This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Lars Poeschel <poeschel@lemonage.de>
Link: https://lore.kernel.org/r/20200716120318.127176-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Link: https://lore.kernel.org/r/20200716100638.112451-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add_nested() and
gpiochip_set_nested_irqchip(). The irqchip is instead
added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200716093459.76378-1-linus.walleij@linaro.org
The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs.
Tie them in to enable CPU frequency scaling.
The original Bananapi M2 Plus H5 is left out for now, as adding
the fixed regulator along with the enable pin seemed to cause some
glitching in Linux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org
The Libre Computer ALL-H3-CC H5 variant can work with the standard H5
OPPs. Tie them in to enable CPU frequency scaling.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org
Add an OPP (Operating Performance Points) table for the CPU cores for
boards to include to DVFS (Dynamic Voltage & Frequency Scaling) on the
H5. The table originates from Armbian, but the maximum voltage is raised
slightly to account for boards using slightly higher voltages.
The table and tie in to the CPU cores are put in a separate dtsi file
that board files can include to opt in. Or they can define their own
tables if the standard one does not fit.
This has been tested on the Libre Computer ALL-H3-CC-H5 and the Bananapi
M2+ v1.2 H5, both with adequate cooling. The former has a fixed 1.2V
regulator, while the latter has a GPIO controlled regulator switchable
between 1.1V and 1.3V.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-7-wens@kernel.org
This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org
The ARM CPU cores are fed by the CPU clock from the CCU. Add a
reference to the clock for each CPU core, along with the clock
transition latency.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-5-wens@kernel.org
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.
The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-4-wens@kernel.org
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.
Assign the same regulator supply to the remaining CPU cores to address
this.
Fixes: 6eeb4180d4 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-3-wens@kernel.org
The device tree currently only assigns the a supply for the first CPU
core, when in reality the regulator supply is shared by all four cores.
This might cause an issue if the implementation does not realize the
sharing of the supply.
Assign the same regulator supply to the remaining CPU cores to address
this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-2-wens@kernel.org
This configuration is for EHL with the RT5660 codec. RT5660
should use "10EC5660" ID instead of "INTC1027".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200717211337.31956-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Use a bit-mask of EOF irqs to determine when all required idmac
channel EOFs have been received for a tile conversion, and only do
tile completion processing after all EOFs have been received. Otherwise
it was found that a conversion would stall after the completion of a
tile and the start of the next tile, because the input/read idmac
channel had not completed and entered idle state, thus locking up the
channel when attempting to re-start it for the next tile.
Fixes: 0537db801b ("gpu: ipu-v3: image-convert: reconfigure IC per tile")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Combine the rotate_irq() and norotate_irq() handlers into a single
eof_irq() handler.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
RGB32 and BGR32 formats were inadvertently removed from the switch
statement in ipu_pixelformat_to_colorspace(). Restore them.
Fixes: a59957172b ("gpu: ipu-v3: enable remaining 32-bit RGB V4L2 pixel formats")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Both of the two LVDS channels should be disabled for split mode
in the encoder's ->disable() callback, because they are enabled
in the encoder's ->enable() callback.
Fixes: 6556f7f82b ("drm: imx: Move imx-drm driver out of staging")
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We do some string parsing and string comparison in front of
drm_of_find_panel_or_bridge(). All this work is useless if the call
fails. Move drm_of_find_panel_or_bridge() infront of the parsing work to
fail early.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since commit 5e501ed725 ("drm/imx: imx-ldb: allow to determine bus
format from the connected panel") the enum isn't used anymore. Drop it
to cleanup the code a bit.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The best_encoder() callback is used by the drm-core to find an encoder
if the connector is connected to multiple encoders but the parallel, tve
and ldb uses always the 1-encoder : 1-connector setup. Such a simple
setup can be handled by the drm-core.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add missing regulator_disable() as devm_action to avoid dedicated
unbind() callback and fix the missing error handling.
Fixes: fcbc51e54d ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The bus_flags handling logic does not seem to cover all potential
usecases. Specifically, this seems to fail with an "edt,etm0700g0edh6"
display attached to an 24bit display interface, with interface-pix-fmt
= "rgb24" set in DT.
This patch fixes the problem by overriding the imx_crtc_state->bus_flags
from the imxpd->bus_flags only if the DT property "interface-pix-fmt" is
present or if the DI provides no formats.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Component driver structures allocated with devm_kmalloc() in bind() are
freed automatically after unbind(). Since the contained drm structures
are accessed afterwards in drm_mode_config_cleanup(), move the
allocation into probe() to extend the driver structure's lifetime to the
lifetime of the device. This should eventually be changed to use drm
resource managed allocations with lifetime of the drm device.
