The input parameters may not be reliable, so check the vlan id before
using it, otherwise may set wrong vlan id into hardware.
Fixes: dc8131d846 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls")
Signed-off-by: liaoguojia <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The input parameters may not be reliable. Before using the
queue id, we should check this parameter. Otherwise, memory
overwriting may occur.
Fixes: d341001846 ("net: hns3: refactor the mailbox message between PF and VF")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs.
So the actual vf id is equal to vport_id minus 1.
Some VF print logs are actually vport, and logs of vf id actually use
vport id, so this patch fixes them.
Fixes: ac887be5b0 ("net: hns3: change print level of RAS error log from warning to error")
Fixes: adcf738b80 ("net: hns3: cleanup some print format warning")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vf id from ethtool is added 1 before configured to driver.
So it's necessary to minus 1 when printing it, in order to
keep consistent with user's configuration.
Fixes: dd74f815dd ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When user change rss 'hfunc' without set rss 'hkey' by ethtool
-X command, the driver will ignore the 'hfunc' for the hkey is
NULL. It's unreasonable. So fix it.
Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Fixes: 374ad29176 ("net: hns3: Add RSS general configuration support for VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell reported that since 5.13, KVM's probing of the PMU has
started to fail on his HW. As it turns out, there is an implicit
ordering dependency between the architectural PMU probing code and
and KVM's own probing. If, due to probe ordering reasons, KVM probes
before the PMU driver, it will fail to detect the PMU and prevent it
from being advertised to guests as well as the VMM.
Obviously, this is one probing too many, and we should be able to
deal with any ordering.
Add a callback from the PMU code into KVM to advertise the registration
of a host CPU PMU, allowing for any probing order.
Fixes: 5421db1be3 ("KVM: arm64: Divorce the perf code from oprofile helpers")
Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk
Cc: stable@vger.kernel.org
Add FORCE so that if_changed can detect the command line change.
We'll otherwise see a compilation warning since commit e1f86d7b4b
("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and
filechk").
arch/arm64/kvm/hyp/nvhe/Makefile:58: FORCE prerequisite is missing
Cc: David Brazdil <dbrazdil@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210907052137.1059-1-yuzenghui@huawei.com
virtio_scmi_exit() is only called from __exit function, so the annotation
is correct, but when the driver is built-in, the section gets discarded
and the reference from a callback pointer causes a link-time error:
`virtio_scmi_exit' referenced in section `.rodata' of drivers/firmware/arm_scmi/virtio.o:
defined in discarded section `.exit.text' of drivers/firmware/arm_scmi/virtio.o
I could not figure out a better workaround, so let's just remove that
annotation even if it wastes a couple of bytes in .text.
Link: https://lore.kernel.org/r/20210920100301.1466486-2-arnd@kernel.org
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
ARM_SCMI_TRANSPORT_VIRTIO is a 'bool' Kconfig used to include support for
the SCMI virtio transport inside the core SCMI stack; a bare transport
dependency attached here to this option, though, cannot be properly
propagated to the parent ARM_SCMI_PROTOCOL option and, as a result, it is
currently possible to configure a Kernel where SCMI core is builtin
and includes support for virtio while VirtIO core is =m.
This allowed combination breaks linking:
ARM_SCMI_PROTOCOL=y
ARM_SCMI_TRANSPORT_VIRTIO=y
VIRTIO=m
Bind the dependency in ARM_SCMI_TRANSPORT_VIRTIO to the chosen kind of
compilation of ARM_SCMI_PROTOCOL.
Link: https://lore.kernel.org/r/20210816141609.41751-1-cristian.marussi@arm.com
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Adding back the nonstandard ioctl commands caused -Wrestrict warnings
when building with 'make W=1':
drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_mp_read_rf':
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5515:27: error: 'sprintf' argument 3 overlaps destination object 'extra' [-Werror=restrict]
5515 | sprintf(extra, "%s %d", extra, strtou);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/r8188eu/os_dep/ioctl_linux.c:5470:54: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
5470 | struct iw_point *wrqu, char *extra)
| ~~~~~~^~~~~
Change these to the same construct used elsewhere in that driver,
with an offset to the string to make the warning go away.
