Previously, during suspend, intel_pch_thermal driver logs for every
cooling iteration, about the current PCH temperature and number of cooling
iterations that have been tried, like below
[ 100.955526] intel_pch_thermal 0000:00:14.2: CPU-PCH current temp [53C] higher than the threshold temp [50C], sleep 1 times for 100 ms duration
[ 101.064156] intel_pch_thermal 0000:00:14.2: CPU-PCH current temp [53C] higher than the threshold temp [50C], sleep 2 times for 100 ms duration
After changing the default delay_cnt to 600, in practice, it is common to
see tens of the above messages if the system is suspended when PCH
overheats. Thus, change this log message from dev_warn to dev_dbg because
it is only useful when we want to check the temperature trend.
At the same time, there is always a one-line message given by the driver
with the patch applied, with below four possibilities.
1. PCH is cool, no cooling delay needed
[ 1791.902853] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [48C]
2. PCH overheats and becomes cool after the cooling delays
[ 1475.511617] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C] after 30700 ms delay
3. PCH still overheats after the overall cooling timeout
[ 2250.157487] intel_pch_thermal 0000:00:12.0: CPU-PCH is hot [60C] after 60000 ms delay. S0ix might fail
4. PCH aborts cooling because of wakeup event detected during the delay
[ 1933.639509] intel_pch_thermal 0000:00:12.0: Wakeup event detected, abort cooling
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit ef63b043ac ("thermal: intel: pch: fix S0ix failure due to PCH
temperature above threshold") introduces delay loop mechanism that allows
PCH temperature to go down below threshold during suspend so it won't
block S0ix. And the default overall delay timeout is 1 second.
However, in practice, we found that the time it takes to cool the PCH down
below threshold highly depends on the initial PCH temperature when the
delay starts, as well as the ambient temperature.
And in some cases, the 1 second delay is not sufficient. As a result, the
system stays in a shallower power state like PCx instead of S0ix, and
drains the battery power, without user' notice.
To make sure S0ix is not blocked by the PCH overheating, we
1. expand the default overall timeout to 60 seconds.
2. make sure the temperature is below threshold rather than equal to it.
At the same time, as the cooling delay can be much longer and many wakeup
events (ACPI Power Button press, USB mouse move, etc) becomes valid in the
suspend_noirq phase, add detection of wakeup event so that the driver
does not delay blindly when the system suspend is likely to abort soon.
This patch may introduce longer suspend time, but only in the cases when
the system overheats and Linux used to enter a shallower S2idle state,
say, PCx instead of S0ix.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Move the PCH Thermal driver suspend callback to suspend_noirq to do
cooling while the system is more quiescent.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel_pch_thermal driver needs a long delay to cool itself (60 seconds
in maximum) during suspend. When a wakeup event occures during the
delay, it is better for the intel_pch_thermal driver to detect this and
quit cooling because the suspend is likely to abort anyway.
Thus expose pm_wakeup_pending to modules so that intel_pch_thermal
driver can be aware of the wakeup events.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel_hid_dsm_fn_mask is a bit mask containing one bit for each function
index. Fix the function index check in intel_hid_evaluate_method
accordingly, which was missed in commit 97ab451620 ("platform/x86:
intel-hid: fix _DSM function index handling").
Fixes: 97ab451620 ("platform/x86: intel-hid: fix _DSM function index handling")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Niewöhner <linux@mniewoehner.de>
Link: https://lore.kernel.org/r/66f813f5bcc724a0f6dd5adefe6a9728dbe509e3.camel@mniewoehner.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In __device_attach function, The lock holding logic is as follows:
...
