Clang warns:
../drivers/tty/synclink_gt.c:1337:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if (C_CRTSCTS(tty)) {
^
../drivers/tty/synclink_gt.c:1335:2: note: previous statement is here
if (I_IXOFF(tty))
^
../drivers/tty/synclink_gt.c:2563:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
^
../drivers/tty/synclink_gt.c:2561:2: note: previous statement is here
if (I_INPCK(info->port.tty))
^
../drivers/tty/synclink_gt.c:3221:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
set_signals(info);
^
../drivers/tty/synclink_gt.c:3219:2: note: previous statement is here
else
^
3 warnings generated.
The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/822
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218023912.13827-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns:
../drivers/tty/synclinkmp.c:1456:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if (C_CRTSCTS(tty)) {
^
../drivers/tty/synclinkmp.c:1453:2: note: previous statement is here
if (I_IXOFF(tty))
^
../drivers/tty/synclinkmp.c:2473:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
info->port.tty->hw_stopped = 0;
^
../drivers/tty/synclinkmp.c:2471:7: note: previous statement is here
if ( debug_level >= DEBUG_LEVEL_ISR )
^
../drivers/tty/synclinkmp.c:2482:8: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
info->port.tty->hw_stopped = 1;
^
../drivers/tty/synclinkmp.c:2480:7: note: previous statement is here
if ( debug_level >= DEBUG_LEVEL_ISR )
^
../drivers/tty/synclinkmp.c:2809:3: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
^
../drivers/tty/synclinkmp.c:2807:2: note: previous statement is here
if (I_INPCK(info->port.tty))
^
../drivers/tty/synclinkmp.c:3246:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
set_signals(info);
^
../drivers/tty/synclinkmp.c:3244:2: note: previous statement is here
else
^
5 warnings generated.
The indentation on these lines is not at all consistent, tabs and spaces
are mixed together. Convert to just using tabs to be consistent with the
Linux kernel coding style and eliminate these warnings from clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/823
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20191218024720.3528-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tpk_write()/tpk_close() could be interrupted when holding a mutex, then
in timer handler tpk_write() may be called again trying to acquire same
mutex, lead to deadlock.
Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP
enabled:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:938
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1
1 lock held by swapper/1/0:
...
Call Trace:
<IRQ>
dump_stack+0x197/0x210
___might_sleep.cold+0x1fb/0x23e
__might_sleep+0x95/0x190
__mutex_lock+0xc5/0x13c0
mutex_lock_nested+0x16/0x20
tpk_write+0x5d/0x340
resync_tnc+0x1b6/0x320
call_timer_fn+0x1ac/0x780
run_timer_softirq+0x6c3/0x1790
__do_softirq+0x262/0x98c
irq_exit+0x19b/0x1e0
smp_apic_timer_interrupt+0x1a3/0x610
apic_timer_interrupt+0xf/0x20
</IRQ>
See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for
more details.
Fix it by using spinlock in process context instead of mutex and having
interrupt disabled in critical section.
Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Ellerman made a call for volunteers from NXP to maintain
this driver and I offered myself.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Timur Tabi <timur@kernel.org>
Link: https://lore.kernel.org/r/20200114110012.17351-1-laurentiu.tudor@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the applications like microcom do not work if
modem is disabled. To fix them we always return
TIOCM_CTS | TIOCM_DSR | TIOCM_CAR instead of 0 when
using cts_override. Make get_mctrl return actual status
when not using cts_override.
Signed-off-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Link: https://lore.kernel.org/r/1574687731-21563-1-git-send-email-shubhrajyoti.datta@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During db410c stress test and when the system is low on memory,
the UART/console becomes unresponsive and never recover back.
This has been narrowed down to the msm_start_rx_dma which does
not manage error cases correctly (e.g. dma mapping failure),
indeed, when an error happens, dma transfer is simply discarded
and so never completed, leading to unconfigured RX path.
This patch fixes this issue by switching to SW/FIFO mode in case
of DMA issue. This mainly consists in resetting the receiver to
apply RX BAM/DMA disabling change and re-enabling the RX level
and stale interrupts (previously disabled for DMA transfers).
The DMA will be re-enabled once memory is available since the
SW/FIFO read function (msm_handle_rx_dm) retries to start dma
on completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1578646684-17379-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8250 driver can probe for many variants of the venerable 16550A
serial port. Some of those probes involve long (20ms) mdelay calls,
which delay system boot. Modern systems and virtual machines don't have
those variants.
Provide a Kconfig option to disable probes for 16550A variants.
Disabling this speeds up the boot of a virtual machine with a serial
console by more than 20ms (a substantial fraction of the ~100ms needed
to boot a carefully configured VM).
