When we enabled auxiliary input/output support for the E810 device, we
forgot to add logic to restart the output when we change time. This is
important as the periodic output will be incorrect after a time change
otherwise.
This unfortunately includes the adjust time function, even though it
uses an atomic hardware interface. The atomic adjustment can still cause
the pin output to stall permanently, so we need to stop and restart it.
Introduce wrapper functions to temporarily disable and then re-enable
the clock outputs.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha D Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 0092a1e3f7
This should be reverted in the char-misc-next branch to make merging
with Linus's branch possible due to issues with the mhi code that was
found in the networking tree.
Link: https://lore.kernel.org/r/20210827175852.GB15018@thinkpad
Reported-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bhaumik Bhatt <bbhatt@codeaurora.org>
Cc: Hemant Kumar <hemantk@codeaurora.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a regression introduced during this cycle that has been
partially addressed by an earlier commit (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=8DoU
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a regression introduced during this cycle that has been partially
addressed by an earlier commit (Andy Shevchenko)"
* tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
Drop the name field (that only is used in diagnostic messages) from
struct acpi_power_resource and use the name of the power resource
device object instead of it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use acpi_handle_debug() to print diagnostic messages regarding ACPI
power resources so as to make it easier to correlate the kernel
messages with the power resource objects in the ACPI namespace that
they are about.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Prevent the operating performance points (OPP) code from crashing
when some entries in the table of required OPPs are set to error
pointer values (Marijn Suijten).
- Prevent the generic power domains (genpd) framework from
incorrectly overriding the performance state of a device set
by its driver while it is runtime-suspended or when runtime
PM of it is disabled (Dmitry Osipenko).
-----BEGIN PGP SIGNATURE-----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=rUmh
-----END PGP SIGNATURE-----
Merge tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues introduced during this cycle, one of which is a
regression and the other one affects new code.
Specifics:
- Prevent the operating performance points (OPP) code from crashing
when some entries in the table of required OPPs are set to error
pointer values (Marijn Suijten)
- Prevent the generic power domains (genpd) framework from
incorrectly overriding the performance state of a device set by its
driver while it is runtime-suspended or when runtime PM of it is
disabled (Dmitry Osipenko)"
* tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Improve runtime PM performance state handling
opp: core: Check for pending links before reading required_opp pointers
Dan reported __write_overflow warning in ndr_read_string.
CC [M] fs/ksmbd/ndr.o
In file included from ./include/linux/string.h:253,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/wait.h:9,
from ./include/linux/wait_bit.h:8,
from ./include/linux/fs.h:6,
from fs/ksmbd/ndr.c:7:
In function memcpy,
inlined from ndr_read_string at fs/ksmbd/ndr.c:86:2,
inlined from ndr_decode_dos_attr at fs/ksmbd/ndr.c:167:2:
./include/linux/fortify-string.h:219:4: error: call to __write_overflow
declared with attribute error: detected write beyond size of object
__write_overflow();
^~~~~~~~~~~~~~~~~~
This seems to be a false alarm because hex_attr size is always smaller
than n->length. This patch fix this warning by allocation hex_attr with
n->length.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If CONFIG_PM_OPP=n, of_get_required_opp_performance_state() always
returns -EOPNOTSUPP, and all drivers for devices that are part of a PM
Domain fail to probe with:
failed to set required performance state for power-domain foo: -95
probe of bar failed with error -95
Fix this by treating -EOPNOTSUPP the same as -ENODEV.
Fixes: c016baf7dc ("PM: domains: Add support for 'required-opps' to set default perf state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
virtio_mem_set_fake_offline() might sleep now, and we call it under
rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further
up, as we're done with the device.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6cc26d7761: "virtio-mem: use page_offline_(start|end) when setting PageOffline()
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* A pair of device tree updates for the Microsemi Polarfire development
kit that fix some mismatches between the u-boot and Linux enternet
entries.
* A fix to ensure that the F register state is correctly reflected in
core dumps.
-----BEGIN PGP SIGNATURE-----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=Vqsz
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- device tree updates for the Microsemi Polarfire development kit that
fix some mismatches between the u-boot and Linux enternet entries
- ensure that the F register state is correctly reflected in core dumps
* tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: microchip: Add ethernet0 to the aliases node
riscv: dts: microchip: Use 'local-mac-address' for emac1
riscv: Ensure the value of FP registers in the core dump file is up to date
Tdie is an offset calculation that should only be shown when temp_offset
is actually put into a table. This is useless to show for all CPU/APU.
