up and
converted to device tree probing to handle this quite complex
relationship in an orderly manner. I just do my best in solving
the GPIO descriptor part of the puzzle. Please don't ask me
to fix everything that is wrong with these driver to todays
standards, I am just trying to fix one aspect. I do try to
use modern devres resource management and handle deferred
probe using new functions where appropriate.
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Dirk Opfer <dirk@opfer-online.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For the past several releases I have been assisting Rob by writing,
collecting, testing and integrating patches for non-GPU and non-core
parts of MSM DRM driver, while Rob is more interested in improving the
GPU-related part. Let's note this in the MAINTAINERS file.
While we are at it, per Rob's suggestion let's also promote Abhinav
Kumar to M: (as he is actively working on the driver) and switch Sean
Paul to R: (since he isn't doing much on msm these days).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/20220429215324.3729441-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now arm64 has added support for "crashkernel=X,high" and
"crashkernel=Y,low". Unlike x86, crash low memory is not allocated if
"crashkernel=Y,low" is not specified.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-7-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When "crashkernel=X,high" is used, there may be two crash regions:
high=crashk_res and low=crashk_low_res. But now the syscall
kexec_file_load() only add crashk_res into "linux,usable-memory-range",
this may cause the second kernel to have no available dma memory.
Fix it like kexec-tools does for option -c, add both 'high' and 'low'
regions into the dtb.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-6-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When reserving crashkernel in high memory, some low memory is reserved
for crash dump kernel devices and never mapped by the first kernel.
This memory range is advertised to crash dump kernel via DT property
under /chosen,
linux,usable-memory-range = <BASE1 SIZE1 [BASE2 SIZE2]>
We reused the DT property linux,usable-memory-range and made the low
memory region as the second range "BASE2 SIZE2", which keeps compatibility
with existing user-space and older kdump kernels.
Crash dump kernel reads this property at boot time and call memblock_add()
to add the low memory region after memblock_cap_memory_range() has been
called.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-5-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are following issues in arm64 kdump:
1. We use crashkernel=X to reserve crashkernel in DMA zone, which
will fail when there is not enough low memory.
2. If reserving crashkernel above DMA zone, in this case, crash dump
kernel will fail to boot because there is no low memory available
for allocation.
To solve these issues, introduce crashkernel=X,[high,low].
The "crashkernel=X,high" is used to select a region above DMA zone, and
the "crashkernel=Y,low" is used to allocate specified size low memory.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20220506114402.365-4-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
insert_resource() traverses the subtree layer by layer from the root node
until a proper location is found. Compared with request_resource(), the
parent node does not need to be determined in advance.
In addition, move the insertion of node 'crashk_res' into function
reserve_crashkernel() to make the associated code close together.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-3-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
According to the current crashkernel=Y,low support in other ARCHes, it's
an optional command-line option. When it doesn't exist, kernel will try
to allocate minimum required memory below 4G automatically.
However, __parse_crashkernel() returns '-EINVAL' for all error cases. It
can't distinguish the nonexistent option from invalid option.
Change __parse_crashkernel() to return '-ENOENT' for the nonexistent option
case. With this change, crashkernel,low memory will take the default
value if crashkernel=,low is not specified; while crashkernel reservation
will fail and bail out if an invalid option is specified.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Link: https://lore.kernel.org/r/20220506114402.365-2-thunder.leizhen@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Ensure that the gssproxy client connects to the server from the gssproxy
daemon process context so that the AF_LOCAL socket connection is done
using the correct path and namespaces.
Fixes: 1d658336b0 ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This reverts commit 892de36fd4.
The gssproxy server is unresponsive when it calls into the kernel to
start the upcall service, so it will not reply to our RPC ping at all.
Reported-by: "J.Bruce Fields" <bfields@fieldses.org>
Fixes: 892de36fd4 ("SUNRPC: Ensure gss-proxy connects on setup")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
new_symbol() does two things; allocate a new symbol and register it
to the hash table.