The ioctl commands were previously removed, and it's unlikely that
anything is actually using them, so ideally I would prefer to have
them removed again.
The lack of range checking of the 'extra' output buffer is also
slightly worrying, but I did not check whether this could cause
harm.
Fixes: 2b42bd58b3 ("staging: r8188eu: introduce new os_dep dir for RTL8188eu driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210920095525.1150678-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without CONFIG_COMMON_CLK, this fails to link:
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c':
ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate'
arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev'
arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach':
ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate'
Fixes: a7e1abad13 ("ptp: Add clock driver for the OpenCompute TimeCard.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device ZTE 0x0094 is already on the list.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Fixes: b9e44fe5ec ("USB: option: cleanup zte 3g-dongle's pid in option.c")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
0xac24 device ID is already defined and used via
BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list.
Fixes: 27f1281d5f ("USB: serial: Extra device/vendor ID for mos7840 driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS
+ 1. Because the first TX BD for a packet is always a long TX BD, we
need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with
this value to make this more clear. The current code uses a minimum
that is off by 1. Fix it using this constant.
The tx_wake_thresh to determine when to wake up the TX queue is half the
ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next
packet which may have maximum fragments. So the comparison of the
available TX BDs with tx_wake_thresh should be >= instead of > in the
current code. Otherwise, at the smallest ring size, we will never wake
up the TX queue and will cause TX timeout.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadocm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The resilient nexthop group torture tests in fib_nexthop.sh exposed a
possible division by zero while replacing a resilient group [1]. The
division by zero occurs when the data path sees a resilient nexthop
group with zero buckets.
The tests replace a resilient nexthop group in a loop while traffic is
forwarded through it. The tests do not specify the number of buckets
while performing the replacement, resulting in the kernel allocating a
stub resilient table (i.e, 'struct nh_res_table') with zero buckets.
This table should never be visible to the data path, but the old nexthop
group (i.e., 'oldg') might still be used by the data path when the stub
table is assigned to it.
Fix this by only assigning the stub table to the old nexthop group after
making sure the group is no longer used by the data path.
Tested with fib_nexthops.sh:
Tests passed: 222
Tests failed: 0
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1850 Comm: ping Not tainted 5.14.0-custom-10271-ga86eb53057fe #1107
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
RIP: 0010:nexthop_select_path+0x2d2/0x1a80
[...]
Call Trace:
fib_select_multipath+0x79b/0x1530
fib_select_path+0x8fb/0x1c10
ip_route_output_key_hash_rcu+0x1198/0x2da0
ip_route_output_key_hash+0x190/0x340
ip_route_output_flow+0x21/0x120
raw_sendmsg+0x91d/0x2e10
inet_sendmsg+0x9e/0xe0
__sys_sendto+0x23d/0x360
__x64_sys_sendto+0xe1/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: stable@vger.kernel.org
Fixes: 283a72a559 ("nexthop: Add implementation of resilient next-hop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The process will cause napi.state to contain NAPI_STATE_SCHED and
not in the poll_list, which will cause napi_disable() to get stuck.
The prefix "NAPI_STATE_" is removed in the figure below, and
NAPI_STATE_HASHED is ignored in napi.state.
CPU0 | CPU1 | napi.state
===============================================================================
napi_disable() | | SCHED | NPSVC
napi_enable() | |
{ | |
smp_mb__before_atomic(); | |
clear_bit(SCHED, &n->state); | | NPSVC
| napi_schedule_prep() | SCHED | NPSVC
| napi_poll() |
| napi_complete_done() |
| { |
| if (n->state & (NPSVC | | (1)
| _BUSY_POLL))) |
| return false; |
| ................ |
| } | SCHED | NPSVC
| |
clear_bit(NPSVC, &n->state); | | SCHED
} | |
| |
napi_schedule_prep() | | SCHED | MISSED (2)
(1) Here return direct. Because of NAPI_STATE_NPSVC exists.