Before:
[ +0.021919] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
After:
[ +0.000097] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/20200111022513.GA166267@localhost
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Synchronize only the dirty part of DMA buffer in order to avoid
unnecessary overhead of syncing of the clean part, which is the case
of every serial DMA transfer in practice.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200112180919.5194-3-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows DMA engine to go into runtime-suspended mode whenever there is
no data to receive, instead of keeping DMA active all the time while TTY
is opened (i.e. permanently active in practice, like in the case of UART
Bluetooth).
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20200112180919.5194-2-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few trivial clean up:
* Make ipq4019_regulator_voltage_ops and vmmc_regulator const
* Make ipq4019_vmmcq_regmap_config static
* Use regulator_map_voltage_ascend
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200114065847.31667-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is using devm_regulator_register() so no need to call
regulator_unregister() in ipq4019_regulator_remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200114065847.31667-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit f5fa59a61e "regulator: bindings: add
document bindings for mpq7920" as Rob has a number of problems
with the use of DT schema.
Signed-off-by: Mark Brown <broonie@kernel.org>
Output on success:
1..1
ok 1 exec
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output on failure:
1..1
not ok 1 36016 16
Bail out!
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-35-dima@arista.com
Output on success:
1..4
ok 1 host: clock: monotonic cycles: 148323947
ok 2 host: clock: boottime cycles: 148577503
ok 3 ns: clock: monotonic cycles: 137659217
ok 4 ns: clock: boottime cycles: 137959154
# Pass 4 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP need to run as root
Output without support of time namespaces:
1..4
ok 1 host: clock: monotonic cycles: 145671139
ok 2 host: clock: boottime cycles: 146958357
not ok 3 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-34-dima@arista.com
Check that timer_create() takes into account clock offsets.
Output on success:
1..3
ok 1 clockid=7
ok 2 clockid=1
ok 3 clockid=9
# Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..3
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..3
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-33-dima@arista.com
Check that /proc/uptime is correct inside a new time namespace.
Output on success:
1..1
ok 1 Passed for /proc/uptime
# Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..1
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..1
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-32-dima@arista.com
Check that clock_nanosleep() takes into account clock offsets.
Output on success:
1..4
ok 1 clockid: 1 abs:0
ok 2 clockid: 1 abs:1
ok 3 clockid: 9 abs:0
ok 4 clockid: 9 abs:1
Output with lack of permissions:
1..4
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..4
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-31-dima@arista.com
Check that timerfd_create() takes into account clock offsets.
Output on success:
1..3
ok 1 clockid=7
ok 2 clockid=1
ok 3 clockid=9
# Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output on failure:
1..3
not ok 1 clockid: 7 elapsed: 0
not ok 2 clockid: 1 elapsed: 0
not ok 3 clockid: 9 elapsed: 0
Bail out!
Output with lack of permissions:
1..3
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..3
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-30-dima@arista.com
A test to check that all supported clocks work on host and inside
a new time namespace. Use both ways to get time: through VDSO and
by entering the kernel with implicit syscall.
Introduce a new timens directory in selftests framework for
the next timens tests.
Output on success:
1..10
ok 1 Passed for CLOCK_BOOTTIME (syscall)
ok 2 Passed for CLOCK_BOOTTIME (vdso)
ok 3 Passed for CLOCK_BOOTTIME_ALARM (syscall)
ok 4 Passed for CLOCK_BOOTTIME_ALARM (vdso)
ok 5 Passed for CLOCK_MONOTONIC (syscall)
ok 6 Passed for CLOCK_MONOTONIC (vdso)
ok 7 Passed for CLOCK_MONOTONIC_COARSE (syscall)
ok 8 Passed for CLOCK_MONOTONIC_COARSE (vdso)
ok 9 Passed for CLOCK_MONOTONIC_RAW (syscall)
ok 10 Passed for CLOCK_MONOTONIC_RAW (vdso)
# Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
Output with lack of permissions:
1..10
not ok 1 # SKIP need to run as root
Output without support of time namespaces:
1..10
not ok 1 # SKIP Time namespaces are not supported
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-29-dima@arista.com
API to set time namespace offsets for children processes, i.e.:
echo "$clockid $offset_sec $offset_nsec" > /proc/self/timens_offsets
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-28-dima@arista.com
The VVAR page layout depends on whether a task belongs to the root or
non-root time namespace. Whenever a task changes its namespace, the VVAR
page tables are cleared and then they will be re-faulted with a
corresponding layout.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-27-dima@arista.com
As timens page has offsets to data on VVAR page VVAR is going
to be accessed shortly. Set it up with timens in one page fault
as optimization.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-26-dima@arista.com
If a task belongs to a time namespace then the VVAR page which contains
the system wide VDSO data is replaced with a namespace specific page
which has the same layout as the VVAR page.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-25-dima@arista.com
VDSO support for Time namespace needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page contains time namespace clock offsets and it
has vdso_data->seq set to 1 to enforce the slow path and
vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time namespace
handling path.