We also need to ensure that all componets are available during the
unbind() so we need to call component_unbind_all() before we free
non-devres resources like planes.
Note this patch fixes the the use after free bug but introduces a
possible boot loop issue. The issue is triggered if the HDMI support is
enabled and a component driver always return -EPROBE_DEFER, see
discussion [1] for more details.
[1] https://lkml.org/lkml/2020/3/24/1467
Fixes: 17b5001b51 ("imx-drm: convert to componentised device support")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix: fix imx_tve_probe()]
[m.felsch@pengutronix: resort component_unbind_all())
[m.felsch@pengutronix: adapt commit message]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
UAMOR values are not application-specific. The kernel initializes
its value based on different reserved keys. Remove the thread-specific
UAMOR value and don't switch the UAMOR on context switch.
Move UAMOR initialization to key initialization code and remove
thread_struct.uamor because it is not used anymore.
Before commit: 4a4a5e5d2a ("powerpc/pkeys: key allocation/deallocation must not change pkey registers")
we used to update uamor based on key allocation and free.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-20-aneesh.kumar@linux.ibm.com
As we kexec across kernels that use AMR/IAMR for different purposes
we need to ensure that new kernels get kexec'd with a reset value
of AMR/IAMR. For ex: the new kernel can use key 0 for kernel mapping and the old
AMR value prevents access to key 0.
This patch also removes reset if IAMR and AMOR in kexec_sequence. Reset of AMOR
is not needed and the IAMR reset is partial (it doesn't do the reset
on secondary cpus) and is redundant with this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-19-aneesh.kumar@linux.ibm.com
Parse storage keys related device tree entry in early_init_devtree
and enable MMU feature MMU_FTR_PKEY if pkeys are supported.
MMU feature is used instead of CPU feature because this enables us
to group MMU_FTR_KUAP and MMU_FTR_PKEY in asm feature fixup code.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-14-aneesh.kumar@linux.ibm.com
The hypervisor can return less than max allowed pkey (for ex: 31) instead
of 32. We should mark all the pkeys above max allowed as reserved so
that we avoid the allocation of the wrong pkey(for ex: key 31 in the above
case) by userspace.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-13-aneesh.kumar@linux.ibm.com
initial_allocation_mask is not used outside this file.
Also mark reserved_allocation_mask and initial_allocation_mask __ro_after_init;
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-12-aneesh.kumar@linux.ibm.com
Make the default value FALSE (pkey enabled) and set to TRUE when we
find the total number of keys supported to be zero.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-10-aneesh.kumar@linux.ibm.com
Add documentation explaining the execute_only_key. The reservation and initialization mask
details are also explained in this patch.
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-7-aneesh.kumar@linux.ibm.com
This number the pkey bit such that it is easy to follow. PKEY_BIT0 is
the lower order bit. This makes further changes easy to follow.
No functional change in this patch other than linux page table for
hash translation now maps pkeys differently.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-3-aneesh.kumar@linux.ibm.com
We are wrongly using CPU_FTRS_POWER8 to check for P8 support. Instead, we should
use PVR value. Now considering we are using CPU_FTRS_POWER8, that
implies we returned true for P9 with older firmware. Keep the same behavior
by checking for P9 PVR value.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709032946.881753-2-aneesh.kumar@linux.ibm.com
Subscribe to the MCE notification and add the physical address which
generated a memory error to nvdimm bad range.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-2-santosh@fossix.org
Introduce notification chain which lets us know about uncorrected memory
errors(UE). This would help prospective users in pmem or nvdimm subsystem
to track bad blocks for better handling of persistent memory allocations.
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709135142.721504-1-santosh@fossix.org
To enable memory unplug without splitting kernel page table
mapping, we force the max mapping size to the LMB size. LMB
size is the unit in which hypervisor will do memory add/remove
operation.
Pseries systems supports max LMB size of 256MB. Hence on pseries,
we now end up mapping memory with 2M page size instead of 1G. To improve
that we want hypervisor to hint the kernel about the hotplug
memory range. That was added that as part of
commit b6eca183e2 ("powerpc/kernel: Enables memory
hot-remove after reboot on pseries guests")
But PowerVM doesn't provide that hint yet. Once we get PowerVM
updated, we can then force the 2M mapping only to hot-pluggable
memory region using memblock_is_hotpluggable(). Till then
let's depend on LMB size for finding the mapping page size
for linear range.