(2) NAPI_STATE_SCHED exists. So not add napi.poll_list to sd->poll_list
Since NAPI_STATE_SCHED already exists and napi is not in the
sd->poll_list queue, NAPI_STATE_SCHED cannot be cleared and will always
exist.
1. This will cause this queue to no longer receive packets.
2. If you encounter napi_disable under the protection of rtnl_lock, it
will cause the entire rtnl_lock to be locked, affecting the overall
system.
This patch uses cmpxchg to implement napi_enable(), which ensures that
there will be no race due to the separation of clear two bits.
Fixes: 2d8bff1269 ("netpoll: Close race condition between poll_one_napi and napi_disable")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom and Jiapeng's fixes address smatch warnings around missing return
values in error cases.
Russ' change addresses an issue where registers are being accessed too
early resulting in invalid data being read.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIUEABYIAC0WIQSdhnt2PwibB65UG0C3mJX/Vsn7uQUCYUe/xg8cbWRmQGtlcm5l
bC5vcmcACgkQt5iV/1bJ+7mCOAD/dh1bfDDLSrvqyOgvu5cmDN6/E3XqYDGHXQn9
g9tvve8A/2otyCvGYH/18+85hs03HPVAf8b4MQyYZapso4uJIvMK
=LMcp
-----END PGP SIGNATURE-----
Merge tag 'fpga-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-linus
FPGA Manager fixes for 5.15
Tom and Jiapeng's fixes address smatch warnings around missing return
values in error cases.
Russ' change addresses an issue where registers are being accessed too
early resulting in invalid data being read.
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my fixes branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: dfl: Avoid reads to AFU CSRs during enumeration
fpga: machxo2-spi: Fix missing error code in machxo2_write_complete()
fpga: machxo2-spi: Return an error on failure
- Fix potential race when user waiting for interrupt ioctl
- Prevent possible kernel oops in staged CS ioctl
- Use direct MSI mechanism in Gaudi as a WA for a H/W issue
regarding FLR
- Don't support collective wait ioctl operation when it
is not supported. e.g. when the NIC ports are disabled
- Fix configuration of one of the security mechanism.
- Change error print to be rate-limited as it can be initiated
by the user and spam the kernel log
- Fix return value of CS ioctl when doing staged CS
- Fix CS ioctl code when user doesn't supply an offset for
the memory area that we use as fence.
- Spelling mistake fix
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmFG7bAACgkQZR1NuKta
54D4vQf/T477hf2MKKIHdEyCUs601smNqK9VcEm5SNRUiqRo3cEyjMPY/OUqINga
6jcvWGsnxv1COL0EF3TxHfTN12Lzdli2emCk7h2ErADVB5UqZmS7uYEh/20M67nX
KPDa5fm9Ah0SjKmocq114xqjJvUkOryB8+x2T8BCQXmuS5jBGoe0vuLKtZKcPtCp
y+ErR6X8srBv+U1Lb2b1u3JAAsgOg2L7BixaBPnWp/hjqNe+RW+WAEqfWUj2AUfl
yZNKuI9DRcKOjqoSqwCG8CxpwsZthiYs3a1wYTE8GpNXGeXxDnS02sbvPcudEQAc
seOkIAbsBNgNSYc110BQSVzZErcdtw==
=Rzaf
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-fixes-2021-09-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus
Oded writes:
This tag contains the following fixes for 5.15-rc3:
- Fix potential race when user waiting for interrupt ioctl
- Prevent possible kernel oops in staged CS ioctl
- Use direct MSI mechanism in Gaudi as a WA for a H/W issue
regarding FLR
- Don't support collective wait ioctl operation when it
is not supported. e.g. when the NIC ports are disabled
- Fix configuration of one of the security mechanism.
- Change error print to be rate-limited as it can be initiated
by the user and spam the kernel log
- Fix return value of CS ioctl when doing staged CS
- Fix CS ioctl code when user doesn't supply an offset for
the memory area that we use as fence.