__device_attach
device_lock(dev) // get lock dev
async_schedule_dev(__device_attach_async_helper, dev); // func
async_schedule_node
async_schedule_node_domain(func)
entry = kzalloc(sizeof(struct async_entry), GFP_ATOMIC);
/* when fail or work limit, sync to execute func, but
__device_attach_async_helper will get lock dev as
well, which will lead to A-A deadlock. */
if (!entry || atomic_read(&entry_count) > MAX_WORK) {
func;
else
queue_work_node(node, system_unbound_wq, &entry->work)
device_unlock(dev)
As shown above, when it is allowed to do async probes, because of
out of memory or work limit, async work is not allowed, to do
sync execute instead. it will lead to A-A deadlock because of
__device_attach_async_helper getting lock dev.
To fix the deadlock, move the async_schedule_dev outside device_lock,
as we can see, in async_schedule_node_domain, the parameter of
queue_work_node is system_unbound_wq, so it can accept concurrent
operations. which will also not change the code logic, and will
not lead to deadlock.
Fixes: 765230b5f0 ("driver-core: add asynchronous probing support for drivers")
Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com>
Link: https://lore.kernel.org/r/20220518074516.1225580-1-zhangwensheng5@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously the protection of kernfs_pr_cont_buf was piggy backed by
rename_lock, which means that pr_cont() needs to be protected under
rename_lock. This can cause potential circular lock dependencies.
If there is an OOM, we have the following call hierarchy:
-> cpuset_print_current_mems_allowed()
-> pr_cont_cgroup_name()
-> pr_cont_kernfs_name()
pr_cont_kernfs_name() will grab rename_lock and call printk. So we have
the following lock dependencies:
kernfs_rename_lock -> console_sem
Sometimes, printk does a wakeup before releasing console_sem, which has
the dependence chain:
console_sem -> p->pi_lock -> rq->lock
Now, imagine one wants to read cgroup_name under rq->lock, for example,
printing cgroup_name in a tracepoint in the scheduler code. They will
be holding rq->lock and take rename_lock:
rq->lock -> kernfs_rename_lock
Now they will deadlock.
A prevention to this circular lock dependency is to separate the
protection of pr_cont_buf from rename_lock. In principle, rename_lock
is to protect the integrity of cgroup name when copying to buf. Once
pr_cont_buf has got its content, rename_lock can be dropped. So it's
safe to drop rename_lock after kernfs_name_locked (and
kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock
to protect pr_cont_buf.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The intent is to use a genpd governor when there are some states that needs
to be managed. Although, the current code ends up to never assign a
governor, let's fix this.
Fixes: 6abf32f1d9 ("cpuidle: Add RISC-V SBI CPU idle driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While factoring out the PM domain related code from PSCI domain driver into
a set of library functions, a regression when initializing the genpds got
introduced. More precisely, we fail to assign a genpd governor, so let's
fix this.
Fixes: 9d976d6721 ("cpuidle: Factor-out power domain related code from PSCI domain driver")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This code has a check to prevent read overflow but it needs another
check to prevent writing beyond the end of the ->Ssid[] array.
Fixes: 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Denis Efremov <denis.e.efremov@oracle.com>
Link: https://lore.kernel.org/r/20220518070052.108287-1-denis.e.efremov@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
default_topology[] uses cpu_clustergroup_mask() for the CLS level
(guarded by CONFIG_SCHED_CLUSTER) which is currently provided by x86
(arch/x86/kernel/smpboot.c) and arm64 (drivers/base/arch_topology.c).
Fixes: 778c558f49 ("sched: Add cluster scheduler level in core and related Kconfig for ARM64")
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20220513093433.425163-1-dietmar.eggemann@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deferred probe timer that's used for this currently starts at
late_initcall and runs for driver_deferred_probe_timeout seconds. The
assumption being that all available drivers would be loaded and
registered before the timer expires. This means, the
driver_deferred_probe_timeout has to be pretty large for it to cover the
worst case. But if we set the default value for it to cover the worst
case, it would significantly slow down the average case. For this
reason, the default value is set to 0.
Also, with CONFIG_MODULES=y and the current default values of
driver_deferred_probe_timeout=0 and fw_devlink=on, devices with missing
drivers will cause their consumer devices to always defer their probes.
This is because device links created by fw_devlink defer the probe even
before the consumer driver's probe() is called.
