This will be used by BPF jit compiler to dump JITed binary to a RX huge
page, and thus allow multiple BPF programs sharing the a huge (2MB) page.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-6-song@kernel.org
Using prog->jited_len is simpler and more accurate than current
estimation (header + header->size).
Also, fix missing prog->jited_len with multi function program. This hasn't
been a real issue before this.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-5-song@kernel.org
This enables module_alloc() to allocate huge page for 2MB+ requests.
To check the difference of this change, we need enable config
CONFIG_PTDUMP_DEBUGFS, and call module_alloc(2MB). Before the change,
/sys/kernel/debug/page_tables/kernel shows pte for this map. With the
change, /sys/kernel/debug/page_tables/ show pmd for thie map.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-2-song@kernel.org
-----BEGIN PGP SIGNATURE-----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=CJKx
-----END PGP SIGNATURE-----
Merge tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- NTLMSSP authentication improvement
- RDMA (smbdirect) fix allowing broader set of NICs to be supported
- improved buffer validation
- additional small fixes, including a posix extensions fix for stable
* tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for key exchange
ksmbd: reduce smb direct max read/write size
ksmbd: don't align last entry offset in smb2 query directory
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: smbd: validate buffer descriptor structures
ksmbd: fix SMB 3.11 posix extension mount failure
On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just
clears the struct xdp_rxq_info content.
Instead, change this to unregister if we're already registered. Align
code to the igc code.
Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mauricio Vásquez <mauricio@kinvolk.io> says:
====================
This series fixes a bad calculation of strict mode in two places. It
also updates libbpf to make it easier for the users to disable a
specific LIBBPF_STRICT_* flag.
v1 -> v2:
- remove check in libbpf_set_strict_mode()
- split in different commits
v1: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-4-mauricio@kinvolk.io
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-3-mauricio@kinvolk.io
libbpf_set_strict_mode() checks that the passed mode doesn't contain
extra bits for LIBBPF_STRICT_* flags that don't exist yet.
It makes it difficult for applications to disable some strict flags as
something like "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS"
is rejected by this check and they have to use a rather complicated
formula to calculate it.[0]
One possibility is to change LIBBPF_STRICT_ALL to only contain the bits
of all existing LIBBPF_STRICT_* flags instead of 0xffffffff. However
it's not possible because the idea is that applications compiled against
older libbpf_legacy.h would still be opting into latest
LIBBPF_STRICT_ALL features.[1]
The other possibility is to remove that check so something like
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" is allowed. It's
what this commit does.
[0]: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
[1]: https://lore.kernel.org/bpf/CAEf4BzaTWa9fELJLh+bxnOb0P1EMQmaRbJVG0L+nXZdy0b8G3Q@mail.gmail.com/
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-2-mauricio@kinvolk.io
A single patch in this pull request, from me, to fix a bug that is
causing boot issues in the field (reports of problems with Fedora 35).
The bug affects mostly old-ish drives that have issues with read log
page command handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYgEmtQAKCRDdoc3SxdoY
dqucAP9P62XgGInmlT+8r4jWMoHQUjl7+s39eK9g1T8YG8R15AD/c3PUCFwZQpLx
ndEGuH1qzHIMy2682ziFHUZ4qHBBlQA=
=oV7s
-----END PGP SIGNATURE-----
Merge tag 'ata-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single patch from me, to fix a bug that is causing boot issues in
the field (reports of problems with Fedora 35).
The bug affects mostly old-ish drives that have issues with read log
page command handling"
* tag 'ata-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: Fix ata_dev_config_cpr()
After commit e3728b50cd ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 4a9af6cac0 ("ACPI: EC: Rework flushing of EC work while
suspended to idle") made acpi_ec_dispatch_gpe() check
pm_wakeup_pending(), but that is before canceling the SCI wakeup,
so pm_wakeup_pending() is always true. This causes the loop in
acpi_ec_dispatch_gpe() to always terminate after one iteration which
may not be correct.
Address this issue by canceling the SCI wakeup earlier, from
acpi_ec_dispatch_gpe() itself.
