Introduce qca8k_bulk_read/write() function to use mgmt Ethernet way to
read/write packet in bulk. Make use of this new function in the fdb
function and while at it reduce the reg for fdb_read from 4 to 3 as the
max bit for the ARL(fdb) table is 83 bits.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mgmt Ethernet packet can read/write up to 16byte at times. The len reg
is limited to 15 (0xf). The switch actually sends and accepts data in 4
different steps of len values.
Len steps:
- 0: nothing
- 1-4: first 4 byte
- 5-6: first 12 byte
- 7-15: all 16 byte
In the alloc skb function we check if the len is 16 and we fix it to a
len of 15. It the read/write function interest to extract the real asked
data. The tagger handler will always copy the fully 16byte with a READ
command. This is useful for some big regs like the fdb reg that are
more than 4byte of data. This permits to introduce a bulk function that
will send and request the entire entry in one go.
Write function is changed and it does now require to pass the pointer to
val to also handle array val.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From Documentation, we can cache lo and hi the same way we do with the
page. This massively reduce the mdio write as 3/4 of the time as we only
require to write the lo or hi part for a mdio write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There can be multiple qca8k switch on the same system. Move the static
qca8k_current_page to qca8k_priv and make it specific for each switch.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use mgmt Ethernet also for phy read/write if availabale. Use a different
seq number to make sure we receive the correct packet.
On any error, we fallback to the legacy mdio read/write.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The switch can autocast MIB counter using Ethernet packet.
Add support for this and provide a handler for the tagger.
The switch will send packet with MIB counter for each port, the switch
will use completion API to wait for the correct packet to be received
and will complete the task only when each packet is received.
Although the handler will drop all the other packet, we still have to
consume each MIB packet to complete the request. This is done to prevent
mixed data with concurrent ethtool request.
connect_tag_protocol() is used to add the handler to the tag_qca tagger,
master_state_change() use the MIB lock to make sure no MIB Ethernet is
in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add qca8k side support for mgmt read/write in Ethernet packet.
qca8k supports some specially crafted Ethernet packet that can be used
for mgmt read/write instead of the legacy method uart/internal mdio.
This add support for the qca8k side to craft the packet and enqueue it.
Each port and the qca8k_priv have a special struct to put data in it.
The completion API is used to wait for the packet to be received back
with the requested data.
The various steps are:
1. Craft the special packet with the qca hdr set to mgmt read/write
mode.
2. Set the lock in the dedicated mgmt struct.
3. Increment the seq number and set it in the mgmt pkt
4. Reinit the completion.
5. Enqueue the packet.
6. Wait the packet to be received.
7. Use the data set by the tagger to complete the mdio operation.
If the completion timeouts or the ack value is not true, the legacy
mdio way is used.
It has to be considered that in the initial setup mdio is still used and
mdio is still used until DSA is ready to accept and tag packet.
tag_proto_connect() is used to fill the required handler for the tagger
to correctly parse and elaborate the special Ethernet mdio packet.
Locking is added to qca8k_master_change() to make sure no mgmt Ethernet
are in progress.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MDIO/MIB Ethernet require the master port and the tagger availabale to
correctly work. Use the new api master_state_change to track when master
is operational or not and set a bool in qca8k_priv.
We cache the first cached master available and we check if other cpu
port are operational when the cached one goes down.
This cached master will later be used by mdio read/write and mib request to
correctly use the working function.
qca8k implementation for MDIO/MIB Ethernet is bad. CPU port0 is the only
one that answers with the ack packet or sends MIB Ethernet packets. For
this reason the master_state_change ignore CPU port6 and only checks
CPU port0 if it's operational and enables this mode.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add connect/disconnect helper to assign private struct to the DSA switch.
Add support for Ethernet mgmt and MIB if the DSA driver provide an handler
to correctly parse and elaborate the data.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add struct to correctly parse a mib Ethernet packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add all the required define to prepare support for mgmt read/write in
Ethernet packet. Any packet of this type has to be dropped as the only
use of these special packet is receive ack for an mgmt write request or
receive data for an mgmt read request.
A struct is used that emulates the Ethernet header but is used for a
different purpose.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethernet MDIO packets are non-standard and DSA master expects the first
6 octets to be the MAC DA. To address these kind of packet, enable
promisc_on_master flag for the tagger.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move tag_qca define to include dir linux/dsa as the qca8k require access
to the tagger define to support in-band mdio read/write using ethernet
packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert driver to FIELD macro to drop redundant define.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order for switch driver to be able to make simple and reliable use of
the master tracking operations, they must also be notified of the
initial state of the DSA master, not just of the changes. This is
because they might enable certain features only during the time when
they know that the DSA master is up and running.