Allocate the timens page during namespace creation. Setup the offsets
when the first task enters the ns and freeze them to guarantee the pace
of monotonic/boottime clocks and to avoid breakage of applications.
The design decision is to have a global offset_lock which is used during
namespace offsets setup and to freeze offsets when the first task joins the
new time namespace. That is better in terms of memory usage compared to
having a per namespace mutex that's used only during the setup period.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Based-on-work-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-24-dima@arista.com
To support time namespaces in the VDSO with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide VDSO data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the VDSO data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
Allocate the time namespace page among VVAR pages and place vdso_data on
it. Provide __arch_get_timens_vdso_data() helper for VDSO code to get the
code-relative position of VVARs on that special page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-23-dima@arista.com
VDSO support for time namespaces needs to set up a page with the same
layout as VVAR. That timens page will be placed on position of VVAR page
inside namespace. That page has vdso_data->seq set to 1 to enforce
the slow path and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce
the time namespace handling path.
To prepare the time namespace page the kernel needs to know the vdso_data
offset. Provide arch_get_vdso_data() helper for locating vdso_data on VVAR
page.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-22-dima@arista.com
To support time namespaces in the vdso with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide vdso data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the vdso data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
If VDSO time namespace support is disabled the whole magic is compiled out.
Initial testing shows that the disabled case is almost identical to the
host case which does not take the slow timens path. With the special timens
page installed the performance hit is constant time and in the range of
5-7%.
For the vdso functions which are not using the sequence count an
unconditional check for vdso_data->clock_mode is added which switches to
the real vdso when the clock_mode is VCLOCK_TIMENS.
[avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data
pointer by CS_RAW offset.]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
Forbid splitting VVAR VMA resulting in a stricter ABI and reducing the
amount of corner-cases to consider while working further on VDSO time
namespace support.
As the offset from timens to VVAR page is computed compile-time, the pages
in VVAR should stay together and not being partically mremap()'ed.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-20-dima@arista.com
Make sure that /proc/uptime is adjusted to the tasks time namespace.
Co-developed-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-19-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time, if the
TIMER_ABSTIME flag is set. This value is in the tasks time namespace,
which has to be converted to the host time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-18-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when the
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace and has to be converted to the host's time.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-16-dima@arista.com
Wire timer_settime() syscall into time namespace virtualization.
sys_timer_settime() calls the ktime->timer_set() callback. Right now,
common_timer_set() is the only implementation for the callback.
The user-supplied expiry value is converted from timespec64 to ktime and
then timens_ktime_to_host() can be used to convert namespace's time to the
host time.
Inside a time namespace kernel's time differs by a fixed offset from a
user-supplied time, but only absolute values (TIMER_ABSTIME) must be
converted.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-15-dima@arista.com
timerfd_settime() accepts an absolute value of the expiration time if
TFD_TIMER_ABSTIME is specified. This value is in the task's time namespace
and has to be converted to the host's time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-14-dima@arista.com
The helper subtracts namespace's clock offset from the given time
and ensures that the result is within [0, KTIME_MAX].
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-13-dima@arista.com
Adjust monotonic and boottime clocks with per-timens offsets. As the
result a process inside time namespace will see timers and clocks corrected
to offsets that were set when the namespace was created
Note that applications usually go through vDSO to get time, which is not
yet adjusted. Further changes will complete time namespace virtualisation
with vDSO support.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-12-dima@arista.com
Now, when the clock_get_ktime() callback exists, the suboptimal
timespec64-based conversion can be removed from common_timer_get().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-11-dima@arista.com
The callsite in common_timer_get() has already a comment:
/*
* The timespec64 based conversion is suboptimal, but it's not
* worth to implement yet another callback.
*/
kc->clock_get(timr->it_clock, &ts64);
now = timespec64_to_ktime(ts64);
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-10-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
Wire up alarm bases with get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-9-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a tasks time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
struct alarm_base needs to follow the same naming convention, so rename
.gettime() callback into get_ktime() as a preparation for introducing
get_timespec().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-8-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format in (struct k_clock).
As a preparation ground for introducing clock_get_ktime(), the original
callback clock_get() was renamed into clock_get_timespec().
Reflect the renaming into the callback implementations.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-7-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format, rather than in (struct timespec).
Rename the clock_get() callback to clock_get_timespec() as a preparation
for introducing clock_get_ktime().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-6-dima@arista.com