- Spelling mistake fix
* tag 'misc-habanalabs-fixes-2021-09-19' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
habanalabs: expose a single cs seq in staged submissions
habanalabs: fix wait offset handling
habanalabs: rate limit multi CS completion errors
habanalabs/gaudi: fix LBW RR configuration
habanalabs: Fix spelling mistake "FEADBACK" -> "FEEDBACK"
habanalabs: fail collective wait when not supported
habanalabs/gaudi: use direct MSI in single mode
habanalabs: fix kernel OOPs related to staged cs
habanalabs: fix potential race in interrupt wait ioctl
This should be the dai for display port. Without this set properly we
fail to get audio routed through external displays on trogdor. It looks
like we picked up v4[1] of this patch when there was a v7[2]. The v7
patch still had the wrong sound-dai but at least we can fix all this up
and audio works.
Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: b22d313e17 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI")
Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1]
Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
The legacy clock names (including the _clk suffix) was dropped from the
driver, so update the dts accordingly).
Tested on Nexus 7 2013, no functional changes.
Signed-off-by: David Heidelberg <david@ixit.cz>
[bjorn: Updated commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
Attempt to mount 9p file system as root gives the following kernel panic:
9pnet_virtio: no channels available for device root
Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc1+ #127
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
panic+0x1e2/0x44b
? __warn_printk+0xf3/0xf3
? free_unref_page+0x2d4/0x4a0
? trace_hardirqs_on+0x32/0x120
? free_unref_page+0x2d4/0x4a0
mount_root+0x189/0x1e0
prepare_namespace+0x136/0x165
kernel_init_freeable+0x3b8/0x3cb
? rest_init+0x2e0/0x2e0
kernel_init+0x19/0x130
ret_from_fork+0x1f/0x30
Kernel Offset: disabled
---[ end Kernel panic - not syncing: VFS: Unable to mount root "root" (9p), err=-2 ]---
QEMU command line:
"qemu-system-x86_64 -append root=/dev/root rw rootfstype=9p rootflags=trans=virtio ..."
This error is because root_device_name is truncated in prepare_namespace() from
being "/dev/root" to be "root" prior to call to mount_nodev_root().
As a solution, don't treat errors in mount_nodev_root() as errors that
require panics and allow failback to the mount flow that existed before
patch citied in Fixes tag.
Fixes: f9259be6a9 ("init: allow mounting arbitrary non-blockdevice filesystems as root")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
split_fs_names() currently takes comma separate list of filesystems
and converts it into individual filesystem strings. Pleaces these
strings in the input buffer passed by caller and returns number of
strings.
If caller manages to pass input string bigger than buffer, then we
can write beyond the buffer. Or if string just fits buffer, we will
still write beyond the buffer as we append a '\0' byte at the end.
Pass size of input buffer to split_fs_names() and put enough checks
in place so such buffer overrun possibilities do not occur.
This patch does few things.
- Add a parameter "size" to split_fs_names(). This specifies size
of input buffer.
- Use strlcpy() (instead of strcpy()) so that we can't go beyond
buffer size. If input string "names" is larger than passed in
buffer, input string will be truncated to fit in buffer.
- Stop appending extra '\0' character at the end and avoid one
possibility of going beyond the input buffer size.
- Do not use extra loop to count number of strings.
- Previously if one passed "rootfstype=foo,,bar", split_fs_names()
will return only 1 string "foo" (and "bar" will be truncated
due to extra ,). After this patch, now split_fs_names() will
return 3 strings ("foo", zero-sized-string, and "bar").
Callers of split_fs_names() have been modified to check for
zero sized string and skip to next one.
Reported-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The Qualcomm Secure Channel Manager (SCM) is only present on Qualcomm
SoCs. All drivers using it select QCOM_SCM, and depend on ARCH_QCOM.
Until recently, QCOM_SCM was an invisible symbol, but this was changed
by adding loadable module support, exposing it to all ARM and ARM64
users. Hence add a dependency on ARCH_QCOM, to prevent asking the user
about this driver when configuring a kernel without Qualcomm SoC
support.
While at it, drop the dependency on ARM || ARM64, as that is implied by
HAVE_ARM_SMCCC.