Therefore, this change explicitly checks the state of the DSA master
under the same rtnl_mutex as we were holding during the
dsa_master_setup() and dsa_master_teardown() call. The idea being that
if the DSA master became operational in between the moment in which it
became a DSA master (dsa_master_setup set dev->dsa_ptr) and the moment
when we checked for the master being up, there is a chance that we
would emit a ->master_state_change() call with no actual state change.
We need to avoid that by serializing the concurrent netdevice event with
us. If the netdevice event started before, we force it to finish before
we begin, because we take rtnl_lock before making netdev_uses_dsa()
return true. So we also handle that early event and do nothing on it.
Similarly, if the dev_open() attempt is concurrent with us, it will
attempt to take the rtnl_mutex, but we're holding it. We'll see that
the master flag IFF_UP isn't set, then when we release the rtnl_mutex
we'll process the NETDEV_UP notifier.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Certain drivers may need to send management traffic to the switch for
things like register access, FDB dump, etc, to accelerate what their
slow bus (SPI, I2C, MDIO) can already do.
Ethernet is faster (especially in bulk transactions) but is also more
unreliable, since the user may decide to bring the DSA master down (or
not bring it up), therefore severing the link between the host and the
attached switch.
Drivers needing Ethernet-based register access already should have
fallback logic to the slow bus if the Ethernet method fails, but that
fallback may be based on a timeout, and the I/O to the switch may slow
down to a halt if the master is down, because every Ethernet packet will
have to time out. The driver also doesn't have the option to turn off
Ethernet-based I/O momentarily, because it wouldn't know when to turn it
back on.
Which is where this change comes in. By tracking NETDEV_CHANGE,
NETDEV_UP and NETDEV_GOING_DOWN events on the DSA master, we should know
the exact interval of time during which this interface is reliably
available for traffic. Provide this information to switches so they can
use it as they wish.
An helper is added dsa_port_master_is_operational() to check if a master
port is operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmH6D8AACgkQSD+KveBX
+j6E2ggA0cntPZ4neBnDk/fg09qVW74/1VUc3Yh9lRGTnOLYUubbeAuU3WKvUTo/
CngDVS8qNJ7bTf5PTXF4+UlpZSok0yVD4ReMgNHln5mnEONvAuiRQdno1amIQ/AN
6OKk9cy+Mn/ua8XFu75iTCJ9YJuR4HsZowE+/rTHaWGU/cFNMyzSFcQwtnz4aS9G
3sDTowblDtinvSLRN/RS5IyhEfPB4zII4HZEtvM/obobYk40FxkwZ4qWw1VY5ush
PZYuqDyXF12rKUvJI1GGKO8mWgyUrmori/VjBPt18uaSK5Om0V6pWNTHjvw3UTrz
Q3ypiQS+VPdFB0bhkqfaIxfnG4G6iw==
=FwNK
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
This reverts commit 39aead8373.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
This reverts commit b3ec8cdf45.
Revert the second (of 2) commits which disabled scrolling acceleration
in fbcon/fbdev. It introduced a regression for fbdev-supported graphic
cards because of the performance penalty by doing screen scrolling by
software instead of using the existing graphic card 2D hardware
acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
ALS illuminance value present only in first 15 bits from SFH firmware
for V2 platforms. Hence added a mask of 15 bit to limit ALS max
illuminance values to get correct illuminance value.
Fixes: 0aad9c95eb ("HID: amd_sfh: Extend ALS support for newer AMD platform")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
HPD sensors take more time to initialize. Hence increasing sensor
command timeout to get response with status within a max timeout.
Fixes: 173709f50e ("HID: amd_sfh: Add command response to check command status")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
I'm was on the receiving end of a lockdep splat from this driver and after
scratching my head I couldn't be entirely sure it was a false positive
given we would also have to think about whether the regulator locking is
safe (since the notifier is called whilst holding regulator locks which
are also needed for regulator_is_enabled() ).
Regardless of whether it is a real bug or not, the mutex isn't needed.
We can use reference counting tricks instead to avoid races with the
notifier calls.
