Here is one fix, and 3 documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for quite
some time.
The documentation updates are for the embargoed-hardware-issues.rst file
to add a new entry, change an existing one, and sort the list to make
changes easier in the future.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEMSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynl8wCgw54h8hggK6eikgctGuyoLJZjDR4AnRVNvtQi
ItQ1+zHzBjkdz1s/DlM7
=/7MV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one fix, and three documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for
quite some time.
The documentation updates are for the embargoed-hardware-issues.rst
file to add a new entry, change an existing one, and sort the list to
make changes easier in the future.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation/process: Update ARM contact for embargoed hardware issues
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
Here are 2 small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoELfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn1EACeMMP4A10lS7sKlgyM6ftMKA1hu7UAniih+zD/
yGi9Fx4SxUUhYKelF75P
=n7+j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems"
* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom: Fix IRQ check in qcom_slim_probe
interconnect: Restore sync state by ignoring ipa-virt in provider count
Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that
resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEM8g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkRgCePwdlqU8cJAePVKVEQVbBmqV2DQgAoL4aGeH7
/4ZvKAc/3AmUOBU+46sa
=my19
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
that resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoENmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxrwCeIzUtnkEw80tyjr3r/ciuZgfqM90AoJ50aiIV
YqYG8aVcUUrM47qQuYUX
=I21N
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems"
* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: remove bandwidth budget table
usb: xhci-mtk: fix fs isoc's transfer error
usb: gadget: fix race when gadget driver register via ioctl
usb: typec: tcpci_mt6360: Update for BMC PHY setting
usb: gadget: uvc: allow for application to cleanly shutdown
usb: typec: tcpci: Don't skip cleanup in .remove() on error
usb: cdc-wdm: fix reading stuck on device close
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, Matt Evans.
-----BEGIN PGP SIGNATURE-----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=HVUs
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, and Matt Evans.
* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
pasta from the corresponding s390 code screwed up the address calculation
for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to
calculate the proper start address. It's a mystery why this code is not
generic and shared because there is nothing architecture specific in there,
but that's too intrusive for a backportable fix.
-----BEGIN PGP SIGNATURE-----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=f+jf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
in the middle of the arguments. This reordering broke BPF programs which
relied on the old argument list. While tracepoints are not considered
stable ABI, it's not trivial to make BPF cope with such a change, but it's
being worked on. For now restore the original argument order and move the
new argument to the end of the argument list.
-----BEGIN PGP SIGNATURE-----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=6Bvx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
interrupt code. The consolidation of the interrupt handler invocation code
added an unconditional warning when generic_handle_domain_irq() is invoked
from outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required for
certain interrupt types. The subsequently called code already contains a
warning which triggers conditionally for interrupt chips which indicate
this requirement in their properties. Remove the overbroad one.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKAwyATHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYod4+D/9KrvIKGNSRKThw1zx4w1FzeOtRjhiT
HdwiNENKUhClWQHTzfv1xHOEv1hFVTuuz5tP2zIfzkKrDe1/dijZY9P/QvdEhp+s
idRzxaclWlxsxv4K8zqD1i/0klQ91YBA5aADgn4t1vY4WdWtJpbkFW8tndoAUAZR
THrFBGrvBdhjsSwK5VVfZcwNNeIh0lGG83vE8zPnzI7fbNxuAa1pI9bAigSa9jIT
zYcMm+mmC7eIdjeLD/Vx5Rujn3/MOLfmAfv9TwNIH2heQo6RwtINt0mzuDqKibOh
ly6T1Ol12WQuOLy5dYHglvogAzhJP49RbsQHCxU9S7BaWqcVfHuN88WhU/JXgfHn
UGdE3ppJpNHk/IqGSUyilDUzXgR9YH3j+XOYNnG2PidDWl5aPwuU1h9L7wdJnDZy
5Ou6JVmQjYc2+A6YeCZsNl+FdyvWpH+Gc/oGi09Saf1kCFuAVW11mkhRFHawWfHW
SZRpbSWxE+v0QFDd6T+IajSEwifw4+Ua8yjxRUU1dpsTcxHdFxGBlFFIebeYXlzJ
Xx2fASyCdlMzlEj7qegU2Y67yn0+yQjziZLaOCMtDtbWFO9APV447lEb5FcImqgi
XTT2HHw5sPZpLLoCED2zRoAsrh+aK9rJyH9pWEoRYvxVgmO613Qkw8GVJSmm8mO+
tZraqHFkoTuxRg==
=pJj8
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace 1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash.