Instead of a fixed timeout, if we extend an unexpired deferred probe
timer on every successful driver registration, with the expectation more
modules would be loaded in the near future, then the default value of
driver_deferred_probe_timeout only needs to be as long as the worst case
time difference between two consecutive module loads.
So let's implement that and set the default value to 10 seconds when
CONFIG_MODULES=y.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220429220933.1350374-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each devfreq governor specifies the supported governor event
such as GOV_START and GOV_STOP. When not-supported event is required,
just return non-error. But, commit ce9a0d88d97a ("PM / devfreq: Add
cpu based scaling support to passive governor") returned the error
value. So that return non-error value when not-supported event is required.
Fixes: ce9a0d88d97a ("PM / devfreq: Add cpu based scaling support to passive governor")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add devm_register_restart_handler() helper that registers sys-off
handler using restart mode and with a default priority. Most drivers
will want to register restart handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add devm_register_power_off_handler() helper that registers sys-off
handler using power-off mode and with a default priority. Most drivers
will want to register power-off handler with a default priority, so this
helper will reduce the boilerplate code and make code easier to read and
follow.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Nexus 7 Android tablet can be turned off using a special bootloader
command which is conveyed to bootloader by putting magic value into the
special scratch register and then rebooting normally. This power-off
method should be invoked if USB cable is connected. Bootloader then will
display battery status and power off the device. This behaviour is
borrowed from downstream kernel and matches user expectations, otherwise
it looks like device got hung during power-off and it may wake up on
USB disconnect.
Switch PMC driver to sys-off handler API, which provides drivers with
chained power-off callbacks functionality that is required for powering-off
devices properly. It also brings resource-managed API for the restart
handler registration that makes PMC driver code cleaner.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All pm_power_off_prepare() users were converted to sys-off handler API.
Remove the obsolete global callback variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use devm_register_sys_off_handler() that replaces global
pm_power_off_prepare variable and allows to register multiple
power-off handlers.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Switch to sys-off API that replaces legacy pm_power_off callbacks,
allowing us to remove global pm_* variables and support chaining of
all restart and power-off modes consistently.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace legacy pm_power_off with kernel_can_power_off() helper that
is aware about chained power-off handlers.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use
register_power_off_handler() that registers power-off handlers and
do_kernel_power_off() that invokes chained power-off handlers. Legacy
pm_power_off() will be removed once all drivers will be converted to
the new sys-off API.
Normally arch code should adopt only the do_kernel_power_off() at first,
but m68k is a special case because it uses pm_power_off() "inside out",
i.e. pm_power_off() invokes machine_power_off() [in fact it does nothing],
while it's machine_power_off() that should invoke the pm_power_off(), and
thus, we can't convert platforms to the new API separately. There are only
two platforms changed here, so it's not a big deal.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Palmer Dabbelt <palmer@dabbelt.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add platform-level registration helpers that will ease transition of the
arch/platform power-off callbacks to the new sys-off based API, allowing
us to remove the global pm_power_off variable in the future.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add kernel_can_power_off() helper that replaces open-coded checks of
the global pm_power_off variable. This is a necessary step towards
supporting chained power-off handlers.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add weak stub for the global pm_power_off callback variable. This will
allow us to remove pm_power_off definitions from arch/ code and transition
to the new sys-off based API that will replace the global variable.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add do_kernel_power_off() helper that will remove open-coded pm_power_off
invocations from the architecture code. This is the first step on the way
to remove the global pm_power_off variable, which will allow us to
implement consistent power-off chaining support.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Wrap legacy power-off callbacks into sys-off handlers in order to
support co-existence of both legacy and new callbacks while we're
in process of upgrading legacy callbacks to the new API.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to support power-off chaining we need to get rid of the global
pm_* variables, replacing them with the new kernel API functions that
support chaining.
Introduce new generic sys-off handler API that brings the following
features:
1. Power-off and restart handlers are registered using same API function
that supports chaining, hence all power-off and restart modes will
support chaining using this unified function.