The observed splat follows:
------------------------------------------------------
kworker/u16:3/127 is trying to acquire lock:
ffff00008021fb20 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}, at: ihid_goodix_vdd_notify+0x30/0x94
but task is already holding lock:
ffff0000835c60c0 (&(&rdev->notifier)->rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x30/0x70
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&(&rdev->notifier)->rwsem){++++}-{4:4}:
down_write+0x68/0x8c
blocking_notifier_chain_register+0x54/0x70
regulator_register_notifier+0x1c/0x24
devm_regulator_register_notifier+0x58/0x98
i2c_hid_of_goodix_probe+0xdc/0x158
i2c_device_probe+0x25d/0x270
really_probe+0x174/0x2cc
__driver_probe_device+0xc0/0xd8
driver_probe_device+0x50/0xe4
__device_attach_driver+0xa8/0xc0
bus_for_each_drv+0x9c/0xc0
__device_attach_async_helper+0x6c/0xbc
async_run_entry_fn+0x38/0x100
process_one_work+0x294/0x438
worker_thread+0x180/0x258
kthread+0x120/0x130
ret_from_fork+0x10/0x20
-> #0 (&ihid_goodix->regulator_mutex){+.+.}-{4:4}:
__lock_acquire+0xd24/0xfe8
lock_acquire+0x288/0x2f4
__mutex_lock+0xa0/0x338
mutex_lock_nested+0x3c/0x5c
ihid_goodix_vdd_notify+0x30/0x94
notifier_call_chain+0x6c/0x8c
blocking_notifier_call_chain+0x48/0x70
_notifier_call_chain.isra.0+0x18/0x20
_regulator_enable+0xc0/0x178
regulator_enable+0x40/0x7c
goodix_i2c_hid_power_up+0x18/0x20
i2c_hid_core_power_up.isra.0+0x1c/0x2c
i2c_hid_core_probe+0xd8/0x3d4
i2c_hid_of_goodix_probe+0x14c/0x158
i2c_device_probe+0x25c/0x270
really_probe+0x174/0x2cc
__driver_probe_device+0xc0/0xd8
driver_probe_device+0x50/0xe4
__device_attach_driver+0xa8/0xc0
bus_for_each_drv+0x9c/0xc0
__device_attach_async_helper+0x6c/0xbc
async_run_entry_fn+0x38/0x100
process_one_work+0x294/0x438
worker_thread+0x180/0x258
kthread+0x120/0x130
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&rdev->notifier)->rwsem);
lock(&ihid_goodix->regulator_mutex);
lock(&(&rdev->notifier)->rwsem);
lock(&ihid_goodix->regulator_mutex);
*** DEADLOCK ***
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Fixes: 18eeef46d3 ("HID: i2c-hid: goodix: Tie the reset line to true state of the regulator")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SBI implementation version returned by KVM RISC-V should be the
Host Linux version code.
Fixes: c62a768597 ("RISC-V: KVM: Add SBI v0.2 base extension")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Those applications that run in VU mode and access the time CSR cause
a virtual instruction trap as Guest kernel currently does not
initialize the scounteren CSR.
To fix this, we should make CY, TM, and IR counters accessibile
by default in VU mode (similar to OpenSBI).
Fixes: a33c72faf2 ("RISC-V: KVM: Implement VCPU create, init and
destroy functions")
Cc: stable@vger.kernel.org
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state
(EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting
the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU
in this case, we may run the core IRQ code and IRQ handler without RCU
watching, leading to various potential problems.
Additionally, we do not inform lockdep or tracing that interrupts will
be enabled during guest execution, which caan lead to misleading traces
and warnings that interrupts have been enabled for overly-long periods.
This patch fixes these issues by using the new timing and context
entry/exit helpers to ensure that interrupts are handled during guest
vtime but with RCU watching, with a sequence:
guest_timing_enter_irqoff();
guest_state_enter_irqoff();
< run the vcpu >
guest_state_exit_irqoff();
< take any pending IRQs >
guest_timing_exit_irqoff();
Since instrumentation may make use of RCU, we must also ensure that no
instrumented code is run during the EQS. I've split out the critical
section into a new kvm_riscv_enter_exit_vcpu() helper which is marked
noinstr.
Fixes: 99cdc6c18c ("RISC-V: Add initial skeletal KVM support")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a check for !buf->single before calling pt_buffer_region_size in a
place where a missing check can cause a kernel crash.