Show it only when necessary.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013). Add a warning and a deprecation schedule.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These follow the rest of the existing codepaths for families
17h and 19h.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
While in practice vcpu->vcpu_idx == vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.
Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
vcpu = kvm_get_vcpu(kvm, vcpu_id);
do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id. The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.
Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx. To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.
Fixes: 1ee0bc559d ("KVM: s390: get rid of local_int array")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Christian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When this feature is enabled the hardware is free to interpret
specification exceptions generated by the guest, instead of causing
program interruption interceptions.
This benefits (test) programs that generate a lot of specification
exceptions (roughly 4x increase in exceptions/sec).
Interceptions will occur as before if ICTL_PINT is set,
i.e. if guest debug is enabled.
There is no indication if this feature is available or not and the
hardware is free to interpret or not. So we can simply set this bit and
if the hardware ignores it we fall back to intercept 8 handling.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/linux-s390/20210706114714.3936825-1-scgl@linux.ibm.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Implement support for Credit-based shaper(CBS) Qdisc hardware
offload mode in the driver. There are two sets of IEEE802.1Qav
(CBS) HW logic in i225 controller and this patch supports
enabling them in the top two priority TX queues.
Driver implemented as recommended by Foxville External
Architecture Specification v0.993. Idleslope and Hi-credit are
the CBS tunable parameters for i225 NIC, programmed in TQAVCC
and TQAVHC registers respectively.
In-order for IEEE802.1Qav (CBS) algorithm to work as intended
and provide BW reservation CBS should be enabled in highest
priority queue first. If we enable CBS on any of low priority
queues, the traffic in high priority queue does not allow low
priority queue to be selected for transmission and bandwidth
reservation is not guaranteed.
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Separates the procedure done during reset from applying a
configuration, knowing when the code is executing allow us to
separate the better what changes the hardware state from what
changes only the driver state.
Introduces a flag for bookkeeping the driver state of TSN
features. When Qav and frame-preemption is also implemented
this flag makes it easier to keep track on whether a TSN feature
driver state is enabled or not though controller state changes,
say, during a reset.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Sets default values for each queue cycle start and cycle end.
This allows some simplification in the handling of these
configurations as most TSN features in i225 require a cycle
to be configured.
In i225, cycle start and end time is required to be programmed
for CBS to work properly.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com>
Signed-off-by: Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver didn't take the lock while flushing the Tx tracker, which
could cause a race where one thread is trying to read timestamps out
while another thread is trying to read the tracker to check the
timestamps.
Avoid this by ensuring that flushing is locked against read accesses.
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We have code in the ice driver which allocates the pin_config structure
if n_pins is > 0, but we never set n_pins to be greater than zero.
There's no reason to keep this code until we actually have pin_config
support. Remove this. We can re-add it properly when we implement
support for pin_config for E810-T devices.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The driver accidentally copied the ice_for_each_rxq iterator when
implementing enablement of the ptp_tx bit for the Tx rings. We still
load the Tx rings and set the ptp_tx field, but we iterate over the
count of the num_rxq.
If the number of Tx and Rx queues differ, this could either cause
a buffer overrun when accessing the tx_rings list if num_txq is greater
than num_rxq, or it could cause us to fail to enable Tx timestamps for
some rings.
This was not noticed originally as we generally have the same number of
Tx and Rx queues.
Fixes: ea9b847cda ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
req->buf_index is u16 and so we rely on registered buffers indexes
fitting into it. Add a build check, so when the upper limit for the
number of buffers is lifted we get a compliation fail but not lurking
problems.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/787e8e1a17cea51ca6301426b1c4c4887b8bd676.1629920396.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_MODULES is n, we got this:
kernel/printk/index.c:146:13: warning: ‘pi_remove_file’ defined but not used [-Wunused-function]
Move it inside #ifdef block to fix this warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210804130105.18732-1-yuehaibing@huawei.com
read_poll_timeout was recently introduced, and can be used to simplify
our console polling loop. This results in a slight reduction in code.
early_uartlite_putc can't get the same treatment, because it can be
called before udelay is set up.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826192549.3203071-1-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the constants defined at the beginning of this file instead of
integer literals when accessing registers. This makes this code easier
to read, and obviates the need for some explanatory comments.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20210826194323.3209227-1-sean.anderson@seco.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 419dd626e3.
It turned out that the change from the reverted commit breaks the ACPI
based rpi's because it causes the 100Mhz max clock to be overridden to the
return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a
OF/DT based clock device.
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Fixes: 419dd626e3 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711")
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add again dev_set_drvdata(), but this time in devm_pvpanic_probe(), in order
for dev_get_drvdata() to not return NULL.