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Will reported the following splat when running with Protected KVM
enabled:
[ 2.427181] ------------[ cut here ]------------
[ 2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac
[ 2.428424] Modules linked in:
[ 2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1
[ 2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
[ 2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac
[ 2.431091] lr : create_hyp_exec_mappings+0x40/0x80
[ 2.431377] sp : ffff80000803baf0
[ 2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000
[ 2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40
[ 2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000
[ 2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8
[ 2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000
[ 2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004
[ 2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b
[ 2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005
[ 2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11
[ 2.436149] Call trace:
[ 2.436600] __create_hyp_private_mapping+0x118/0x1ac
[ 2.437576] create_hyp_exec_mappings+0x40/0x80
[ 2.438180] kvm_init_vector_slots+0x180/0x194
[ 2.458941] kvm_arch_init+0x80/0x274
[ 2.459220] kvm_init+0x48/0x354
[ 2.459416] arm_init+0x20/0x2c
[ 2.459601] do_one_initcall+0xbc/0x238
[ 2.459809] do_initcall_level+0x94/0xb4
[ 2.460043] do_initcalls+0x54/0x94
[ 2.460228] do_basic_setup+0x1c/0x28
[ 2.460407] kernel_init_freeable+0x110/0x178
[ 2.460610] kernel_init+0x20/0x1a0
[ 2.460817] ret_from_fork+0x10/0x20
[ 2.461274] ---[ end trace 0000000000000000 ]---
Indeed, the Protected KVM mode promotes __create_hyp_private_mapping()
to a hypercall as EL1 no longer has access to the hypervisor's stage-1
page-table. However, the call from kvm_init_vector_slots() happens after
pKVM has been initialized on the primary CPU, but before it has been
initialized on secondaries. As such, if the KVM initcall procedure is
migrated from one CPU to another in this window, the hypercall may end up
running on a CPU for which EL2 has not been initialized.
Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the
vectors in the private range, so the hypercall in question is in fact
superfluous. Skip it when pKVM is enabled.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
[maz: simplified the checks slightly]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513092607.35233-1-qperret@google.com
When adding support for the slightly wonky Apple M1, we had to
populate ID_AA64PFR0_EL1.GIC==1 to present something to the guest,
as the HW itself doesn't advertise the feature.
However, we gated this on the in-kernel irqchip being created.
This causes some trouble for QEMU, which snapshots the state of
the registers before creating a virtual GIC, and then tries to
restore these registers once the GIC has been created. Obviously,
between the two stages, ID_AA64PFR0_EL1.GIC has changed value,
and the write fails.
The fix is to actually emulate the HW, and always populate the
field if the HW is capable of it.
Fixes: 562e530fd7 ("KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Oliver Upton <oupton@google.com>
Link: https://lore.kernel.org/r/20220503211424.3375263-1-maz@kernel.org
These constants will change over time, and userspace has no
business knowing about them. Hide them behind __KERNEL__.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that the pmu code does not access hyp data, reenable it in
protected mode.
Once fully supported, protected VMs will not have pmu support,
since that could leak information. However, non-protected VMs in
protected mode should have pmu support if available.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-5-tabba@google.com
Instead of the host accessing hyp data directly, pass the pmu
events of the current cpu to hyp via the vcpu.
This adds 64 bits (in two fields) to the vcpu that need to be
synced before every vcpu run in nvhe and protected modes.
However, it isolates the hypervisor from the host, which allows
us to use pmu in protected mode in a subsequent patch.
No visible side effects in behavior intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-4-tabba@google.com
struct kvm_pmu has 2 holes using 10 bytes. This is instantiated
in all vcpus, so it adds up. Repack the structures to remove the
holes.