Fixes: b42000e4b8 ("firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module")
Fixes: 2954a6f12f ("firmware: qcom-scm: Fix QCOM_SCM configuration")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/5cda77085c07dc2e8d2195507b287457cb2f09e9.1629807831.git.geert+renesas@glider.be
PT_LOAD type denotes that the segment should be loaded into the final
firmware memory region. Hash segment is not one such, because it's only
needed for PAS init and shouldn't be in the final firmware memory region.
That's why mdt_phdr_valid() explicitly reject non PT_LOAD segment and
hash segment. This actually makes the hash segment type check in
qcom_mdt_read_metadata() unnecessary and redundant. For a hash segment,
it won't be loaded into firmware memory region anyway, due to the
QCOM_MDT_TYPE_HASH check in mdt_phdr_valid(), even if it has a PT_LOAD
type for some reason (misusing or abusing?).
Some firmware files on Sony phones are such examples, e.g WCNSS firmware
of Sony Xperia M4 Aqua phone. The type of hash segment is just PT_LOAD.
Drop the unnecessary hash segment type check in qcom_mdt_read_metadata()
to fix firmware loading failure on these phones, while hash segment is
still kept away from the final firmware memory region.
Fixes: 498b98e939 ("soc: qcom: mdt_loader: Support loading non-split images")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210828070202.7033-1-shawn.guo@linaro.org
Upstream commit 2e01e0c214 ("arm64: dts: qcom: sdm850-yoga:
Enable IPA") shuffled reserved memory regions in sdm845.dtsi
to make firmware loading succeed and enable the ipa device on
sdm845-yoga but it broke the other common users of those
memory regions like Xiaomi Pocophone F1.
So this patch effectively revert those upstream commit changes
and move all the relevant changes to sdm850-lenovo-yoga-c630.dts
instead.
Fixes: 2e01e0c214 ("arm64: dts: qcom: sdm850-yoga: Enable IPA")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea00076 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.
It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.
Famous last words.
Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is. It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.
Let's see what odd architecture did something else strange in this area
to break things. But my arm64 cross build is clean.
Fixes: 9caea00076 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked not
present in the higher level page table, correctly instead of blindly
dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the mixture
of inclusive and exclusive ranges. memtype_reserve() expect 'end' being
exclusive, but sanitize_phys() wants it inclusive. This worked so far,
but with end being the end of the physical address space the fail is
exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed
the previous maximum.
-----BEGIN PGP SIGNATURE-----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=7cq3
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked
not present in the higher level page table, correctly instead of
blindly dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the
mixture of inclusive and exclusive ranges. memtype_reserve() expect
'end' being exclusive, but sanitize_phys() wants it inclusive. This
worked so far, but with end being the end of the physical address
space the fail is exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
exceed the previous maximum.
* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid infinite loop for copy from user recovery
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
x86/platform: Increase maximum GPIO number for X86_64
x86/pat: Pass valid address to sanitize_phys()
checked and then reread which makes all the checks invalid. Reuse the
already read value instead.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmFHI58THHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoak6D/sFWa96kI6RAZFDh079SpSTRHq/TTR8
4qo0Y/OIlbd8qdLF/v8w1H+vjNJAJGR4yV+YJOvVp0DG50CySETsClfAZ6yED+LV
ZlCzIrQx39BswQUlSsaQBUJzr2AenntSAlMHNvVhXs6eSS6BkuKfgBF05Z1Z7N0/
grXWGs2Os9NHXruJ53zsrilg/kvsuNKt1wOBx3TA/RYAtmqAvuGSwHFgbHYb9Jbx
OkmGPl6xZvZuhVfMOwkU+CFwf4ODPjj564D1nDCmSbgxrKMx7ytJVkMTYzvh20SM
5dUlnSUAHI6rn6ax3i/Sm0SLz3scKS8NqAaDTGUE9M37ahTnmP1GniilsEU8QDpt
gR8rTPQT4ZPrnFR2a2r0Xy01e8hwTyJD2ApOUCY1I84nuxW8lmSgK2nXYYlXVCmL
QIL0PLcqAMYpJ78U2Wc5iJ6AbMCxMP/2CNeW5yDGPP/GiIBnr6aFX7bd+vw2zVfJ
Z4yhgRhge3IvShAlUVht+NG4sM2FrUCT3CozYY17kHZHPfGf1aYvuev+WCwXMPMZ
ILOCLr/KNYNIlxV1RPuNuR+ZZCl6/RJx8hufBMio5xhyGVrokSdrhI0AGleHyym/
Z/h59MrP425qLKdpP3eBcOyuHLkvGXztQ/ITpEVnqAuTvX+Pw3MJBZezcAb/aKIZ
YEDFCqoQu5RVfw==
=z1/t
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
checked and then reread which makes all the checks invalid. Reuse the
already read value instead"
* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
events: Reuse value read using READ_ONCE instead of re-reading it
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler.
