Commit 79901317ce ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:
Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.
The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.
Fixes: 79901317ce ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 25331d6ce4 ("net: sched: implement qstat helper routines")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Cong Wang <cwang@twopensource.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently F-RTO may repeatedly send new data packets on non-recurring
timeouts in CA_Loss mode. This is a bug because F-RTO (RFC5682)
should only be used on either new recovery or recurring timeouts.
This exacerbates the recovery progress during frequent timeout &
repair, because we prioritize sending new data packets instead of
repairing the holes when the bandwidth is already scarce.
Fix it by correcting the test of a new recovery episode.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.
Example:
Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
Before patch:
root@debian:~# bridge monitor all
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
After patch:
root@debian:~# bridge monitor all
[MDB]dev br0 port eth1 grp 239.0.0.1 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: cfd5675435 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: David S. Miller <davem@davemloft.net>
A report with INCLUDE/Change_to_include and empty source list should be
treated as a leave, specified by RFC 3376, section 3.1:
"If the requested filter mode is INCLUDE *and* the requested source
list is empty, then the entry corresponding to the requested
interface and multicast address is deleted if present. If no such
entry is present, the request is ignored."
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Mainly fix-ups for the various 4.2 items
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=N/5G
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Mainly fix-ups for the various 4.2 items"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits)
IB/core: Destroy ocrdma_dev_id IDR on module exit
IB/core: Destroy multcast_idr on module exit
IB/mlx4: Optimize do_slave_init
IB/mlx4: Fix memory leak in do_slave_init
IB/mlx4: Optimize freeing of items on error unwind
IB/mlx4: Fix use of flow-counters for process_mad
IB/ipath: Convert use of __constant_<foo> to <foo>
IB/ipoib: Set MTU to max allowed by mode when mode changes
IB/ipoib: Scatter-Gather support in connected mode
IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES
IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush
IB/ucma: Fix lockdep warning in ucma_lock_files
rds: rds_ib_device.refcount overflow
RDMA/nes: Fix for incorrect recording of the MAC address
RDMA/nes: Fix for resolving the neigh
RDMA/core: Fixes for port mapper client registration
IB/IPoIB: Fix bad error flow in ipoib_add_port()
IB/mlx4: Do not attemp to report HCA clock offset on VFs
IB/cm: Do not queue work to a device that's going away
IB/srp: Avoid using uninitialized variable
...
When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.
This is in fact bogus for the MSG_PEEK case as this is done without
any locking. So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.
This patch fixes this by only storing the result if the skb is not
shared. This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6c3e921b18.
commit 6c3e921b18 ("net: fec: Ensure clocks are enabled while using mdio
bus") prevents the kernel to boot on mx6 boards, so let's revert it.
Reported-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This may result in a kernel panic. The bug has always existed but
somehow we've run out of luck now and it bites.
Signed-off-by: Richard Stearn <richard@rns-stearn.demon.co.uk>
Cc: stable@vger.kernel.org # all branches
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shared skbs must not be modified and this is crucial for broadcast
and/or multicast paths where we use it as an optimisation to avoid
unnecessary cloning.
The function skb_recv_datagram breaks this rule by setting peeked
without cloning the skb first. This causes funky races which leads
to double-free.
This patch fixes this by cloning the skb and replacing the skb
in the list when setting skb->peeked.
Fixes: a59322be07 ("[UDP]: Only increment counter on first peek/recv")
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly as in commit 4f7d2cdfdd ("rtnetlink: verify IFLA_VF_INFO
attributes before passing them to driver"), we have a double nesting
of netlink attributes, i.e. IFLA_VF_PORTS only contains IFLA_VF_PORT
that is nested itself. While IFLA_VF_PORTS is a verified attribute
from ifla_policy[], we only check if the IFLA_VF_PORTS container has
IFLA_VF_PORT attributes and then pass the attribute's content itself
via nla_parse_nested(). It would be more correct to reject inner types
other than IFLA_VF_PORT instead of continuing parsing and also similarly
as in commit 4f7d2cdfdd, to check for a minimum of NLA_HDRLEN.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Scott Feldman <sfeldma@gmail.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GPMC smart idle is not really broken but it does not support
smart idle with wakeup.