Fixes: 4a9af6cac0 ("ACPI: EC: Rework flushing of EC work while suspended to idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Testing on various upcoming OEM systems shows commit 7b167c4cb4 ("ACPI:
PM: Only mark EC GPE for wakeup on Intel systems") was short
sighted and the symptoms were indicative of other problems. Some OEMs
do have the dedicated GPIOs for the power button but also rely upon
an interrupt to the EC SCI to let the lid work.
The original commit showed spurious activity on Lenovo systems:
* On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and
sometimes the power button event doesn't work.
This was confirmed on my end at that time.
However further development in the kernel showed that the issue was
actually the IRQ for the GPIO controller was also shared with the EC SCI.
This was actually fixed by commit 2d54067fcd ("pinctrl: amd: Fix
wakeups when IRQ is shared with SCI").
The original commit also showed problems with AC adapter:
* On HP 635 G7 detaching or attaching AC during suspend will cause
the system not to wakeup
* On Asus vivobook to prevent detaching AC causing resume problems
* On Lenovo 14ARE05 to prevent detaching AC causing resume problems
* On HP ENVY x360 to prevent detaching AC causing resume problems
Detaching AC adapter causing problems appears to have been a problem
because the EC SCI went off to notify the OS of the power adapter change
but the SCI was ignored and there was no other way to wake up this system
since GPIO controller wasn't properly enabled. The wakeups were fixed by
enabling the GPIO controller in commit acd47b9f28 ("pinctrl: amd: Handle
wake-up interrupt").
I've confirmed on a variety of OEM notebooks with the following test
1) echo 1 | sudo tee /sys/power/pm_debug_messages
2) sudo systemctl suspend
3) unplug AC adapter, make sure system is still asleep
4) wake system from lid (which is provided by ACPI SCI on some of them)
5) dmesg
a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time
until AC adapter plug out)
b) see timekeeping for Y seconds until woke (matching ~time from AC
adapter until lid event)
6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats
"Time (in us) in S0i3" = X + Y - firmware processing time
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Using DMA_BIT_MASK(64) as an initializer for a global variable
causes problems with Clang 12.0.1. The compiler doesn't understand
that value 64 is excluded from the shift at compile time, resulting
in a build error.
While this is a compiler problem, avoid the issue by setting up
the dma_mask memory as part of struct hv_device, and initialize
it using dma_set_mask().
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Vitaly Chikunov <vt@altlinux.org>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 743b237c3a ("scsi: storvsc: Add Isolation VM support for storvsc driver")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/1644176216-12531-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYgBPohQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5d5oAP99Iuskwx22LvkTsq/wtpncbpOq7PCn
m2by5qy3oSbLagD/YRDLh3ilgcvBbf152JBAOl4SRkph7bX/MGF14UZ0Zwg=
=OFwx
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: c2e5df616e ("vmbus: add per-channel sysfs info")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Juan Vazquez <juvazq@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203173008.43480-1-linmq006@gmail.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
-----BEGIN PGP SIGNATURE-----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=hMu7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIBTAUACgkQmmx57+YA
GNlaVQ//ZbsAo+lxUQbMl7XZ8k9ATrYnY99c3KY0c6Nl3vaf9gR6VFJ3Wy+Z1EeY
55lIwVXQ0XriUjw+O5DulWg97aHBvMhgsMRwHShdVHTFekDzod3wtixObfPdXEa9
oesKiYEjyPEHnjqrRJf7bOP+Ah6jc3BUtqVUIQ6Ks33q+rCGEy16vLIa4q10keqH
qq/CNCZrkBUmpCtVD9wjFuVzsXcdbFVWuWfF9/cdj6M5IZ2J1ZOE6K2fbTd7Aidn
CsT5KWQU7jp9WrSGDlyVgYcKWrav0vVHCDRszjXbDdhauCTBl7wVUmmsy9yhhwIl
ro91Q5yJR6bBuzeVlab2Y5S5Y3M7garHSzquZIHGr0/B3SevAmWczwwfEOHj5qZ8
2tEN5KmHxBNmez8m6L50rUeLamfcLwQgWGgUatyEyudLOYlqTuFA4u0ck/AFefvE
+QNhohngSxifXzIERW45E2V6NkGH2O877M/TbUPxcjBBYu6QhSgIfwvx1IlWGjTb
kH4Ucod6m34PNVbGQbaxAQrN3CrYkHzRdZ6CRFYpEufRdxSQso9hv0FaAxf0YukP
Zlf76V58fjpoORd8dWwQMZrNA7eVPI46rud0gLWNHw7f1LdascHzaQIdAY1fEUyt
Wldd/uOzRPNYcN+9uDDDPciUi5Ws3cOG533WoYjHu0CmbxfQN/Q=
=iogZ
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps
A series of fixes for omap variants for minor issues, and a fix for a timer
regression for some omap3 beagleboard versions.