Using a separate function for each is easier to understand.
Replace new_symbol() with hash_add_symbol(). Remove the second parameter
of alloc_symbol().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, sym_add_exported() does not allocate a symbol if the same
name symbol already exists in the hash table.
This does not reflect the real use cases. You can let an external
module override the in-tree one. In this case, the external module
will export the same name symbols as the in-tree one. However,
modpost simply ignores those symbols, then Module.symvers for the
external module loses its symbols.
sym_add_exported() should allocate a new symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This is currently a warning, but I think modpost should stop building
in this case.
If the same symbol is exported multiple times and we let it keep going,
the sanity check becomes difficult.
Only the legitimate case is that an external module overrides the
corresponding in-tree module to provide a different implementation
with the same interface.
Also, there exists an upstream example that exploits this feature.
$ make M=tools/testing/nvdimm
... builds tools/testing/nvdimm/libnvdimm.ko. This is a mocked module
that overrides the symbols from drivers/nvdimm/libnvdimm.ko.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
modpost dumps the exported symbols into Module.symvers, but currently
in random order because it iterates in the hash table.
Add a linked list of exported symbols in struct module, so we can
iterate on symbols per module.
This commit makes Module.symvers much more readable; the outer loop in
write_dump() iterates over the modules in the order of modules.order,
and the inner loop dumps symbols in each module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use the doubly linked list to traverse the list in the added order.
This makes the code more consistent.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This looks easier to understand (just because this is a pattern in
the kernel code). No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages unresolved in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
Use a doubly linked list to keep the order in the symbol table in the
ELF file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Add a small helper, sym_add_unresolved() to ease the further
refactoring.
Remove the 'weak' argument from alloc_symbol() because it is sensible
only for unresolved symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages modules in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
It works, but the error messages are shown in the reverse order.
If you have a Makefile like this:
obj-m += foo.o bar.o
then, modpost shows error messages in bar.o, foo.o, in this order.
Use a doubly linked list to keep the order in modules.order; use
list_add_tail() for the node addition and list_for_each_entry() for
the list traverse.
Now that the kernel's list macros have been imported to modpost, I will
use them actively going forward.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Import include/linux/list.h to use convenient list macros in modpost.
I dropped kernel-space code such as {WRITE,READ}_ONCE etc. and unneeded
macros.
I also imported container_of() from include/linux/container_of.h and
type definitions from include/linux/types.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, mod->gpl_compatible is tristate; it is set to -1 by default,
then to 1 or 0 when MODULE_LICENSE() is found.
Maybe, -1 was chosen to represent the 'unknown' license, but it is not
useful.
The current code:
if (!mod->gpl_compatible)
check_for_gpl_usage(exp->export, basename, exp->name);
... only cares whether gpl_compatible is zero or not.
Change it to a bool type with the initial value 'true', which has no
functional change.
The default value should be 'true' instead of 'false'.
Since commit 1d6cd39293 ("modpost: turn missing MODULE_LICENSE() into
error"), unknown module license is an error.
The error message, "missing MODULE_LICENSE()" is enough to explain the
issue. It is not sensible to show another message, "GPL-incompatible
module ... uses GPL-only symbol".
Add comments to explain this.
While I was here, I renamed gpl_compatible to is_gpl_compatible for
clarification, and also slightly refactored the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use 'bool' to clarify that the valid value is true or false.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The install target should not depend on any build artifact.
The reason is explained in commit 19514fc665 ("arm, kbuild: make
"make install" not depend on vmlinux").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I think this hack is a bad idea. arch/powerpc/boot/Makefile is the
only and last user. Let's stop doing this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Fix typos in comments so that they make sense.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no good reason to define struct namespace_list in modpost.h
struct module has pointers to struct namespace_list, but that does
not require the definition of struct namespace_list.
Move it to modpost.c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Do not repeat the similar code.
It is simpler to do this in check_exports() instead of add_versions().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