Fixes: 394febc9d0 ("misc/pvpanic: Make 'pvpanic_probe()' resource managed")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Link: https://lore.kernel.org/r/1629385946-4584-2-git-send-email-mihai.carabas@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I got a NULL pointer dereference report when doing fuzz test:
Call Trace:
qp_release_pages+0xae/0x130
qp_host_unregister_user_memory.isra.25+0x2d/0x80
vmci_qp_broker_unmap+0x191/0x320
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
vmci_host_unlocked_ioctl+0x59f/0xd50
? do_vfs_ioctl+0x14b/0xa10
? tomoyo_file_ioctl+0x28/0x30
? vmci_host_do_alloc_queuepair.isra.9+0x1c0/0x1c0
__x64_sys_ioctl+0xea/0x120
do_syscall_64+0x34/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
When a queue pair is created by the following call, it will not
register the user memory if the page_store is NULL, and the
entry->state will be set to VMCIQPB_CREATED_NO_MEM.
vmci_host_unlocked_ioctl
vmci_host_do_alloc_queuepair
vmci_qp_broker_alloc
qp_broker_alloc
qp_broker_create // set entry->state = VMCIQPB_CREATED_NO_MEM;
When unmapping this queue pair, qp_host_unregister_user_memory() will
be called to unregister the non-existent user memory, which will
result in a null pointer reference. It will also change
VMCIQPB_CREATED_NO_MEM to VMCIQPB_CREATED_MEM, which should not be
present in this operation.
Only when the qp broker has mem, it can unregister the user
memory when unmapping the qp broker.
Only when the qp broker has no mem, it can register the user
memory when mapping the qp broker.
Fixes: 06164d2b72 ("VMCI: queue pairs implementation.")
Cc: stable <stable@vger.kernel.org>
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210818124845.488312-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for count appears to be incorrect since a non-zero count
check occurs a couple of statements earlier. Currently the check is
always false and the dev->port->irq != PARPORT_IRQ_NONE part of the
check is never tested and the if statement is dead-code. Fix this
by removing the check on count.
Note that this code is pre-git history, so I can't find a sha for
it.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Logically dead code")
Link: https://lore.kernel.org/r/20210730100710.27405-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide a TODO file that lists the tasks that should be carried out in
order to move this driver off drivers/staging.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210827100813.18610-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The set/clear of the otg control values is done writing to
two different 16bit registers, however we setup the regmap
width for isp1760/61 to 32bit value bits.
So, just access the clear register address (0x376)as the high
part of the otg control register set (0x374), and write the
values in one go to make sure they get clear/set.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-6-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the fields enum values to check interrupts
trigged, use the correct bit values.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-5-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We were already writing directly the port status register to
trigger changes in isp1763. The same is needed in other IP
from the family, including also to setup the read address
before reading from device.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-4-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When trying to send bulks bigger than the biggest block size
we need to split them over several qtd. Fix this limiting the
maximum qtd size to largest block size.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-3-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The loops to setup the memory pool were skipping some
blocks, that was not visible on the ISP1763 because it has
fewer blocks than the ISP1761. But won testing on that IP
from the family that would be an issue.
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-2-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.
Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.
Fixes: 7de8681be2 ("usb: gadget: u_audio: Free requests only after callback")
Cc: stable <stable@vger.kernel.org>
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the uac2 function is stopped, there seems to be an issue reported on
some platforms (Intel Merrifield at least)
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0
...
Call Trace:
dwc3_remove_requests.constprop.0+0x12f/0x170
__dwc3_gadget_ep_disable+0x7a/0x160
dwc3_gadget_ep_disable+0x3d/0xd0
usb_ep_disable+0x1c/0x70
u_audio_stop_capture+0x79/0x120 [u_audio]
afunc_set_alt+0x73/0x80 [usb_f_uac2]
composite_setup+0x224/0x1b90 [libcomposite]
The issue happens only when the gadget is using the sync type "async", not
"adaptive". This indicates that problem is coming from the feedback
endpoint, which is only used with async synchronization mode.
The problem is that request is freed regardless of usb_ep_dequeue(), which
ends up badly if the request is not actually dequeued yet.
Update the feedback endpoint free function to release the endpoint the same
way it is done for the data endpoint, which takes care of the problem.
Fixes: 24f779dac8 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support")
Reported-by: Ferry Toth <ftoth@exalondelft.nl>
Tested-by: Ferry Toth <ftoth@exalondelft.nl>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