Fixes: 556708fe87 ("ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken")
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
If a failure occurs during probe, brcmstb_gpio_remove() is called. In
remove, we call platform_get_drvdata(), but at the time of failure in
the probe the driver data hadn't yet been set which leads to a NULL
ptr dereference in the remove's list_for_each. Call
platform_set_drvdata() and set up list head right after allocating the
priv struct to both avoid the null pointer dereference that could
occur today. To guard against potential future changes, check for
null pointer in remove.
Reported-by: Tim Ross <tross@broadcom.com>
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch has the driver automatically reread partitions if a namespace
has a separate metadata format. Previously revalidating a disk was
sufficient to get the correct capacity set on such formatted drives,
but partitions that may exist would not have been surfaced.
Reported-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=aj6S
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux
Pull file locking updates from Jeff Layton:
"I had thought that I was going to get away without a pull request this
cycle. There was a NFSv4 file locking problem that cropped up that I
tried to fix in the NFSv4 code alone, but that fix has turned out to
be problematic. These patches fix this in the correct way.
Note that this touches some NFSv4 code as well. Ordinarily I'd wait
for Trond to ACK this, but he's on holiday right now and the bug is
rather nasty. So I suggest we merge this and if he raises issues with
it we can sort it out when he gets back"
Acked-by: Bruce Fields <bfields@fieldses.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
[ +1 to this series fixing a 100% reproducible slab corruption +
general protection fault in my nfs-root test environment. - Dan ]
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
* tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux:
locks: inline posix_lock_file_wait and flock_lock_file_wait
nfs4: have do_vfs_lock take an inode pointer
locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait
locks: have flock_lock_file take an inode pointer instead of a filp
Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CWXf
-----END PGP SIGNATURE-----
Merge tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Makefile changes (top-level+ARC) reinstates -O3 builds (regression
since 3.16)
- IDU intc related fixes, IRQ affinity
- patch to make bitops safer for ARC
- perf fix from Alexey to remove signed PC braino
- Futex backend gets llock/scond support
* tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARCv2: support HS38 releases
ARC: make sure instruction_pointer() returns unsigned value
ARC: slightly refactor macros for boot logging
ARC: Add llock/scond to futex backend
arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
ARC: Make ARC bitops "safer" (add anti-optimization)
ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler
ARCv2: intc: IDU: support irq affinity
ARC: fix unused var wanring
ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO
ARC: Override toplevel default -O2 with -O3
kbuild: Allow arch Makefiles to override {cpp,ld,c}flags
ARCv2: guard SLC DMA ops with spinlock
ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
Pull s390 fixes from Martin Schwidefsky:
"One improvement for the zcrypt driver, the quality attribute for the
hwrng device has been missing. Without it the kernel entropy seeding
will not happen automatically.
And six bug fixes, the most important one is the fix for the vector
register corruption due to machine checks"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/nmi: fix vector register corruption
s390/process: fix sfpc inline assembly
s390/dasd: fix kernel panic when alias is set offline
s390/sclp: clear upper register halves in _sclp_print_early
s390/oprofile: fix compile error
s390/sclp: fix compile error
s390/zcrypt: enable s390 hwrng to seed kernel entropy
The end of jfs_rename(), which is also used by the error paths,
included a call to IWRITE_UNLOCK(new_ip) after labels out1, out2
and out3. If we come in through these labels, IWRITE_LOCK() has not
been called yet.
