Current xhci debug message doesn't always output bus number, so it's
hard to figure out it's from USB2 or USB3 root hub.
In addition to that, some port numbers are offset to 0 and others are
offset to 1. Use the latter to match the USB core.
So use "bus number - port index + 1" to make debug message consistent.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200723144530.9992-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we have no primary fwnode or when it's a software node, we may end up
in the situation when fwnode is a NULL pointer. There is no point to look for
secondary fwnode in such case. Add a necessary check to a condition.
Fixes: 114dbb4fa7 ("drivers property: When no children in primary, try secondary")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20200716182747.54929-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
X1000 and SoCs after X1000 (such as X1500 and X1830) had a separate
OST, it no longer belongs to TCU. This driver will register both a
clocksource and a sched_clock to the system.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Co-developed-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 漆鹏振 (Qi Pengzhen) <aric.pzqi@ingenic.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200722171804.97559-3-zhouyanjie@wanyeetech.com
Add the OST bindings for the X1000 SoC from Ingenic.
Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200722171804.97559-2-zhouyanjie@wanyeetech.com
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200708165856.15322-1-grandmaster@al2klimov.de
It happens on the U8420-sysclk Ux500 PRCMU firmware
variant that the MTU clock is just 32768 Hz, and in this
mode the minimum ticks is 5 rather than two.
I think this is simply so that there is enough time
for the register write to propagate through the
interconnect to the registers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200628220153.67011-1-linus.walleij@linaro.org
Enable clock event handling on per CPU core basis. Make sure that
interrupts raised on the first core execute event handlers on the
correct CPU core. This driver is required by Ingenic processors
that support SMP/SMT, such as JZ4780 and X2000.
Tested-by: H. Nikolaus Schaller <hns@goldelico.com>
Tested-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200624170749.31762-2-zhouyanjie@wanyeetech.com
Because the DPNIs are probed before DPMCPs and other objects that need
to be allocated, messages like "No more resources of type X left" are
printed by the fsl-mc bus driver. This patch resolves the issue by probing
the allocatable objects first and then any other object that may use
them.
Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200717154800.17169-4-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the spinlock that serializes the MC commands with a raw
spinlock. This is needed for the RT kernel because there are MC
commands sent in interrupt context.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200717154800.17169-3-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MC bus has different types of devices that can be discovered on the
bus. Add the missing device types.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200717154800.17169-2-ioana.ciornei@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception. Since cols and lines are calculated as
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0
and var.yres < vc->vc_font.height makes rows = 0. This means that
const int fd = open("/dev/fb0", O_ACCMODE);
struct fb_var_screeninfo var = { };
ioctl(fd, FBIOGET_VSCREENINFO, &var);
var.xres = var.yres = 1;
ioctl(fd, FBIOPUT_VSCREENINFO, &var);
easily reproduces integer underflow bug explained above.
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6
Reported-and-tested-by: syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot is reporting hung task in wait_for_device_probe() [1]. At least,
we always need to decrement probe_count if we incremented probe_count in
really_probe().
However, since I can't find "Resources present before probing" message in
the console log, both "this message simply flowed off" and "syzbot is not
hitting this path" will be possible. Therefore, while we are at it, let's
also prepare for concurrent wait_for_device_probe() calls by replacing
wake_up() with wake_up_all().
[1] https://syzkaller.appspot.com/bug?id=25c833f1983c9c1d512f4ff860dd0d7f5a2e2c0f
Reported-by: syzbot <syzbot+805f5f6ae37411f15b64@syzkaller.appspotmail.com>
Fixes: 7c35e699c8 ("driver core: Print device when resources present in really_probe()")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20200713021254.3444-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722110649.202223-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722110027.192782-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722105517.186137-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722104820.174654-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722103915.162156-1-linus.walleij@linaro.org
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit call to gpiochip_irqchip_add().
The irqchip is instead added while adding the gpiochip.
Also move the IRQ initialization to the special .init_hw()
callback.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20200722101938.151265-1-linus.walleij@linaro.org
Change the handling of pin config flags from if/else to switch
statement to make the code more readable and cleaner.
Suggested-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722120755.230741-1-drew@beagleboard.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This makes the driver use the irqchip template to assign
properties to the gpio_irq_chip instead of using the
explicit calls to gpiochip_irqchip_add(). The irqchip is
instead added while adding the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Octavian Purdila <octavian.purdila@nxp.com>
Link: https://lore.kernel.org/r/20200722073426.38890-1-linus.walleij@linaro.org
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YzOAQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgY9aB/0folCAovUA97bILQR/62PspVGR1i/S2GJe
sQqKuWDyBtJNM3IYNVMd/AtcrP+U0ZD4MX6TKbabs+ZuIc4EksXRroMTMm2azme1
rOrQuGSKcdhPobJOHlpbSC/QPWWi5GGGWDnwXY8T68NedeYLP/o8sOmZQtUi80R9
ueP5ZwiviwMrVzRITPb8sB89WEyRqaas2H0fc/4OjGRY/jeTKwCk9sP/JytA6gUB
/GXn+uUk5WcRkekujBi1LVi4BIhm7PMW9kM1AHWAV6+2Yd8uFyG4ut9MB7SmaQt8
QfEoPpLvQicpZCVB3VFOPJ38z4YuOXsqo85u8T3ZkgpLdInoa/J9
=GUhq
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Biggest part is the addition of the rk3288 variant of the VMARC
SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes
with it as the underlying Dalang carrier board is shared by both
an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10).