-----BEGIN PGP SIGNATURE-----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=nwT0
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler"
[ This plays ugly games with atomic_add_return_release() because we
don't have a plain atomic_add_release(), and should really be cleaned
up, I think - Linus ]
* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwbase: Take care of ordering guarantee for fastpath reader
locking/rwbase: Extract __rwbase_write_trylock()
locking/rwbase: Properly match set_and_save_state() to restore_state()
Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction
is active, on Power9 or later.
Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode.
Fix crashes when handling machine checks in LPARs using the Hash MMU.
Partly revert a recent change to our XICS interrupt controller code, which broke the
recently added Microwatt support.
Thanks to: Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmFHDfsTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgNlAD/oC/14jV2fCv54vH5Al1XAz2WuPhhEu
UsN+MLlx7JshXfLeGzzEogvvakfLFuVkpIxsv+g8a9H6jejjCj/A4wjUy34Im0hS
nhsMsa1vZPZY/Vz9v3WzdYmqjHVZDKo6ZdUmn0z4OjPnv7wQaEEbaXmoe0+CaXXQ
jIY2TjVQxbgXeUI1QcPUWh36hiSaYn4O8fAD4VdjxdStl2z6q8zbo/5nzQ8dkBpP
lldC0T/HRCKLe1ODUExFfbBFqFuLVdbALq0RIuh0GXd+dAqpK1iOkNsxUWChU6Q7
gu0PrmhRydX3bmL9jmOsZfUk/hIR0fEgwSGITQAb8v0LCvZI0JRn+yvkl7uVZ9Ce
OWY7B8HZQldvoQqA4/f7YCpAIS2ag7ugDrcAfuDVkDl2o/qJHoTi58IU24wI6+LL
lwJZjNJoxZ8n1tl1l+gtCNp4E4YYOfuKZi0zH0oJoLiSWeK6PYOvwEGuEC2iQ9cJ
BEdyYVXqSBuc2anCQ4k+y8gu/zJwP1MCpDNMPMU4P/JcaG9lnrLUhvctf4GKtOSy
UiktHSTL52J5ldMxSMicpw9qCVgePsQX78Sk3UTHRilRmix6TtWOWYslm4mL+zeD
u3wpnK+NKkju72LRS/AB1U6cWvModW+WBANPws9j6caoOorh397xsDGEYiKWvp0Z
xSG/dzXzi2oscQ==
=yC9U
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when scv (System Call Vectored) is used to make a syscall
when a transaction is active, on Power9 or later.
- Fix bad interactions between rfscv (Return-from scv) and Power9
fake-suspend mode.
- Fix crashes when handling machine checks in LPARs using the Hash MMU.
- Partly revert a recent change to our XICS interrupt controller code,
which broke the recently added Microwatt support.
Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.
* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xics: Set the IRQ chip data for the ICS native backend
powerpc/mce: Fix access error in mce handler
KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
powerpc/64s: system call rfscv workaround for TM bugs
selftests/powerpc: Add scv versions of the basic TM syscall tests
powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
-----BEGIN PGP SIGNATURE-----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=EBGX
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
x86/build: Do not add -falign flags unconditionally for clang
kbuild: Fix comment typo in scripts/Makefile.modpost
sh: Add missing FORCE prerequisites in Makefile
gen_compile_commands: fix missing 'sys' package
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
- Fix ip display in 'perf script' when output type != attr->type.
- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
fixing the build with libbpf v0.6+.
