Let's fallback to single pages if short on huge pages. No need to stop
memory hotplug.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-8-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's cleanup empty page tables. Consider only page tables that fully
fall into the idendity mapping and the vmemmap range.
As there are no valid accesses to vmem/vmemmap within non-populated ranges,
the single tlb flush at the end should be sufficient.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-7-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's synchronize all accesses to the 1:1 and vmemmap mappings. This will
be especially relevant when wanting to cleanup empty page tables that could
be shared by both. Avoid races when removing tables that might be just
about to get reused.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-6-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cleanup what we partially added in case vmemmap_populate() fails. For
vmem, this is already handled by vmem_add_mapping().
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-5-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors.
Different from its predecessor MSM8916, where 'calib_sel' bits sit in
separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and
spread on discrete offsets. That's why all qfprom bits are read as one
go and later mapped to calibration data for MSM8939.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */
Acked-by: Konrad Dybcio <konradybcio@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
We want to have only a single pagetable walker and reuse the same
functionality for vmemmap handling. Let's start by consolidating
vmem_add_range() and vmem_remove_range(), converting it into a
recursive implementation.
A recursive implementation makes it easier to expand individual cases
without harming readability. In addition, we minimize traversing the
whole hierarchy over and over again.
One change is that we don't unmap large PMDs/PUDs when not completely
covered by the request, something that should never happen with direct
mappings, unless one would be removing in other granularity than added,
which would be broken already.
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-3-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's match the name to vmem_remove_range().
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200722094558.9828-2-david@redhat.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This kernel feature is required for enabling BPF_KPROBE_OVERRIDE.
Define override_function_with_return() and regs_set_return_value()
functions, and fix compile errors in syscall_wrapper.h.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The existing comment was talking about reading in the write part
and vice versa. While we are here make it more clear why restricting
the syscalls to MIO capable devices is okay.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
It adds compatible for MSM8939 TSENS device.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629144926.665-2-shawn.guo@linaro.org
The return type of functions _inb, _inw and _inl are all u16 which looks
wrong. This patch makes them u8, u16 and u32 respectively.
The original commit text for these does not indicate that these should
be all forced to u16.
Fixes: f009c89df7 ("io: Provide _inX() and _outX()")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When the system is suspended, we can explicitly disable clock to save
power. To achieve this, we need save registers' state since it could be
lost after power off.
Implement power management which will:
- Turn the clock off after probing
- Disable clock and save registers' state on system suspend, as
well as enable clock and restore registers' state on resume
- Rely on the Power Domain framework to shutdown the intmux
power domain
Without CONFIG_PM, the clock is always on after probe stage.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[maz: revamped commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200727141734.24890-2-qiangqing.zhang@nxp.com
Booting the latest kernel with DEBUG_ATOMIC_SLEEP=y on a GICv4.1 enabled
box, I get the following kernel splat:
[ 0.053766] BUG: sleeping function called from invalid context at mm/slab.h:567
[ 0.053767] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1
[ 0.053769] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.8.0-rc3+ #23
[ 0.053770] Call trace:
[ 0.053774] dump_backtrace+0x0/0x218
[ 0.053775] show_stack+0x2c/0x38
[ 0.053777] dump_stack+0xc4/0x10c
[ 0.053779] ___might_sleep+0xfc/0x140
[ 0.053780] __might_sleep+0x58/0x90
[ 0.053782] slab_pre_alloc_hook+0x7c/0x90
[ 0.053783] kmem_cache_alloc_trace+0x60/0x2f0
[ 0.053785] its_cpu_init+0x6f4/0xe40
[ 0.053786] gic_starting_cpu+0x24/0x38
[ 0.053788] cpuhp_invoke_callback+0xa0/0x710
[ 0.053789] notify_cpu_starting+0xcc/0xd8
[ 0.053790] secondary_start_kernel+0x148/0x200
# ./scripts/faddr2line vmlinux its_cpu_init+0x6f4/0xe40
its_cpu_init+0x6f4/0xe40:
allocate_vpe_l1_table at drivers/irqchip/irq-gic-v3-its.c:2818
(inlined by) its_cpu_init_lpis at drivers/irqchip/irq-gic-v3-its.c:3138
(inlined by) its_cpu_init at drivers/irqchip/irq-gic-v3-its.c:5166
It turned out that we're allocating memory using GFP_KERNEL (may sleep)
within the CPU hotplug notifier, which is indeed an atomic context. Bad
thing may happen if we're playing on a system with more than a single
CommonLPIAff group. Avoid it by turning this into an atomic allocation.
Fixes: 5e5168461c ("irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200630133746.816-1-yuzenghui@huawei.com
The newly introduced IRQCHIP_PLATFORM_DRIVER_* macros expand into
module-related macros, but do so without including module.h.