Fixes a bug introduced by commit 670638477a ("perf/x86/intel/pt:
Opportunistically use single range output mode"), which added a
support for PT single-range output mode. Since that commit if a PT
stop filter range is hit while tracing, the kernel will crash because
of a null pointer dereference in pt_handle_status due to calling
pt_buffer_region_size without a ToPA configured.
The commit which introduced single-range mode guarded almost all uses of
the ToPA buffer variables with checks of the buf->single variable, but
missed the case where tracing was stopped by the PT hardware, which
happens when execution hits a configured stop filter.
Tested that hitting a stop filter while PT recording successfully
records a trace with this patch but crashes without this patch.
Fixes: 670638477a ("perf/x86/intel/pt: Opportunistically use single range output mode")
Signed-off-by: Tristan Hume <tristan@thume.ca>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220127220806.73664-1-tristan@thume.ca
Due to the alignment requirements of siginfo_t, as described in
3ddb3fd8cd ("signal, perf: Fix siginfo_t by avoiding u64 on 32-bit
architectures"), siginfo_t::si_perf_data is limited to an unsigned long.
However, perf_event_attr::sig_data is an u64, to avoid having to deal
with compat conversions. Due to being an u64, it may not immediately be
clear to users that sig_data is truncated on 32 bit architectures.
Add a comment to explicitly point this out, and hopefully help some
users save time by not having to deduce themselves what's happening.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-3-elver@google.com
Test that PERF_EVENT_IOC_MODIFY_ATTRIBUTES correctly modifies
perf_event_attr::sig_data as well.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-2-elver@google.com
The intent has always been that perf_event_attr::sig_data should also be
modifiable along with PERF_EVENT_IOC_MODIFY_ATTRIBUTES, because it is
observable by user space if SIGTRAP on events is requested.
Currently only PERF_TYPE_BREAKPOINT is modifiable, and explicitly copies
relevant breakpoint-related attributes in hw_breakpoint_copy_attr().
This misses copying perf_event_attr::sig_data.
Since sig_data is not specific to PERF_TYPE_BREAKPOINT, introduce a
helper to copy generic event-type-independent attributes on
modification.
Fixes: 97ba62b278 ("perf: Add support for SIGTRAP on perf events")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Link: https://lore.kernel.org/r/20220131103407.1971678-1-elver@google.com
Kyle reported that rr[0] has started to malfunction on Comet Lake and
later CPUs due to EFI starting to make use of CPL3 [1] and the PMU
event filtering not distinguishing between regular CPL3 and SMM CPL3.
Since this is a privilege violation, default disable SMM visibility
where possible.
Administrators wanting to observe SMM cycles can easily change this
using the sysfs attribute while regular users don't have access to
this file.
[0] https://rr-project.org/
[1] See the Intel white paper "Trustworthy SMM on the Intel vPro Platform"
at https://bugzilla.kernel.org/attachment.cgi?id=300300, particularly the
end of page 5.
Reported-by: Kyle Huey <me@kylehuey.com>
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/YfKChjX61OW4CkYm@hirez.programming.kicks-ass.net
If the parent GPIO controller is a sleeping controller (e.g. a GPIO
controller connected to I2C), getting or setting a GPIO triggers a
might_sleep() warning. This happens because the GPIO Aggregator takes
the can_sleep flag into account only for its internal locking, not for
calling into the parent GPIO controller.
Fix this by using the gpiod_[gs]et*_cansleep() APIs when calling into a
sleeping GPIO controller.
Reported-by: Mikko Salomäki <ms@datarespons.se>
Fixes: 828546e242 ("gpio: Add GPIO Aggregator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The thead,c900-plic has been used in opensbi to distinguish
PLIC [1]. Although PLICs have the same behaviors in Linux,
they are different hardware with some custom initializing in
firmware(opensbi).
Qute opensbi patch commit-msg by Samuel:
The T-HEAD PLIC implementation requires setting a delegation bit
to allow access from S-mode. Now that the T-HEAD PLIC has its own
compatible string, set this bit automatically from the PLIC driver,
instead of reaching into the PLIC's MMIO space from another driver.
[1]: 78c2b19218
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org
Add the compatible string "thead,c900-plic" to the riscv plic
bindings to support allwinner d1 SOC which contains c906 core.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Samuel Holland <samuel@sholland.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220130135634.1213301-2-guoren@kernel.org
We have some systems out there that have both LPI support and an
ITS, but that don't expose the ITS in their firmware tables
(either because it is broken or because they run under a hypervisor
that hides it...).