No functional change intended.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-3-tabba@google.com
Eases migrating away from using hyp data and simplifies the code.
No functional change intended.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220510095710.148178-2-tabba@google.com
Unsusprisingly, Apple M1 Pro/Max have the exact same defect as the
original M1 and generate random SErrors in the host when a guest
tickles the GICv3 CPU interface the wrong way.
Add the part numbers for both the CPU types found in these two
new implementations, and add them to the hall of shame. This also
applies to the Ultra version, as it is composed of 2 Max SoCs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220514102524.3188730-1-maz@kernel.org
Per the thread linked below, "premature next" is not considered to be a
realistic threat model, and leads to more serious security problems.
"Premature next" is the scenario in which:
- Attacker compromises the current state of a fully initialized RNG via
some kind of infoleak.
- New bits of entropy are added directly to the key used to generate the
/dev/urandom stream, without any buffering or pooling.
- Attacker then, somehow having read access to /dev/urandom, samples RNG
output and brute forces the individual new bits that were added.
- Result: the RNG never "recovers" from the initial compromise, a
so-called violation of what academics term "post-compromise security".
The usual solutions to this involve some form of delaying when entropy
gets mixed into the crng. With Fortuna, this involves multiple input
buckets. With what the Linux RNG was trying to do prior, this involves
entropy estimation.
However, by delaying when entropy gets mixed in, it also means that RNG
compromises are extremely dangerous during the window of time before
the RNG has gathered enough entropy, during which time nonces may become
predictable (or repeated), ephemeral keys may not be secret, and so
forth. Moreover, it's unclear how realistic "premature next" is from an
attack perspective, if these attacks even make sense in practice.
Put together -- and discussed in more detail in the thread below --
these constitute grounds for just doing away with the current code that
pretends to handle premature next. I say "pretends" because it wasn't
doing an especially great job at it either; should we change our mind
about this direction, we would probably implement Fortuna to "fix" the
"problem", in which case, removing the pretend solution still makes
sense.
This also reduces the crng reseed period from 5 minutes down to 1
minute. The rationale from the thread might lead us toward reducing that
even further in the future (or even eliminating it), but that remains a
topic of a future commit.
At a high level, this patch changes semantics from:
Before: Seed for the first time after 256 "bits" of estimated
entropy have been accumulated since the system booted. Thereafter,
reseed once every five minutes, but only if 256 new "bits" have been
accumulated since the last reseeding.
After: Seed for the first time after 256 "bits" of estimated entropy
have been accumulated since the system booted. Thereafter, reseed
once every minute.
Most of this patch is renaming and removing: POOL_MIN_BITS becomes
POOL_INIT_BITS, credit_entropy_bits() becomes credit_init_bits(),
crng_reseed() loses its "force" parameter since it's now always true,
the drain_entropy() function no longer has any use so it's removed,
entropy estimation is skipped if we've already init'd, the various
notifiers for "low on entropy" are now only active prior to init, and
finally, some documentation comments are cleaned up here and there.
Link: https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Nadia Heninger <nadiah@cs.ucsd.edu>
Cc: Tom Ristenpart <ristenpart@cornell.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In the MTE tests there are several places where we use chains of if
statements to open code what could be written as switch statements, move
over to switch statements to make the idiom clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220510164520.768783-6-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Void pointers may be freely used with other pointer types in C, any casts
between void * and other pointer types serve no purpose other than to
mask potential warnings. Drop such casts from check_tags_inclusion to
help with future review of the code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE check_tags_inclusion test uses the mte_switch_mode() helper but
ignores the return values it generates meaning we might not be testing
the things we're trying to test, fail the test if it reports an error.
The helper will log any errors it returns.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-4-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_switch_mode() currently rejects attempts to set a zero tag however
there are tests such as check_tags_inclusion which attempt to cover cases
with zero tags using mte_switch_mode(). Since it is not clear why we are
rejecting zero tags change the test to accept them.