Other than that rk3288 gets its ohci node added that only works
on the fixed rk3288w variant of the soc and some asorted fixes
and improvements for dt-binding-check.
* tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add PCIe for RockPI N10
ARM: dts: rockchip: Add HDMI out for RockPI N8/N10
ARM: dts: rockchip: Add USB for RockPI N8/N10
ARM: dts: rockchip: Add usb host0 ohci node for rk3288
ARM: dts: rockchip: Fix VBUS on rk3288-vyasa
ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support
ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
dt-bindings: arm: rockchip: Add Rock Pi N8 binding
arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier
arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier
arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties
ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM
ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
ARM: dts: rockchip: Add marvell BT irq config
ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
first tiny part of the rk3399 camera infrastructure and cleanups + making
dt-binding-check even happier.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl8YxwgQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdXnB/0eoNoz+ZmX7L3gvPVejBiBBwSUVC21OW+A
c3TtumCUGbHk3lXhb91j+s+qN1sMjOn6tdEAcCVO7gm/FcASXwKcqyKa+/dhLzt5
3/FaXye6THGV/QNk9tZr/hd2XQsg5hwA9Rl3DYJzB4WVWmBiOV3JuwmRlvLqRh7m
AztbZiRvy9f3awWF1XVEW7MYDwVIPmeiGQh6voBYBjTfJyYKCKZDZPcPi4FmRP94
IIlG1NaH3jP8wZVD7yOhxtemY/IPsjFSoSinC7ZksAnRLEUax/AfMsBJQovEfL9M
pkkkI3dxDZ+TokWcGtIaxZSTguV7X2bf5Fxv9UfWCfZ1pvtPB38i
=47gX
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Fuel gauge for Pinebook Pro, the newly added periph-burst flag for pl330s,
first tiny part of the rk3399 camera infrastructure and cleanups + making
dt-binding-check even happier.
* tag 'v5.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac
arm64: dts: rockchip: remove bus-width from mmc nodes in px30 dts files
arm64: dts: rockchip: add rx0 mipi-phy for rk3399
arm64: dts: rockchip: rename and label gpio-led subnodes part 2
arm64: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio
arm64: dts: rockchip: fix rk3399-puma gmac reset gpio
arm64: dts: rockchip: fix rk3399-puma vcc5v0-host gpio
arm64: dts: rockchip: fix rk3368-lion gmac reset gpio
arm64: dts: rockchip: set rockpro64 usbc dr_mode as host
arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts
Link: https://lore.kernel.org/r/2221560.KYr1Tee2JR@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
This patch adds support for usb role switch to dwc2, by using overriding
control of the PHY voltage valid and ID input signals.
iddig signal (ID) can be overridden:
- when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1;
- when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0.
avalid/bvalid/vbusvalid signals can be overridden respectively with:
- GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL
- GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL
- GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL
It is possible to determine valid sessions thanks to usb role switch:
- if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid
- if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid
- if USB_ROLE_HOST then avalid && !bvalid && vbusvalid
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Factor the 12 copies of the SW PAN entry and exit code into callable
subroutines, and use alternatives patching to either emit a 'bl'
instruction to call them, or a NOP if h/w PAN is found to be available
at runtime.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200721083315.4816-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Commit 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB
context save/restore") is using the IPFS 'num_offsets' value when
allocating memory for FPCI context instead of the FPCI 'num_offsets'.
After commit cad064f1bd ("devres: handle zero size in devm_kmalloc()")
was added system suspend started failing on Tegra186. The kernel log
showed that the Tegra XHCI driver was crashing on entry to suspend when
attempting the save the USB context. On Tegra186, the IPFS context has a
zero length but the FPCI content has a non-zero length, and because of
the bug in the Tegra XHCI driver we are incorrectly allocating a zero
length array for the FPCI context. The crash seen on entering suspend
when we attempt to save the FPCI context and following commit
cad064f1bd ("devres: handle zero size in devm_kmalloc()") this now
causes a NULL pointer deference when we access the memory. Fix this by
correcting the amount of memory we are allocating for FPCI contexts.
Cc: stable@vger.kernel.org
Fixes: 5c4e8d3781 ("usb: host: xhci-tegra: Add support for XUSB context save/restore")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20200715113842.30680-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang fails to compile __get_user_size() on 32-bit for the following code:
long long val;
__get_user(val, usrptr);
with: error: invalid output size for constraint '=q'
GCC compiles the same code without complaints.