2. Prevents notifier priority collisions by disallowing registration of
multiple handlers at the non-default priority level.
3. Supports passing opaque user argument to callback, which allows us to
remove global variables from drivers.
This patch adds support of the following sys-off modes:
- SYS_OFF_MODE_POWER_OFF_PREPARE that replaces global pm_power_off_prepare
variable and provides chaining support for power-off-prepare handlers.
- SYS_OFF_MODE_POWER_OFF that replaces global pm_power_off variable and
provides chaining support for power-off handlers.
- SYS_OFF_MODE_RESTART that provides a better restart API, removing a need
from drivers to have a global scratch variable by utilizing the opaque
callback argument.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add variant of blocking/atomic_notifier_chain_register() functions that
allow registration of a notifier only if it has unique priority, otherwise
-EBUSY error code is returned by the new functions.
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Russ has done extensive rework on the usermode helper interface for
the firmware loader. He's also exressed recent interest with maintenance
and has kindly agreed to help review generic patches for the firmware
loader. So add him as a new maintainer!
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220512185529.3138310-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When driver_attach(drv); failed, the driver_private will be freed.
But it has been added to the bus, which caused a UAF.
To fix it, we need to delete it from the bus when failed.
Fixes: 190888ac01 ("driver core: fix possible missing of device probe")
Signed-off-by: Schspa Shi <schspa@gmail.com>
Link: https://lore.kernel.org/r/20220513112444.45112-1-schspa@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a list_for_each_entry() loop exits without hitting a break statement
then the iterator points to invalid memory. So in this code the
"tst->name" dereference is an out bounds read. It's an offset from the
&test_upload_list pointer and it will likely work fine most of the time
but it's not correct.
One alternative is to fix this this by changing the test to:
if (list_entry_is_head(tst, &test_upload_list, node)) {
But the simpler, trendy new way is just create a new variable and test
for NULL.
Fixes: a31ad463b7 ("test_firmware: Add test support for firmware upload")
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YnTGU3UJOIA09I7e@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "back" as a possible panel output when _PLD output from ACPI
indicates back panel.
Fixes: 6423d29510 ("driver core: Add sysfs support for physical location of a device")
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220509214930.3573518-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After struct acpi_pld_info *pld is used to fill in physical location
values, it should be freed to prevent memleak.
Suggested-by: Yu Watanabe <watanabe.yu@gmail.com>
Signed-off-by: Won Chung <wonchung@google.com>
Link: https://lore.kernel.org/r/20220509173135.3515126-1-wonchung@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's currently no way to use driver_async_probe kernel cmdline param
to enable default async probe for all drivers. So, add support for "*"
to match with all driver names. When "*" is used, all other drivers
listed in driver_async_probe are drivers that will NOT match the "*".
For example:
* driver_async_probe=drvA,drvB,drvC
drvA, drvB and drvC do asynchronous probing.
* driver_async_probe=*
All drivers do asynchronous probing except those that have set
PROBE_FORCE_SYNCHRONOUS flag.
* driver_async_probe=*,drvA,drvB,drvC
All drivers do asynchronous probing except drvA, drvB, drvC and those
that have set PROBE_FORCE_SYNCHRONOUS flag.
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220504005344.117803-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic property, used in most of the drivers and defined in generic
dma-common DT bindings, is 'dma-channels'. Switch to new property while
keeping backward compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220427161126.647073-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Warn if callers of drm_gem_fb_get_obj() try to use a GEM buffer for
a non-existing or unset plane.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-6-tzimmermann@suse.de
Only handle color planes that exist in a framebuffer's color format.
Ignore non-existing planes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-5-tzimmermann@suse.de
The error-recovery code in drm_gem_vram_plane_helper_prepare_fb() is of
the same pattern as drm_gem_vram_plane_helper_cleanup_fb(). Implement
both of them using an internal helper. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220517113327.26919-4-tzimmermann@suse.de