With this change KVM guest will also be doing linear mapping with
2M page size.
The actual TLB benefit of mapping guest page table entries with
hugepage size can only be materialized if the partition scoped
entries are also using the same or higher page size. A guest using
1G hugetlbfs backing guest memory can have a performance impact with
the above change.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Fold in fix from Aneesh spotted by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-5-aneesh.kumar@linux.ibm.com
We split the page table mapping on memory unplug if the
linear range was mapped with huge page mapping (for ex: 1G)
The page table splitting code has a few issues:
1. Recursive locking
--------------------
Memory unplug path takes cpu_hotplug_lock and calls stop_machine()
for splitting the mappings. However stop_machine() takes
cpu_hotplug_lock again causing deadlock.
2. BUG: sleeping function called from in_atomic() context
---------------------------------------------------------
Memory unplug path (remove_pagetable) takes init_mm.page_table_lock
spinlock and later calls stop_machine() which does wait_for_completion()
3. Bad unlock unbalance
-----------------------
Memory unplug path takes init_mm.page_table_lock spinlock and calls
stop_machine(). The stop_machine thread function runs in a different
thread context (migration thread) which tries to release and reaquire
ptl. Releasing ptl from a different thread than which acquired it
causes bad unlock unbalance.
These problems can be avoided if we avoid mapping hot-plugged memory
with 1G mapping, thereby removing the need for splitting them during
unplug. The kernel always make sure the minimum unplug request is
SUBSECTION_SIZE for device memory and SECTION_SIZE for regular memory.
In preparation for such a change remove page table splitting support.
This essentially is a revert of
commit 4dd5f8a99e ("powerpc/mm/radix: Split linear mapping on hot-unplug")
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-4-aneesh.kumar@linux.ibm.com
We can hit the following BUG_ON during memory unplug:
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:342!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
NIP [c000000000093308] pmd_fragment_free+0x48/0xc0
LR [c00000000147bfec] remove_pagetable+0x578/0x60c
Call Trace:
0xc000008050000000 (unreliable)
remove_pagetable+0x384/0x60c
radix__remove_section_mapping+0x18/0x2c
remove_section_mapping+0x1c/0x3c
arch_remove_memory+0x11c/0x180
try_remove_memory+0x120/0x1b0
__remove_memory+0x20/0x40
dlpar_remove_lmb+0xc0/0x114
dlpar_memory+0x8b0/0xb20
handle_dlpar_errorlog+0xc0/0x190
pseries_hp_work_fn+0x2c/0x60
process_one_work+0x30c/0x810
worker_thread+0x98/0x540
kthread+0x1c4/0x1d0
ret_from_kernel_thread+0x5c/0x74
This occurs when unplug is attempted for such memory which has
been mapped using memblock pages as part of early kernel page
table setup. We wouldn't have initialized the PMD or PTE fragment
count for those PMD or PTE pages.
This can be fixed by allocating memory in PAGE_SIZE granularity
during early page table allocation. This makes sure a specific
page is not shared for another memblock allocation and we can
free them correctly on removing page-table pages.
Since we now do PAGE_SIZE allocations for both PUD table and
PMD table (Note that PTE table allocation is already of PAGE_SIZE),
we end up allocating more memory for the same amount of system RAM.
Here is a comparision of how much more we need for a 64T and 2G
system after this patch:
1. 64T system
-------------
64T RAM would need 64G for vmemmap with struct page size being 64B.
128 PUD tables for 64T memory (1G mappings)
1 PUD table and 64 PMD tables for 64G vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (128+1+64)*4K=772K
With PAGE_SIZE(64K) table allocations, (128+1+64)*64K=12352K
2. 2G system
------------
2G RAM would need 2M for vmemmap with struct page size being 64B.
1 PUD table for 2G memory (1G mapping)
1 PUD table and 1 PMD table for 2M vmemmap (2M mappings)
With default PUD[PMD]_TABLE_SIZE(4K), (1+1+1)*4K=12K
With new PAGE_SIZE(64K) table allocations, (1+1+1)*64K=192K
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709131925.922266-2-aneesh.kumar@linux.ibm.com
When '029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")'
made GTSE an MMU feature, it was enabled by default in
powerpc-cpu-features but was missed in pa-features. This causes random
memory corruption during boot of PowerNV kernels where
CONFIG_PPC_DT_CPU_FTRS isn't enabled.
Fixes: 029ab30b4c ("powerpc/mm: Enable radix GTSE only if supported.")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[mpe: Unwrap long line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200720044258.863574-1-bharata@linux.ibm.com