The timer fix needs to patch both the dts and the timer code because
otherwise the timer quirk handling for old dtbs will prevent the dts fix
from working.
The other changes are for issues found by automated analysis, a macasp
typo fix, and two cosmetic fixes for clocks.
* tag 'omap-for-v5.17/fixes-for-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Don't use legacy clock defines for dra7 clkctrl
clk: ti: Move dra7 clock devices out of the legacy section
ARM: dts: Fix timer regression for beagleboard revision c
ARM: dts: am335x-wega: Fix typo in mcasp property rx-num-evt
ARM: OMAP2+: adjust the location of put_device() call in omapdss_init_of
ARM: OMAP2+: hwmod: Add of_node_put() before break
Link: https://lore.kernel.org/r/pull-1641801310-149268@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some of the tests are using x86_64 ABI-specific syscall entry points
(such as __x64_sys_nanosleep and __x64_sys_getpgid). Update them to use
architecture-dependent syscall entry names.
Also update fexit_sleep test to not use BPF_PROG() so that it is clear
that the syscall parameters aren't being accessed in the bpf prog.
Note that none of the bpf progs in these tests are actually accessing
any of the syscall parameters. The only exception is perfbuf_bench, which
passes on the bpf prog context into bpf_perf_event_output() as a pointer
to pt_regs, but that looks to be mostly ignored.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e35f7051f03e269b623a68b139d8ed131325f7b7.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
On architectures that don't use a syscall wrapper, sys_* function names
are set as an alias of __se_sys_* functions. Due to this, there is no
BTF associated with sys_* function names. This results in some of the
test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this
issue.
Fixes: 38261f369f ("selftests/bpf: Fix probe_user test failure with clang build kernel")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/013d632aacd3e41290445c0025db6a7055ec6e18.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
On an overcommitted system which is running multiple workloads of
varying priorities, it is preferred to trigger an oom-killer to kill a
low priority workload than to let the high priority workload receiving
ENOMEMs. On our memory overcommitted systems, we are seeing a lot of
ENOMEMs instead of oom-kills because io_uring_setup callchain is using
__GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and
allow the oom-killer to kill a lower priority job.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20220125051736.2981459-1-shakeelb@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In io_recv(), if import_single_range() fails, the @flags variable is
uninitialized, then it will goto out_free.
After the goto, the compiler doesn't know that (ret < min_ret) is
always true, so it thinks the "if ((flags & MSG_WAITALL) ..." path
could be taken.
The complaint comes from gcc-9 (Debian 9.3.0-22) 9.3.0:
```
fs/io_uring.c:5238 io_recvfrom() error: uninitialized symbol 'flags'
```
Fix this by bypassing the @ret and @flags check when
import_single_range() fails.
Reasons:
1. import_single_range() only returns -EFAULT when it fails.
2. At that point, @flags is uninitialized and shouldn't be read.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: "Chen, Rong A" <rong.a.chen@intel.com>
Link: https://lore.gnuweeb.org/timl/d33bb5a9-8173-f65b-f653-51fc0681c6d6@intel.com/
Cc: Pavel Begunkov <asml.silence@gmail.com>
Suggested-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Fixes: 7297ce3d59 ("io_uring: improve send/recv error handling")
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gmail.com>
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Link: https://lore.kernel.org/r/20220207140533.565411-1-ammarfaizi2@gnuweeb.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a followup to the previous commit f15309d7ad ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.
Fixes: f15309d7ad ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The CLKT register contains at poweron 0x40, which at our typical 100kHz
bus rate means .64ms. But there is no specified limit to how long devices
should be able to stretch the clocks, so just disable the timeout. We
still have a timeout wrapping the entire transfer.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
BugLink: https://github.com/raspberrypi/linux/issues/3064
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add Alain as sti maintainer for both drm/sti & cec/sti.
Add Raphaël as stm maintainer for drm/stm.