In moving that call to the correct spot, I also moved some
exceptional truncate code earlier as well, since the early error
paths don't need to deal with it, and I renamed out4: to out_tx: so
a future patch by Jan Kara doesn't need to deal with renumbering or
confusing out-of-order labels.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TcF6
-----END PGP SIGNATURE-----
Merge tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull final init.h/module.h code relocation from Paul Gortmaker:
"With the release of 4.2-rc2 done, we should not be seeing any new code
added that gets upset by this small code move, and we've banked yet
another complete week of testing with this move in place on top of
4.2-rc1 via linux-next to ensure that remained true.
Given that, I'd like to put it in now so that people formulating new
work for 4.3-rc1 will be exposed to the ever so slightly stricter (but
sensible) requirements wrt. whether they are needing init.h vs.
module.h macros, even if they are not using linux-next.
The diffstat of the move is slightly asymmetrical due to needing to
leave behind a couple #ifdef in the old location and add the same ones
to the new location, but other than that, it is a 1:1 move, complete
with the module_init/exit trailing semicolon that we can't fix. That
is, until/unless someone does a tree-wide sed fix of all the
approximately 800 currently in tree users relying on it"
* tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
module: relocate module_init from init.h to module.h
tracer (traces unlikely and likely branches) when enabled with certain
debug options.
What happened was that various debug options like lockdep and DEBUG_PREEMPT
can cause parts of the branch tracer to recurse outside its recursion
protection. In fact, part of its recursion protection used these features
that caused the lockup. This cleans up the code a little and makes the
recursion protection a bit more robust.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVovjwAAoJEEjnJuOKh9ldYacH/3VVIcBhRbuUmANZJSYLXSUh
nEx6FOAfmla/7hH2dVSm8JmnbUzWyunttjbZ6/O8PFE1gumuvVrfWrIV8iwUe4J6
6Z2KdbKd+3FpaSKEnX61UQ1cfR+1eFLOLH9CH5O4twVPyLzvI+NpaJQJaNoX0ywq
vqsUMx63gKdGwhC6BhLi0t/xsTuuIgGjDAjuaF2yNZCuBw9UtziedxK5pveH2OFX
G8dAVfP18aqsXaRMj1LUrm6wRUP0BD7B2v99jdUu2UHYTtmBzy8Vm6RfhJ4Gk8d7
WnIkaBBU5iu75E9ec35MtA52zQ+8b8O/fpIQZgJgFRr7uaf+hvbXjF0UScWE6vU=
=ujzT
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fengguang Wu discovered a crash that happened to be because of the
branch tracer (traces unlikely and likely branches) when enabled with
certain debug options.
What happened was that various debug options like lockdep and
DEBUG_PREEMPT can cause parts of the branch tracer to recurse outside
its recursion protection. In fact, part of its recursion protection
used these features that caused the lockup. This cleans up the code a
little and makes the recursion protection a bit more robust"
* tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have branch tracer use recursive field of task struct
The usage_count variable was read before it was set to the correct
value, due to which the firmware load was failing. Because of this
IPC messages sent to the firmware were timing out causing a delay
of about 1 second while playing audio from the internal speakers.
With this patch the usage_count is read after the function call
pm_runtime_get_sync which will increment the usage_count variable
and the firmware load is successful and all the IPC messages are
processed correctly.
Signed-off-by: Shilpa Sreeramalu <shilpa.sreeramalu@intel.com>
Signed-off-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
I have a ST4000DM000 disk. If Linux is booted while the disk is spun down,
the command that sets transfer mode causes the disk to spin up. The
spin-up takes longer than the default 5s timeout, so the command fails and
timeout is reported.
Fix this by increasing the timeout to 15s, which is enough for the disk to
spin up.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db66e),
data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family)
SATA controller. This patch will allow the driver to limit max_sectors as before
# cat /sys/block/sdb/queue/max_sectors_kb
512
I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2
before seeing corruption, but seems safer to use previous limit. Without this
patch max_sectors_kb will be 32767.
tj: Minor comment update.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.19 and later
Fixes: 34b48db66e ("block: remove artifical max_hw_sectors cap")
We're not supposed to store the adjusted mode into crtc->mode. We don't
use it anyway, so we can safely remove this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the start address calculation when overlay is partially off screen.
fb->bits_per_pixel is not set for YUV formats, and is always zero, which
led to the first component always starting at zero.