The reason is that GCC and Clang are architecturally different, which leads
to subtle issues for code that's invalid but clearly dead, i.e. with code
that emulates polymorphism with the preprocessor and sizeof.
GCC will perform semantic analysis after early inlining and dead code
elimination, so it will not warn on invalid code that's dead. Clang
strictly performs optimizations after semantic analysis, so it will warn
for dead code.
Neither Clang nor GCC like this very much with -m32:
long long ret;
asm ("movb $5, %0" : "=q" (ret));
However, GCC can tolerate this variant:
long long ret;
switch (sizeof(ret)) {
case 1:
asm ("movb $5, %0" : "=q" (ret));
break;
case 8:;
}
Clang, on the other hand, won't accept that because it validates the inline
asm for the '1' case before the optimisation phase where it realises that
it wouldn't have to emit it anyway.
If LLVM (Clang's "back end") fails such as during instruction selection or
register allocation, it cannot provide accurate diagnostics (warnings /
errors) that contain line information, as the AST has been discarded from
memory at that point.
While there have been early discussions about having C/C++ specific
language optimizations in Clang via the use of MLIR, which would enable
such earlier optimizations, such work is not scoped and likely a multi-year
endeavor.
It was discussed to change the asm output constraint for the one byte case
from "=q" to "=r". While it works for 64-bit, it fails on 32-bit. With '=r'
the compiler could fail to chose a register accessible as high/low which is
required for the byte operation. If that happens the assembly will fail.
Use a local temporary variable of type 'unsigned char' as output for the
byte copy inline asm and then assign it to the real output variable. This
prevents Clang from failing the semantic analysis in the above case.
The resulting code for the actual one byte copy is not affected as the
temporary variable is optimized out.
[ tglx: Amended changelog ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/3
Link: https://github.com/ClangBuiltLinux/linux/issues/194
Link: https://github.com/ClangBuiltLinux/linux/issues/781
Link: https://lore.kernel.org/lkml/20180209161833.4605-1-dwmw2@infradead.org/
Link: https://lore.kernel.org/lkml/CAK8P3a1EBaWdbAEzirFDSgHVJMtWjuNt2HGG8z+vpXeNHwETFQ@mail.gmail.com/
Link: https://lkml.kernel.org/r/20200720204925.3654302-12-ndesaulniers@google.com
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
Link: https://lore.kernel.org/r/20200722022514.1283916-11-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-renesas-soc@vger.kernel.org
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
Also, bridge->busnr is never set so effectively the root bus must be 0.
This will be fixed by a subsequent commit.
Link: https://lore.kernel.org/r/20200722022514.1283916-10-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
There was also a bug that the root_busno is never set which means the
root bus number is always 0 even if the DT said something else.
Link: https://lore.kernel.org/r/20200722022514.1283916-9-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
There was also a bug that the pci_host_bridge.busnr is set from
root_busno, but root_busno is never set which means the root bus number
is always 0 even if the DT said something else.
Link: https://lore.kernel.org/r/20200722022514.1283916-8-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
Link: https://lore.kernel.org/r/20200722022514.1283916-7-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
Link: https://lore.kernel.org/r/20200722022514.1283916-6-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.
Link: https://lore.kernel.org/r/20200722022514.1283916-5-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
The struct pci_host_bridge is 0 initialized when allocated, so there's
no need to explicitly set fields to 0.
Link: https://lore.kernel.org/r/20200722022514.1283916-4-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
The host bridge's parent device is always the platform device. As we
already have a pointer to it in the devres functions, let's initialize
the parent device. Drivers can still override the parent if desired.
Link: https://lore.kernel.org/r/20200722022514.1283916-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
PCI_ENABLE_PROC_DOMAINS is only used on powerpc and doesn't do anything
for the Versatile host driver, so let's drop it. I'm not sure how or why
I had this to begin with. PCI_ENABLE_PROC_DOMAINS was never used on ARM.
Link: https://lore.kernel.org/r/20200722022514.1283916-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
devm_pci_remap_cfg_resource() will print an error message by itself when
goes wrong, so remove the duplicate error message.
Link: https://lore.kernel.org/r/20200526150954.4729-1-zhengdejin5@gmail.com
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
[1]: 3452a0d8c1
[2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Also remove now unused __percpu_mov_op.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-11-ndesaulniers@google.com
Use __pcpu_size_call_return() to simplify this_cpu_read_stable().
Also remove __bad_percpu_size() which is now unused.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-10-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-9-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-8-ndesaulniers@google.com
The core percpu macros already have a switch on the data size, so the switch
in the x86 code is redundant and produces more dead code.
Also use appropriate types for the width of the instructions. This avoids
errors when compiling with Clang.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Link: https://lkml.kernel.org/r/20200720204925.3654302-7-ndesaulniers@google.com