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/20220113171921.17466-3-philippe.cornu@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Link: https://lore.kernel.org/r/20220113171921.17466-2-philippe.cornu@foss.st.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 15512021eb)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b3dcc6dc0f)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit eef1739544)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Architectures others than x86 have a stub implementation calling
WARN_ON_ONCE(). The appropriate headers need to be included, otherwise
the header-test target will fail with:
HDRTEST drivers/gpu/drm/i915/i915_mm.h
In file included from <command-line>:
./drivers/gpu/drm/i915/i915_mm.h: In function ‘remap_io_mapping’:
./drivers/gpu/drm/i915/i915_mm.h:26:2: error: implicit declaration of function ‘WARN_ON_ONCE’ [-Werror=implicit-function-declaration]
26 | WARN_ON_ONCE(1);
| ^~~~~~~~~~~~
v2: Do not include <linux/printk.h> since call to pr_err() has been
removed
Fixes: 67c430bbaa ("drm/i915: Skip remap_io_mapping() for non-x86 platforms")
Cc: Siva Mullati <siva.mullati@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Siva Mullati <siva.mullati@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220131165926.3230642-3-lucas.demarchi@intel.com
(cherry picked from commit 377c675f3c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The i915_ttm_accel_move() function may return error codes that should
be propagated further up the stack rather than consumed assuming that
the accel move failed and could be replaced with a memcpy move.
For -EINTR, -ERESTARTSYS and -EAGAIN, just propagate those codes, rather
than retrying with a memcpy move.
Fixes: 2b0a750caf ("drm/i915/ttm: Failsafe migration blits")
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201070340.16457-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 29b9702ffe)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently we allow DRRS on IVB PCH ports, but we're missing a
few programming steps meaning it is guaranteed to not work.
And on HSW DRRS is not supported on anything but port A ever
as only transcoder EDP has the M2/N2 registers (though I'm
not sure if HSW ever has eDP on any other port).
Starting from BDW all transcoders have the dynamically
reprogrammable M/N registers so DRRS could work on any
port.
Stop initializing DRRS on ports where it cannot possibly work.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220128103757.22461-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit f0d4ce59f4)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We call __save_depot_stack() unconditionally so the stack depot
must always be initialized or else we'll oops on platforms without
runtime pm support.
Presumably we've not seen this in CI due to stack_depot_init()
already getting called via drm_mm_init()+CONFIG_DRM_DEBUG_MM.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com> # stackdepot
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Fixes: 2dba5eb1c7 ("lib/stackdepot: allow optional init and stack_table allocation by kvmalloc()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220126081539.23227-1-ville.syrjala@linux.intel.com
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 751a9d69b1)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Call mv88e6xxx_reg_unlock(chip) before returning on this error path.
Fixes: 7af4a361a6 ("net: dsa: mv88e6xxx: Improve isolation of standalone ports")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The <= ARRAY_SIZE() needs to be < ARRAY_SIZE() to prevent an out of
bounds error.
Fixes: d4ebf12bce ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the device that supports the TX push capability, the BD can
be directly copied to the device memory. However, due to hardware
restrictions, the push mode can be used only when there are no
more than two BDs, otherwise, the doorbell mode based on device
memory is used.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Fixes: d9fe64e511 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8168d_2_hw_phy_config() shares quite some functionality with
rtl8168d_1_hw_phy_config(), so let's factor out the common part to a
new function rtl8168d_1_common(). In addition improve the code a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f9222138 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add SIP and DIP mangling support
Danielle says:
On Spectrum-2 onwards, it is possible to overwrite SIP and DIP address
of an IPv4 or IPv6 packet in the ACL engine. That corresponds to pedit
munges of, respectively, ip src and ip dst fields, and likewise for ip6.
Offload these munges on the systems where they are supported.
Patchset overview:
Patch #1: introduces SIP_DIP_ACTION and its fields.
Patch #2-#3: adds the new pedit fields, and dispatches on them on
Spectrum-2 and above.
Patch #4 adds a selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks that pedit adjusts source and destination
addresses of IPv4 and IPv6 packets.
Output example:
$ ./pedit_ip.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: dev swp2 ingress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp2 ingress pedit ip6 dst set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 dst set 2001:db8:2::1 [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