Use drm_format_plane_cpp() instead.
This also revealed a problem in that YUYV formats toggle the U/V data
for odd pixel start address offsets. We try to rectify that by
toggling the U/V swap, which for the most part works, but seemingly
introduces a flicker for one scan frame of swapped U/V.
However, these changes result in an overall improvement.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Use drm_plane_helper_check_update() rather than our own code to validate
and limit the size of the displayed image. As we are able to support
scaling, permit the full scaling ability.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix the gem object freeing after a partial import of a dma buffer,
eg, one which has been imported, but not mapped. This was provoking
a warning from the dma_buf code.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Armada overlay plane wasn't being properly cleaned up as it was
missing a call to drm_plane_cleanup(). It also wasn't freeing the
right type of pointer (although we were still freeing the right
pointer value.)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Nothing was waking up the overlay plane wait queue, so we were fully
reliant on the HZ/25 wait timing out to make progress. Fix the lack
of wake-up.
We were also mis-handling the wait_event_timeout() return value - this
returns an unsigned integer of the remaining time, or zero on timeout
and the condition evaluated false. Checking this for less than zero
is not sane.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This device loses blocks, often the partition table area, on trim.
Disable TRIM.
http://pcengines.ch/msata16a.htm
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Some devices lose data on TRIM whether queued or not. This patch adds
a horkage to disable TRIM.
tj: Collapsed unnecessary if() nesting.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Fastboot should only downgrade a modeset if we have a match, not be
used to upgrade to a full modeset. Otherwise we can only use it in a
very restricted way: Initial modeset when the request mode is the
preferred one of the panel and there's still a pfit active. And that
only works because our mode_from_pipe_config fills in the wrong mode
(it takes the adjusted mode, not the requested one).
But we want fast modesets everywhere even after boot-up (especially
for testing, but not only there). Hence we need to be able to make any
modeset a fast one, which means we need to invert the logic and
optionally downgrade a modeset.
Note that this needs ->connector_changed split out from ->mode_changed
otherwise it's not going to work (because we might loose a modeset
because connectors changed but otherwise the config matches). As soon
as that's merged we can drop the i915.fastboot check from this code.
Also make sure that we don't accidentally clear any_ms and that we add
the planes for any kind of modeset.
Finally rename fastboot to fastset (yeah it's a silly name) since this
really isn't about booting all that much.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently we both set mode->private_flags to some value and also use
the pipe_config quirk. But since the pipe_config quirk isn't tied to
the lifetime of the mode object we need to check both.
Simplify this by only using mode.private_flags and stop using the
INHERITED_MODE quirk. Also for clarity add an explicit #define for
that driver priavete mode flag.
By using crtc_state->mode_changed we can also remove the recalc local
variable.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that we recompute the pipe config for all CRTCs that have changed
we don't have problems with stale configuration data for the global
pfit and can remove this hack. Yay!
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit 5ef7bbb09f ("perf tools: Allow to specify custom linker
command") was meant to enable usage non $(CROSS_COMPILE)ld linker during
perf building.
But implementation didn't take into account the fact that LD is a
pre-defined variable in GNU Make. I.e. it is always defined.
Which means there's no point to check "LD ?= ..." because it will never
succeed.
And so LD will be either that explicitly passed to make like this:
------->8-------
make LD=path_to_my_ld ...
------->8-------
or default value, which is host's "ld".
Latter leads to failure of cross-linkage because instead of cross linker
"$(CROSS_COMPILE)ld" host's "ld" is used.
Fortunately there's a way to do correct substitution of $(CROSS_COMPILE)ld
with user defined LD on command-line.