Depending on the driver and/or architecture, this happens to work,
or not.
Unconditionnaly include linux/module.h to sort it out.
Fixes: f3b5e608ed6d ("irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros")
Reported-by: kernel test robot <lkp@intel.com>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
EXTI lines are mainly used to wake-up system from CStop low power mode.
Currently, if a device wants to use a EXTI (direct) line as wakeup line,
it has to declare 2 interrupts:
- one for EXTI used to wake-up system (with dedicated_wake_irq api).
- one for GIC used to get the wake up reason inside the concerned IP.
This split is not really needed as each EXTI line is actually "linked " to
a GIC. So to avoid this useless double interrupt management in each
wake-up driver, this patch lets the STM32 EXTI driver abstract it by
mapping each EXTI line to his corresponding GIC.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200717140717.29606-1-alexandre.torgue@st.com
This driver can work as a platform driver. So covert it to a platform
driver.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Hanks Chen <hanks.chen@mediatek.com>
Link: https://lore.kernel.org/r/20200718000637.3632841-5-saravanak@google.com
This driver can work as a platform driver. So covert it to a platform
driver.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Hanks Chen <hanks.chen@mediatek.com>
Link: https://lore.kernel.org/r/20200718000637.3632841-4-saravanak@google.com
Switch the driver to use the helper macros. In addition to reducing the
number of lines, this also adds module unload protection (if the driver
is compiled as a module) by switching from module_platform_driver to
builtin_platform_driver.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200718000637.3632841-3-saravanak@google.com
Compiling an irqchip driver as a platform driver needs to bunch of
things to be done right:
- Making sure the parent domain is initialized first
- Making sure the device can't be unbound from sysfs
- Disallowing module unload if it's built as a module
- Finding the parent node
- Etc.
Instead of trying to make sure all future irqchip platform drivers get
this right, provide boilerplate macros that take care of all of this.
An example use would look something like this. Where acme_foo_init and
acme_bar_init are similar to what would be passed to IRQCHIP_DECLARE.
IRQCHIP_PLATFORM_DRIVER_BEGIN(acme_irq)
IRQCHIP_MATCH("acme,foo", acme_foo_init)
IRQCHIP_MATCH("acme,bar", acme_bar_init)
IRQCHIP_PLATFORM_DRIVER_END(acme_irq)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200718000637.3632841-2-saravanak@google.com
Drop the repeated word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200719002853.20419-1-rdunlap@infradead.org
The GICv4.1 spec tells us that it's CONSTRAINED UNPREDICTABLE to issue a
register-based invalidation operation for a vPEID not mapped to that RD,
or another RD within the same CommonLPIAff group.
To follow this rule, commit f3a059219b ("irqchip/gic-v4.1: Ensure mutual
exclusion between vPE affinity change and RD access") tried to address the
race between the RD accesses and the vPE affinity change, but somehow
forgot to take GICR_INVALLR into account. Let's take the vpe_lock before
evaluating vpe->col_idx to fix it.
Fixes: f3a059219b ("irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change and RD access")
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200720092328.708-1-yuzenghui@huawei.com
cpu_logical_map is only defined for CONFIG_SMP builds, when we are in an
UP configuration, the boot CPU is 0.
Fixes: 6468fc18b0 ("irqchip/irq-bcm7038-l1: Add PM support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200724184157.29150-1-f.fainelli@gmail.com
[maz: The GICv3 spec has evolved quite a bit since the draft the Linux
driver was written against, and some register definitions are simply gone]
As per the GICv3 specification, GIC{D,R}_SEIR are not assigned and the
locations (0x0068) are actually Reserved. GICR_MOV{LPI,ALL}R are two IMP
DEF registers and might be defined by some specific micro-architecture.
As they're not used anywhere in the kernel, just drop all of them.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: added context explaination]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200630134126.880-1-yuzenghui@huawei.com
Allows qcom-pdc driver to be loaded as a permanent module
Also, due to the fact that IRQCHIP_DECLARE becomes a no-op when
building as a module, we have to replace it with platform driver
hooks explicitly.