The issue has not previously been as apparent as it should be since the
return value of mte_switch_mode() was not always checked in the callers
and the tests weren't otherwise failing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we detect a problem in verify_mte_pointer_validity() while checking
tags we don't log what the problem was which makes debugging harder. Add
some diagnostics.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220510164520.768783-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Between the header and the definitions, there's no line gap, and in a
couple of places a double line gap for no semantic reason, which makes
the output look a little odd.
Fix this so blocks are consistently separated with a single line gap:
* Add a newline after the "Generated file" comment line, so this is
clearly split from whatever the first definition in the file is.
* At the start of a SysregFields block there's no need for a newline as
we haven't output any sysreg encoding details prior to this.
* At the end of a Sysreg block there's no need for a newline if we
have no RES0 or RES1 fields, as there will be a line gap after the
previous element (e.g. a Fields line).
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220513174118.266966-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently for registers without fields we create a comment pointing at
the common definitions, e.g.
| #define REG_TTBR0_EL1 S3_0_C2_C0_0
| #define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
| #define SYS_TTBR0_EL1_Op0 3
| #define SYS_TTBR0_EL1_Op1 0
| #define SYS_TTBR0_EL1_CRn 2
| #define SYS_TTBR0_EL1_CRm 0
| #define SYS_TTBR0_EL1_Op2 0
|
| /* See TTBRx_EL1 */
It would be slightly nicer if the comment said what we should be looking
for, e.g.
| #define REG_TTBR0_EL1 S3_0_C2_C0_0
| #define SYS_TTBR0_EL1 sys_reg(3, 0, 2, 0, 0)
| #define SYS_TTBR0_EL1_Op0 3
| #define SYS_TTBR0_EL1_Op1 0
| #define SYS_TTBR0_EL1_CRn 2
| #define SYS_TTBR0_EL1_CRm 0
| #define SYS_TTBR0_EL1_Op2 0
|
| /* For TTBR0_EL1 fields see TTBRx_EL1 */
Update the comment generation accordingly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220513174118.266966-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we have 3 primitives for removing an opened file from descriptor
table - pick_file(), __close_fd_get_file() and close_fd_get_file(). Their
calling conventions are rather odd and there's a code duplication for no
good reason. They can be unified -
1) have __range_close() cap max_fd in the very beginning; that way
we don't need separate way for pick_file() to report being past the end
of descriptor table.
2) make {__,}close_fd_get_file() return file (or NULL) directly, rather
than returning it via struct file ** argument. Don't bother with
(bogus) return value - nobody wants that -ENOENT.
3) make pick_file() return NULL on unopened descriptor - the only caller
that used to care about the distinction between descriptor past the end
of descriptor table and finding NULL in descriptor table doesn't give
a damn after (1).
4) lift ->files_lock out of pick_file()
That actually simplifies the callers, as well as the primitives themselves.
Code duplication is also gone...
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These two interface were added in 091141a42 commit,
but now there is no place to call them.
The only user of fput/fget_many() was removed in commit
62906e89e6 ("io_uring: remove file batch-get optimisation").
A user of get_file_rcu_many() were removed in commit
f073531070 ("init: add an init_dup helper").
And replace atomic_long_sub/add to atomic_long_dec/inc
can improve performance.
Here are the test results of unixbench:
Cmd: ./Run -c 64 context1
Without patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
Pipe-based Context Switching 4000.0 2798407.0 6996.0
========
System Benchmarks Index Score (Partial Only) 6996.0
With patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
Pipe-based Context Switching 4000.0 3486268.8 8715.7
========
System Benchmarks Index Score (Partial Only) 8715.7
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now when Intel Elkhart Lake uses again common bit timing and there are
no other users for custom bit timing, we can bring back the changes
done by the commit 0ddd83fbeb ("can: m_can: remove support for
custom bit timing").
This effectively reverts commit ea768b2ffe ("Revert "can: m_can:
remove support for custom bit timing"") while taking into account
commit ea22ba40de ("can: m_can: make custom bittiming fields const")
and commit 7d4a101c0b ("can: dev: add sanity check in
can_set_static_ctrlmode()").
Link: https://lore.kernel.org/all/20220512124144.536850-2-jarkko.nikula@linux.intel.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This reverts commit 0e8ffdf3b86dfd44b651f91b12fcae76c25c453b.