As a reference was used implementation in "tools/lib/traceevent/Makefile".
Build tested for x86_64 and ARC.
Thanks Jiri for this hint.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Fixes: 5ef7bbb09f ("perf tools: Allow to specify custom linker command")
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1436864720-26316-1-git-send-email-abrodkin@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the checking for HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT for AUX area mmaps
until after checking if such mmaps are used anyway.
Reported-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/55A5023C.7020907@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Backmerge fixes since it's getting out of hand again with the massive
split due to atomic between -next and 4.2-rc. All the bugfixes in
4.2-rc are addressed already (by converting more towards atomic
instead of minimal duct-tape) so just always pick the version in next
for the conflicts in modeset code.
All the other conflicts are just adjacent lines changed.
Conflicts:
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem_gtt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_ringbuffer.h
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The USB PLL divider set by the marvell,berlin2-usb-phy compatible is not
correct for BG2. We couldn't change it before because BG2Q incorrectly
used the same compatible string. Now that BG2Q's compatible is fixed,
change BG2's divider to the correct value.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The marvell,berlin2cd-usb-phy compatible incorrectly sets the PLL
divider to BG2's value instead of BG2CD/BG2Q's. Change it to the right
value.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Fix this compile error:
drivers/built-in.o: In function 'mv_usb2_phy_probe':
phy-pxa-28nm-usb2.c:(.text+0x25ec): undefined reference to
'devm_ioremap_resource'
drivers/built-in.o: In function 'mv_hsic_phy_probe':
phy-pxa-28nm-hsic.c:(.text+0x3084): undefined reference to
'devm_ioremap_resource'
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Relying on PM-ops for shutting down PHY clocks was a
bad idea since the users (e.g. PCIe/SATA) might not
have been suspended by then.
The main culprit for not shutting down the clocks was
the stray pm_runtime_get() call in probe.
Fix the whole thing in the right way by getting rid
of that pm_runtime_get() call from probe and
removing all PM-ops. It is the sole responsibility
of the PHY user to properly turn OFF and de-initialize
the PHY as part of its suspend routine.
As PHY core serializes init/exit we don't need
to use a spinlock in this driver. So get rid of it.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This can only fail because of a bug in the code.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Squash in follow-up to also remove start_vbl_count from
intel_crtc->atomic and put it into the intel_crtc directly - it's not
precomputed state.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We needed this originally for updating pagetables in plane commit
functions. But that's extracted into prepare/cleanup now. The other
issue was running updates when the pipe was off. That's also now
fixed.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that there's only a single path for all atomic updates we can call
intel_(pre/post)_plane_update from intel_atomic_commit directly. This
makes the intention more clear.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Huzzah! \o/
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The memory error record structure includes as its first field a
bitmask of which subsequent fields are valid. The allows new fields
to be added to the structure while keeping compatibility with older
software that parses these records. This mechanism was used between
versions 2.2 and 2.3 to add four new fields, growing the size of the
structure from 73 bytes to 80. But Linux just added all the new
fields so this test:
if (gdata->error_data_length >= sizeof(*mem_err))
cper_print_mem(newpfx, mem_err);
else
goto err_section_too_small;
now make Linux complain about old format records being too short.
Add a definition for the old format of the structure and use that
for the minimum size check. Pass the actual size to cper_print_mem()
so it can sanity check the validation_bits field to ensure that if
a BIOS using the old format sets bits as if it were new, we won't
access fields beyond the end of the structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In Indirect context w/a batch buffer,
+WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
v2: SKL revision id was used for BXT, copy paste error found during
internal review (Bob Beckett).
v3: explain why part of the WA is in Per ctx batch (Mika)
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In Indirect context w/a batch buffer,
+WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt
v2: address static checker warning where unsigned value was checked for
less than zero which is never true (Dan Carpenter).
v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables
some other WA; update default value to retain it and document dependency (Mika).
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