Thanks to Saravana for his help on pointing out the
IRQCHIP_DECLARE issue and guidance on a solution.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20200710231824.60699-4-john.stultz@linaro.org
Add EXPORT_SYMBOL_GPL entries for irq_chip_retrigger_hierarchy()
and irq_chip_set_vcpu_affinity_parent() so that we can allow
drivers like the qcom-pdc driver to be loadable as a module.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20200710231824.60699-3-john.stultz@linaro.org
Add export for irq_domain_update_bus_token() so that
we can allow drivers like the qcom-pdc driver to be
loadable as a module.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-gpio@vger.kernel.org
Link: https://lore.kernel.org/r/20200710231824.60699-2-john.stultz@linaro.org
The sparse tool complains as follows:
drivers/irqchip/irq-mips-gic.c:49:1: warning:
symbol '__pcpu_scope_pcpu_masks' was not declared. Should it be static?
drivers/irqchip/irq-mips-gic.c:620:6: warning:
symbol 'gic_ipi_domain_free' was not declared. Should it be static?
drivers/irqchip/irq-mips-gic.c:634:5: warning:
symbol 'gic_ipi_domain_match' was not declared. Should it be static?
Those symbols are not used outside of irq-mips-gic.c, so marks
them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200714142245.16124-1-weiyongjun1@huawei.com
The is_fwnode_irqchip() helper will check if the fwnode_handle is empty.
There is no need to perform a redundant check outside of it.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200716083905.287-1-yuzenghui@huawei.com
Now that the hwspin_lock_timeout_in_atomic() API is available use it.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200706081115.25180-1-alexandre.torgue@st.com
skiroot_defconfig fails:
arch/powerpc/kernel/fadump.c:48:17: error: ‘cpus_in_fadump’ defined but not used
48 | static atomic_t cpus_in_fadump;
Fix it by moving the definition into the #ifdef where it's used.
Fixes: ba608c4fa1 ("powerpc/fadump: fix race between pstore write and fadump crash trigger")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727070341.595634-1-mpe@ellerman.id.au
Commit 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the
caller") removed the local_irq_disable from hash_preload, but it was
required for more than just the page table walk: the hash pte busy bit is
effectively a lock which may be taken in interrupt context, and the local
update flag test must not be preempted before it's used.
This solves apparent lockups with perf interrupting __hash_page_64K. If
get_perf_callchain then also takes a hash fault on the same page while it
is already locked, it will loop forever taking hash faults, which looks like
this:
cpu 0x49e: Vector: 100 (System Reset) at [c00000001a4f7d70]
pc: c000000000072dc8: hash_page_mm+0x8/0x800
lr: c00000000000c5a4: do_hash_page+0x24/0x38
sp: c0002ac1cc69ac70
msr: 8000000000081033
current = 0xc0002ac1cc602e00
paca = 0xc00000001de1f280 irqmask: 0x03 irq_happened: 0x01
pid = 20118, comm = pread2_processe
Linux version 5.8.0-rc6-00345-g1fad14f18bc6
49e:mon> t
[c0002ac1cc69ac70] c00000000000c5a4 do_hash_page+0x24/0x38 (unreliable)
--- Exception: 300 (Data Access) at c00000000008fa60 __copy_tofrom_user_power7+0x20c/0x7ac
[link register ] c000000000335d10 copy_from_user_nofault+0xf0/0x150
[c0002ac1cc69af70] c00032bf9fa3c880 (unreliable)
[c0002ac1cc69afa0] c000000000109df0 read_user_stack_64+0x70/0xf0
[c0002ac1cc69afd0] c000000000109fcc perf_callchain_user_64+0x15c/0x410
[c0002ac1cc69b060] c000000000109c00 perf_callchain_user+0x20/0x40
[c0002ac1cc69b080] c00000000031c6cc get_perf_callchain+0x25c/0x360
[c0002ac1cc69b120] c000000000316b50 perf_callchain+0x70/0xa0
[c0002ac1cc69b140] c000000000316ddc perf_prepare_sample+0x25c/0x790
[c0002ac1cc69b1a0] c000000000317350 perf_event_output_forward+0x40/0xb0
[c0002ac1cc69b220] c000000000306138 __perf_event_overflow+0x88/0x1a0
[c0002ac1cc69b270] c00000000010cf70 record_and_restart+0x230/0x750
[c0002ac1cc69b620] c00000000010d69c perf_event_interrupt+0x20c/0x510
[c0002ac1cc69b730] c000000000027d9c performance_monitor_exception+0x4c/0x60
[c0002ac1cc69b750] c00000000000b2f8 performance_monitor_common_virt+0x1b8/0x1c0
--- Exception: f00 (Performance Monitor) at c0000000000cb5b0 pSeries_lpar_hpte_insert+0x0/0x160
[link register ] c0000000000846f0 __hash_page_64K+0x210/0x540
[c0002ac1cc69ba50] 0000000000000000 (unreliable)
[c0002ac1cc69bb00] c000000000073ae0 update_mmu_cache+0x390/0x3a0
[c0002ac1cc69bb70] c00000000037f024 wp_page_copy+0x364/0xce0
[c0002ac1cc69bc20] c00000000038272c do_wp_page+0xdc/0xa60
[c0002ac1cc69bc70] c0000000003857bc handle_mm_fault+0xb9c/0x1b60
[c0002ac1cc69bd50] c00000000006c434 __do_page_fault+0x314/0xc90
[c0002ac1cc69be20] c00000000000c5c8 handle_page_fault+0x10/0x2c
--- Exception: 300 (Data Access) at 00007fff8c861fe8
SP (7ffff6b19660) is in userspace
Fixes: 2f92447f9f ("powerpc/book3s64/hash: Use the pte_t address from the caller")
Reported-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reported-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200727060947.10060-1-npiggin@gmail.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mention why we open-code strsep, so it is clear that it is intentional.