Is such a configuration, we still register the HP notifier to free
the allocated tables if needed, resulting in a warning as there is
no memory to free (nothing was allocated the first place).
Fix it by keying the HP notifier on the presence of at least one
sucessfully probed ITS.
Fixes: d23bc2bc1d ("irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve")
Reported-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20220202103454.2480465-1-maz@kernel.org
Nathan Chancellor says:
====================
This series allows CONFIG_DEBUG_INFO_DWARF5 to be selected with
CONFIG_DEBUG_INFO_BTF=y by checking the pahole version.
The first four patches add CONFIG_PAHOLE_VERSION and
scripts/pahole-version.sh to clean up all the places that pahole's
version is transformed into a 3-digit form.
The fourth patch adds a PAHOLE_VERSION dependency to DEBUG_INFO_DWARF5
so that there are no build errors when it is selected with
DEBUG_INFO_BTF.
I build tested Fedora's aarch64 and x86_64 config with ToT clang 14.0.0
and GCC 11 with CONFIG_DEBUG_INFO_DWARF5 enabled with both pahole 1.21
and 1.23.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that CONFIG_PAHOLE_VERSION exists, use it in the definition of
CONFIG_PAHOLE_HAS_SPLIT_BTF and CONFIG_PAHOLE_HAS_BTF_TAG to reduce the
amount of duplication across the tree.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-5-nathan@kernel.org
Use pahole-version.sh to get pahole's version code to reduce the amount
of duplication across the tree.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-4-nathan@kernel.org
There are a few different places where pahole's version is turned into a
three digit form with the exact same command. Move this command into
scripts/pahole-version.sh to reduce the amount of duplication across the
tree.
Create CONFIG_PAHOLE_VERSION so the version code can be used in Kconfig
to enable and disable configuration options based on the pahole version,
which is already done in a couple of places.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-3-nathan@kernel.org
Currently, scripts/pahole-flags.sh has no formal maintainer. Add it to
the BPF section so that patches to it can be properly reviewed and
picked up.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-2-nathan@kernel.org
Refuse SIDA memops on guests which are not protected.
For normal guests, the secure instruction data address designation,
which determines the location we access, is not under control of KVM.
Fixes: 19e1227768 (KVM: S390: protvirt: Introduce instruction data area bounce buffer)
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.
The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free
In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.
This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)
So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-01
This series contains updates to e1000e driver only.
Sasha removes CSME handshake with TGL platform as this is not supported
and is causing hardware unit hangs to be reported.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Handshake with CSME starts from ADL platforms
e1000e: Separate ADP board type from TGP
====================
Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The D-PHY specification (v1.2) explicitly mentions that the T-CLK-PRE
parameter's unit is Unit Interval(UI) and the minimum value is 8. Also,
kernel doc of the 'clk_pre' member of struct phy_configure_opts_mipi_dphy
mentions that it should be in UI. However, the dphy core driver wrongly
sets 'clk_pre' to 8000, which seems to hint that it's in picoseconds.
So, let's fix the dphy core driver to correctly reflect the T-CLK-PRE
parameter's minimum value according to the D-PHY specification.
I'm assuming that all impacted custom drivers shall program values in
TxByteClkHS cycles into hardware for the T-CLK-PRE parameter. The D-PHY
specification mentions that the frequency of TxByteClkHS is exactly 1/8
the High-Speed(HS) bit rate(each HS bit consumes one UI). So, relevant
custom driver code is changed to program those values as
DIV_ROUND_UP(cfg->clk_pre, BITS_PER_BYTE), then.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: 2ed869990e ("phy: Add MIPI D-PHY configuration options")
Tested-by: Liu Ying <victor.liu@nxp.com> # RM67191 DSI panel on i.MX8mq EVK
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Neil Armstrong <narmstrong@baylibre.com> # for phy-meson-axg-mipi-dphy.c
Tested-by: Guido Günther <agx@sigxcpu.org> # Librem 5 (imx8mq) with it's rather picky panel
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220124024007.1465018-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.
"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.
Fixes: 34802a42b3 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently the driver adds implicit modify hdr action for
decap rules on tunnel devices if the port is an ovs port.
This is also done if the action is drop and makes the modify
hdr redundant and also the FW doesn't support it and will generate
a syndrome.
kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3)
Fix it by adding the implicit modify hdr only for fwd actions.
Fixes: b16eb3c81f ("net/mlx5: Support internal port as decap route device")
Fixes: 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