Commit 0e8ffdf3b86d ("can: m_can: pci: use custom bit timings for
Elkhart Lake") broke the test case using bitrate switching.
| ip link set can0 up type can bitrate 500000 dbitrate 4000000 fd on
| ip link set can1 up type can bitrate 500000 dbitrate 4000000 fd on
| candump can0 &
| cangen can1 -I 0x800 -L 64 -e -fb \
| -D 11223344deadbeef55667788feedf00daabbccdd44332211 -n 1 -v -v
Above commit does everything correctly according to the datasheet.
However datasheet wasn't correct.
I got confirmation from hardware engineers that the actual CAN
hardware on Intel Elkhart Lake is based on M_CAN version v3.2.0.
Datasheet was mirroring values from an another specification which was
based on earlier M_CAN version leading to wrong bit timings.
Therefore revert the commit and switch back to common bit timings.
Fixes: ea4c178768 ("can: m_can: pci: use custom bit timings for Elkhart Lake")
Link: https://lore.kernel.org/all/20220512124144.536850-1-jarkko.nikula@linux.intel.com
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reported-by: Chee Hou Ong <chee.houx.ong@intel.com>
Reported-by: Aman Kumar <aman.kumar@intel.com>
Reported-by: Pallavi Kumari <kumari.pallavi@intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
- Fix two NDEBUG warnings in 'perf bench numa'.
- Fix ARM coresight `perf test` failure.
- Sync linux/kvm.h with the kernel sources.
- Add James and Mike as Arm64 performance events reviewers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYn/zSgAKCRCyPKLppCJ+
J05jAP4gwHLXP1jcyixLRPrJc1tZjJlRSqdOkQn7n1wE4okh4QEA/2k4k+s4Onn6
YMCAJFFgzqi/U77uN5IBX3dLWZ02SAg=
=albT
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix two NDEBUG warnings in 'perf bench numa'
- Fix ARM coresight `perf test` failure
- Sync linux/kvm.h with the kernel sources
- Add James and Mike as Arm64 performance events reviewers
* tag 'perf-tools-fixes-for-v5.18-2022-05-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
The IRQ simulator uses irq_work to trigger an interrupt. Without the
IRQ_WORK_HARD_IRQ flag the irq_work will be performed in thread context
on PREEMPT_RT. This causes locking errors later in handle_simple_irq()
which expects to be invoked with disabled interrupts.
Triggering individual interrupts in hardirq context should not lead to
unexpected high latencies since this is also what the hardware
controller does. Also it is used as a simulator so...
Use IRQ_WORK_INIT_HARD() to carry out the irq_work in hardirq context on
PREEMPT_RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/YnuZBoEVMGwKkLm+@linutronix.de
With debugobjects enabled the timer hint for freeing of active timers
embedded inside delayed works is always the same, i.e. the hint is
delayed_work_timer_fn, even though the function the delayed work is going
to run can be wildly different depending on what work was queued. Enabling
workqueue debugobjects doesn't help either because the delayed work isn't
considered active until it is actually queued to run on a workqueue. If the
work is freed while the timer is pending the work isn't considered active
so there is no information from workqueue debugobjects.
Special case delayed works in the timer debugobjects hint logic so that the
delayed work function is returned instead of the delayed_work_timer_fn.
This will help to understand which delayed work was pending that got
freed.
Apply the same treatment for kthread_delayed_work because it follows the
same pattern.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220511201951.42408-1-swboyd@chromium.org
Refactor io_accept() to support multishot mode.
theoretical analysis:
1) when connections come in fast
- singleshot:
add accept sqe(userspace) --> accept inline
^ |
|-----------------|
- multishot:
add accept sqe(userspace) --> accept inline
^ |
|--*--|
we do accept repeatedly in * place until get EAGAIN
2) when connections come in at a low pressure
similar thing like 1), we reduce a lot of userspace-kernel context
switch and useless vfs_poll()
tests:
Did some tests, which goes in this way:
server client(multiple)
accept connect
read write
write read
close close
Basically, raise up a number of clients(on same machine with server) to
connect to the server, and then write some data to it, the server will
write those data back to the client after it receives them, and then
close the connection after write return. Then the client will read the
data and then close the connection. Here I test 10000 clients connect
one server, data size 128 bytes. And each client has a go routine for
it, so they come to the server in short time.