Fixes: 736bb11898 ("modpost: remove use of non-standard strsep() in HOSTCC code")
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use the asm-generic version of the cmpxchg_local() macro. Although not
all target types use asm-generic/cmpxchg.h, for those that do the
local cmpxchg_local() is the same as the asm-generic/cmpxchg.h one.
So no need to define the local one.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The comment about steal_context() came from powerpc and a part of it
addresses differences between powerpc variants that are not really
relevant to m68k.
Remove that part of the comment.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The Cache Control Register (CACR) of the ColdFire V3 has bits that
control high level caching functions, and also enable/disable the use
of the alternate stack pointer register (the EUSP bit) to provide
separate supervisor and user stack pointer registers. The code as
it is today will blindly clear the EUSP bit on cache actions like
invalidation. So it is broken for this case - and that will result
in failed booting (interrupt entry and exit processing will be
completely hosed).
This only affects ColdFire V3 parts that support the alternate stack
register (like the 5329 for example) - generally speaking new parts do,
older parts don't. It has no impact on ColdFire V3 parts with the single
stack pointer, like the 5307 for example.
Fix the cache bit defines used, so they maintain the EUSP bit when
carrying out cache actions through the CACR register.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Compiling for MMU enabled ColdFire targets gives a warning:
CC arch/m68k/mm/mcfmmu.o
arch/m68k/mm/mcfmmu.c: In function ‘paging_init’:
arch/m68k/mm/mcfmmu.c:42:17: warning: unused variable ‘zone’ [-Wunused-variable]
enum zone_type zone;
^~~~
This was caused by changes in commit fa3354e4ea ("mm: free_area_init:
use maximal zone PFNs rather than zone sizes") leaving around a now
unused variable declaration. Remove the unused variable.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Due to the different data endian requirements of different buses on
m68knommu variants we sometimes need to byte swap results for readX()
or values to writeX(). Currently the code uses cpu_to_le to do this,
resulting in sparse warnings like:
arch/m68k/include/asm/io_no.h:78:16: sparse: sparse: cast to restricted __le32
Some casting to force __le32 types would resolve but it looks to be
simpler to just switch to using the underlying swab32() to resolve.
Similarly handle the 16bit cases in these functions as well.
Reported-by: kernel test robot <lkp@intel.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Bring the m68knommu raw IO functions into line with the m68k raw IO
access functions and __force casting of the address component. This
is primarily to fix sparse warnings on use of these raw macros.
Reported-by: kernel test robot <lkp@intel.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Some defconfig updates for stmark2 board, mainly to enable
sdcard and mmu.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
- Conversion of all push buffer emission to a new set of macros, with
better safety, sanity-checking, debug ability, and the use of NVIDIA's
class headers. The headers have been trimmed to just what we use as
they're rather extensive, the full versions can be found on NVIDIA's
github[1].
- Proper push buffer space management for EVO/NVD channels.
- Fixes to firmware loading behaviour in odd situations (various
combinations of missing/incompatible FW).
- runpm reference leak fixes
- crc compile fixes without debugfs
- 2MiB system memory pages support on Pascal and newer
- misc other cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv6XYgiXDK6TpvsjMo+8AkrMw7ZxmA=vKk6Gd-xuv6txBA@mail.gmail.com
A couple of fixes for issues relating to format modifiers (there's
still a patch pending from James Jones to hopefully address the
remaining ones), regression fix from the recent HDA nightmare, and a
race fix for Turing modesetting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5aAp+FZMZGTB+Nszc==h5gEbdNV58sSRRQDF1R5qQRGg@mail.gmail.com
GPIO_REGMAP_ADDR_ZERO() cast to unsigned long but the actual config
parameters are unsigned int. We use unsigned int here because that is
the type which is used by the underlying regmap.
Fixes: ebe363197e ("gpio: add a reusable generic gpio_chip using regmap")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20200725232337.27581-1-michael@walle.cc
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Drop the doubled word "for".
Change "It it" to "If it".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-pm@vger.kernel.org
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