- Make use of FD() robust in libperf, fixing a segfault with 'perf stat --iostat list'.
- Initialize addr_location:srcline pointer to NULL when resolving
callchain addresses.
- Fix fused instruction logic for assembly functions in 'perf annotate'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYUZ+YgAKCRCyPKLppCJ+
JwF3AP9q5lcFHsYfFYmQj9U5UPIXm9A94Y7/9r5nHbVGig8Y0wEAgIBWHj3paCaZ
P0d0MQX7lQ7/wC5o+wlXJueUb0h8ZgE=
=uPbL
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix ip display in 'perf script' when output type != attr->type.
- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
fixing the build with libbpf v0.6+.
- Make use of FD() robust in libperf, fixing a segfault with 'perf stat
--iostat list'.
- Initialize addr_location:srcline pointer to NULL when resolving
callchain addresses.
- Fix fused instruction logic for assembly functions in 'perf
annotate'.
* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
libperf evsel: Make use of FD robust.
perf machine: Initialize srcline string member in add_location struct
perf script: Fix ip display when type != attr->type
perf annotate: Fix fused instr logic for assembly functions
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().
That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.
Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there. But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.
If somebody actually uses this driver on an alpha and this fixes it for
you, please email me. Because that is just incredibly bizarre.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the previous commit (9caea00076: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.
Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.
Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.
Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().
Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59fc ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commits
9984d6664c ("drm/vc4: hdmi: Make sure the controller is powered in detect")
411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfd: "Merge tag 'drm-next-2021-07-01' of git://.../drm").
Revert these two commits until it's been resolved.
Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code was refactored and the mutex_unlock(&mvm->mutex); was
accidentally deleted.
Fixes: af3aab9ce2 ("iwlwifi: mvm: d3: make key reprogramming iteration optional")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081849.GB9846@kili
These should be >= ARRAY_SIZE() instead of > ARRAY_SIZE() to prevent an
out of bounds write on the next line.
Fixes: 79e561f0f0 ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Luca Coelho <luca@coelho.fi>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210831081802.GA9846@kili
Makefile uses TEST_PROGS instead of TEST_GEN_PROGS to define
executables. TEST_PROGS is for shell scripts that need to be
installed and run by the common lib.mk framework. The common
framework doesn't touch TEST_PROGS when it does build and clean.
As a result "make kselftest-clean" and "make clean" fail to remove
executables. Run and install work because the common framework runs
and installs TEST_PROGS. Build works because the Makefile defines
"all" rule which is unnecessary if TEST_GEN_PROGS is used.
Use TEST_GEN_PROGS so the common framework can handle build/run/
install/clean properly.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Any link state change that's done prior to net device registration
isn't reflected on the state, thus the operational state is left
obsolete, with 'UNKNOWN' status.
To resolve the issue, query link state from FW upon open operations
to ensure operational state is updated.
Fixes: c27a02cd94 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the args to fprintf(). Splitting the message ends up passing
incorrect arg for "sigurg %d" and an extra arg overall. The test
result message ends up incorrect.
test_unix_oob.c: In function ‘main’:
test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=]
274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
| ~^
| |
| int
| %s
275 | "atmark %d\n", signal_recvd, len, oob, atmark);
| ~~~~~~~~~~~~~
| |
| char *
test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args]
274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the inclusion of nvmem handling into the mac-address getter
function of_get_mac_address() by
commit d01f449c00 ("of_net: add NVMEM support to of_get_mac_address")
it is now possible to get a -EPROBE_DEFER return code. Which did cause
bgmac to assign a random ethernet address.
This exact issue happened on my Meraki MR32. The nvmem provider is
an EEPROM (at24c64) which gets instantiated once the module
driver is loaded... This happens once the filesystem becomes available.
With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
Then the driver subsystem will reschedule the probe at a later time.
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Michael Walle <michael@walle.cc>
Fixes: d01f449c00 ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 86f8b1c01a ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.
Commit fb6ec87f72 ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.
Commit 08156ba430 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.
When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:
devlink_port_unregister:
WARN_ON(!list_empty(&devlink_port->region_list));
So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.
Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.