test 20 times before/after this patchset, time spent:(unit cycle, which
is the return value of clock())
before:
1930136+1940725+1907981+1947601+1923812+1928226+1911087+1905897+1941075
+1934374+1906614+1912504+1949110+1908790+1909951+1941672+1969525+1934984
+1934226+1914385)/20.0 = 1927633.75
after:
1858905+1917104+1895455+1963963+1892706+1889208+1874175+1904753+1874112
+1874985+1882706+1884642+1864694+1906508+1916150+1924250+1869060+1889506
+1871324+1940803)/20.0 = 1894750.45
(1927633.75 - 1894750.45) / 1927633.75 = 1.65%
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/20220514142046.58072-5-haoxu.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For operations like accept, multishot is a useful feature, since we can
reduce a number of accept sqe. Let's integrate it to fast poll, it may
be good for other operations in the future.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/20220514142046.58072-4-haoxu.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a flag to indicate multishot mode for fast poll. currently only
accept use it, but there may be more operations leveraging it in the
future. Also add a mask IO_APOLL_MULTI_POLLED which stands for
REQ_F_APOLL_MULTI | REQ_F_POLLED, to make the code short and cleaner.
Signed-off-by: Hao Xu <howeyxu@tencent.com>
Link: https://lore.kernel.org/r/20220514142046.58072-3-haoxu.linux@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a group of messages are sent from user space as a set, if
the last message has less than Tx FIFO DEPTH number of bytes
to transfer, Tx half empty interrupt is triggered continuously
from the hardware. It is due to Bus not busy interrupt coming
along with Tx half empty and tx empty.
Hence, service the Tx interrupts before Bus not busy interrupt
to update the i2c message status correctly.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Most of these stuff are reported by checkpatch.
But fixes are:
- Incorrect indetation
- Missing blank line after variable declaration
- Additional ()
- Missing spaces around +
- Missing parenthesis when if has them
- Newlines
- Remove MODULE_ALIAS - none is really using it
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Check the return value of xiic_reinit.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Timeout as 1 second sets an upper limit on the length
of the transfer executed, but there is no maximum length
of a write or read message set in i2c_adapter_quirks for
this controller.
This upper limit affects devices that require sending
large firmware blobs over I2C.
To remove that limitation, calculate the minimal time
necessary, plus some wiggle room, for every message and
use it instead of the default one second, if more than
one second.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Return irq instead of ret which always equals to zero here.
Fixes: d5c70627a7 ("iio: adc: Add Xilinx AMS driver")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It's more logical to read these get timing parameters ACPI method calls
sorted by speed categories in increasing order: Standard-mode,
Fast-mode, Fast-mode Plus and High-speed mode.
Originally these were in order after commit a92ec1746f
("i2c: designware: get fast plus and high speed *CNT configuration") but
got mixed up over the years.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Clang warns:
drivers/i2c/busses/i2c-at91-master.c:707:6: warning: variable 'dma_buf' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (dev->use_dma) {
^~~~~~~~~~~~
drivers/i2c/busses/i2c-at91-master.c:717:27: note: uninitialized use occurs here
i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret);
^~~~~~~
Initialize dma_buf to NULL, as i2c_put_dma_safe_msg_buf() is a no-op
when the first argument is NULL, which will work for the !dev->use_dma
case.
Fixes: 03fbb903c8 ("i2c: at91: use dma safe buffers")
Link: https://github.com/ClangBuiltLinux/linux/issues/1629
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This driver doesn't need to access I/O ports directly via inb()/outb()
and friends. This patch abstracts such access by calling ioport_map()
to enable the use of more typical ioread8()/iowrite8() I/O memory
accessor calls.
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The rk3568 cru requires a clock input and a phandle to the grf node. Add
these bindings to clear some dtbs_check warnings.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220511150117.113070-2-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