But DSA's layering stays in our way quite badly here.
The options I've considered are:
1. Introduce a function in devlink to just change a port's type and
flavour. No dice, devlink keeps a lot of state, it really wants the
port to not be registered when you set its parameters, so changing
anything can only be done by destroying what we currently have and
recreating it.
2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
and the region returned, keep those in a list, then when the devlink
port unregister needs to take place, the existing devlink regions are
destroyed by DSA, and we replay the creation of new regions using the
cached parameters. Problem: mv88e6xxx keeps the region pointers in
chip->ports[port].region, and these will remain stale after DSA frees
them. There are many things DSA can do, but updating mv88e6xxx's
private pointers is not one of them.
3. Just let the driver do it (i.e. introduce a very specific method
called ds->ops->port_reinit_as_unused, which unregisters its devlink
port devlink regions, then the old devlink port, then registers the
new one, then the devlink port regions for it). While it does work,
as opposed to the others, it's pretty horrible from an API
perspective and we can do better.
4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
which in the case of mv88e6xxx must register and unregister the
devlink port regions. Call these 2 methods when the port must be
reinitialized as unused.
Naturally, I went for the 4th approach.
Fixes: 08156ba430 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Foster says:
====================
ocelot phylink fixes
When the ocelot driver was migrated to phylink, e6e12df625 ("net:
mscc: ocelot: convert to phylink") there were two additional writes to
registers that became stale. One write was to DEV_CLOCK_CFG and one was
to ANA_PFC_PCF_CFG.
Both of these writes referenced the variable "speed" which originally
was set to OCELOT_SPEED_{10,100,1000,2500}. These macros expand to
values of 3, 2, 1, or 0, respectively. After the update, the variable
speed is set to SPEED_{10,100,1000,2500} which expand to 10, 100, 1000,
and 2500. So invalid values were getting written to the two registers,
which would lead to either a lack of functionality or undefined
funcationality.
Fixing these values was the intent of v1 of this patch set - submitted
as "[PATCH v1 net] net: ethernet: mscc: ocelot: bug fix when writing MAC
speed"
During that review it was determined that both writes were actually
unnecessary. DEV_CLOCK_CFG is a duplicate write, so can be removed
entirely. This was accidentally submitted as as a new, lone patch titled
"[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to
DEV_CLOCK_CFG". This is part of what is considered v2 of this patch set.
Additionally, the write to ANA_PFC_PFC_CFG is also unnecessary. Priority
flow contol is disabled, so configuring it is useless and should be
removed. This was also submitted as a new, lone patch titled "[PATCH v1
net] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG".
This is the rest of what is considered v2 of this patch set.
v3
Identical to v2, but fixes the patch numbering to v3 and submitting the
two changes as a patch set.
v2
Note: I misunderstood and submitted two new "v1" patches instead of a
single "v2" patch set.
- Remove the buggy writes altogher
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.
Fixes: e6e12df625 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.
Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.
Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.
Fixes: e6e12df625 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.
sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.
lock_sock_nested() is a straight forward 'mutex' lock operation:
might_sleep();
spin_lock_bh(sock::sk_lock.slock)
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.
But that's from the lockdep perspective still the wrong place:
1) The mutex_acquire() is issued _after_ the successful acquisition which
is pointless because in a dead lock scenario this point is never
reached which means that if the deadlock is the first instance of
exposing the wrong lock order lockdep does not have a chance to detect
it.
2) It only works because lockdep is rather lax on the context from which
the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
and therefore non-preemptible region is obviously invalid, except for a
trylock which is clearly not the case here.
This 'works' stops working on RT enabled kernels where the bottom halves
serialization is done via a local lock, which exposes this misplacement
because the 'mutex' and the local lock nest the wrong way around and
lockdep complains rightfully about a lock inversion.
The placement is wrong since the initial commit a5b5bb9a05 ("[PATCH]
lockdep: annotate sk_locks") which introduced this.
Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.
lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:
spin_lock_bh(sock::sk_lock.slock)
if (!sock::sk_lock.owned)
return false;
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
return true;
But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.
In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().
Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.
As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.
The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.
Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
